Pricemate

Vent Axia Sentinel Multivent H Unit

Vent Axia Sentinel Multivent H Unit Product Part Number Vent Axia Sentinel Multivent with Humidity Sensor - 445655 Key Features Internal Humidity sensor Integral LCD display allows the installer to select appropriate low, normal and boost speeds to meet demand Ultra-quiet - acoustically lined for low noise levels Demand Control - enables precise ventilation rate, is set in 1% increments based on property size Manual and automatic control options Integral adjustable overrun timer and delay on timer Plug-n-Play automatic sensor detection Switched live and SELV connections PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels Technical Features Max Airflow of 450m3/h Energy efficient EC/DC motors - 1/3 less energy lost to heat than a conventional AC motor Best in class Specific Fan Power (SFP) as low as 0.16 wls Dimensions (mm) height 310mm, width 360mm, depth 260mm Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Option of wall, ceiling, and loft mounting Fully serviceable unit with all parts accessible Dry Out setting – Option set at installation, Sentinel Multivent will run on boost for 1 week to assist in removing moisture Recognised in SAP Appendix Q Complies with Building ADF (System 3) 2-year standard or optional 5-year parts warranty Humidity Sensor The integral humidity sensor (Sentinel Multivent H) increases fan speed in proportion to relative humidity levels, saving energy and reducing noise The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room Night-time relative humidity increment setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Controllability Demand Control - enables precise ventilation rate, is set in 1% increments based on property size Integral LCD display allows the installer to select appropriate low, normal and boost speeds to

GBP 505.80

1

Komfovent Domekt R-700-H Heat Recovery Unit

Komfovent Domekt R-700-H Heat Recovery Unit Product Part Number Komfovent R700 H Left Hand - 1131533 Komfovent R700 H Right Hand - 1131532 Description The Komfovent Domekt R-700-H heat recovery unit is a high-quality Horizontal floor mounted rotary wheel unit suitable for new houses up to 440m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R700 H Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 440m2 Airflow rate @100Pa – 742 m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A+’ energy rating High heat recovery efficiency of up to 84%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase

GBP 4817.20

1

Vac Supermini

Vac Supermini Product Part Number Vac Supermini - UD6010/SC Technical Characteristics Power(W): 1500 Air-Flow(m³/h): 190 Waterlift(mm/H²O): 3.000 Airwatts: 550 Hepa Cartridge filter surface area(cm²): 5.000 Bin Capacity(L): 20 Noise level(dB): ≤60 Weight(kg): 12 High-speed through-flow motor Recommendation for installation Dwelling size in m²: ≤300 Furthest Valve from the unit(lm): 30 Maximum number of inlet valves: 6-7

GBP 544.00

1

Vac Mini

Vac Mini Product Part Number Vac Mini - UD6011/SC Technical Characteristics Power(W): 1500 Air-Flow(m³/h): 190 Waterlift(mm/H²O): 3.000 Airwatts: 550 Hepa Cartridge filter surface area(cm²): 5.000 Bin Capacity(L): 28 Noise level(dB): ≤60 Weight(kg): 12 High-speed through-flow motor Recommendation for installation Dwelling size in m²: ≤300 Furthest Valve from the unit(lm): 30 Maximum number of inlet valves: 6-7

GBP 590.22

1

Komfovent Domekt R-700-V Heat Recovery Unit

Komfovent Domekt R-700-V Heat Recovery Unit Product Part Number Komfovent Left Hand R700V Rotary wheel vertical unit - Domekt-R-700-V-L Komfovent Right Hand R700V Rotary wheel vertical unit - Domekt-R-700-V-R Description The Komfovent Domekt R-700-V heat recovery unit is a high-quality rotary wheel unit suitable for new houses up to 480m2. Technical Features Suitable for house sizes up 480m2 Maximum airflow rate - 850m3/h Airflow rate @ 100Pa - 764m3/h Optional direct connection to kitchen cooker hood Provides up to 83% heat recovery Sound level @3m - 34 dB(A) Weight - 114kg Dimensions W x H x D – 1070mm x 950mm x 645mm Duct diameter – 250mm Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish. The fan motors are protected from humidity and dust as well as being equipped with long-life bearings.

