Pricemate

Zehnder ComfoAir 200 Luxe Enthalpy

Zehnder ComfoAir 200 Luxe Enthalpy Product Part Number Zehnder ComfoAir 200 R Luxe Enthalpy - 471229955 Description The Zehnder ComfoAir 200 is a heat recovery unit designed to enable better and easier specification of ventilation in new properties due to its versatility. It can be left or right handed in addition to being ceiling or wall mounted. It contains features such as its automatic true summer by-pass, high heat recovery efficiency and upgradable high grade filters providing a comfortable, healthy and energy-efficient indoor climate.

GBP 2131.07

1

Zehnder ComfoAir 200 Luxe Pre Heater

Zehnder ComfoAir 200 Luxe Pre Heater Product Part Number Zehnder ComfoAir 200 VR Luxe (with pre-heater) - 471229815 Description The Zehnder ComfoAir 200 is a heat recovery unit designed to enable better and easier specification of ventilation in new properties due to its versatility. It can be left or right handed in addition to being ceiling or wall mounted. It contains features such as its automatic true summer by-pass, high heat recovery efficiency and upgradable high grade filters providing a comfortable, healthy and energy-efficient indoor climate.

GBP 2472.18

1

Airflow Adroit DV145

Description Airflow Adroit DV145 R- 90001267 / R-EPH- 90001267EPH L- 90001268 / L-EPH – 90001268EPH The Airflow Adroit DV145 is a high-Quality Passive house approved unit suitable for houses of up to 310m2 that is built to the highest standards that include internal Co2 and Humidity sensors plus triple filter filtration Control with this unit via either a smartphone, tablet, or PC., Automatic Demand control via the internal sensors or the optional use of a wall mounted controller or integrate into a home automation or BMS system via the KNX or Modbus connections BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Airflow Adroit DV145 Suitable for floor areas up to 310m2 Delivers an airflow rate of up to 522 m³/hour @ 100 Pa High heat recovery efficiency of up to 92%. Internet control Via Smartphone App or PC Internal humidity sensor for automatic speed control Internal Co2 Sensor for automatic speed control Optional wall controller On demand control via room or duct sensor options BMS connection via MODBUS or KNX (optional) Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Passive House Approved Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional smart frost protection 5-year warranty* (Listed parts Only) 'A' energy rating Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional LCD digital controller with four independent environmental profiles Optional VOC (Volatile Organic Compounds) sensor Auto cut-out switch for extra safety Optional built-in electric post-heater Complies with the NHBC criteria and ERP 2016 standards Integral Humidity and Co2 Sensor The Adroit Unit have internal humidity and Co2 sensors that can provide a superior demand-controlled ventilation solution for your property This is possible, as due to changes to humidity and CO2 levels that occur through changes in occupancy or usage, the ventilation will boost or reduce to match demand, without the need of manual intervention. Total filtration Filtration is very important and the Airflow adroit has a unique and highly effective triple filter design containing two ISO Coarse>75% (G4) grade filters and one ISO ePM1 (F7) filter on the supply and extract air flow path to create an ultra-hygienic environment. This filtration system improves the air quality and provides additional air filtration by preventing particles as small as pollen from entering the premises. This is of particular benefit to those that suffer from asthma or hay fever and other respiratory conditions, this unit also complies to the latest regulations of ISO 16890 CONTROL OPTIONS The DV145 Adroit unit shall be controlled by one of the following: Wall mounted 4 speed manual controllers Adroit digital controller Adroit Cloud through the Internet or local network using laptop, smartphone, tablet, etc. BMS via LON or KNX through a PC or a central control system On-demand ventilation through built-in humidity and CO2 sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Optional ADROIT DIGITAL CONTROLLER The optional digital controller provides significant information to the user regarding the performance of their Adroit system including adjusting the ventilation levels, filter maintenance, separate fan control, faults in the system and commissioning the system and intuitive end user functions The DV145 Adroit is controlled via 4 ventilation profiles controls providing the following features: 4 ventilation profiles,100% adjustable Internet connection available Automatic boost function with delay timer Filter maintenance reminder via counter clock (standard) Heater control for optional post-heater Connection to BMS via LON or KNX Self-diagnostic via fault signal relay On-demand control via humidity, CO2 and VOC sensors Separate fan control for ease of commissioning Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days Indoor temperature control based on

