Pricemate

Mitsubishi VL100EU5-E Lossnay Wall Mounted Single Room MVHR

Mitsubishi VL100EU5-E Lossnay Wall Mounted Single Room MVHR Unit (wall switch model) Product Part Number Losney VL-100 Wall Mounted Single Room MVHR unt (wall switch model) - VL-100EU5-E Description Mitsubishi VL-100EU5-E single room heat recovery unit for field supplied external wall switch. The wall mounted VL-100EU5-E is an efficient single room heat recovery unit for residential homes and small offices that require fresh, clean air and the removal of stale air with minimal heat loss. NOTE: The VL-100EU5-E has the option to fit a field supplied external wall switch. A wall switch for speed control is not supplied with the unit. Recommended switch option 'Quiet-Vent Rocker Switch". Technical Features Up to 80% Heat recovery 106 m3 h/r max flow Sound pressure (dBA) 25 – 37 Weight 7.5kg Dimensions W/D/H (mm) 620/ 200/ 265 2 x 75 (mm) spigots (ID)

GBP 299.10

1

Komfovent C4.1 Controller for Domekt R200-V

Komfovent C4.1 Controller for Domekt R200-V Product Part Number Komfovent C4.1 Controller for the R200 - 745201515 Description Smart control panel for Komfovent Domekt 200-V heat recovery unit. Ready to be fixed on a wall, surface mounted or recessed mounted. Magnetic holders allow you to fix the controller directly on to the unit. Dimensions H x W x D113mm x 90mm x 12mm

GBP 247.16

1

Vent Axia 240v Ambient Response Humidity Sensor

Vent Axia 240v Ambient Response Humidity Sensor Product Part Number Vent Axia Ambient response Humidity Sensor - 563550 Description An adjustable set point, solid state on/off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90%RH. Can be wired into controller "Auto" mode connections. Incorporates changeover switch to select low/high speed. Dimensions (H x W x D): 87 x 87 x 33 (mm)

GBP 360.00

1

Vent Axia Lo-Carbon Multivent MVDC-MSH unit with Humidity Sensor

Vent Axia Lo-Carbon Multivent MVDC-MSH unit with Humidity Sensor Product Part Number Vent Axia MVDC-MSH - 443298 Key Features Internal Humidity sensor Ultra-quiet - acoustically lined for low noise levels Recognised in SAP Appendix Q Complies with Building ADF (System 3) Option of wall, ceiling, and loft mounting Improved controllability The unit has Long life, low energy multispeed DC motor Ceiling, wall, or floor Installation is recommended PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels. Technical Features Max Airflow of 350m3/h Best in class Specific Fan Power (SFP) as low as 0.15 wls Dimensions (mm) 330 long x 391 wide x 248 high Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Switched Live Boost connection Fully variable normal and boost speeds Fully serviceable unit with all parts accessible 2-year standard or optional 5-year parts warranty Controllability The potentiometer-controlled speed selector allows accurate setting of airflow The unit has 2 fully variable speeds for trickle and boost, with an inbuilt humidistat activation for the boost speed. A switched live (LS) can also be used to select boost speed when wired through an Isolator Relay (Part No. 442030 - not supplied). An additional third speed (purge) is available using a second switched live connection. MVDC-MS H (443298) the Boost setting is activated by the internal humidity sensor. The internal humidity sensor uses one of the two available LS inputs, the other remaining LS input can be used to switch the unit to Purge speed. MVDC-MS H has the option to switch from Normal to Boost speed (in effect over-riding the internal humidity sensor), this can be achieved by connecting an isolated switched live connection to the LS connection on the power supply terminal block. This must be isolated by using, for example an Isolator Relay Control, Vent-Axia part number 442030, or similar. Isolator relay controller, Vent-Axia part number 442030