GBP 4168.82

1

Panasonic Heat Recovery Ventilation System - PAW-A2W-VENTA

Panasonic Heat Recovery Ventilation Unit - PAW-A2W-VENTA Heat recovery ventilation unit is designed not only to provide a good indoor air quality, but it is also designed to recovery heat that would otherwise be lost throughout ventilation. These heat recovery ventilation systems are used in low energy home to assist in the retention of heat. Key Features Designed for areas up to 140m2 High energy-efficiency rotary heat exchanger with EC – technology fans Moisture transfer function to minimize condensation in supply air during wintertime The built-in humidity sensor in extract air can be used for demand control Control via touch display and start-up wizard for easy commissioning Modbus communication via RS-485 Option to control and Aquarea H or J generation heat pump from PAW-A2W-VENTA control panel (PAW-AW-MSB-H and PAW-VEN-ACCPCB required) Technical Features Weight – 46kg Dimensions 500mm x 598mm x 450mm 125mm duct diameter 100% Summer Bypass Passive House Approved Provides up to 83% heat recovery efficiency Control User-Friendly Interface All settings and features accessible via a control panel, integrated into the front cover. The option for connecting one or more external control panels is available. Colour touch screen with a user-friendly interface Manual and auto mode or chose preferred settings for the pre-configured user modes If Aquarea H and J generations heat pumps are connected with PAW-A2W-VENTA, the heat pump control option appear on the home screen in a separate tab

GBP 1996.65

1

Zehnder Caladair Exaeco

Zehnder Caladair Exaeco Commercial Air Handling Unit Product Part Number Caladair EXAECO 10 D - CAL62 Caladair EXAECO 13 D - CAL63 Caladair EXAECO 17 D - CAL64 Caladair Exaeco 22 D - CAL65 Key features Recovers up to 80% of energy Flow rates from 5000 to 220000 m3/h Large application scope from group housing to the service sector and even hospital applications FEE – free energy efficiency Maximum optimised of energy gains Energy savings up to 40% Free cooling Cold recovery Night time cooling CO2 probe on exhaust air, maintains a suitable CO2 rate Improves indoor quality, Pure and Eden models purify your indoor environment 3 ways module mixing system controlled by regulation system and provide anti-freeze, insulation and fire safety Units - Caladair Exaeco 10 - Caladair Exaeco 13 - Caladair Exaeco 17 - Caladair Exaeco 22 Models The Caladair Exaeco unit is available in 4 sizes and 8 models, the ranges cover airflow rates from 5000 to 22000 m3/h. Exaeco®: self-regulated energy recovery unit without heating coils, with FEE® function for optimisation of energy consumption. Exaeco Elite®: The Exaeco unit combined with the Elite module for climate comfort with the choice of one or a combination of two heating coils: water heating coil, electric heating coil, changeover coil, water cooling coil, direct expansion coil, cold only or reversible. Elite modules can be fitted with: - Hot water coil only (H). - Electric heating coil (E). - Hot water coil and cold-water coil (HC). - Electric heating coil and cold-water coil (EC). - Hot water coil and direct expansion coil (HDX). - Electric heating coil and direct expansion coil (EDX).

