87 resultat (1,62015 sekunder)

Märke

Butik

Pris (EUR)

Nollställ filter

Produkter
Från
Butiker

Journeys in Middle Earth Insert

Journeys in Middle Earth Insert

Insats kompatibel med Journeys in Middle-Earth® och Shadowed Paths®, Villains of Eriador® och Dwellers in Darkness® Expansions. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Insatsen är arrangerad i tre lager och använder de stora fyrkantiga stridskartabrickorna för att separera varje nivå. I vart och ett av de två nedre lagren finns en bunt med brickor för resan. De största och minsta brickorna går på det undre lagret (visas här till höger) och de medelstora brickorna går på det mellersta lagret (som visas till vänster). Detta är lätt nog att göra eftersom de större plattorna alla har en bredd på fyra eller fler hexar, och de medelstora en bredd på tre eller mindre. För att undvika tvivel finns en lista längre ner på sidan med numren på varje bricka som anger vilken som går var. Hjältekortfacket har plats för att korten ska förses med kvalitetshylsor. De två brickorna för spelkorten har fack som är dimensionerade för att matcha antalet av var och en av de 12 typerna av kort, inklusive att dela upp föremålskorten i bärbara föremål, rustningar och prydnadssaker. Återigen finns det utrymme för alla kort att sleetas med kvalitetshylsor. de tre lagren av brickor är åtskilda från varandra av de två stora fyrkantiga stridskartabrickorna. Detta hjälper till att hålla allt på plats, inklusive de två högarna med resekartabrickor. När du packar lådan, placera först regelböckerna ovanpå brickorna. Lägg till sist de två största resekartrutorna (numrerade 401 och 402) ovanpå reglerna. När den är fulladdad fylls lådan till toppen, vilket möjliggör vertikal förvaring. Denna produkt består av ett platt paket med 9 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert compatible with Journeys in Middle-Earth®, and the Shadowed Paths®, Villains of Eriador®, and Dwellers in Darkness® Expansions. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The insert is arranged in three layers, and uses the large square battle map tiles to separate each level. In each of the two lower layers there is a stack of journey map tiles. The largest and smallest tiles go on the bottom layer (shown here on the right) and the medium sized tiles go on the middle layer (as shown on the left). This is easy enough to do as they larger tiles all have a width of four or more hexes, and the medium ones a width of three or less. For the avoidance of doubt there is a list further down the page with the numbers of each tile indicating which goes where. The hero card tray has space for the cards to be sleeved with quality sleeves. The two trays for the game cards have slots sized to match the quantity of each of the 12 types of card, including splitting the item cards into carried items, armour, and trinkets. Again there is space for all cards to be sleeved with quality sleeves. the three layers of trays are separated from each other by the two large square battle map tiles. This helps keep everything in place, including the two stacks of journey map tiles. When packing the box first place the rule books on top of the trays. Lastly place the two largest journey map tiles (numbered 401 and 402) on top of the rules. Once fully loaded the box is filled to the top, allowing for vertical storage. This product consists of a flat-pack of 9 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 499.00
1

Clank! In! Space! Insert v2

Clank! In! Space! Insert v2

Obs: Insats designad för spel med ytterlådans mått på 31,0 x 31,0 x 9,4 cm. Detta är den reviderade designen för Clank! I! Space!®. Insats kompatibel med Clank! I! Space!®, inklusive Cyber ​​Station 11®, Apocalypse!® och Clank! I! Utrymme! Äventyr: Pulsarcade®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Det finns utrymme för alla kort att sleetas. Insatsen är anordnad i upp till två lager. Spelet har många olika formade brädor, kolla nedan för den rekommenderade metoden för att lägga till dem i insatsen. Om det läggs till som visas längst ner på sidan kan spelet lagras vertikalt. Det finns spelarbrickor för varje spelarfärg och resursbrickor som kan användas under spelets gång. Alla kortfack är dimensionerade för att passa kort med hylsor. Det finns en separat bricka för schemakorten (som också kan sleeves) och träbossen meeples. Förutom den stora facket för att lagra äventyrslekkorten vertikalt, finns det två mindre fack för att lagra startspelarens kortlekar och reservkorten, för att göra inställningen av spelet mycket snabbare. När du packar lådan, placera först den största biten av huvudspelbrädet (kommandot) ovanpå insatsfacken. Detta fungerar som ett lock på brickorna under. Placera sedan schemakortfacket på sin plats tillsammans med de nio sexkantiga bräddelarna, med bosspåsen uppvikt mellan dem. Lägg sedan till Master Control-kortet från Pulsearcade, följt av de böjda skivorna och andra mindre kartongbitar. Lägg till sist de större bräddelarna och sedan regelböckerna. Detta fyller lådan och möjliggör vertikal lagring av spelet. FS-CLKSPv2 är ett inofficiellt speltillbehör från tredje part. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 5 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for game with external box dimensions of 31.0 x 31.0 x 9.4 cm. This is the revised design for Clank! In! Space!®. Insert compatible with Clank! In! Space!®, including Cyber Station 11®, Apocalypse!®, and Clank! In! Space! Adventures: Pulsarcade®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. There is space for all cards to be sleeved. The insert is arranged in up to two layers. The game has many different shaped boards, check below for the recommended method of adding them to the insert. If added as shown at the bottom of the page, the game can be stored vertically. There are player trays for each player colour, and resource trays that can be utilised during game play. All the card trays are sized to fit sleeved cards. There is a separate tray for the scheme cards (which can also be sleeved) and the wooden boss meeples. In addition to the large tray to store the adventure deck cards vertically, there are two smaller trays to store the starting player decks and the reserve cards, to make setting up the game much quicker. When packing the box, first place the largest piece of the main game board (the Command) on top of the insert trays. This acts as a lid on the trays beneath. Then place the scheme card tray in its spot along with the nine hexagon board pieces, with the boss bag folded up between them. Next add the Master Control board from Pulsearcade, followed by the curved board pieces and other smaller cardboard pieces. Finally, place the larger board pieces and then the rulebooks. This fills the box and allows for vertical storage of the game. FS-CLKSPv2 is a third party, unofficial game accessory. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD. This product consists of a flat-pack of 5 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 323.00
1

Clank! In! Space! Insert

Clank! In! Space! Insert

Obs: Insats avsedd för spel med ytterlådans mått på 31,0 x 31,0 x 9,4 cm. Insats kompatibel med Clank! I! Space!® inklusive expansionerna Cyber ​​Station 11® och Apocalypse!®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Det finns utrymme för alla kort att sleetas. Spelet har många olika formade brädor, kolla nedan för den rekommenderade metoden för att lägga till dem i insatsen. Om det läggs till enligt bilden kan spelet lagras vertikalt. Varje spelare får en egen bricka. Schemakortens fack har plats för dessa att hylsa och lagrar även träbossmarkörerna. Insatsen innehåller en stor bricka för vertikal förvaring av de stora äventyrskorten. Brickdesignen gör att alla kort kan sleetas. Denna bricka hjälper också till att placera brädorna och andra insatsbrickor vid packning av lådan. När du packar lådan, placera först den största biten av huvudspelbrädet (kommandot) ovanpå insatsfacken. Detta fungerar som ett lock på brickorna under. Placera sedan Clanken! områdesbräda, korridor och marknadstavla, följt av de fem böjda skivorna från Cyber ​​Station 11®-expansionen. Placera sedan de sex hexagonbrädorna enligt bilden, och rulla ihop bosspåsen och placera den mellan brädorna och hörnet på den stora kortfacket. De två sista bräddelarna går överst med regelböckerna. Detta fyller lådan och möjliggör vertikal lagring av spelet. Denna produkt består av ett platt paket med 6 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for games with external box dimensions of 31.0 x 31.0 x 9.4 cm. Insert compatible with Clank! In! Space!® including the Cyber Station 11® and Apocalypse!® expansions. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. There is space for all cards to be sleeved. The game has many different shaped boards, check below for the recommended method of adding them to the insert. If added as shown, the game can be stored vertically. Each player gets a tray of their own. The scheme cards' tray has space for these to be sleeved and also stores the wooden boss markers. The insert includes one large tray for vertical storage of the large adventure deck cards. The tray design allows for all cards to be sleeved. This tray also helps in positioning the boards and other insert trays when packing the box. When packing the box, first place the largest piece of the main game board (the Command) on top of the insert trays. This acts as a lid on the trays beneath. Then place the Clank! area board, Corridor, and market board, followed by the five curved board pieces from the Cyber Station 11® expansion. Next place the six hexagon board pieces as shown, and roll up the boss bag and place it between the boards and the corner of the large card tray. The last two board pieces go on top with the rule books. This fills the box and allows for vertical storage of the game. This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 317.00
1

