Pricemate

TensorGrip F10 Plasticiser Resistant Vinyl Spray Adhesive

TensorGrip F10 Plasticiser Resistant Vinyl Spray Adhesive GlueTensorGrip(R) F10 is a revolutionary, high performance plasticiser resistant adhesive, specially formulated to bond all commonly used substrates found within the foam and upholstery industry. The F10 will bond vinyl, plasticised rubbers, leathers and plastics, which in the past this was not possible because of the leeching plasticisers migrating from the vinyls causing delamination.TensorGrip F10 Features:Very High SolidsVery Good Green Strength.High Temp Resistance - 155 deg. C.100% Resistant To Delamination Caused By Plasticiser MigrationF10 Technical Datasheet:Download F10 Datasheet PDFF10 Chemical Technical Data:Solids Content: 55 +/- 2%Specific Gravity: 0.76 to 0.80 gms/ccFailure Temp: 155 deg. COpen time: 15 -20 min maxAppearance: Low odour, reddish in colourFlammability: Flammable adhesive with a flammable propellantDry time 2-4 minsShelf Life: 12 months from date of manufacturePackaging: 17 kg Disposable Canister for industrial use onlyPlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 448.14

1

TensorGrip H96 Non-MECL High Temp Insulation Adhesive Glue - 22 Litre Canister

TensorGrip H96 High Temperature Polystyrene Adhesive 22LTensorGrip H96 is an ultra high temperature resistant adhesive suited to high demand insulation bonding applications. H96 urethane properties give a waterproof and structural bond line. H96 brings you peace of mind when bonding PVC based materials containing plasticiser with it"s 100% resistance to plasticiser migration.Tensorgrip H96 Features:Web spray100% resistant to delamination caused by plasticiser migration.Ultra High Temperature resistance - tested up to 250 deg. C.Structural bond line.100% waterproof bondline.High coverage.Fast consistent web spray application.Coverage 140m2 (22L)What is Tensorgrip H96 Suitable For?InsulationAluminiumH96 Datasheets:Download Technical Datasheet For H96 CanisterH96 Chemical Technical Data:Solids Content: 55 +/- 2%Specific Gravity: 0.76 to 0.80 gms/ccFailure Temp: Up to 250 deg. COpen Time: 15 -20 min maxAppearance: ClearFlammability: Flammable adhesive with a flammable propellantFlash-off Time 2 - 4 minsSHELF LIFE 12 months from date of manufacturePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 289.00

1

TensorGrip H30 Extra Hi-Grab GP Polystyrene Adhesive Glue - 500ml Aerosol

TensorGrip H30 Extra High Grab GP Polystyrene Adhesive 500mlAs part of our HVAC & INSULATION range, H30 is a web spray adhesive suitable for metal sheeting, foam and insulation bonding applications.TensorGrip H30 is a non-chlorinated, high solids, synthetic rubber spray grade multi-purpose adhesive designed to bond quilt, fibrous insulation materials and fabrics to duct work in HVAC markets. H30 is a versatile, high tack spray adhesive with a long open time and excellent strength for bonding a wide variety of substrates including polystyrene & EPS, fabrics, upholstery, foam, plywood, MDF and many others.Tensorgrip H30 500ml Features:HAPs freeHigh tackExcellent room temperature contact bondsExcellent green strength and good heat resistanceWeb sprayColour: Clear / GreenCoverage: 3m2What is Tensorgrip H30 Suitable For?InsulationAluminumPolystyreneH30 Datasheets:Download Technical Datasheet For H30 500mlH30 Chemical Technical Data: Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 95 deg. COpen time: 1 hourColour: Clear or RedFlammability: Flammable adhesive with a flammable propellantDry time 1-3 minsSHELF LIFE: 18 months from date of manufacture