GBP 22067.82

1

Special Offer Panasonic Counter Flow Ventilation VENTX 40V

Description PAW-VENTX–V is a ventilation unit complete with a heat recovery exchanger cell which is dedicated to changing air without wasting energy. The unit is particularly suitable for single family units, flats and in all cases where the nominal flow rates for air exchange do not exceed 380 m³/h. The unit is designed for installation inside buildings protected from the weather in a vertical wall position with ducted air distribution. Counter flow ventilation units are equipped with two fans to supply and extract air. A cross-flow heat exchanger recovers the energy contained in the extracted air and transfers it to the supplied air. This significantly reduces the building’s energy consumption, while at the same time keeping a good quality of the indoor air. The PAW-VENTX range is a fixed speed controlled unit, these models are recommended by us for Renovation projects only. Structure: self-supporting sheet metal frame, interior in high density EPS 30 kg/m³ and polyethylene foam. Carpentry and internal plugging in thick galvanised sheet metal. counterflow type: sensible polypropylene version Brushless fans: DC fans regulated by inverters allow high levels of comfort and energy efficiency with constant flow function. Filters: EPM1 filter on fresh air and extract air with low pressure drop. Easily removable for routine maintenance. Models: 2 sizes with different flow rates are available. PAW-VENTX-30V PAW-VENTX-40V Configurations: the unit is configurable in air flows according to the position of the room side and the outdoorside.• A factory configuration• B configuration modifiable on site Vertical Unit Airflow nominal: 266m³/h Airflow Maximum: 380m³/h Dimensions HxWxD: 590 x 576 x 795mm Weight 38kg *Requires Controller* Digital Controller for Panasonic Counter Flow systems(PAW-VENTX) 3 position fixed speed conroller (no accessible adjustment)

GBP 1080.00

1

Special Offer Panasonic Counter Flow Ventilation VENTX 30V

Description PAW-VENTX–V is a ventilation unit complete with a heat recovery exchanger cell which is dedicated to changing air without wasting energy. The unit is particularly suitable for single family units, flats and in all cases where the nominal flow rates for air exchange do not exceed 300 m³/h. The unit is designed for installation inside buildings protected from the weather in a vertical wall position with ducted air distribution. Counter flow ventilation units are equipped with two fans to supply and extract air. A cross-flow heat exchanger recovers the energy contained in the extracted air and transfers it to the supplied air. This significantly reduces the building’s energy consumption, while at the same time keeping a good quality of the indoor air. The PAW-VENTX range is a fixed speed controlled unit, these models are recommended by us for Renovation projects only. Structure: self-supporting sheet metal frame, interior in high density EPS 30 kg/m³ and polyethylene foam. Carpentry and internal plugging in thick galvanised sheet metal. counterflow type: sensible polypropylene version Brushless fans: DC fans regulated by inverters allow high levels of comfort and energy efficiency with constant flow function. Filters: EPM1 filter on fresh air and extract air with low pressure drop. Easily removable for routine maintenance. Models: 2 sizes with different flow rates are available. PAW-VENTX-30V PAW-VENTX-40V Configurations: the unit is configurable in air flows according to the position of the room side and the outdoorside.• A factory configuration• B configuration modifiable on site Vertical Unit Airflow nominal: 210m³/h Airflow Maximum: 300m³/h Approximate Property area capacity: 179m2 Dimensions HxWxD: 590 x 576 x 795mm Weight 38kg *Requires Controller* Digital Controller for Panasonic Counter Flow systems(PAW-VENTX) 3 position fixed speed conroller (no accessible adjustment)

GBP 960.00

1

Sachvac Dynamic 2.4 Central Vacuum Unit

Sachvac Dynamic 2.4 Central Vacuum Unit High performance of Air watt 835, Water lift 2800, Air flow 294 M3/h Easy to empty large 28 litre container 3 stage filtration Filtration Cyclonic collection (no bags) Easy to clean anti static filter Hepa filter Hose Kit The Sachvac Dynamic has the benefit of using the on/off hose with a on/off control on handle Both the handle and the cuff have 360` rotation for easy kink free operation The quality 10 piece kit comes complete with 8 or 10 meter professional hose Combination floor tool Hard Floor brush Dust Brush Telescopic wand Upholstery Tool Tool holder Crevice tool Hose hanger Tool Caddy bag