Food Chain Magnate Insert

Food Chain Magnate Insert

Insats avsedd för spel med ytterlådans mått på 31,2 x 22,1 x 5,8 cm. Observera också att när det är fullt laddat lyfts locket med 4 mm. Insats kompatibel med Food Chain Magnate®, eller separat med The Ketchup Mechanism & Other Ideas® Expansion. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Reglerna och spelarmenyerna fungerar som ett lock ovanpå brickorna. Om du äger både spelet och expansionen behöver du två FS-FCM-insatser, en för varje box. Observera att kartbrickorna är placerade i två högar om tio på vänster sida av rutan. Insatsen innehåller fack för att lagra och organisera alla spelkomponenter som visas här. Kortfacken är dimensionerade så att alla kort kan omslutas. När insatsen ska användas i expansionen The Ketchup Mechanism & Other Ideas® har tre av brickorna en alternativ monteringsmetod. Genom att använda dessa variant 2-designer av dessa brickor kan alla expansionskomponenter förvaras och organiseras i expansionslådan. I det här fallet är kartbrickorna ordnade i två högar med tre brickor. Den stora mat- och dryckesbrickan är byggd med högre väggar för att förvara de större bitarna och nya mattyperna. Brickan för sedlar är omarbetad för att lagra polletter och brickor. Och huset och marknadsföringsbrickan är omarbetad utan avdelare så att den kan lagra de större koks- och ölbitarna. Observera att ytterligare sjätte spelares restaurangkedjebrickor och nya marknadsföringsbrickor från The Ketchup Mechanism & Other Ideas®-expansion bör läggas till de relevanta brickorna från basspelet. När du packar lådan, placera först vändbeställningsspåret i urtaget i det stora kortfacket och den största marknadsföringsbrickan ovanpå papperspengarna. Lägg sedan spelarmenyerna i två högar ovanpå brickorna. Om du äger expansionen bör den sjätte spelarmenyn läggas till här också. Lägg sist regelboken ovanpå allt. Detta fyller hela lådan och möjliggör vertikal lagring av spelet. När du använder insatsen för expansionen av Ketchup Mechanism & Other Ideas® placeras plattan på landsbygden ovanpå de mindre nya matbitarna i trä. När den är fulladdad lyfts lådans lock med 4 mm. Detta var oundvikligt när det fanns tillräckligt med utrymme för kort med hylsor i designen. Observera att detta locklyft uppnås förutsatt att lådan endast innehåller en av de två språkuppsättningarna av menyer och regelböcker. Denna produkt består av ett platt paket med 4 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert designed for game with external box dimensions of 31.2 x 22.1 x 5.8 cm. Note also that when fully loaded the lid will lift by 4 mm. Insert compatible with Food Chain Magnate®, or separately with The Ketchup Mechanism & Other Ideas® Expansion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and player menus act as a lid on top of the trays. If you own both the game and the expansion, you will need two FS-FCM inserts, one for each box. Note that the map tiles are placed in two stacks of ten on the left hand side of the box. The insert includes trays for storing and organising all of the game components as shown here. The card trays are sized so that all cards can be sleeved. When the insert is to be used in The Ketchup Mechanism & Other Ideas® expansion three of the trays have an alternative method of assembly. Using these variant 2 designs of these trays all the expansions's components can be stored and organisied in the expansion box. In this case the map tiles are arranged in two stacks of three tiles. The large food and drink tray is built with taller walls to store the larger pieces and new food types. The tray for money bills is re-worked to store tokens and tiles. And the house and marketing tile tray is re-worked without dividers so it can store the bigger coke and beer pieces. Note that the additional sixth player restaurant chain tiles and new marketing tiles from The Ketchup Mechanism & Other Ideas® expansion should be added to the relevant trays from the base game. When packing the box, first place the turn order track into the recess provided in the large card tray and the largest marketing tile on top of the paper money. Next place the player menus in two stacks on top of the trays. If you own the expansion the sixth player menu should be added here too. Lastly place the rule book on top of everything. This fully fills the box and allows for vertical storage of the game. When using the insert for The Ketchup Mechanism & Other Ideas® expansion the rural area tile is placed on top of the smaller new wooden food pieces. When fully loaded the box lid will lift by 4mm. This was

SEK 230.00
1

Roll Player Insert

Roll Player Insert

Obs: Insats avsedd för spel med externa mått på lådan 31,8 x 22,7 x 5,0 cm för expansionslådan och 31,8 x 22,7 x 7,3 cm för butikslådan. Eller alternativt Big Box-varianten med måtten 31,8 x 22,7 x 12,2 cm. Insats kompatibel med Roll Player®, och Monsters & Minions® och Fiends & Familiars® expansioner. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Standardspeltärningarna förvaras i tärningspåsen. Insatsen är anordnad i antingen två separata layouter i butiksboxen plus en expansionsbox, alternativt alla tillsammans i Big Box-varianten. Brickorna i mitten av lådan är ordnade i två lager, med monsterkortet och XP-kubbrickorna på det nedre lagret. Kortfacken har plats för alla kort som kan sleetas med kvalitetshylsor. Om du äger Big Box-varianten av spelet placeras de två uppsättningarna av brickor som visas ovan helt enkelt ovanpå varandra. De återstående brickorna placeras i botten av Big Box, återigen med tärningspåsen i det nedre högra hörnet. Brickorna fungerar lika bra med metallmynten och de linsformade monterkorten, som kan omslutas. Det finns också plats för de sex korten från lockup-paketet. Du kan lägga till minotaur- och frogkin-spelbrädorna också, men du kommer att ha 1-2 mm locklyft, vilket knappast märks med denna typ av box. Polletterna från dessa extrabrädor passar bra i de relevanta tokenbrickorna. När du packar lådan är det sista att lägga till de tre regelböckerna. Dessa går antingen i expansionslådan (som visas till vänster), eller ovanpå alla brickor i Big Box (som visas till höger). När de är fulladdade är alla tre lådtyperna fyllda till toppen, vilket möjliggör vertikal förvaring. Denna produkt består av ett platt paket med 5 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for games with external box dimensions of 31.8 x 22.7 x 5.0 cm for the expansion box, and 31.8 x 22.7 x 7.3 cm for the retail box. Or alternatively the Big Box variant with dimensions 31.8 x 22.7 x 12.2 cm. Insert compatible with Roll Player®, and Monsters & Minions® and Fiends & Familiars® expansions. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The standard game dice are stored in the dice bag. The insert is arranged in either in two separate layouts in the retail box plus one expansion box, or alternatively all together in the Big Box variant. The trays in the middle of the box are arranged in two layers, with the monster card and XP cube trays on the bottom layer. The card trays have space for all cards to be sleeved with quality sleeves. If you own the Big Box variant of the game, the two sets of trays shown above are simply placed one on top of the other. The remaining trays are placed in the bottom of the Big Box, again with the dice bag in the bottom right corner. The trays work equally well with the metal coins and the lenticular monter cards, which can be sleeved. There is also space for the six cards from the lockup pack. You can add the minotaur and frogkin player boards too, but you will have 1-2 mm of lid lift, which is hardly noticable with this kind of box. The tokens from these additional boards fit fine in the relevant token trays. When packing the box, the last thing to add are the three rule books. These go either in the expansion box (as shown on the left), or on top of all the trays in the Big Box (as shown on the right). Once fully loaded all three box types are filled to the top, allowing for vertical storage. This product consists of a flat-pack of 5 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 317.00
1