GBP 9.00

1

TensorGrip H50 Hi-Temp Polystyrene Adhesive Glue - 500ml Aerosol

TensorGrip H50 - Hi-Temp Polystyrene AdhesiveAs part of our HVAC & INSULATION range, H50 is suitable for polystyrene and foam insulation materials where a higher temperature is required.TensorGrip(R) H50 is a hi-temp, polystyrene compatible spray adhesive developed to bond insulation materials to themselves and to a variety of substrates, including MDF, chipboard, plywood and many other timber sheet materials. H50 can also be used for bonding to sheet metal substrates where surface preparation is important.Tensorgrip H50 Features:Excellent rubber bonding propertiesHeat resistant up to 106 deg. CFast drying with good open timeExcellent bond adhesion for fabrics, leather, carpet, foam, etc. to metal, hard plastic, plywood, etcWeb SprayWhat is Tensorgrip H50 Suitable For?FRP/GRPPolystyreneH50 Datasheets:Download Technical Datasheet For H50 CanisterH50 Chemical Technical Data:Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 106 deg. COpen time: 1 hourColour: Clear or GreenFlammability: Flammable adhesive with a flammable propellantDry time 1-3 minsSHELF LIFE: 18 months from date of manufacturePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 9.52

1

TensorGrip H50 Hi-Temp Polystyrene Adhesive Glue - 22 Litre Canister

TensorGrip H50 - Hi-Temp Polystyrene AdhesiveAs part of our HVAC & INSULATION range, H50 is suitable for polystyrene and foam insulation materials where a higher temperature is required.TensorGrip(R) H50 is a hi-temp, polystyrene compatible spray adhesive developed to bond insulation materials to themselves and to a variety of substrates, including MDF, chipboard, plywood and many other timber sheet materials. H50 can also be used for bonding to sheet metal substrates where surface preparation is important.Tensorgrip H50 Features:Excellent rubber bonding propertiesHeat resistant up to 106 deg. CFast drying with good open timeExcellent bond adhesion for fabrics, leather, carpet, foam, etc. to metal, hard plastic, plywood, etcWeb SprayWhat is Tensorgrip H50 Suitable For?FRP/GRPPolystyreneH50 Datasheets:Download Technical Datasheet For H50 CanisterH50 Chemical Technical Data:Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 106 deg. COpen time: 1 hourColour: Clear or GreenFlammability: Flammable adhesive with a flammable propellantDry time 1-3 minsSHELF LIFE: 18 months from date of manufacturePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 270.00

1

TensorGrip H50 Hi-Temp Polystyrene Adhesive Glue - 110 Litre Canister

TensorGrip H50 110 Litre Canister - Hi-Temp Polystyrene AdhesiveAs part of our HVAC & INSULATION range, H50 is suitable for polystyrene and foam insulation materials where a higher temperature is required.TensorGrip(R) H50 is a hi-temp, polystyrene compatible spray adhesive developed to bond insulation materials to themselves and to a variety of substrates, including MDF, chipboard, plywood and many other timber sheet materials. H50 can also be used for bonding to sheet metal substrates where surface preparation is important.Tensorgrip H50 Features:Excellent rubber bonding propertiesHeat resistant up to 106 deg. CFast drying with good open timeExcellent bond adhesion for fabrics, leather, carpet, foam, etc. to metal, hard plastic, plywood, etcWeb SprayWhat is Tensorgrip H50 Suitable For?FRP/GRPPolystyreneH50 Datasheets:Download Technical Datasheet For H50 CanisterH50 Chemical Technical Data:Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 106 deg. COpen time: 1 hourColour: Clear or GreenFlammability: Flammable adhesive with a flammable propellantDry time 1-3 minsSHELF LIFE: 18 months from date of manufactureSize: 110 LitrePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 0.00