GBP 664.16

1

Komfovent RHP 1200 - RHP 1200 9.3/7.9 UV C5

Komfovent RHP 1200-UV Air Handling Unit - RHP 1200 9.3/7.9 UV C5 Key Features Extremely high energy efficiency Provides total comfort all year long Supplies fresh, clean and dust free air Heating and humidity recovery in winter Cooling and dehumidifying in summer Plug and play installation Compact design Provides Ventilation, Cooling, supplementary heating, air filtration and humidity control *Additional accessories may be required Technical Features Suitable for home sizes up to 500m2 Maximum airflow rate - 1300m3/h Weight - 260kg Sound level @ 3m - 45dB(A) Dimensions W x H x D - 1505mm x 905mm x 905mm Duct diameter - 250mm Two Step Heating and Cooling RecoveryTo reach maximum efficiency these units are designs to recovery energy in two steps Step 1: Recovery by enthalpy rotary heat exchanger Step 2: Recovery by reversible heat pump Cooling Mode - due to cooling recovery by rotary heat exchanger, the air temperature after the rotor is lower than the outside air temperature. Condensation temperature in this case is lower, which results in reduced compressor electricity consumption compared with outdoor condensing unit Heating Mode - a highly efficient rotary heat exchanger is used for first-stage heat recovery, recovering the biggest part of the heat of extracted air. For second-stage heat recovery and supply air temperature control a heat pump is used Controllability Intelligent control with algorithms and reliable components to ensure safe and efficient operation. This unit can be controlled via a digital C5.1 controller ConstructionRHP units are constructed of galvanized steel sheets, which are powder coated. Mineral wool is used for thermal insulation and sound attenuation. Unit cover panels are 45 mm thick.

GBP 16643.00

1

Komfovent RHP 800-U Air Handling Unit

Komfovent RHP 800-U Air Handling Unit - RHP-800 C6/5.8-UV/UH Key Features Extremely high energy efficiency Provides total comfort all year long Supplies fresh, clean and dust free air Heating and humidity recovery in winter Cooling and dehumidifying in summer Plug and play installation Compact design Provides Ventilation, Cooling, supplementary heating, air filtration and humidity control *Additional accessories may be required Technical Features Suitable for home sizes up to 500m2 Maximum airflow rate - 800m3/h Weight - 255kg Sound level @ 3m - 40dB(A) Dimensions W x H x D - 1505mm x 905mm x 905mm Duct diameter - 250mm Two Step Heating and Cooling RecoveryTo reach maximum efficiency these units are designs to recovery energy in two steps Step 1: Recovery by enthalpy rotary heat exchanger Step 2: Recovery by reversible heat pump Cooling Mode - due to cooling recovery by rotary heat exchanger, the air temperature after the rotor is lower than the outside air temperature. Condensation temperature in this case is lower, which results in reduced compressor electricity consumption compared with outdoor condensing unit Heating Mode - a highly efficient rotary heat exchanger is used for first-stage heat recovery, recovering the biggest part of the heat of extracted air. For second-stage heat recovery and supply air temperature control a heat pump is used Controllability Intelligent control with algorithms and reliable components to ensure safe and efficient operation. This unit can be controlled via a digital C5.1 controller ConstructionRHP units are constructed of galvanized steel sheets, which are powder coated. Mineral wool is used for thermal insulation and sound attenuation. Unit cover panels are 45 mm thick.

GBP 14348.71

1

Zehnder Caladair Thermover

Zehnder Caladair Thermover Double Flux Air Treatment Station Product part Number Caladair THERMOVER 180S FIRST - CAL58 Caladair THERMOVER 280S FIRST - CAL59 Caladair THERMOVER 400S FIRST - CAL60 Caladair THERMOVER 500S FIRST - CAL61 Key Features High energy efficient double flux air treatment High performance Range of four different unit sizes Flows rates from 600 to 500 m3/h Can operate in constant pressure or constant flow modes F7 filters Low noise level for acoustic comfort 100% plug and play FEE® - Free energy efficiency Cool recovery, free cooling and night cooling Increases good indoor air quality determined by CO2 sensor 2 years parts warranty Energy savings of up to 40% Unit Range - Caladair Thermover 180S - Caladair Thermover 280S - Caladair Thermover 400S - Caladair Thermover 500S Models Available in 4 models and 4 versions, the Thermover range covers flow rates from 600 to 5000 m3/h. The Thermover range is available in 4 versions in order to suit different usage conditions: First: Self-regulating, plug & play, Modbus RS485 networked station for use in a temperate climate supported by a reversible, thermodynamic system, active temperature management through optimised energy consumption and climate control as well as continued indoor air quality control (IAQ) via a CO2 sensor. Premium: Identical to First but also equipped with an electric battery for precision heating and air blow or ambient intake temperature control for external temperatures as low as -15°C. Must: First features and also including integrated hydraulic kit for ECS production in all seasons. Genius: Identical features to Premium including integrated hydraulic kit for ECS production. Filtration Thermover units are fitted with F7 opacimetric filters for the supply and extract airflows.