Dominion Insert

Dominion Insert

Obs: Insats designad för spel med ytterlådans mått på 29,7 x 29,7 x 7,3 cm. Officiell insats kompatibel med Dominion®, med plats för 1 100 sleeved eller 1 850 unsleeved kort. Designen ger både effektiv förvaring och förbättrat spelande, med löstagbara tokenbrickor för användning under spelet. Regelböckerna fungerar som ett lock ovanpå brickorna. Brickorna är ordnade i upp till tre lager, där huvuddelen av insatsen tas upp av en stor kortbricka. Båda kortfacken har plats för sleeved cards. Insatsen kan placeras i antingen basspellådan eller någon av de stora expansionslådorna. Den har även två olika layouter beroende på om du behöver mer tokenförvaring eller fler spelmattor. Huvudfacket är för kort, och det har olika urtag i sig för att underlätta åtkomst till andra fack och möjliggöra förvaring av mattor. Alla kortfack är dimensionerade för kort med hylsor. Mattorna som följer med expansionerna kan förvaras på ett flertal sätt beroende på hur du vill använda insatsen. De kan placeras i en bunt i det nedre hörnet som visas, och den andra triangulära brickan kan användas för att hålla dem på plats. Alternativt kan de placeras ovanpå korten i huvudkortfacket, där avdelare har en speciell urtagning som är dimensionerad för att förvara dem. När du packar lådan, placera först papperskorgen ovanpå det stora kortfacket i urtaget som är avsett för detta. Lägg sedan regelböckerna ovanpå. Detta fyller lådan helt och möjliggör vertikal förvaring. FS-DMN är en officiellt licensierad insticksprodukt tillverkad i samarbete med Rio Grande Games Inc. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom. Denna produkt består av ett platt paket med 4 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for game with external box dimensions of 29.7 x 29.7 x 7.3 cm. Official insert compatible with Dominion®, with space for 1,100 sleeved or 1,850 unsleeved cards. The design provides both efficient storage and improved game play, with removable token trays for use during the game. The rule books act as a lid on top of the trays. The trays are arranged in up to three layers, with the main part of the insert taken up by a large card tray. Both the card trays have space for sleeved cards. The insert can be placed in either the base game box or any of the large expansion boxes. It also has two different layouts depending on whether you need more token storage or more game mats. The main tray is for cards, and it has various recesses in it to eases access to other trays and allow for storage of mats. All the card trays are sized for sleeved cards. The mats that come with the expansions can be stored in a number of ways depending on how you want to use the insert. They can be placed in a stack in the bottom corner as shown, and the second triangular tray can used to hold them in place. Alternatively they can be placed on top of the cards in the main card tray, where the dividers have a special recess sized to store them.When packing the box, first place the Trash board on top of the large card tray in the recess provided for this. Then place the rule books on top. This fills the box completely and allows for vertical storage. FS-DMN is an officially licensed insert product made in partnership with Rio Grande Games Inc. All trademarks and copyrights remain the property of their respective owners. This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 235.00
1

Pandemic Insert

Pandemic Insert

Insats kompatibel med Pandemic® och On the Brink®, In the Lab® och State of Emergency®-expansionerna. Designen ger både effektiv lagring och förbättrat spel. Brickorna kan användas under spelet, och de underlättar i hög grad uppställnings- och röjningstider. Insatsen är anordnad i upp till två lager, med de fem petriskålarna på höger sida av lådan. två av petriskålarna placeras ovanpå en del av brickan längst ner till höger på bilden, som används för att lagra pris- och karantänmarkörerna. Var och en av de olika färgade sjukdomskuberna och cur emarkörerna placeras i motsvarande färgade petriskål. Alla komponenttyper är uppdelade efter typ som organiserar alla spelkomponenter. Det finns utrymme för korten att sleetas. Skivorna, regelböckerna och lokaliseringsplattan för bioterrorister måste förvaras separat i en av expansionslådorna. Denna produkt består av ett platt paket med 2 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert compatible with Pandemic® and the On the Brink®, In the Lab® and State of Emergency®expansions. The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The insert is arranged in up to two layers, with the five petri dishes arranged on the right hand side of the box. two of the petri dishes are placed on top of part of the tray on the bottom right of the image, which is used to store the award and quarantine markers. Each of the different colour disease cube and cur emarkers are placed in the corresponding coloured petri dish. All component types are split by type organising all the game components. There is space for the cards to be sleeved. The boards, rule books, and bio-terrorist location pad need to be stored separately in one of the expansion boxes.This product consists of a flat-pack of 2 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 173.00
1

Frost Punk Insert

Frost Punk Insert

Obs: Denna produkt är avsedd för en kartongstorlek på 31,8 x 31,8 x 14,3 cm. Insats kompatibel med Frostpunk®, inklusive Frostlander®-expansionen. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Tavlor och regelböcker fungerar som ett lock ovanpå brickorna.  Insatsen är anordnad i upp till fyra lager, med generatorn placerad högst upp i lådan enligt bilden. Påsarna för missnöje och hopp läggs till de två medföljande brickorna. När de är korrekt placerade i lådan håller de generatorn på plats, vilket hindrar den från att röra sig när spelet är i lager. Fälgbrädesbitarna placeras i en stapel i botten av lådan bredvid huvudkortfacket som visas. De två kortfacken är dimensionerade för kort med hylsor. Alla komponenter är sorterade efter typ och byggnadsbrickorna låter dig organisera brickorna och bläddra igenom dem för att få de du behöver. De två resursbrickorna fungerar lika bra med de valfria plastbitarna från Resources Expansion®. Genom att ha två brickor kan de placeras på vardera sidan av bordet vilket ger enkel åtkomst för alla spelare. När du packar lådan, placera först regelboken och scenarioboken ovanpå insatsfacken. Lägg sedan till ansvarsbladen och generatorbrickan. Lägg till sist alla återstående brädor i en enda stack. När den är fulladdad fylls lådan till toppen, vilket möjliggör vertikal förvaring. FS-FPUNK är ett inofficiellt speltillbehör från tredje part. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 8 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: This product is intended for a box size of 31.8 x 31.8 x 14.3 cm. Insert compatible with Frostpunk®, including the Frostlander® expansion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The boards and rulebooks act as a lid on top of the trays.  The insert is arranged in up to four layers, with the generator placed at the top of the box as shown. The discontent and hope bags are added to the two trays provided. When correctly placed in the box they hold the generator in place, stopping it from moving around when the game is in storage. The rim board pieces are placed in a stack in the bottom of the box next to the main card tray as shown. The two card trays are sized for sleeved cards. All the components are sorted by type and the building tiles trays allow you to organise the tiles and flip through them to get the ones you need. The two resource trays work equally well with the optional plastic pieces from the Resources Expansion®. Having two trays allows them to be placed on either side of the table giving easy access to all players. When packing the box first place the rulebook and scenario book on top of the insert trays. Next add the responsibility sheets and generator tile. Lastly add all the remaining boards in a single stack. Once fully loaded the box is filled to the top, allowing for vertical storage. FS-FPUNK is a third party, unofficial game accessory. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD. This product consists of a flat-pack of 8 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 433.00
1