GBP 3768.48

1

Airflow Adroit DV110

Description Airflow Adroit DV110 R- 90001267 / R-EPH- 90001267EPH L- 90001268 / L-EPH – 90001268EPH The Airflow Adroit DV110 is a high-Quality Passive house approved unit suitable for houses of up to 220m2 that is built to the highest standards that include internal Co2 and Humidity sensors plus triple filter filtration Control with this unit via either a smartphone, tablet, or PC, Automatic Demand control via the internal sensors or the optional use of a wall mounted controller or integrate into a home automation or BMS system via the KNX or Modbus connections BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Airflow Adroit DV110 Suitable for floor areas up to 220m2 Delivers an airflow rate of up to 370 m³/hour @ 100 Pa High heat recovery efficiency of up to 91%. Internet control Via Smartphone App or PC Internal humidity sensor for automatic speed control Internal Co2 Sensor for automatic speed control Optional wall controller On demand control via room or duct sensor options BMS connection via MODBUS or KNX (optional) Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Passive House Approved Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional smart frost protection 5-year warranty* (Listed parts Only) 'A' energy rating Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional LCD digital controller with four independent environmental profiles Optional VOC (Volatile Organic Compounds) sensor Auto cut-out switch for extra safety Optional built-in electric post-heater Complies with the NHBC criteria and ERP 2016 standards Integral Humidity and Co2 Sensor The Adroit Unit have internal humidity and Co2 sensors that can provide a superior demand-controlled ventilation solution for your property This is possible, as due to changes to humidity and CO2 levels that occur through changes in occupancy or usage, the ventilation will boost or reduce to match demand, without the need of manual intervention. Total filtration Filtration is very important and the Airflow adroit has a unique and highly effective triple filter design containing two ISO Coarse>75% (G4) grade filters and one ISO ePM1 (F7) filter on the supply and extract air flow path to create an ultra-hygienic environment. This filtration system improves the air quality and provides additional air filtration by preventing particles as small as pollen from entering the premises. This is of particular benefit to those that suffer from asthma or hay fever and other respiratory conditions, this unit also complies to the latest regulations of ISO 16890 CONTROL OPTIONS The DV110 Adroit unit shall be controlled by one of the following: Wall mounted 4 speed manual controllers Adroit digital controller Adroit Cloud through the Internet or local network using laptop, smartphone, tablet, etc. BMS via LON or KNX through a PC or a central control system On-demand ventilation through built-in humidity and CO2 sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Optional ADROIT DIGITAL CONTROLLER The optional digital controller provides significant information to the user regarding the performance of their Adroit system including adjusting the ventilation levels, filter maintenance, separate fan control, faults in the system and commissioning the system and intuitive end user functions The DV110 Adroit is controlled via 4 ventilation profiles controls providing the following features: 4 ventilation profiles,100% adjustable Internet connection available Automatic boost function with delay timer Filter maintenance reminder via counter clock (standard) Heater control for optional post-heater Connection to BMS via LON or KNX Self-diagnostic via fault signal relay On-demand control via humidity, CO2 and VOC sensors Separate fan control for ease of commissioning Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days Indoor temperature control based on