GBP 24490.87

1

Komfovent RHP 400-V Air Handling Unit

Komfovent RHP 400-V Air Handling Unit Product Part Number Komfovent RHP-400V Rotary wheel vertical unit with heat pump - RHP-400V Description Komfovent RHP range are air handling units with an integrated heat pump, this unit features all HVAC systems in one unit providing complete indoor microclimate control. Komfovent RHP 400-V air handling unit provides ventilation in premises up to 220m2. Technical Features Suitable for home sizes up to 220m2 Maximum airflow rate - 398m3/h Weight - 106kg Sound level @ 3m - 44dB(A) Dimensions W x H x D - 712mm x 892mm x 618mm Duct diameter 160mm Two Step Heating and Cooling Recovery To reach maximum efficiency these units are designs to recovery energy in two steps Step 1: Recovery by enthalpy rotary heat exchanger Step 2: Recovery by reversible heat pump Cooling Mode Due to cooling recovery by rotary heat exchanger, the air temperature after the rotor is lower than the outside air temperature. Condensation temperature in this case is lower, which results in reduced compressor electricity consumption compared with outdoor condensing unit Heating Mode A highly efficient rotary heat exchanger is used for first-stage heat recovery, recovering the biggest part of the heat of extracted air. For second-stage heat recovery and supply air temperature control a heat pump is used Controllability Intelligent control with algorithms and reliable components to ensure safe and efficient operation. This unit can be controlled via a digital C5.1 controller Construction RHP units are constructed of galvanized steel sheets, which are powder coated. Mineral wool is used for thermal insulation and sound attenuation. Unit cover panels are 45 mm thick.

GBP 7251.69

1

Komfovent RHP-600 4.4/3.8-UV/UH

Komfovent RHP 600-U Air Handling Unit Product Part Number Komfovent RHP-600V Rotary wheel vertical unit with heat pump - RHP-600 4.4/3.8-UV Komfovent RHP-600H Rotary wheel Horizontal unit with heat pump - RHP-600 4.4/3.8-UH Description Komfovent RHP range are air handling units with an integrated heat pump, this unit features all HVAC systems in one unit providing complete indoor microclimate control. Komfovent RHP 600-U air handling unit provides ventilation in premises up to 400m2. RHP units with heat pump drain. Technical Features Suitable for home sizes up to 375m2 Maximum airflow rate - 650m3/h Weight - 194kg Sound level @ 3m - 41dB(A) Dimensions W x H x D - 1254mm x 878mm x 650mm Duct diameter - 200mm Two Step Heating and Cooling Recovery To reach maximum efficiency these units are designs to recovery energy in two steps Step 1: Recovery by enthalpy rotary heat exchanger Step 2: Recovery by reversible heat pump Cooling Mode Due to cooling recovery by rotary heat exchanger, the air temperature after the rotor is lower than the outside air temperature. Condensation temperature in this case is lower, which results in reduced compressor electricity consumption compared with outdoor condensing unit Heating Mode a highly efficient rotary heat exchanger is used for first-stage heat recovery, recovering the biggest part of the heat of extracted air. For second-stage heat recovery and supply air temperature control a heat pump is used Controllability Intelligent control with algorithms and reliable components to ensure safe and efficient operation. This unit can be controlled via a digital C5.1 controller Construction RHP units are constructed of galvanized steel sheets, which are powder coated. Mineral wool is used for thermal insulation and sound attenuation. Unit cover panels are 45 mm thick.