Guild Academies of Valeria Insert

Guild Academies of Valeria Insert

Obs:  Denna produkt är avsedd för en kartongstorlek på 29,7 x 29,7 x 7,4 cm. Officiell fullfärgsinsats kompatibel med Guild Academies of Valeria®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Reglerna och brädorna fungerar som ett lock ovanpå brickorna. Det stora påfyllningsfacket i det övre vänstra hörnet kan förvara de fulla tärningarna och professorspåsarna, eller alternativt finns det tillräckligt med utrymme i det stora facket för att lagra alla tärningar och professorpolletter.  Varje spelare får sin egen spelarbricka för sina tokens och diskar. Det finns utrymme för alla kort att sleetas. Varje bricka innehåller bilder från regelboken eller spelkort och brädor. Varje spelarbricka har en guild-bild och är färgkodad för att matcha bitarna. Bilderna förbättrar brickornas utseende avsevärt, men hjälper också till i spelet, eftersom du omedelbart kan se vad som går vart. När du packar lådan, placera först spelbräda ovanpå brickorna i det avsedda urtaget. Lägg sedan till de sammansatta spelarbrädorna i två högar om två. Lägg till sist till regelboken som visas. Detta fyller lådan helt utan locklyft och möjliggör vertikal förvaring av spelet. FS-GAVAL är en officiellt licensierad insatsprodukt tillverkad i samarbete med Daily Magic Games®. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 4 Evacore-lakan. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note:  This product is intended for a box size of 29.7 x 29.7 x 7.4 cm. Official full colour insert compatible with Guild Academies of Valeria®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. The large filler tray in the top left hand corner can store the full dice and professor bags, or alternatively there is sufficient space in the large tray to store all the dice and professor tokens.  Each player receives their own player tray for their tokens and counters. There is space for all cards to be sleeved. Every tray includes images from the rulebook or game cards and boards. Each player tray has a guild image and is colour coded to match the pieces.The images greatly improve the look of the trays, but also help in game clear up as you can instantly see what goes where.When packing the box, first place the game board on top of the trays in the recess provided. Next add the assembled player boards in two stacks of two. Lastly add the rule book as shown. This fully fills the box without any lid lift and allows for vertical storage of the game. FS-GAVAL is an officially licensed insert product made in partnership with Daily Magic Games®. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD. This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 292.00
1

Call to Adventure Insert

Call to Adventure Insert

Obs: Insats avsedd för spel med ytterlådans mått på 23,5 x 30,1,5 x 8 cm. Officiell fullfärgsinsats kompatibel med Call to Adventure®. Det är separat kompatibelt med varje spel i Call to Adventure®-serien, inklusive Call to Adventure: Epic Origins®, Call to Adventure: The Stormlight Archive® och Call to Adventure: The Name of the Wind®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Reglerna fungerar som ett lock ovanpå brickorna. Brickorna är arrangerade i upp till tre lager enligt bilden. Alla brickor har ett fullfärgstryck, in- och utvändigt. Det finns utrymme för alla kort att sleetas med kvalitetshylsor. Varje kortlek har sin egen bricka. Insatsen innehåller en påfyllningsbricka, som läggs till mitten av bottenskiktet. Kort- och resursfacken kan användas under spelet för att göra inställningarna lätta. När du packar lådan, placera först spelarmattorna ovanpå brickorna följt av regelboken, för att försegla innehållet i brickorna. Kampanjkuverten kan läggas ovanpå tills vidare, och när de öppnas kan komponenterna sorteras i deras lämpliga fack. Detta fyller lådan helt utan locklyft och möjliggör vertikal förvaring av spelet. FS-CTA är en officiellt licensierad insatsprodukt tillverkad i samarbete med Brotherwise Games®. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 5 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for game with external box dimensions of 23.5 x 30.1.5 x 8 cm. Official full colour insert compatible with Call to Adventure®. It is separately compatible with each game in the Call to Adventure® series, including Call to Adventure: Epic Origins®, Call to Adventure: The Stormlight Archive®, and Call to Adventure: The Name of the Wind®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules act as a lid on top of the trays. The trays are arranged in up to three layers as shown. All the trays feature a full colour print, inside and out. There is space for all cards to be sleeved with quality sleeves. Each deck of cards has its own tray. The insert includes one filler tray, which is added to the middle of the bottom layer. The card and resource trays can be used during game play to make set up easy. When packing the box, first place the player mats on top of the trays followed by the rulebook, in order to seal in the contents of the trays. The campaign envelopes can be placed on top for now, and as they are opened the components can be sorted into their appropriate trays. This fully fills the box without any lid lift and allows for vertical storage of the game. FS-CTA is an officially licensed insert product made in partnership with Brotherwise Games®. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD. This product consists of a flat-pack of 5 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 363.00
1

Imperial Settlers & 51st State Insert

Imperial Settlers & 51st State Insert

Denna Campaign 3-inlägg är designad för att vara kompatibel med Imperial Settlers® och aztekerna, Atlanteans, Amazons, Why Can't we be Friends®, 3 är ett magiskt nummer®, We didn't Start the Fire®-expansionerna. Designen ger både effektiv lagring och förbättrat spel. Tokenbrickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Brickorna är ordnade med kortbrickor på sidan och tre lager tokenbrickor i mitten. Dessa är token- och kakelbrickorna. Det finns två fack för förvaring av Atlantiska och Aztekiska tokens. Det finns en lång bricka för varumarkörerna och en annan för förvaring av guld, raze, försvar och andra polletter. Det finns plats för 810 sleeved kort totalt och FFG sleeves har använts vid testning. Dessa brickor har inga baser och är avsedda att förbli i spellådan och inte tas bort. Dessa spelbrädor måste placeras i lådan i följande ordning. Lägg först sex fraktionsbrädor i en fördjupning överst på var och en av de stora kortfacken. Gå sedan poängtavlan och en sjunde fraktionstavla om du har det. Regelböckerna går sist, med den viktigaste överst. Obs - locket kommer att åka högt med 4 mm när det stängs. Detta för att tillåta att korten i hylsan kan lagras vertikalt och brädorna kan förvaras ovanpå. Denna produkt består av ett platt paket med 4 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- This Campaign 3 insert is designed to be compatible with Imperial Settlers® and the Aztecs, Atlanteans, Amazons, Why Can't we be Friends®, 3 is a Magic Number®, We didn't Start the Fire® expansions. The design provides both efficient storage and improved game play. The token trays can be utilised during the game, and they greatly aid set-up and clear-away times. The trays are arranged with card trays down the side and three layers of token trays in the middle. These are the token and tile trays. There are two trays for storing the Atlantean and Aztec tokens. There is one long tray for the goods markers, and another for storing the gold, raze, defense and other tokens. There is space for 810 sleeved cards in total and FFG sleeves have been used in testing. These trays have no bases and are meant to remain inside the game box and not be removed. This game boards need to be placed in the box in the following sequence. First go six faction boards in a recess at the top of each of the large card trays. Then go the score board and a seventh faction board if you have it. The rule books go last, with the main one on top. Note - the lid will ride high by 4 mm when closed. This is to allow the sleeved cards to be stored vertically, and the boards to be stored on top. This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 232.00
1

Kingdom Death: Monster - Gambler's Chest Insert

Kingdom Death: Monster - Gambler's Chest Insert

Insats kompatibel med Kingdom Death: Monster - Gambler's Chest®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Reglerna och brädorna fungerar som ett lock ovanpå brickorna. Insatsen är designad för kort med hylsor och har plats för 425 stora, 900 standard- och 450 fyrkantiga redskapskort. Brickan för redskapskorten kan även användas för standardkort om dina redskapskort lagras på annat håll, t.ex. i en mapp. På så sätt kan du lagra ytterligare 250 standardkort med hylsor. Obs: Insats designad för spel med ytterlådans mått på 63,4 x 33,3 x 9,0 cm.  FS-KDMGC är ett inofficiellt speltillbehör från tredje part. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD.  Denna produkt består av ett platt paket med 9 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i förpackningen. Bruttovikt: 1 000 g Förpackningsmått: 25,5 x 35,5 x 5,0 cmMaterial: Evacore-ark --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert compatible with Kingdom Death: Monster - Gambler's Chest®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. The insert is designed for sleeved cards, and has space for 425 large, 900 standard, and 450 square gear cards. The tray for the gear cards can also be used for standard cards if your gear cards are stored in elsewhere, say in a folder. In this way you can store an additional 250 sleeved standard cards. Note: Insert designed for game with external box dimensions of 63.4 x 33.3 x 9.0 cm.  FS-KDMGC is a third party, unofficial game accessory. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD.  This product consists of a flat-pack of 9 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.Gross weight: 1,000 grPackaging dimensions: 25.5 x 35.5 x 5.0 cmMaterial: Evacore sheets

