Pricemate

2517-42 Metric Taper Bore Bush

Taper Bushes are a convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper Bushes are pre-machined with the required bore & keyway size and are supplied complete with locking set screws. Taper Bushes are designed for use with V-Pulleys, Chain Sprockets, Micro V-Pulleys, Timing Belt Pulleys, Couplings, and Weld-On & Bolt-On Hubs. Part numbers are identified by a 4 digit number (e.g. 1610) which represents the taper bush series followed by the bore size (e.g. 28mm) for example 1610x28mm.

GBP 0.00

1

2517-1.1/4 Imperial Taper Bore Bush

Used to fit flywheels, pulleys and chain sprockets onto a shaft. Taper Bore Bushes are easily assembled and are an ideal method of mating to a shaft without the need for machining. To lock the shaft tighten up two grub screws, to unlock it you remove the screws, inserting one in the third hole and wind in to lever off the hub from the shaft. Material: EN-GJL 200/DIN EN 1561. Inch Sizes Keyways to BS 46 Part 1. * Bores marked have shallow keyways. We supply taper bushes up to sizes 8065 with bore sizes up to 200mm/8. Pilot bore taper bushes are also available. For further information please contact your local branch.

GBP 0.00

1

1615-25 Metric Taper Bush

Taper Bushes are a convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper Bushes are pre-machined with the required bore & keyway size and are supplied complete with locking set screws. Taper Bushes are designed for use with V-Pulleys, Chain Sprockets, Micro V-Pulleys, Timing Belt Pulleys, Couplings, and Weld-On & Bolt-On Hubs. Part numbers are identified by a 4 digit number (e.g. 1610) which represents the taper bush series followed by the bore size (e.g. 28mm) for example 1610x28mm.

GBP 0.00

1

1210-18 Metric Taper Bore Bush

Taper Bushes are a convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper Bushes are pre-machined with the required bore & keyway size and are supplied complete with locking set screws. Taper Bushes are designed for use with V-Pulleys, Chain Sprockets, Micro V-Pulleys, Timing Belt Pulleys, Couplings, and Weld-On & Bolt-On Hubs. Part numbers are identified by a 4 digit number (e.g. 1610) which represents the taper bush series followed by the bore size (e.g. 28mm) for example 1610x28mm.

GBP 0.00

1

1008-3/4 Imperial Taper Bush

Taper Bushes are a convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper Bushes are pre-machined with the required bore & keyway size and are supplied complete with locking set screws. Taper Bushes are designed for use with V-Pulleys, Chain Sprockets, Micro V-Pulleys, Timing Belt Pulleys, Couplings, and Weld-On & Bolt-On Hubs. Part numbers are identified by a 4 digit number (e.g. 1610) which represents the taper bush series followed by the bore size (e.g. 1/2mm) for example 1610/1/2

GBP 0.00

1

1210-14 Metric Taper Bore Bush

Taper Bushes are a convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper Bushes are pre-machined with the required bore & keyway size and are supplied complete with locking set screws. Taper Bushes are designed for use with V-Pulleys, Chain Sprockets, Micro V-Pulleys, Timing Belt Pulleys, Couplings, and Weld-On & Bolt-On Hubs. Part numbers are identified by a 4 digit number (e.g. 1610) which represents the taper bush series followed by the bore size (e.g. 28mm) for example 1610x28mm.

GBP 0.00

1

Dunlop BTL 1008-18 Metric Taper Bore Bush

Taper Bushes are a convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper Bushes are pre-machined with the required bore & keyway size and are supplied complete with locking set screws.Taper Bushes are designed for use with V-Pulleys, Chain Sprockets, Micro V-Pulleys, Timing Belt Pulleys, Couplings, and Weld-On & Bolt-On Hubs. Part numbers are identified by a 4 digit number (e.g. 1610) which represents the taper bush series followed by the bore size (e.g. 28mm) for example 1610x28mm.

GBP 4.19

1

POLCO TLD Chrylser Ypsilon 2011 on 2517 - CR17

TLD Chrylser Ypsilon 2011 on 2517 - CR17

GBP 0.00

1

POLCO Rub TLD Chrylser Ypsilon 2011 on 2517 - CR17RM

Rub TLD Chrylser Ypsilon 2011 on 2517 - CR17RM

GBP 0.00

1

POLCO Premium TLD Chrylser Ypsilon 2011 on 2517 - CR17PR

Premium TLD Chrylser Ypsilon 2011 on 2517 - CR17PR

GBP 0.00

1

1615-30 Metric Taper Bore Bush

Used to fit flywheels, pulleys and chain sprockets onto a shaft. Taper Bore Bushes are easily assembled and are an ideal method of mating to a shaft without the need for machining. To lock the shaft tighten up two grub screws, to unlock it you remove the screws, inserting one in the third hole and wind in to lever off the hub from the shaft. Material: EN-GJL 200/DIN EN 1561. Metric Sizes Keyways to DIN 6885 Part 1. * Bores marked have shallow keyways. We supply taper bushes up to sizes 8065 with bore sizes up to 200mm/8. Pilot bore taper bushes are also available. For further information please contact your local branch.

GBP 0.00

1

7300825M Omega Taper Lock Hub 40-M 2517

Omega Taper Bore Hubs Rexnord Omega Utilising a specially formulated polyurethane material engineered for maximum durability, strength and fatigue resistance. The flex element is designed to split in half, allowing simplified assembly and disassembly. Interchangeable hubs allow for reduced inventory. High misalignment capacity accommodates unavoidable misalignment with low reactionary forces. Torsionally soft flex element cushions shock loads and vibration extending equipment life. Polyurethane flex element does not require lubrication.

GBP 0.00

1

2012-1.3/4 Imperial Taper Bore Bush

Used to fit flywheels, pulleys and chain sprockets onto a shaft. Taper Bore Bushes are easily assembled and are an ideal method of mating to a shaft without the need for machining. To lock the shaft tighten up two grub screws, to unlock it you remove the screws, inserting one in the third hole and wind in to lever off the hub from the shaft. Material: EN-GJL 200/DIN EN 1561. Inch Sizes Keyways to BS 46 Part 1. * Bores marked have shallow keyways. We supply taper bushes up to sizes 8065 with bore sizes up to 200mm/8. Pilot bore taper bushes are also available. For further information please contact your local branch.

GBP 0.00

1

Optibelt 1008-10 Metric Taper Bore Bush

Used to fit flywheels, pulleys and chain sprockets onto a shaft. Taper Bore Bushes are easily assembled and are an ideal method of mating to a shaft without the need for machining. To lock the shaft tighten up two grub screws, to unlock it you remove the screws, inserting one in the third hole and wind in to lever off the hub from the shaft. Material: EN-GJL 200/DIN EN 1561. Metric Sizes Keyways to DIN 6885 Part 1. * Bores marked have shallow keyways. We supply taper bushes up to sizes 8065 with bore sizes up to 200mm/8. Pilot bore taper bushes are also available. For further information please contact your local branch.

GBP 1.99

1