GBP 10832.18

1

Komfovent Verso Commercial Heat Recovery Unit

Komfovent Verso Commercial Heat Recovery Units Product Part Number Komfovent CF-1000F Counterflow Flat Commercial unit with Electric Heater - Verso-CF-1000F Komfovent CF-1000F Counterflow Flat Commercial unit No Heater - Verso-CF-1000F-WDH Komfovent CF-1300F Counterflow Flat Commercial unit with Electric Heater - Verso-CF-1300F-E Komfovent CF-1300F Counterflow Flat Commercial unit No Heater - Verso-CF-1300F-WDH Komfovent CF-1500F Counterflow Flat Commercial unit with Electric Heater - Verso-CF-1500F-E Komfovent CF-1500F Counterflow Flat Commercial unit No Heater - Verso-CF-1500F-WDH Description These units are specified directly to your projects, please contact our team on 028 2827 5150 Verso units are designed for efficient ventilation and are suitable for various types of projects. You can choose a unified unit from the version standard series, or pro which can be specifically tailored to meet your requirements. Large number of configurations (vertical, horizontal, flat, and universal type with rotary or plate heat exchangers) allow you to always select optimal and most efficient solution. Please contact us for pricing Energy Recovery Non-freezing rotary heat exchangers efficiently recovery heat and cold, they control the humidity and provide comfort throughout the year. PM Motors Ultra-premium efficient IE5 class PM fan motors minimize power consumption and ensure durability of the unit. Energy Saving Technologies Units are equipped with the most efficient and advanced technical solutions: high efficiency PM/EC of ultra and premium classes, non-freezing condensing and sorption rotary heat exchangers, high efficiency counter flow heat exchangers, high surface area air filters. All of these solutions greatly reduce operational costs and shorten playback time. Verso Standard Unit capacity 100-8000m3/h R models feature a rotary heat exchanger CF models feature a counterflow plate heat exchanger Supply air unit verso S Vertical, horizontal, flat, or universal applications Compact design Verso Pro Specifically tailored to meet your requirements. This series offers large number of configurations and integrated c5 control system Unit capacity 1000-40000 m3/h 10 basic sizes for

GBP 4729.54

1

Zehnder Caladair Commercial Hexamotion Heat Recovery Ventilation Units

Zehnder Caladair Commercial Hexamotion Heat Recovery Ventilation Units Product Part Number Caladair HEXAMOTION 05 D FIRST ECO - CAL49 Caladair HEXAMOTION 08 D FIRST ECO - CAL50 Caladair HEXAMOTION 15 D FIRST ECO - CAL51 Caladair HEXAMOTION 20 D FIRST ECO - CAL52 Caladair HEXAMOTION 27 D FIRST ECO - CAL53 Caladair HEXAMOTION 35 D FIRST ECO - CAL54 Caladair HEXAMOTION 45 D FIRST ECO - CAL55 Caladair HEXAMOTION 60 D FIRST ECO - CAL56 Caladair HEXAMOTION 80 D FIRST ECO - CAL57 Key Features Airflow rates from 100 to 8000 m3/h Heat recovery efficiency up to 80% Self-regulating plug & play Air filtration, temperature control and climate comfort Multilingual communication High-performance variable speed rotary heat exchanger Suitable for office and industrial applications Low noise level for better acoustic comfort Cold recovery Heat recovery Night time cooling Dimensions Model Length (mm) Width (mm) Height (mm) 05 1215 675 805 08 1345 805 925 15 1500 805 925 20

GBP 5654.81

1

Sachvac Dynamic 1.8 Central Vacuum Unit

Sachvac Dynamic 1.8 Central Vacuum Unit Product Part Number Dynamic 1.8 Central Vacuum Unit - UD6002-SC/E Dynamic 1.8 Central Vacuum Unit with 8m On-Off Hose Kit - UD6002/35/8-SC Dynamic 1.8 Central Vacuum Unit with 10m On-Off Hose Kit - UD6002/35/10-SC Features 1800 Watt slow start by-pass motor with 5 year warranty The unit has no display panel but has a thermal cut off and manual over ride switch High performance of Air watt 643 Water lift 3300, Air flow 210 M3/h Easy to empty large 28 litre container 3 stage filtration Filtration Cyclonic collection (no bags) Easy to clean filter Hepa filter Hose Kit The Sachvac Dynamic has the benefit of using the on/off hose with a on/off control on handle Both the handle and the cuff have 360` rotation for easy kink free operation The quality 10 piece kit comes complete with 8 or 10 meter professional hose Combination floor tool Hard Floor brush Dust Brush Telescopic wand Upholstery Tool Tool holder Crevice tool Hose hanger Tool Caddy bag