SEK 532.00
1

Root Insert

Root Insert

Insats kompatibel med Root® och The Riverfolk®, The Underworld®, The Exiles & Partisans Deck®, The Vagabond Pack® och Resin Clearing Markers®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Insatsen är anordnad i tre lager. Observera att denna inlaga är designad, tillsammans med regelböckerna, för att fylla basspellådan. Brädorna och spelarbrädorna måste förvaras separat i en av expansionslådorna. Varje fraktion får sin egen bricka, med platser för att dela och organisera sina bitar. Det finns en dedikerad bricka för de större hartsrensningsmarkörerna. Det stora kortfacket har ingen bas och måste ligga kvar i spellådan. Brickan är dimensionerad för att passa kort med hylsor. De fyra kortplatserna låter dig lagra separat de två delade kortlekarna, fraktionsöversiktskorten och vagabondleken. Som nämnts ovan kan många av brickorna användas under spelet för att organisera komponenterna och göra åtkomsten lätt för alla spelare. När du packar lådan, placera alla insättningsbrickor i lådan enligt instruktionerna. Lägg sedan till regelböckerna från spelet och expansionerna. Detta fyller hela lådan och möjliggör vertikal lagring av spelet. spelplanen och olika spelplaner måste förvaras i en av de två stora expansionslådorna. Den fullständiga samlingen av brädor från spelet och angivna expansioner kommer att fylla en av expansionsrutorna. Denna produkt består av ett platt paket med 4 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert compatible with Root®, and The Riverfolk®, The Underworld®, The Exiles & Partisans Deck®, The Vagabond Pack® and Resin Clearing Markers®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The insert is arranged in three layers. Note that this insert is designed, together with the rule books, to fill the base game box. The boards and player boards need to be stored separately in one of the expansion boxes. Each faction receives it's own tray, with slots to divide and organise it's pieces. There is a dedicated tray for the larger resin clearing markers. The large card tray has no base and needs to remain in the game box. The tray is sized to fit sleeved cards. The four slots allow you to store separately the two shared decks, the faction overview cards and the vagabond deck. As mentioned above many of the trays can be used during the game to organise the components and make access by all players easy. When packing the box place all of the insert trays in the box as shown in the instructions. Then add the rule books from the game and expansions. This fully fills the box and allows for vertical storage of the game. the game boards and various player boards need to be stored in one of the two large expansion boxes. The full collection of boards from the game and expansions listed will fill one of the expansion boxes. This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 235.00
1

The Voyages of Marco Polo Insert V2

The Voyages of Marco Polo Insert V2

Obs: Insats designad för spel med ytterlådans mått på 31,8 x 22,9 x 7,1 cm. Observera också att detta är den reviderade versionen av vår ursprungliga FS-MPO-insats. Insats kompatibel med The Voyages of Marco Polo® inklusive The New Characters®-miniexpansionen och The Agents of Venice®-expansionen. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Insatsen är separat kompatibel med Marco Polo II: In the Service of the Khan. Obs: När det är fullt laddat med originalspelet och båda expansionerna stängs locket inte helt i linje med lådan. Det återstår ett mellanrum på 3-4 mm på grund av den extra brädan till The Agents of Venice® expansion. Infoga funktioner: Fem brickor för spelarpjäser En bricka för medföljande brickor Två små kortfack Två resurs- och myntfack Två fack för karaktärer och andra komponenter Två öppna brickor för kontraktsplattor Som nämnts ovan är denna insats också helt kompatibel med den nya versionen av spelet Marco Polo II: In the Service of the Khan®. I det här fallet fyller spelet lådan och locket stängs i linje med lådan. Denna produkt består av ett platt paket med 4 Evacore-lakan. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for game with external box dimensions of 31.8 x 22.9 x 7.1 cm. Note also that this is the revised version of our original FS-MPO insert. Insert compatible with The Voyages of Marco Polo® including the The New Characters® mini expansion and The Agents of Venice® expansion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. Insert is separately compatible with Marco Polo II: In the Service of the Khan. Note: When fully loaded with the original game and both expansions the box lid does not fully close flush with the box. There remains a 3-4 mm gap due to the additional board of The Agents of Venice® expansion. Insert features: Five trays for player pieces One tray for the companion tiles Two small card trays Two resource and coin trays Two trays for characters and other components Two open sided trays for contract tiles As mentioned above this insert is also fully compatible with the new version of the game Marco Polo II: In the Service of the Khan®. In this case the game fills the box and the lid closes flush with the box. This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 235.00
1

Hallertau Insert

Hallertau Insert

Insats kompatibel med Hallertau. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Insatsen är anordnad i upp till fyra lager. Det finns utrymme för alla kort att sleetas. Var och en av de fyra kortlekarna som används under ett spel har sina egna brickor som kan placeras direkt på spelplanen. Sedan lagras de tre gateway- och gårdsdäcken som inte används för närvarande i de större vertikala kortfacken. När du packar lådan placerar du först bygdegårds-, översikts- och juvellådans brickor ovanpå påfyllningsbrickan på höger sida. Lägg sedan de fyra stallbrädorna ovanpå i urtaget som är avsett för dem. Lägg sedan de återstående större brädorna ovanpå brickorna och lägg till sist till regelboken enligt bilden. När den är fulladdad fylls lådan till toppen, vilket möjliggör vertikal förvaring. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert compatible with Hallertau. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The insert is arranged in up to four layers. There is space for all cards to be sleeved. Each of the four card decks used during a game have their own trays which can be placed directly onto the board. Then the three gateway and farmyard decks not currently in use are stored in the larger vertical card trays. When packing the box first place the community center, overview and jewel box tiles on top of the filler tray on the right-hand side. Next place the four stable boards on top in the recess provided for them. Then place the remaining larger boards on top of the trays, and lastly add the rule book as shown. Once fully loaded the box is filled to the top, allowing for vertical storage.

SEK 317.00
1

HUANG Insert

HUANG Insert

Officiell fullfärgsinsats kompatibel med HUANG®. Designen ger både effektiv förvaring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Reglerna och brädorna fungerar som ett lock ovanpå brickorna. Fullfärgstrycket ger verkligen liv till brickorna, knyter ihop dem med temat för spelet och gör det lättare att se vilka komponenter som hamnar vart.Obs: Insats designad för spel med yttermått på 30,0 x 30,0 x 5,3 cm.FS-HUANG är en officiellt licensierad insatsprodukt tillverkad i samarbete med Phalanx Games®. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är förknippade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 3 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Official full colour insert compatible with HUANG®.The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays.The full colour print really brings the trays to life, tying them in with the theme of the game and making it easier to see which components go where.Note: Insert designed for game with external box dimensions of 30.0 x 30.0 x 5.3 cm.FS-HUANG is an officially licensed insert product made in partnership with Phalanx Games®. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD.This product consists of a flat-pack of 3 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 292.00
1