1

TensorGrip H30 Extra Hi-Grab GP Polystyrene Adhesive Glue - 22 Litre Canister

TensorGrip - H30 - Extra Hi-Grab GP Polystyrene AdhesiveAs part of our HVAC & INSULATION range, H30 is a web spray adhesive suitable for metal sheeting, foam and insulation bonding applications.TensorGrip(R) H30 is a non-chlorinated, high solids, synthetic rubber spray grade multi-purpose adhesive designed to bond quilt, fibrous insulation materials and fabrics to duct work in HVAC markets. H30 is a versatile, high tack spray adhesive with a long open time and excellent strength for bonding a wide variety of substrates including polystyrene & EPS, fabrics, upholstery, foam, plywood, MDF and many others.Tensorgrip H30 Features:HAPs freeHigh tackExcellent room temperature contact bondsExcellent green strength and good heat resistanceWeb sprayWhat is Tensorgrip H30 Suitable For?InsulationAluminumPolystyreneH30 Datasheets:Download Technical Datasheet For H30 CanisterH30 Chemical Technical Data: Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 95 deg. COpen time: 1 hourColour: Clear or RedFlammability: Flammable adhesive with a flammable propellantDry time 1-3 minsSHELF LIFE: 18 months from date of manufacturePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 268.25

1

TensorGrip H31 High Build EPS Spray Adhesive Glue - 22 Litre Canister

TensorGrip H31 High Build EPS Spray Adhesive - 22LAs part of our HVAC & INSULATION range, H31 is a web spray adhesive suitable for polystyrene, metal sheeting and insulation bonding applications.TensorGrip(R) H31 is a premium industrial strength adhesive for a wide range of applications designed specifically for the HVAC and Insulation market. H31 is water resistant and temperature resistant up to 170 deg. F (75 deg. C) and may be used on a variety of substrates: fabrics, upholstery, foam, felt, cardboard, glass, cork, fiberglass and plastics.Tensorgrip H31 Features:Fast drying.Good heat resistance.Very high solids.Non-chlorinated adhesive.Web SprayCoverage - 80m2Application Type - 2 SidedOpen Time Up To 60 MinsFlash Off 1 - 2 minsColour - ClearWhat is Tensorgrip H31 Suitable For?AluminiumInsulationPolystyreneH31 Datasheets:Download Technical Datasheet For H31 CanisterH31 Chemical Technical Data: STORAGE: Not damaged by freezing. Return to room temperature prior to use. For canister product keep cylinders off floor at all times when temperature is below 15 deg. C.FLAMMABILITY: Flammable per ASTM E-681-04.Base: Synthetic Polymer.Solvent: Hydrocarbon.Appearance: Clear.Glue % Solids 45 +/- 3%.Specific Gravity: 0.71 +/- 0.02 gm/cc (5.8 +/- 0.2 lb/gal).SHELF LIFE: 18 months from date of manufacturePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 299.89

1

TensorGrip F40 Hi-Grab Foam & Fabric Spray Adhesive Glue - 500ml Aerosol

TensorGrip F40 Foam & Fabric Adhesive Aerosol SprayAs part of our FOAM & UPHOLSTERY range, F40 is a web spray adhesive suitable carpet tile, thin fabric, thick fabric and foam applications.F40 is a highly aggressive adhesive for all demanding foam, fabric upholstery and carpet applications.F40 is a non-chlorinated high solids synthetic rubber spray grade multipurpose adhesive in canisters. F40 is designed for versatility with a long open time and high tack level with excellent strength for bonding a wide variety of substrates including foam, fabrics, upholstery, plywood, MDF and many others. F40 can also be used as a tackifier for carpet tiles.Excellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet, insulation quilt and slab to most porous and non-porous substrates, e.g. plywood, MDF, chipboard, sheet metal, etc.Tensorgrip F40 Features:HAPs free.Extremely high tack.Excellent room temperature contact bonds.Excellent green strength and good heat resistanceFast drying with long open timeExcellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet insulation quilt and slab to most porous and non-porous substrates, e.g. plywood, MDF, chipboard, sheet metal, etc.Web SprayWhat is Tensorgrip F40 Suitable For?Carpet TileFoamThick FabricThin FabricF40 Datasheets:Download Technical Datasheet For F40 AerosolF40 Chemical Technical Data: Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 95 deg. COpen time: 1 hourColour: ClearFlammability: Flammable adhesive with a flammable propellantDry time 3-5 minsSHELF LIFE 18 months from date of manufactureSize: 500ml AerosolCoverage: 3 m2 (500ml Aerosol)