GBP 3029.28

1

Airflow Adroit DV96

Description Airflow Adroit DV96 R- 900001265 / R-EPH-900001265EPH L- 900001266 / L-EPH -90001266EPH The Airflow Adroit DV96 is a high-Quality Passive house approved unit suitable for houses of up to 170m2 that is built to the highest standards that include internal Co2 and Humidity sensors plus triple filter filtration Control with this unit via either a smartphone, tablet, or PC., Automatic Demand control via the internal sensors or the optional use of a wall mounted controller or integrate into a home automation or BMS system via the KNX or Modbus connections BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Airflow Adroit DV96 Suitable for floor areas up to 170m2 Delivers an airflow rate of up to 288 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internet control Via Smartphone App or PC Internal humidity sensor for automatic speed control Internal Co2 Sensor for automatic speed control Optional wall controller On demand control via room or duct sensor options BMS connection via MODBUS or KNX (optional) Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Passive House Approved Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional smart frost protection 5-year warranty* (Listed parts Only) 'A' energy rating Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional LCD digital controller with four independent environmental profiles Optional VOC (Volatile Organic Compounds) sensor Auto cut-out switch for extra safety Optional built-in electric post-heater Complies with the NHBC criteria and ERP 2016 standards Integral Humidity and Co2 Sensor The Adroit Unit have internal humidity and Co2 sensors that can provide a superior demand-controlled ventilation solution for your property This is possible, as due to changes to humidity and CO2 levels that occur through changes in occupancy or usage, the ventilation will boost or reduce to match demand, without the need of manual intervention. Total filtration Filtration is very important and the Airflow adroit has a unique and highly effective triple filter design containing two ISO Coarse>75% (G4) grade filters and one ISO ePM1 (F7) filter on the supply and extract air flow path to create an ultra-hygienic environment. This filtration system improves the air quality and provides additional air filtration by preventing particles as small as pollen from entering the premises. This is of particular benefit to those that suffer from asthma or hay fever and other respiratory conditions, this unit also complies to the latest regulations of ISO 16890 CONTROL OPTIONS The DV96 Adroit unit shall be controlled by one of the following: Wall mounted 4 speed manual controllers Adroit digital controller Adroit Cloud through the Internet or local network using laptop, smartphone, tablet, etc. BMS via LON or KNX through a PC or a central control system On-demand ventilation through built-in humidity and CO2 sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Optional ADROIT DIGITAL CONTROLLER The optional digital controller provides significant information to the user regarding the performance of their Adroit system including adjusting the ventilation levels, filter maintenance, separate fan control, faults in the system and commissioning the system and intuitive end user functions The DV96 Adroit is controlled via 4 ventilation profiles controls providing the following features: 4 ventilation profiles,100% adjustable Internet connection available Automatic boost function with delay timer Filter maintenance reminder via counter clock (standard) Heater control for optional post-heater Connection to BMS via LON or KNX Self-diagnostic via fault signal relay On-demand control via humidity, CO2 and VOC sensors Separate fan control for ease of commissioning Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days Indoor temperature control based on extract air

