3 results (0,12980 seconds)

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Xpelair Contour CV4SR - Constant volume fan

Xpelair Contour CV4SR - Constant volume fan

Xpelair Contour CV4SR - 92968AW / 78377 The Simply Silent™ Contour CV range has been designed to offer exceptionally low noise levels, while delivering a constant volume of extracted air to eliminate humidity, condensation and mould growth in bathrooms, shower rooms, cloakrooms, toilets, and kitchens. The fans airflow can be set at install to either bathroom or kitchen mode, by operating in trickle mode at 5l/s or 8 l/s and boosting as required up to 18l/s, allowing the fan to be used as a whole house dMEV solution. Ideal for social housing and specification, the fans feature a data logger to record the fans daily use and how long the fan has been in operation helping landlords and local authorities to avoid damage to their housing stock through condensation and mould. These fans feature Xpelair’s Intelligent Adaptiflow™ Sensing to deliver constant volume performance through a unique sensor housed within the duct.This sensor calculates and records the airflow of the fan and adapts the fan speed intuitively in accordance with changes in airflow to maintain the required setting. Key Features Continuous running D-MEV fan Ghost air movement for quiet operation Integral humidity sensor Intelligent Adaptiflow™ Sensing selectable bathroom and kitchen airflow, with 3 speeds in each mode Data logger Wall / ceiling / panel installation Slim profile   With very low power consumption the fan costs as little as £1.64 * a year to run in bathroom mode and £1.94 * in kitchen mode, making them an extremely cost-effective solution. Technical Features IPX4 rating for Zone 1 and 2  Continuous Airflow of up to 18 Ls   1.6 to 3.7 watts D/C fan Specific fan power as low as 0.16wls 2 Year Warranty Sound Level (dba@3m) Max 28 CV4S packed dimensions W x H x D: 210mm x 140mm x 210mm CV4S packed weight: 0.6kg CV4R packed dimensions W x H x D: 230mm x 190mm x 170mm CV4R pack weight: 2.2kg

GBP 113.56
1

Vent Axia Centra

Vent Axia Centra

Lo-Carbon Centra Lo-Carbon Centra has a specific fan power of only0.18 W/l/s in through-the-wall kitchen applications. Product Part Number 441782B Description The Lo-Carbon Centra meets the latest requirementsof the Building Regulations Approved Document Ffor wholehouse system ventilation.Selection of the two normal flow rates (6l/s or9l/s) is via a simple ‘jumper’ on the control board.Different methods are available for operatingboost speed from a simple switched live to integralhumidistat. See individual models for further details.The attractive and discreet styling of the Vent-AxiaLo-Carbon Centra will complement the décorof any new home while virtually silent operationensures optimum ventilation is achieved withoutintrusive noise. Key Features • Building Regulations ApprovedDocuments F and L compliant, System 3Continuous mechanical extract• Recognised in SAP Appendix Q- Low SFP on SAP Q• Quietest dMEV available• Discreet, tasteful styling• Single fan for use in all applications• IPX4 rated - IPX7 rated (SELV)• Pressure detection device• Normal and Boost speeds• Lo-Carbon motor offering 90% energysavings and long life• 5 Year Motor Guarantee• Suitable for wall, ceiling, panel andwindow mounting• SELV Models - Supplied with a remotetransformer• SELV Models Suitable for ‘Zone 1’installation Air Pressure Sensor Auto speed selection at installation. The integralair pressure sensor checks the airflow when firstinstalled and also helps the fan to compensate forexternal wind pressure. BPC Support We don’t sell boxes we provide a service that few can match Free Lifetime Technical support on purchased items Largest independent MVHR suppliers Lowest cost on full systems guarantees Inhouse design Team Inhouse certified training Largest rage and stock available Worldwide delivery options Solutions available from Value to prestige housing  

GBP 112.32
1

Vent Matika EKA standard duct heater

Vent Matika EKA standard duct heater

Vent Matika EKA standard duct heater Description The Vent Matika EKA range of electric duct heaters are Used in ventilation systems as heaters for comfort, or preheaters, to protect the ventilation unit from frost. The Vent Matika EKA standard range have no integrated control BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, KEY FEATURES – Vent Matika EKA standard heater No integrated control Internal temperature regulator May be used as a Pre Heater or a Post Heater Twin overheating protection Easy to use screw terminals Rubber sealed ductwork connections Can be installed both horizontally and vertically Stainless steel heating element Aluzinc Casing CE, RoSH & Reach certified Control Options No integrated control feature on this unit and we recommend connection to a EKR electric heater control and sensors or 3rd party control panel with fused supply  (electrician installation recommended) Overheating Protection The EKA has two overheat protection thermostats installed in the electrical circular heater The first one with automatic reset, turns off the heating when the temperature reaches 50 °C and turns on when the temperature drops below 50 °C. The second with manual safety reset, turns off the heating when the temperature reaches 100 °C. In this case you need to figure the cause of the overheating of the heater. Eliminate the overheating cause and press the RESET button on the heaters cover. Construction Manufactured of from Aluzinc coated steel which is high temperature proof Mounting Heaters can only be installed inside away from moisture and mounted horizontally with the electrical connection box facing upwards or sideways and vertically (only if the air flow direction upwards). Temperature The maximum temperature of the output is 50 °C. Dimensions Models These models are kept in stock, but other sizes and power outputs are available to order and please contact our team for cost and availability 100mm - 0.6kw Electric Duct Heater - EKA-100-0.6 125mm - 1.2kw Electric Duct Heater - EKA-125-1.2 160mm - 1.2kw Electric Duct Heater - EKA-160-1.2 160mm - 2.4kw Electric Duct Heater - EKA-160-2.4 200mm - 3.0kw Electric Duct Heater - EKA-200-3.0 250mm - 3.0kw Electric Duct Heater - EKA-250-3.0 Optional Accessories EKR 6.1 - electric heater controller for single phase electric heaters up to 6 kw. Controls by supply* or room temperature. Has an internal temperature sensor in casing, an additional TJ-K10K duct mounted supply air temperature sensor is also required for operation in both modes.  BPC Support We don’t sell boxes; we provide a service that few can match Free Lifetime Technical support on purchased items Largest independent MVHR suppliers Lowest cost on full systems guaranteed Inhouse design Team Inhouse certified training Largest range and stock available Worldwide delivery options MVHR Solutions available from Value to Prestige housing

GBP 121.73
1