GBP 8.50

1

TensorGrip F40 Hi-Grab Foam & Fabric Spray Adhesive Glue - 22 Litre Canister

TensorGrip F40 - Hi-Grab Foam & Fabric Spray AdhesiveAs part of our FOAM & UPHOLSTERY range, F40 is a web spray adhesive suitable carpet tile, thin fabric, thick fabric and foam applications.Tensorgrip F40 is a highly aggressive adhesive for all demanding foam, fabric upholstery and carpet applications.Tensorgrip F40 is a non-chlorinated high solids synthetic rubber spray grade multipurpose adhesive in canisters. Tensorgrip F40 is designed for versatility with a long open time and high tack level with excellent strength for bonding a wide variety of substrates including foam, fabrics, upholstery, plywood, MDF and many others. Can also be used as a tackifier for carpet tiles.Excellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet, insulation quilt and slab to most porous and non-porous substrates, e.g. plywood, MDF, chipboard, sheet metal, etc.Tensorgrip F40 Features:HAPs free.Extremely high tack.Excellent room temperature contact bonds.Excellent green strength and good heat resistanceFast drying with long open timeExcellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet insulation quilt and slab to most porous and non-porous substrates, e.g. plywood, MDF, chipboard, sheet metal, etc.Web SprayWhat is Tensorgrip F40 Suitable For?Carpet TileFoamThick FabricThin FabricF40 Datasheets:Download Technical Datasheet For F40 CanisterF40 Chemical Technical Data: Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 95 deg. COpen time: 1 hourColour: Clear or RedFlammability: Flammable adhesive with a flammable propellantDry time 3-5 minsSHELF LIFE 18 months from date of manufacturePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 253.00

1

TensorGrip F40 Hi-Grab Foam & Fabric Spray Adhesive Glue - 110 Litre Canister

TensorGrip F40 - Hi-Grab Foam & Fabric Spray Adhesive - 110L CanisterAs part of our FOAM & UPHOLSTERY range, F40 is a web spray adhesive suitable carpet tile, thin fabric, thick fabric and foam applications.Tensorgrip F40 is a highly aggressive adhesive for all demanding foam, fabric upholstery and carpet applications.Tensorgrip F40 is a non-chlorinated high solids synthetic rubber spray grade multipurpose adhesive in canisters. Tensorgrip F40 is designed for versatility with a long open time and high tack level with excellent strength for bonding a wide variety of substrates including foam, fabrics, upholstery, plywood, MDF and many others. Can also be used as a tackifier for carpet tiles.Excellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet, insulation quilt and slab to most porous and non-porous substrates, e.g. plywood, MDF, chipboard, sheet metal, etc.Tensorgrip F40 Features:HAPs free.Extremely high tack.Excellent room temperature contact bonds.Excellent green strength and good heat resistanceFast drying with long open timeExcellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet insulation quilt and slab to most porous and non-porous substrates, e.g. plywood, MDF, chipboard, sheet metal, etc.Web SprayWhat is Tensorgrip F40 Suitable For?Carpet TileFoamThick FabricThin FabricF40 Datasheets:Download Technical Datasheet For F40 CanisterF40 Chemical Technical Data: Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 95 deg. COpen time: 1 hourColour: Clear or RedFlammability: Flammable adhesive with a flammable propellantDry time 3-5 minsSHELF LIFE 18 months from date of manufacturePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 1112.00

1

Brand

Merchant

Price (EUR)