GBP 2881.43

1

Airflow Adroit DV245 Heat Recovery Unit

Description Airflow Adroit DV245 R- 90001271 / R-EPH- 90001271EPH L- 90001272 / L-EPH – 90001272EPH The Airflow Adroit DV245 is a high-Quality Passive house approved unit suitable for houses of up to 555m2 that is built to the highest standards that include internal Co2 and Humidity sensors plus triple filter filtration Control with this unit via either a smartphone, tablet, or PC., Automatic Demand control via the internal sensors or the optional use of a wall mounted controller or integrate into a home automation or BMS system via the KNX or Modbus connections BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Airflow Adroit DV110 Suitable for floor areas up to 555m2 Delivers an airflow rate of up to 929 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internet control Via Smartphone App or PC Internal humidity sensor for automatic speed control Internal Co2 Sensor for automatic speed control Optional wall controller On demand control via room or duct sensor options BMS connection via MODBUS or KNX (optional) Full 100% automatic summer bypass to supply unheated air in the summer Passive House Approved Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional smart frost protection 5-year warranty* (Listed parts Only) 'A' energy rating Triple filter design with 2 x G4 & 1 x F7 pollen filter Galvanised steel, double-skin casing with 20 mm insulation Optional LCD digital controller with four independent environmental profiles Optional VOC (Volatile Organic Compounds) sensor Auto cut-out switch for extra safety Optional built-in electric post-heater Complies with the NHBC criteria and ERP 2016 standards Integral Humidity and Co2 Sensor The Adroit Unit have internal humidity and Co2 sensors that can provide a superior demand-controlled ventilation solution for your property This is possible, as due to changes to humidity and CO2 levels that occur through changes in occupancy or usage, the ventilation will boost or reduce to match demand, without the need of manual intervention. Total filtration Filtration is very important and the Airflow adroit has a unique and highly effective triple filter design containing two ISO Coarse>75% (G4) grade filters and one ISO ePM1 (F7) filter on the supply and extract air flow path to create an ultra-hygienic environment. This filtration system improves the air quality and provides additional air filtration by preventing particles as small as pollen from entering the premises. This is of particular benefit to those that suffer from asthma or hay fever and other respiratory conditions, this unit also complies to the latest regulations of ISO 16890 CONTROL OPTIONS The DV245 Adroit unit shall be controlled by one of the following: Wall mounted 4 speed manual controllers Adroit digital controller Adroit Cloud through the Internet or local network using laptop, smartphone, tablet, etc. BMS via LON or KNX through a PC or a central control system On-demand ventilation through built-in humidity and CO2 sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Optional ADROIT DIGITAL CONTROLLER The optional digital controller provides significant information to the user regarding the performance of their Adroit system including adjusting the ventilation levels, filter maintenance, separate fan control, faults in the system and commissioning the system and intuitive end user functions The DV245 Adroit is controlled via 4 ventilation profiles controls providing the following features: 4 ventilation profiles,100% adjustable Internet connection available Automatic boost function with delay timer Filter maintenance reminder via counter clock (standard) Heater control for optional post-heater Connection to BMS via LON or KNX Self-diagnostic via fault signal relay On-demand control via humidity, CO2 and VOC sensors Separate fan control for ease of commissioning Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days Indoor temperature control based on extract air temperature or supply air temperature

GBP 9150.53

1

Airflow Adroit DV80 Left Hand Heat Recovery Unit

Airflow Adroit DV80 Left Hand Heat Recovery Unit Showroom Clearance Sale* For use in dwellings up to 120 m2 Up to 90% thermal efficiency and low SFP ‘A’ energy rating Internet control by smart phone, tablet, or PC Triple filter design with F7 pollen filter Automatic, 100% summer by-pass Integral Humidity Sensor Galvanised steel, double-skin casing BMS (Modbus / KNX) connection Optional LCD digital controller with four independent environmental profiles Optional manual four speed controller Auto cut-out switch for extra safety Optional built-in Electric Post-heater Optional smart frost protection Complies with Building Regulations and Passive House certified *Units are from a showroom clearance. Units are new and unused but may have marks or cosmetic damage and may not always be in original packaging With its powerful air volume capacity and high thermal efficiency the DV80 Adroit is suitable for smaller family homes and flats. Control your indoor air environment at home or on the go via the Adroit ‘Cloud’ internet control by smart phone, tablet, or PC. With the triple filter design with an F7 pollen filter, the DV80 Adroit provides additional protection against invisible, harmful particles and creates an ultra-hygienic environment. The automatic, 100% summer by-pass facility isolates the heat recovery function and helps to effectively maintain a temperate indoor air climate during the summer months. The unit includes an easily removable, plastic heat exchanger and may be equipped with a range of optional accessories for higher performance. Benefits of working with BPC Ventilation Number 1 leading MVHR and ventilation system specialists Large range of systems for domestic and commercial applications Authorised Airflow distributors In-house design service Full technical support 1000s of products in stock in our own warehouse Large showroom with working units on display Installer network throughout the UK and Ireland All systems comply to all the