GBP 530.33

1

Special Offer - Panasonic Heat Recovery Ventilation Left Hand Unit - PAW-A2W-VENTA-L

Special Offer Panasonic Heat Recovery Ventilation Left Hand Unit - PAW-A2W-VENTA-L A heat recovery ventilation unit is designed not only to provide good indoor air quality but it is also designed to recover heat that would otherwise be lost throughout ventilation. These heat recovery ventilation systems are used in low-energy home to assist in the retention of heat. Technical Features Weight – 46kg Dimensions 500mm x 598mm x 450mm 125mm duct diameter 100% Summer Bypass Passive House Approved Provides up to 83% heat recovery efficiency Control User-Friendly Interface All settings and features are accessible via a control panel, integrated into the front cover. The option for connecting one or more external control panels is available. Colour touch screen with a user-friendly interface Manual and auto mode or chose preferred settings for the pre-configured user modes If Aquarea H and J generations heat pumps are connected with PAW-A2W-VENTA, the heat pump control option appears on the home screen in a separate tab

GBP 1200.00

1

Sachvac Dynamic 1.6 Central Vacuum Unit

Sachvac Dynamic 1.6 Central Vacuum Unit Product Part Number Sachvac Dynamic 1.6 Central Vacuum Unit - UD6001/SC/E Sachvac Dynamic 1.6 Central Vacuum Unit with 8m On-Off Hose Kit - UD6001/35/8-SC Sachvac Dynamic 1.6 Central Vacuum Unit with 10m On-Off Hose Kit - UD6001/35/10-SC Features: 1600 Watt slow start by-pass motor with 5 year warranty The unit has no display panel but has a thermal cut off and manual over ride switch High performance of Air watt 591, Water lift 3100, Air flow 190 M3/h Easy to empty large 20 litre container 3 stage filtration Filtration Cyclonic collection (no bags) Easy to clean filter Hepa filter Hose Kit The Sachvac Dynamic has the benefit of using the on/off hose with a on/off control on handle Both the handle and the cuff have 360` rotation for easy kink free operation The quality 10 piece kit comes complete with 8 or 10 meter professional hose Combination floor tool Hard Floor brush Dust Brush Telescopic wand Upholstery Tool Tool holder Crevice tool Hose hanger Tool Caddy bag

GBP 488.27

1

Sachvac Digital 1.6 Central Vacuum Unit

Sachvac Digital 1.6 Central Vacuum Unit Product Part Number Sachvac Digital 1.6 with no Hose - UD6004-SC/E Sachvac Digital 1.6 with 8m On-Off Hose kit - UD6004/35/8-SC Sachvac Digital 1.6 with 8m On-Off Hose kit - UD6004/35/10-SC High performance of Airwatt 591, Waterlift 3100, Air flow 190 M3/h Easy to empty large 20 litre container 3 stage filtration Filtration Cyclonic collection (no bags) Easy to clean filter Hepa filter Digital Display panel showing a variety of functions- Box full Service required Filter warning Power on Motor fault Remote Display Panel It is now possible to to view all information provided by the central vacuum with a remote display on the wall of your house - Ideal if your unit is in a garage or basement (included with unit) Hose Kit The Sachvac Digital has the benefit of using the ON/Off Plus hose with a variable speed control on the handle allowing you to reduce or increase the suction power when required Both the handle and the cuff have 360` rotation for easy kink free operation The quality 10 piece kit comes complete with 8 or 10 meter professional hose Combination floor tool Hard Floor brush Dust Brush Telescopic wand Upholstery Tool Tool holder

