ISE Kit N°20 Drippers with Dipstick 0-40 l/h

- Adjustable flow rate from 0 to 40 l/h - Mechanism for adjusting the flow rate in steps - Inspectable, to allow easy monitoring of the system - 8 holes for uniform water distribution - Maximum working pressure 3 bar Specifications Kit N°20 drippers with dipstick: - 4 mm coupling mounted on 12 cm rod (Varistake) Click to download: Technical data sheet Kit N°20 drippers with dipstick

Agostini Microtube Roll 1,2 x 3 mm

Length: 100 mt External diameter of the microtube: 3 mm Internal diameter: 1,2 mm Material: polyethylene Color: black The polyethylene microtube with an external diameter of 3 mm, thanks to its small size, is suitable for the realization of capillary irrigation systems in gardens and terraces.

Siplast PVC Microtube, 4 x 6mm, 20m

Microtube roll Length: 20 Mt. Microtube outer diameter: 6 mm. Inner diameter: 4 mm. Material: PVC Color: black The PVC microtube 4 x 6 mm. is suitable to realize capillary irrigation systems in terraces and gardens.

ISE Kit N°20 Plug-In Drippers 0-40 l/h

- Adjustable flow rate from 0 to 40 l/h - Step by step flow rate adjustment mechanism - Inspectable, to allow easy monitoring of the system - 8 holes for uniform water distribution - Maximum working pressure 3 bar Specifications Kit N°20 plug-in drippers: - 4mm push-in coupling (Varis) Click to download:  Technical data sheet Kit N°20 Plug-in drippers

Agostini Elbows for Microtube, diameter 3.5 - 4 mm

Kit N°10, Elbow fitting for capillary tube 3.5 - 4 mm. Click to download: Technical sheet

Agostini Microtube 1,2x3 mm, 1 m - 500 pieces

Pack of 500 pieces of one meter each of black microtube, perfect for the realization of microirrigation systems on terraces and gardens. Technical characteristics 1mt microtube 1,2x3mm pieces N°500 pieces of microtube Length: 1 mt each External diameter of the microtube: 3 mm Internal diameter: 1,2 mm Material: polyethylene Color: black

Irritec Valves with Derivation Kit, diameter 16 mm - 150 pieces

The VDA cylinder valve features a shunt with a grommet/drip-wing. The product is used for all outdoor irrigation systems and has a diameter of 16 mm. The valve is sold in a package of 150 pieces.   Technical characteristics Valve VDA 16: Application: Gardening for Drip Wing Type: cylinder Dimensions: mm 16 Kit 150 PZ For dripline - For mounting make a hole Ø mm. 12 with the appropriate die cutter

GFG Fitting 3/4" Threaded Snap

Connects a hose equipped with a snap-on hose barb to sprinklers with 3/4" female threaded water inlet (20-27 mm dia.). Threaded snap-in fitting GFG Connection: 3/4 "gas (ø 20-27 mm) female Material: plastic Fitting Compatibility GFG connector: hose with snap-on hose barb Connect a hose equipped with a snap-on hose barb to sprinklers with 3/4" female threaded water inlet.

Plast Project "Jolly" Cylinder Valves, diameter 25 mm - 50 pieces

Jolly" valve Diam. 25 super compact cylinder valve of economic type, composed by 2 pieces and 2 gaskets OR. Although small in size, it nevertheless maintains a 9 mm passage hole, which guarantees minimum pressure drops in the points of the system where it is installed.   Applications Kit n°50 "Jolly" cylinder valves diam.25: Great versatility, especially in secondary irrigation lines of short and medium length, or in drip lines. Particularly suitable for irrigation systems with fertigation. Suitable for PE PN4 polyethylene pipe   Materials used Kit n°50 "Jolly" cylinder valves diam.25: Valve entirely made of polypropylene, reinforced with glass fibers, and stabilized against UV. OR gaskets in NBR (nitrile rubber), resistant to petrol, oils, vegetable and animal fats, many solvents, and chemical agents present in fertigation.   Technical features Kit n°50 "Jolly" cylinder valves diam.25: simplified construction composed of only 2 pieces with a snap-on assembly system hydraulic seal by means of 2 OR gaskets of large section (2.62 mm) opening and closing of the valve with particular fluidity possibility of bidirectional installation thanks to the symmetrical opening/closing handle ► Colored handle to make the valve easily identifiable in the installation internal passage on the valve body Ø9 mm ► Infinite range of versions available, to satisfy the most different kind of applications threaded connections according to UNI EN 10226 (ex ISO 7/1) maximum recommended working pressure: 6 bar, at 20°C maximum temperature 80°C   Click to download: Technical data sheet Kit n°50 "Jolly" cylinder valves diam.25 Art. 3985

Irritec Rods - 800 pieces

Number of pieces in the pack: 800 Rods color Irritec screw: black / blue / red Connection: 3 mm Water consumption: about 10-20 liters/hour (depending on the microtube used)

Siplast Polyethylene Pipe, diameter 20mm, 50m

Pipe lenght (mt): 50 mt External diameter of the polyethylene pipe: 20 mm Material: polyethylene Color: black Resistant up to 4 atmospheres Suitable for capillary irrigation systems New production techniques and modern equipment for this pipe Siplast D.20 PN4 MT.50, made with special resins highly resistant to chemicals. The polyethylene pipe Siplast D.20 PN4 MT.50 is also in compliance with all the existing regulations (American, Israeli, European) concerning the stress caused by deformations, couplings, assembly of hose connectors etc.