GBP 1152.00

1

Airflow Adroit DV80 EPH Left Hand Heat Recovery Unit

Airflow Adroit DV80 Left Hand Heat Recovery Unit Showroom Clearance Sale* Post Heater For use in dwellings up to 120 m2 Up to 90% thermal efficiency and low SFP ‘A’ energy rating Internet control by smart phone, tablet, or PC Triple filter design with F7 pollen filter Automatic, 100% summer by-pass Integral Humidity Sensor Galvanised steel, double-skin casing BMS (Modbus / KNX) connection Optional LCD digital controller with four independent environmental profiles Optional manual four speed controller Auto cut-out switch for extra safety Optional built-in Electric Post-heater Optional smart frost protection Complies with Building Regulations and Passive House certified *Units are from a showroom clearance. Units are new and unused but may have marks or cosmetic damage and may not always be in original packaging With its powerful air volume capacity and high thermal efficiency the DV80 Adroit is suitable for smaller family homes and flats. Control your indoor air environment at home or on the go via the Adroit ‘Cloud’ internet control by smart phone, tablet, or PC. With the triple filter design with an F7 pollen filter, the DV80 Adroit provides additional protection against invisible, harmful particles and creates an ultra-hygienic environment. The automatic, 100% summer by-pass facility isolates the heat recovery function and helps to effectively maintain a temperate indoor air climate during the summer months. The unit includes an easily removable, plastic heat exchanger and may be equipped with a range of optional accessories for higher performance. Benefits of working with BPC Ventilation Number 1 leading MVHR and ventilation system specialists Large range of systems for domestic and commercial applications Authorised Airflow distributors In-house design service Full technical support 1000s of products in stock in our own warehouse Large showroom with working units on display Installer network throughout the UK and Ireland

GBP 1248.00

1

Vent Axia Sentinel Kinetic High Flow Heat Recovery System

Vent Axia Sentinel Kinetic High Flow Heat Recovery Unit Product Part Number Vent Axia Kinetic High Flow Right Handed Heat Recovery Unit - 408449 Vent Axia Kinetic High Flow Left Handed Heat Recovery Unit - 408451 Description The UK’s top selling MVHR unit for houses with a max floor area of 345m2 due to the combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features – Vent Axia High flow Suitable for floor areas up to 345m2 Delivers an airflow rate of up to 575 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 34KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 345m2 With a high performance of 575 m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection

GBP 2208.00

1

Vent Axia Kinetic FH Heat Recovery Unit

Vent Axia Sentinel Kinetic FH Heat Recovery Unit Product Part Number Vent Axia Kinetic F Right Handed - 408167 Vent Axia Kinetic F Left Handed - 408169 Description The UK’s top selling MVHR unit for houses with a max floor area of 150m2 due to the combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features – Vent Axia FH Suitable for floor areas up to 185 m2 Delivers an airflow rate of up to 310 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 18KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 185m2 With a high performance of 310 m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection effective to -20°C External Control Components Integral BMS input/output interfaces – 0-10V

GBP 1547.52

1

Vent Axia plus B

Vent Axia plus B Product Part Number Vent Axia Plus B Right Handed Unit - 443028 Vent Axia Plus B Left Handed Unit - 443028L(Special order only) Key Features – Vent Axia Plus B Suitable for floor areas up to 250m2 Delivers an airflow rate of up to 425 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 24KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 250m2 With a high performance of 425 m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Optional 180mm/200mm spigots can simplify connection in commercial installations where larger diameter duct work has been used. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection effective to -20°C External Control Components Integral BMS input/output interfaces – 0-10V proportional speed adjustment Volt free contacts 24V sensor supply Integral on/off or trickle boost function from remote switch, e.g. PIR occupancy detector Switched Live input with adjustable ‘delay-on’ feature Fan failure or component failure indicated via individual fault code display Running time counter

GBP 1660.80

1

Vent Axia Sentinel Kinetic BH Heat Recovery Unit

Vent Axia Sentinel Kinetic BH Heat Recovery Unit Product Part Number Vent Axia Kinetic BH Right Handed Unit - 443319 Vent Axia Kinetic BH Left Handed Unit - 443319L Description The UK’s top selling MVHR unit for houses with a max floor area of 150m2 due to the combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features – Vent Axia BH Suitable for floor areas up to 150m2 Delivers an airflow rate of up to 245 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 15KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 150m2 With a high performance of 245m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection effective to -20°C External Control Components Integral BMS input/output interfaces – 0-10V proportional speed adjustment Volt free contacts 24V