Living Kortspels Insert

Living Kortspels Insert

Obs: Insats avsedd för spel med ytterlådans mått på 25,4 x 29,2 x 7,6 cm. Insats kompatibel med de nya rektangulära lådorna för Living Card Games® som Arkham Horror: The Card Game® The Revised Core Set, The Lord of the Rings: The Card Game® The Revised Core Set, såväl som deras expansioner med samma box storlek. Insatsen är dimensionerad för kort med hylsor, och kommer i två varianter med antingen plats för fler spelkomponenter som väskor och urtavlor, eller med extra kortförvaring. Det finns också en bunt med tre tokenbrickor. En bricka, som kan användas på vardera sidan av lådans ände, har ingen mittavdelare för att ge plats för större brickor och kort i ministorlek. Det stora stora kortfacket har två baser i hörnen för att öka styvheten och göra monteringen enklare. De mindre ändtrågen har alla samma storlek bas och kan bytas ut efter behov. När du monterar insatsen måste du bestämma om du behöver mer utrymme för polletter/urtavlor/väskor eller att lägga till utrymme för ytterligare kort. På så sätt har vi gjort insatsen mer flexibel för en mängd olika spellådor. Variant 1 har plats för totalt 800 sleeved-kort, medan Variant 2 har plats för 900 sleeved-kort. När du packar kartongen lägger du bara till regeln och lär dig att spela böcker ovanpå insatsfacken. Detta fyller hela lådan och möjliggör vertikal lagring av spelet. FS-LCG3-insatsen kan även användas i utbyggnader med samma boxstorlek. Se nedan bilder av inlägget i Edge of the Earth Campaign Expansion®-rutan. Eftersom karaktärens minikort och kaospåsen kommer att finnas i huvudspellådan, rekommenderar vi att du här använder den andra monteringsvarianten för att ge mer utrymme för kort. Huvudkortfacket har dopp i ena änden för att ge plats åt ringpärmen på kampanjguideboken. FS-LCG3 är ett inofficiellt speltillbehör från tredje part. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 4 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for games with external box dimensions of 25.4 x 29.2 x 7.6 cm. Insert compatible with the new rectangular boxes for Living Card Games® such as Arkham Horror: The Card Game® The Revised Core Set, The Lord of the Rings: The Card Game® The Revised Core Set, as well as their expansions with the same box size. The insert is sized for sleeved cards, and comes in two variants with either space for more game components such as bags and dials, or with additional card storage. There is also a stack of three token trays. One tray, which can be used be used on either side of the box end, has no middle divider to give space for larger tiles and mini sized cards. The main large card tray has two bases in the corners to add rigidity and to make assembly easier. The smaller end trays all have the same sized base and can be interchanged as needed. When assembling the insert you need to decide whether you need more space for tokens/dials/bags or to add space for additional cards. In this way we have made the insert more flexible for a variety of game boxes. Variant 1 has space for 800 sleeved cards in total, while Variant 2 has space for 900 sleeved cards. When packing the box, simply add the rule and learn to play books on top of the insert trays. This fully fills the box and allows for vertical storage of the game. The FS-LCG3 insert can also be used in expansions with the same box size. See below images of the insert in the Edge of the Earth Campaign Expansion® box. As the character mini cards and chaos bag will be in the main game box, we recommend using here the second assembly variant to provide more space for cards. The main card tray has dips at one end to provide room for the ring binder on the campaign guide book. FS-LCG3 is a third party, unofficial game accessory. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD. This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 239.00
1

CoraQuest Insert

CoraQuest Insert

Obs:  Insats avsedd för spel med ytterlådans mått på  23,0 x 23,0 x 4,8 cm.  Officiell fullfärgsinsats kompatibel med CoraQuest® och separat kompatibel med Keep on Questing®-expansionen. Designen ger både effektiv förvaring och förbättrat spelande, med löstagbara tokenbrickor för användning under spelet. Regelböckerna fungerar som ett lock ovanpå brickorna. Om du har expansionen behöver du två separata insatser, och även användningen av brickorna är något annorlunda. Se nedan för mer info. Kortfacken är dimensionerade för kort med hylsor. De två öppningarna för stående personer är tillräckligt stora för att de ska kunna läggas till med sina ställ monterade. Observera att den stora chefshälsoratten läggs till i kortplatsen för fiendens ståndare. Varje bricka innehåller bilder från regelboken eller spelkort och brädor. Bilderna förbättrar brickornas utseende avsevärt, men hjälper också till i spelet eftersom du omedelbart kan se vad som tar vägen vart. Observera att brickans baser är vändbara, beroende på om du använder brickan för basspelet eller för expansionen. Se nedan. När du packar lådan lägger du helt enkelt till regelböckerna ovanpå brickorna. Detta fyller hela lådan och möjliggör vertikal lagring av spelet. Om du äger både spelet och expansionen (och därför har två separata insatser) kan du använda bricköppningarna lite annorlunda för att bäst lagra korten och komponenterna. Korten arrangeras om med skatt- och startutrustningslekarna i basspellådan och de återstående kortlekarna i expansionslådan som visas. Standees kan också ordnas om med hjältarna i en plats i basspelet, och de stora bossarna i samma plats i expansionslådan. Tre av de fyra insatsfacken kommer med dubbelsidiga baser - du måste välja vilken sida du vill ha med framsidan uppåt beroende på om brickan ska användas för basspelet eller för expansionen. Dessa bilder visar expansionsbaserna uppåt. FS-CORAQ är en officiellt licensierad insatsprodukt tillverkad i samarbete med Bright Eye Games®. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom. Denna produkt består av ett platt paket med 2 Evacore-lakan. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note:  Insert designed for game with external box dimensions of  23.0 x 23.0 x 4.8 cm.  Official full colour insert compatible with CoraQuest®, and separately compatible with the Keep on Questing® expansion. The design provides both efficient storage and improved game play, with removable token trays for use during the game. The rulebooks act as a lid on top of the trays.If you have the expansion you will need two separate inserts, and also the use of the trays is slightly different. Please see below for more info.The card trays are sized for sleeved cards. The two slots for standees are large enough for them to be added with their stands attached. Note that the big boss health dial is added to the slot for the enemy standees.Every tray includes images from the rulebook or game cards and boards. The images greatly improve the look of the trays, but also help in game clear up as you can instantly see what goes where. Note that the tray bases are reversible, depending upon whether you are using the tray for the base game or for the expansion. Please see below.When packing the box, simply add the rulebooks on top of the trays. This fully fills the box and allows for vertical storage of the game. If you own both the game and the expansion (and hence have two separate inserts) you can utilise the tray slots slightly differently to best store the cards and components. The cards are re-arranged with the treasure & starting equipment decks in the base game box, and the remaining decks in the expansion box as shown. The standees can also be rearranged with the heroes in one slot in the base game, and the big bosses in the same slot in the expansion box. Three of the four insert trays come with double sided bases - you need to choose which side you want face up depending upon whether the tray will be used for the base game or for the expansion. These images show the expansion bases face-up. FS-CORAQ is an officially licensed insert product made in partnership with Bright Eye Games®. All trademarks and copyrights remain the property of their respective owners. This product consists of a flat-pack of 2 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 211.00
1