GF Double Outlet Tap Socket

Flow regulator-modulator for each outlet, allowing the flow to be adjusted separately until it is completely closed Useful forsimultaneous attachment of multiple accessories   Technical characteristics: Snap connection Multifunction Tap socket thread Diam. 3/4" (20 x 27 mm.) Two outlets available

Agostini Chicane Rods - 1000 pieces

Chicane rods Number of pieces per package: 1000 Flow rate of Chicane rods: about 10-20 lt/hour (depending on the microtube on which they are installed) Compatibility: 3 mm diameter capillary micropipe Chicane micropipe holder rods support and direct the micropipe into the pot and are ideal for use in capillary irrigation systems in gardens and terraces.

Polyethylene Pipe Roll

Droplets - Capillary system Low density polyethylene pipe 1st choice PN.4 color Black (external) / Black (internal) Ø 20 mm. Pre-assembled double pitch droplets Microtube ("spaghetto") PE B.D. Black Ø 1,2 x 3, length 100 cm. Standard roll lengths: Ø 25 Pipe 150 m rolls. Available options: - Roll of Mt.150 polyethylene pipe diam.25 with microtube at cm.30 double pitch - No. 1000 drop points - Roll of Mt.150 polyethylene pipe diam.25 with microtube at cm.20 double pitch - Nr. 1500 drop points   Click to download: Data Sheet Roll of polyethylene pipe diam.25 with microtube from Mt. 150

Agostini Cage Rods

Cage shafts Number of pieces per package: 1000 Capacity of the cage shafts: about 10-20 lt/hour (depending on the microtube on which they are installed) Compatibility: 3 mm diameter capillary microtube The cage microtube holders support and direct the microtube inside the pot and are very useful in the realization of capillary irrigation systems on terraces and gardens

Scottish Pebbles 20-40mm

A naturally rounded granite & quartz pebble from the Highlands of Scotland. Available in 20kg polythene bags

Water Butt V3

400 Litre Water Butt details Height: 1240 mm Length: 1000 mm Width: 345 mm Weight: 20 kg Capacity: 400 litres Material: MDPE 500 Litre Water Butt details Height: 1250 mm Length: 1010 mm Width: 460 mm Weight: 37 kg Capacity: 500 litres Material: MDPE 650 Litre Water Butt details Height 1250mm Length 1050mm Width 570mm Weight 35kg Capacity 650 litres Material MDPE Made from virgin polymer Approximate wall thickness: 6-7mm 9" vented lid as standard 1" brass threaded outlet moulded into the tank Integral baffles About the Water Butt V3 This is an extremely tough and durable water tank constructed from MDPE (Medium Density Polyethylene) Ideal for car valeting or window cleaning. You can connect a tap or hose connector to its 1" BSP outlet, you can also use this outlet as a way of connecting serveral tanks together. There is an 8" vented lid on the top of the tank to give you access to the inside of the tank. Did you know that you could collect rainwater from your greenhouse roof also your shed roof? You can create an inlet for a downpipe anywhere in the tanks surface by just drilling an outlet with a hole cutter. Water Butt V3 details Available in a variety of colours to suit location Manufactured from virgin polymer Approximate wall thickness: 6-7mm 9'' vented lid as standard 1'' BSP brass threaded outlet moulded into the tank Central baffles Water Butt V3 benefits Suitable for internal and external use Frost proof; will not crack in the cold Robust, heavy duty product; industrial strength Holds shape when tank is full Opaque plastic reduces algae growth in sunlight Slimline design; ideal when space is limited Rotationally moulded for strength and durability

Irritec Microtube Roll

Length: 300 metres External diameter of the microtube: 5.5 mm Internal diameter: 3.0 mm Material: PVC type 201 Color: black Weight: 2 kg

GT Comis Shears for Plastic Pipes

Shear for plastic pipes up to 42 mm. (polyethylene pipes up to 40 mm diameter and multilayer pipes up to 32 mm diameter) Snap opening, ratchet blade feed, quick opening after cutting, closing hook burr-free cutting of plastic pipes made of PE-PE-X, PP, VPE, PB, PVDF.

Climbing Roses (Red, Pink, White, Yellow, Orange)

Multibuy Savings for Climbing Roses from £12 / plant. Select your colour and pack of 5, 10, 15 or 20 plants.

N°20 Stakes for Anchoring to the Ground

Features Pegs D.16mm: Diameter: 16mm Method of use: anchorage to the ground Supported pipes: Polyethylene pipe or drip line Features Pegs D.20mm: Diameter: 20mm Use: anchorage to the ground Supported piping: Dripline or Polyethylene tubing    

Irritec NR.250 Rods 2 Holes x Microt

Rod 2 holes for capillary 2,5 - 3,2 mm external

Quick Coupling Kit for Pipe, diameter 16 mm

Irritec Kit N°50 Plug-In Olivettes for Microtube

Oil plug for semi-rigid/soft PVC microtube 3x5,5 Olivette diameter 5 mm.

Siplast Tandem Black Dripline, diameter 16 mm, pitch 33 cm

Length: 100 mt Pitch: 33 cm Minimum pressure: 1,5 bar Color: black Dripline material: polyethylene The result of decades of research and experience, this SIPLAST drip line is made from polyethylene tubing with a built-in dripper during extrusion, offering proven versatility and reliability. The turbulent flow dripper (self-cleaning) avoids sedimentation inside the labyrinth and it is possible to insert an inlet filter that greatly reduces the risk of clogging (purchased separately). The outlet holes of the dripper also allow for quick and easy installation, without the need to verify the position of the emission point, and ensure the emptying of the pipes at the end of the irrigation cycle.