GBP 204.00

1

Vent Axia Lo-Carbon Multivent MVDC-MS unit

Vent Axia Lo-Carbon Multivent MVDC-MS Unit Product Part Number Vent Axia MVDC-MS - 437634 Key Features Variable speed settings Ultra-quiet - acoustically lined for low noise levels Complies with Building ADF (System 3) Option of wall, ceiling, and loft mounting Improved controllability The unit has Long life, low energy multispeed DC motor PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels Technical Features Max Airflow of 350m3/h Best in class Specific Fan Power (SFP) as low as 0.15 wls Dimensions (H x W x D) 310mm x 360mm x 249mm Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Recognised in SAP Appendix Q Switched Live Boost connection Fully variable normal and boost speeds Fully serviceable unit with all parts accessible 2-year standard or optional 5-year parts warranty Controllability The potentiometer-controlled speed selector allows accurate setting of airflow The unit has 2 fully variable speeds for trickle and boost, with an inbuilt humidistat activation for the boost speed. A switched live (LS) can also be used to select boost speed when wired through an Isolator Relay (Part No. 442030 - not supplied). An additional third speed (purge) is available using a second switched live connection. Isolator relay controller, Vent-Axia part number 442030

GBP 279.00

1

Domus CMX-MULTI MEV Unit

Domus CMX-MULTI MEV Unit Product Part Number Domus CMX-Multi MEV unit (2018) - CMX-Multi Domus CMX-Multi-H MEV unit c/w Humidity Sensor (2018) - cmx-multi-h Description This mechanical extraction ventilation unit is ideal for residential applications, the Domus CMX-MULTI is unit adapted for installation horizontally or vertically, allowing flexible placement. This unit has depth of 125mm, making it ideal for areas where space is restricted, such as small ceiling voids. The CMX-MULTI is designed for use in small to medium sized houses and apartments. The 204x60mm duct connections can be converted to round ducting via the use of additional adaptors if required. Technical Features Fantastic SFP as low as 0.14 (W/l/s) Max Extract Volume of 409mᶟh Dimensions: 595 x 340 x 125 (mm) 3 inlet spigots at 204x60mm Weight 3.1kg This unit has a low energy, high efficiency EC backward curved centrifugal impeller fan/motor assembly with sealed for life bearings suitable for +50°C to -25°C Construction The outer casing is manufactured from expanded polypropylene, reducing both weight and system noise. Due to its compact size it allows flexible installation Domus CMX-Multi MEV units can be installed horizontally or vertically and is ideal to be fitted inside kitchen/utility room cupboards, directly into a ceiling or loft space or within a joist space.

GBP 426.64

1

Nuaire ECO MEV

Nuaire ECO MEV Product Part Number MEV-ECO - ECO MEV-ECO with humidity sensor - ECO-H Description The MEV-ECO is a centralised extract system capable of extracting air from multiple wet rooms in a property. The unit offers the latest in low-watt DC fans, combining AC supply and DC voltages to bring you an extract fan that is both high powered and energy-efficient. The MEV-ECO provides quiet operation with reduced power consumption, low SFPs, and high airflow rates. At only 125mm deep, the unit saves space and ventilates up to 100 l/s. These MEV units are SAP recognised and have been designed to meet the most current building regulations, both Part F and Part L.

GBP 413.64

1

Vent Axia Lo-Carbon Multivent MVDC-MS

Vent Axia Lo-Carbon Multivent MVDC-MS - VMSMEVPK The Multivent continuous mechanical extract ventilation range is designed for the simultaneous extraction of up to several bathrooms/ Wet Rooms to a centrally positioned unit normally installed in the attic space Complete DIY Kit of a Vent Axia MVDS-MS multiple room extraction unit with insulated Flexible Ducting and fittings suitable for extraction of 7 separate areas Our Comprehensive DIY Kits have everything you should require installing the system to building control regulations Please note - You can purchase the MEV unit with or without the ductwork on this listing Key Features Vent Axia MVDC-MS multi room extraction unit Any products not required can be returned for full refund (excluding return delivery cost) Any extra products required will be discounted to the Kit Price (excluding delivery) Variable speed settings Ultra-quiet - acoustically lined for low noise levels Complies with Building ADF (System 3) Option of wall, ceiling, and loft mounting Improved controllability The unit has Long life, low energy multispeed DC motor PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels With a DC motor the Multispeed Multivent is one of the most efficient central extract units in the UK. The Multivent MVDC MS offers the option of ‘Close Control’ both in the residential and the commercial sectors. Technical Features Max Airflow of 350m3/h Best in class Specific Fan Power (SFP) as low as 0.15 wls Dimensions (H x W x D) 310mm x 360mm x 249mm Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Recognised in SAP Appendix Q Switched Live Boost connection Fully variable normal and boost speeds Fully serviceable unit with all parts accessible 2-year standard or optional 5-year parts warranty Controllability The potentiometer-controlled speed selector allows accurate setting of airflow The unit has 2 fully variable speeds for trickle and boost, with an inbuilt humidistat activation for the boost speed. A switched live