Nucleum Insert

Nucleum Insert

Obs:  Denna produkt är avsedd för en kartongstorlek på 29,7 x 29,7 x 7,1 cm. Officiell fullfärgsinsats kompatibel med Nucleum®, inklusive Nucleum: Australia®-expansionen. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Reglerna och brädorna fungerar som ett lock ovanpå brickorna. Insatsen är anordnad i upp till två lager med plats ovanpå för brädorna. Observera att när den är fulladdad med spelet och expansionen har lådan plats för bara en huvudspelbräde, så att lägga till Australia-brädet kommer att leda till att locket lyfts. Observera att i spelarbrickorna måste spelarens stadsbyggnadsbrickor staplas i ett hörn. De två experimentbrickorna har plats för de åtta teknikbrickorna per experiment. Du kan alternativt hålla dessa brickor inuti experimentbrädorna, men vi upptäckte att de tenderar att falla ut under lagring. Varje bricka innehåller bilder från regelboken eller spelkort och brädor. Det finns en ovanlig bricka för spelkorten och actionbrickorna. Denna bricka har ingen bas på baksidan där korten hamnar för att ge plats åt kort med hylsor.  Bilderna förbättrar brickornas utseende avsevärt, men hjälper också till i spelet eftersom du omedelbart kan se vad som går vart. När du packar lådan, placera först huvudkortet ovanpå den nedre nivån av brickor. Detta följs av sidotavlan och regelböcker. Lägg sedan spelartavlan ovanpå allt och lägg till sist till experimentbrädorna och de allmänna spelarhjälpmedel som visas. Detta fyller lådan helt utan locklyft (förutsatt en enda huvudspelbräda) och möjliggör vertikal förvaring av spelet. FS-NCLM är en officiellt licensierad skärprodukt tillverkad i samarbete med Board & Dice®. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 4 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note:  This product is intended for a box size of 29.7 x 29.7 x 7.1 cm. Official full colour insert compatible with Nucleum®, including the Nucleum: Australia® expansion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. The insert is arranged in up to two layers with space on top for the boards. Note that when fully loaded with the game and expansion the box has room for just one main game board, so adding the Australia board will cause lid lift. Note that in the player trays the player's urban building tiles need to be stacked in one corner. The two experiment tile trays have room for the eight technology tiles per experiment. You can alternatively keep these tiles inside the experiment boards, however we found that they tend to fall out during storage. Every tray includes images from the rulebook or game cards and boards. There is one unusual tray for the game cards and action tiles. This tray has no base on the back where the cards go in order to provide room for sleeved cards.  The images greatly improve the look of the trays, but also help in game clear up as you can instantly see what goes where. When packing the box, first place the main board on top of the lower level of trays. This is followed by the side board and rule books. Next place the player board on top of everything, and lastly add the experiment boards and general player aids as shown. This fully fills the box without any lid lift (assuming a single main game board) and allows for vertical storage of the game. FS-NCLM is an officially licensed insert product made in partnership with Board & Dice®. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD. This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 279.00
1

Fantastic Factories Insert

Fantastic Factories Insert

Officiellt licensierad insats kompatibel med Fantastic Factories, inklusive utrymme för Manufactions och Subterfuge-expansionerna.Obs:  Insats designad för spel med yttermått på 20,0 x 27,3 x 7,1 cm. Officiell fullfärgsinsats som är kompatibel med Fantastic Factory, inklusive expansionerna Manufactions och Subterfuge. Designen ger både effektiv förvaring och förbättrat spelande, med löstagbara tokenbrickor för användning under spelet. Regelböckerna fungerar som ett lock ovanpå brickorna. Brickorna är arrangerade i upp till två lager, med en stor kortfack utan bas i ena änden. Notera stapeln med företagsfraktionstavlor i det nedre vänstra hörnet. Tärningsfacket har speciella väggar för att hålla dessa brädor på plats. Kortfacket är anpassat för kort med hylsor. Den allmänna tokenbrickan har också plats för träfabriken från den första upplagan av spelet. Varje bricka innehåller bilder från regelboken eller spelkort och brädor. Bilderna förbättrar brickornas utseende avsevärt, men hjälper också till i spelet. du kan direkt se vad som går vart. När du packar lådan, placera först huvudkontorstavlorna ovanpå tokenbrickorna tillsammans med regelboken för Subterfuge expansion. Lägg till sist de återstående regelböckerna ovanpå allt. Detta fyller hela lådan och möjliggör vertikal lagring av spelet.FS-FANFAC är en officiellt licensierad insatsprodukt tillverkad i samarbete med Deep Water Games. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom. Denna produkt består av ett platt paket med 2 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Officially licensed insert compatible with Fantastic Factories, including space for the Manufactions and Subterfuge expansions.Note:  Insert designed for game with external box dimensions of  20.0 x 27.3 x 7.1 cm.folded space insert organizer fantastic factories Official full colour insert compatible with Fantastic Factories, including the Manufactions and Subterfuge expansions. The design provides both efficient storage and improved game play, with removable token trays for use during the game. The rulebooks act as a lid on top of the trays.The trays are arranged in up to two layers, with a large card tray with no base at one end. Note the stack of corporate faction boards in the lower left corner. The dice tray has special walls to hold these boards in place. The card tray is sized for sleeved cards. The general token tray also has space for the wooden factory from the first edition of the game.Every tray includes images from the rulebook or game cards and boards.The images greatly improve the look of the trays, but also help in game clear up as you can instantly see what goes where. When packing the box, first place the headquarters boards on top of the token trays together with the Subterfuge expansion rulebook. Lastly place the remaining rulebooks on top of everything. This fully fills the box and allows for vertical storage of the game.FS-FANFAC is an officially licensed insert product made in partnership with Deep Water Games. All trademarks and copyrights remain the property of their respective owners.This product consists of a flat-pack of 2 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 211.00
1

Autobahn Insert

Autobahn Insert

Obs:  Insats designad för antingen Kickstarter-utgåvan med externa kartongmått på 22,8 x 32,0 x 6,3 cm, eller för detaljhandelsutgåvan med externa kartongmått på 22,4 x 31,6 x 6,1 cm. Observera att när det används i återförsäljarutgåvan finns det en mycket liten mängd locklyft på 3 mm.vikt utrymme infoga organisatör autobahn färginlägg gränd kattspel Officiell fullfärgsinsats kompatibel med Autobahn®. Designen ger både effektiv förvaring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Reglarna och brädorna fungerar som ett lock ovanpå brickorna. Brickorna är arrangerade i upp till två lager. Observera att de mindre brädorna staplas vertikalt i ena änden av lådan.  Bilagan fungerar lika bra med antingen Kickstarter- eller återförsäljarutgåvorna av spelet. Varje spelare får sin egen spelarbricka för sina tokens och diskar, såväl som sina grundläggande actionkort. Det finns utrymme för alla kort att sleeves. Varje bricka innehåller bilder från regelboken eller spelkort och brädor. Varje spelarbricka har en scen från spelplanen i spelarens färg. Bilderna förbättrar brickornas utseende avsevärt, men hjälper också till att klara upp spelet eftersom du direkt kan se vad som går vart. När du packar lådan, placera först den mindre brädor vertikalt i ena änden av lådan. Placera sedan huvudspelbrädet följt av de återstående större brädena. Lägg sist till regelboken. Detta fyller lådan helt utan locklyft och möjliggör vertikal förvaring av spelet.FS-AUTOB är en officiellt licensierad insatsprodukt tillverkad i samarbete med Alley Cat Games®. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är förknippade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 4 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note:  Insert designed for either the Kickstarter edition with external box dimensions of 22.8 x 32.0 x 6.3 cm, or for the retail edition with external box dimensions of 22.4 x 31.6 x 6.1 cm. Note that when used in the retail edition there is a very small amount of lid lift of 3mm.folded space insert organizer autobahn colour insert alley cat games Official full colour insert compatible with Autobahn®.The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays.The trays are arranged in up to two layers. Note that the smaller boards are stacked vertically at one end of the box.  The insert works equally well with either the Kickstarter or retail editions of the game.Each player receives their own player tray for their tokens and counters, as well as their basic action cards. There is space for all cards to be sleeved.Every tray includes images from the rulebook or game cards and boards. Each player tray has a scene from the game board in the player colour.The images greatly improve the look of the trays, but also help in game clear up as you can instantly see what goes where.When packing the box, first place the smaller boards vertically at one end of the box. Next place the main game board followed by the remaining larger boards. Lastly add the rule book. This fully fills the box without any lid lift and allows for vertical storage of the game.FS-AUTOB is an officially licensed insert product made in partnership with Alley Cat Games®. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD.This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 279.00
1