GBP 617.75

1

Sachvac Digital 1.8 Central Vacuum Unit

Sachvac Digital 1.8 Central Vacuum Unit Product part Number Sachvac Digital 1.8 Central Vacuum Unit with no Hose Kit - UD6005-SC/E Sachvac Digital 1.8 Central Vacuum Unit with 8m On-Off Plus Hose Kit - UD6005/35/8-SC Sachvac Digital 1.8 Central Vacuum Unit 10m On-Off Plus Hose Kit - UD6005/35/10-SC High performance of Airwatt 643, Waterlift 3300, Air flow 210 M3/h Easy to empty large 28 litre container 3 stage filtration Filtration Cyclonic collection (no bags) Easy to clean filter Hepa filter Digital Display panel showing a variety of functions- Box full Service required Filter warning Power on Motor fault Remote Display Panel It is now possible to to view all information provided by the central vacuum with a remote display on the wall of your house - Ideal if your unit is in a garage or basement Hose Kit The Sachvac Digital has the benefit of using the ON/Off Plus hose with a variable speed control on the handle allowing you to reduce or increase the suction power when required Both the handle and the cuff have 360` rotation for easy kink free operation The quality 10 piece kit comes complete with 8 or 10 meter professional hose Combination floor tool Hard Floor brush Dust Brush Telescopic wand Upholstery Tool Tool holder

GBP 727.27

1

Sachvac Digital 2.4 Central Vacuum Unit

Sachvac Digital 2.4 Central Vacuum Unit Product Part Number Sachvac Digital 2.4 Central Vacuum Unit - UD6006/SC/E Sachvac Digital 2.4 Central Vacuum Unit with 8m On-Off Plus Hose Kit - UD6006/35/8-SC Sachvac Digital 2.4 Central Vacuum Unit with 8m On-Off Plus Hose Kit - UD6006/35/10-SC High performance of Airwatt 835, Waterlift 2800, Air flow 294 M3/h Easy to empty large 28 litre container 3 stage filtration Filtration Cyclonic collection (no bags) Easy to clean filter Hepa filter Digital Display panel showing a variety of functions- Box full Service required Filter warning Power on Motor fault Remote Display Panel It is now possible to to view all information provided by the central vacuum with a remote display on the wall of your house - Ideal if your unit is in a garage or basement Hose Kit The Sachvac Digital has the benefit of using the ON/Off Plus hose with a variable speed control on the handle allowing you to reduce or increase the suction power when required Both the handle and the cuff have 360` rotation for easy kink free operation The quality 10 piece kit comes complete with 8 or 10 meter professional hose Combination floor tool Hard Floor brush Dust Brush Telescopic wand Upholstery Tool Tool holder

GBP 901.45

1

Domus HRX-E AURA Heat Recovery Unit

Domus HRXE-AURA-H Opposite Handed - HRXE-AURA-OPH Description The Domus HRXE-AURA-H provides a maximum flow rate of 320m3/hr suitable for a house up to 190 m2 floor area with up to 5 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Domus unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Domus units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Domus units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket AV (anti vibration mounting kit) - HRXE-AURA-AV The optional anti vibration kit can be used for both wall and floor Tank Stand The MVHR unit can be positioned on the optional tank stand using the Anti-vibration tray assembly discarding the angle brackets. (7) Angled Brackets The unit can be installed above the floor on a wall angled bracket (8) Accessories Condensation Drain – 397 Aura Replacement filters SPR428

GBP 1480.66

1

Domus HRXE-ZEUS

Domus HRXE-ZEUS Product Part Number Domus HRXE-ZEUS-H Opposite Handed - HRXE-ZEUS-OPH Description The Domus HRXE-ZEUS-H provides a maximum flow rate of 550m3/hr suitable for a house up to 330 m2 floor area with up to 10 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Domus unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Domus units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Domus units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket AV (anti vibration mounting kit) - HRXE-XEUS-AV The optional anti vibration kit can be used for both wall and floor Tank Stand The MVHR unit can be positioned on the optional tank stand using the Anti-vibration tray assembly discarding the angle brackets. (7) Angled Brackets The unit can be installed above the floor on a wall angled bracket (8) Accessories Condensation Drain – 297 ZEUS Replacement filters SPR459

GBP 2935.30

1

Brand

Merchant

Price (EUR)