GBP 288.00

1

Vent Axia Lo-Carbon Pozidry Compact Pro

Vent Axia Lo-Carbon Pozidry Compact Pro Product Part Number Vent Axia Pozidry Pro Compact with Heater - 479188 Description The new Pozidry Compact Pro with integral heater now available! Technical Features 100mm duct connection Unit weight: 3kg Sound level @ 3m: 11.6-29.7 dB(A) Dimensions W x H x D: 393mm x 206mm x 200mm Removable inner cartridge for easy maintenance and repairs Filters - Washable, high capacity G4 or F7 filter Installation - Easy to install solution for mould and condensation in residential properties If the ambient temperature exceeds 27°C, the Lo-Carbon PoziDry Compact Pro will automatically switch off to prevent over-heating This temperature threshold can be adjusted at installation Models In the case of the integral 300W heater version, the heater element is automatically activated when necessary and tempers the supply air to a chosen temperature. Performance Speed FID (l/s) Power (W) No. Bedrooms Breakout dB(A) @ 3m 1 13 4.0 1 11.6 2 17 8.3 2 18.9 3 21 12.5 3 15.4 4

GBP 414.00

1

Domus CMX-S MEV Unit

Domus CMX-S MEV Unit Product Part Number Domus CMX-S MEV unit - CMX-S Description Previously known as the Polypipe or Silavent Green Line CMX At just 125mm in depth, the CMX is one of the most versatile, easy to install and energy efficient MEV solutions available on the market. Ideal for installation in a wide range of properties, the CMX offers a depth of just 125mm, making it ideal for small ceiling voids or for where space is restricted. Fits into ceiling voids and utility cupboard spaces – horizontally or vertically The 220x90 duct connectors can be converted to 150 round using additional adaptors if required. Technical Features Max Airflow of 430m3/h Specific Fan Power (SFP) as low as 0.24 wls Dimensions (mm) 710 long x 340 wide x 125 high Fitted with two 220x90 duct connections allowing quick connection to ducts Suitable for a floor area up to 275m² The appliance has a low energy, high efficiency EC backward curved centrifugal impeller fan/motor assembly with sealed for life bearings suitable for +50ºC to -25 ºC. Also referred to as System 3 in Approved Document F of the Building Regulations, an MEV system consists of a centralised ventilation unit that continuously extracts waste, polluted and moist air from wet rooms and can be discreetly positioned in either a cupboard, utility room, ceiling or loft space. An MEV system can be ducted throughout the dwelling and operated by the homeowner through a range of control options. Controllability Typically dual speed, MEV systems provide both low speed continuous trickle ventilation and high-speed boost flow when required. Replacement fresh air is drawn into the dwelling through background ventilators i.e. air inlets, located in the living areas. The potentiometer-controlled speed selector allows accurate setting of 3 airflow speeds The unit has 3 fully variable speeds for trickle and boost, A switched live (LS) can also be used to select boost speed An additional third speed (purge) is available using a second switched live connection. Construction PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels. Accessories ANC848A Manual LOW/BOOST switch Manual BOOST selection switch. LOW speed is engaged upon connection of mains supply. Both speeds are manually adjustable at the wiring centre to facilitate Building Regulation commissioning speeds. ANC849A Manual

GBP 386.03

1

Brand

Merchant

Price (EUR)