Dominant Species Insert

Dominant Species Insert

Obs: Insats designad för spel med ytterlådans mått på 22,9 x 31,0 x 7,9 cm. Insats kompatibel med Dominant Species®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Brickorna är arrangerade i upp till två lager enligt bilden nedan. Observera att terränghexagonerna är ordnade i två högar på vardera sidan av kortfacket. FS-DOMSP-insatsen fungerar lika bra med Dominant Species: Marine. Insatsen innehåller en bricka för var och en av spelarpjäsens färger, som separerar bitarna efter typ. Kortfacket har tillräckligt med utrymme för sleeved cards. Det finns också en påfyllningsbricka för att hålla de andra brickorna på plats och göra plats för påsen med elementpolletter. När du packar lådan, placera först spelplanen ovanpå brickorna. Detta följs av regelboken och två högar av djuruppvisningarna. Detta fyller hela lådan och möjliggör vertikal lagring av spelet. FS-DOMSP är ett inofficiellt speltillbehör från tredje part. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är förknippade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 3 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for game with external box dimensions of 22.9 x 31.0 x 7.9 cm. Insert compatible with Dominant Species®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The trays are arranged in up to two layers as shown below. Note that the terrain hexagons are arranged in two stacks on either side of the card tray. The FS-DOMSP insert works equally well with Dominant Species: Marine. The insert includes a tray for each of the player piece colours, separating the pieces by type. The card tray has sufficient space for sleeved cards. There is also one filler tray to keep the other trays in place and make space for the bag of element tokens. When packing the box, first place the game board on top of the trays. This is followed by the rule book and two stacks of the animal displays. This fully fills the box and allows for vertical storage of the game. FS-DOMSP is a third party, unofficial game accessory. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD.This product consists of a flat-pack of 3 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 239.00
1

Lost Ruins of Arnak Insert

Lost Ruins of Arnak Insert

Insats kompatibel med Lost Ruins of Arnak®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Brickorna är arrangerade i upp till tre lager, med spelarbrädorna och poängtavlan som visas. Insatsen innehåller fack för att lagra och organisera alla spelkomponenter. Det finns utrymme för alla kort att sleetas med kvalitetshylsor. Brickorna inkluderar en stor tvärbricka som fyller en del av lådan och håller brickorna runt den på plats. Denna bricka kan komma att ersättas med en FS-LRA+-insats i framtiden om det finns en expansion för spelet. Många av brickorna kan användas under spel och installation. De små resursbrickorna kan tas ur lådan och placeras direkt på matningskortet. Andra brickor kan ordnas runt brädan efter behov. Det är enkelt att packa lådan: placera först spelarbrädorna, poängtavlan och de stora markörerna ovanpå korsbrickan. Placera sedan matningskortet på vänster sida i det avsedda urtaget. Lägg till sist huvudspelbrädet och regelboken ovanpå. Detta fyller hela lådan och möjliggör vertikal lagring av spelet. Denna produkt består av ett platt paket med 5 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert compatible with Lost Ruins of Arnak®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The trays are arranged in up to three layers, with the player boards and score pad arranged as shown. The insert includes trays for storing and organising all of the game components. There is space for all cards to be sleeved with quality sleeves. The trays include one large cross-piece tray which fills one part of the box, holding the trays around it in place. This tray might be replaced with an FS-LRA+ insert in the future if there is an expansion released for the game. Many of the trays can be used during game play and setup. The small resource trays can be taken from the box and placed directly onto the supply board. Other trays can be arranged aorund the board as needed. Packing the box is simple: first place the player boards, scorepad and large markers on top of the cross-piece tray. Next place the supply board on the left hand side in the recess provided. Lastly place the main game board and rule book on top. This fully fills the box and allows for vertical storage of the game. This product consists of a flat-pack of 5 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 317.00
1

Earth Insert

Earth Insert

Obs:  Denna produkt är avsedd för en kartongstorlek på 29,7 x 29,7 x 7,1 cm. vikt utrymme infoga organisatör jordfärg infoga insideup spel Officiell fullfärgsinsats kompatibel med Earth®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Reglerna och brädorna fungerar som ett lock ovanpå brickorna. Fullfärgstrycket ger verkligen liv åt brickorna, knyter ihop dem med spelets tema och gör det lättare att se vilka komponenter som hamnar vart. Det finns två par resursbrickor, vilket gör att du kan placera dem i båda ändarna av bordet för enkel åtkomst för alla spelare. Varje spelare får sin egen spelarbricka för sina polletter och diskar. Det finns utrymme för alla kort att sleeves. Varje bricka innehåller bilder från regelboken eller spelkort och brädor.  Bilderna förbättrar brickornas utseende avsevärt, men hjälper också till i spelet eftersom du omedelbart kan se vad som går vart. När du packar lådan, placera först spelbrädet ovanpå brickorna i det avsedda urtaget. Lägg till sist till regelboken för att täcka allt. Detta fyller lådan helt utan locklyft och möjliggör vertikal förvaring av spelet. Denna produkt består av en platt förpackning med 6 Evacore-lakan. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. FS-EARTH är en officiellt licensierad insatsprodukt tillverkad i samarbete med InsideUp Games®. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note:  This product is intended for a box size of 29.7 x 29.7 x 7.1 cm. folded space insert organizer earth colour insert insideup games Official full colour insert compatible with Earth®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. The full colour print really brings the trays to life, tying them in with the theme of the game and making it easier to see which components go where. There are two pairs of resource trays, allowing you to place them at both ends of the table for easy access by all players.Each player receives their own player tray for their tokens and counters. There is space for all cards to be sleeved.Every tray includes images from the rulebook or game cards and boards.  The images greatly improve the look of the trays, but also help in game clear up as you can instantly see what goes where. When packing the box, first place the game board on top of the trays in the recess provided. Lastly add the rule book to cover everything. This fully fills the box without any lid lift and allows for vertical storage of the game.This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package. FS-EARTH is an officially licensed insert product made in partnership with InsideUp Games®. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD.

SEK 363.00
1

Robinson Crusoe Insert

Robinson Crusoe Insert

Denna Campaign 3-insats är designad för att vara kompatibel med Robinson Crusoe® och Voyage of the Beagle Vol. 1 ® expansion. Designen ger både effektiv lagring och förbättrat spel. Brickorna kan användas under spelet, och de underlättar i hög grad uppställnings- och röjningstider. Reglerna och brädorna fungerar som ett lock ovanpå brickorna. Insatsen är anordnad i två lager enligt bilden. Observera att ö-hexagonbrickorna och första spelare-token lagras mellan de andra brickorna. Det finns fyra fack för förvaring av stora kort vertikalt längs sidorna av lådan. . Det finns ytterligare två kortfack för de återstående stora korten och två separata fack för de små korten. Det finns tre fack från insatsens hörn för förvaring av de sårade polletterna, de små Voyage of the Beagle-polletterna och de extra polletterna från spelet. Det finns två stora brickor, en för de stora Voyage of the Beagle-brickorna och en för upptäckts- och äventyrspoletter. Dessa spelbrädor måste placeras i lådan i följande sekvens. Gå först till brädorna och regelboken från Voyage of the Beagle-expansionen. Sedan går huvudspelbrädet, följt av de tre första karaktärsbladen. Det sista teckenbladet och scenariebladen kommer härnäst, med regelboken ovanpå allt för att fylla rutan. Insatsdesignen fungerar lika bra med Pegasus Spiele-utgåvan av spelet som är i en liknande låda med storleken 29,4 x 29,4 x 7,2 cm. Denna produkt består av ett platt paket med 4 Evacore-lakan. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- This Campaign 3 insert is designed to be compatible with Robinson Crusoe® and the Voyage of the Beagle Vol. 1 ® expansion. The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. The insert is arranged in two layers as shown. Note that the island hexagon tiles and first player token are stored in between the other trays. There are four trays for storing large cards vertically down the sides of the box. . There are two more card trays for the remaining large cards ,and two separate trays for the small cards.There are three trays form the corner of the insert for storing the wound tokens, the small Voyage of the Beagle tokens, and the additional tokens from the game. There are two large trays, one for the large Voyage of the Beagle tiles and one for the discovery and adventure tokens.This game boards need to be placed in the box in the following sequence. First go the boards and rule book from the Voyage of the Beagle expansion. Then goes the main game board, followed by the first three character sheets. The last character sheet and the scenario sheets go next, with the rulebook going on top of everything to fill the box. The insert design works equally well with the Pegasus Spiele edition of the game which is in a similar box sized 29.4 x 29.4 x 7.2 cm. This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 235.00
1