GBP 1209.60

1

Zehnder ComfoAir Flex 250 MVHR

Zehnder ComfoAir Flex 250 MVHR Product Part Number Zehnder ComfoAir Flex 250 - 471234220 Zehnder ComfoAir Flex 250 with pre-heater - 471234230 Decription Zehnder ComfoAir Flex is a ventilation unit that has been specially developed for apartments and smaller homes, where living space is a valuable resource and needs to be wisely planned. The compact design fits seamlessly in suspended ceilings without sacrificing outstanding performance. Zehnder ComfoAir Flex is equipped with the quietest fan technology on the market and reduces noise levels to a minimum even during full operation. A custom-made heat exchanger and scroll housing ensure a high level of heat recovery while keeping energy consumption low and efficient. ComfoAir Flex 250 The Zehnder ComfoAir Flex 250 has been developed as an ideal solution for apartments and small homes whereefficient use of space is important. Installation within a suspended ceiling is possible, even in small spaces, thanks toits compact design with minimal dimensions and rotatable spigots. It contains features such as its integrated Wi-Ficonnection with app control, automatic true summer by-pass, high heat recovery efficiency and upgradable high gradefilters providing a comfortable, healthy and energy-efficient indoor climate. Key Benefits Wi-Fi enabled as standard for use with the ComfoControl app for IOS or Android. Left or right hand configuration through software alone, no mechanical alteration required. 100% full and filtered modulating summer bypass. Rotatable spigots for flexibility on duct connections. Commissioning wizard for a quick and simple set-up process. Flow control to maintain commissioned flow rates. Adaptive comfort technology. Automatic passive temperature boost in summer. Humidity boost continuously monitors the humidity level within the home and looks for a man-made spike before boosting the unit, irrespective of distance or dilution. Double dry siphon included to enable an easier installation. Tool free filter access. Volt free contact boost capability. 0-10V BMS input. Fire shutdown contact. Remote access. Internal pre-heater option. ISO Coarse (G4), ISO ePM10 (M5) and ISO ePM1 (F7) filter options. Passive House certified.

GBP 2515.26

1

Vent Axia Lo-Carbon Sentinel Multivent

Vent Axia Lo-Carbon Sentinel Multivent The top of the range Sentinel Multivent continuous mechanical extract ventilation range is designed for the simultaneous extraction of up to several bathrooms/ Wet Rooms to a centrally positioned unit normally installed in the attic space Complete DIY Kit of a Vent Axia multiple room extraction unit with in insulated Flexible Ducting and fittings suitable for extraction of 4 separate areas Our Comprehensive DIY Kits have everything you should require to install the system to building control regulations Please note - You can purchase the MEV unit with or without the ductwork on this listing Key Unit Features Integral LCD display allows the installer to select appropriate low, normal and boost speeds to meet demand Energy efficient EC/DC motors - 1/3 less energy lost to heat than a conventional AC motor Ultra-quiet - acoustically lined for low noise levels Manual and automatic control options Integral adjustable overrun timer and delay on timer Option of wall, ceiling, and loft mounting Fully serviceable unit with all parts accessible PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels Technical Features Max Airflow of 450m3/h Best in class Specific Fan Power (SFP) as low as 0.16 wls Dimensions (mm) 340 long x 310 wide x 249 high Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Demand Control - enables precise ventilation rate, is set in 1% increments based on property size Plug-n-Play automatic sensor detection Switched live and SELV connections Dry Out setting – Option set at installation, Sentinel Multivent will run on boost for 1 week to assist in removing moisture Optional Wireless Control – up to 4 controllers on any one system Recognised in SAP Appendix Q Complies with Building ADF (System 3) Energy efficient EC/DC motors - 1/3 less energy lost to heat than a conventional AC motor 2-year standard or optional 5-year parts warranty Controllability Demand Control - enables precise ventilation rate, is set in 1% increments based on property size

GBP 487.87

1

Zehnder ComfoAir Flex 350 MVHR with pre-heater

Zehnder ComfoAir Flex 350 MVHR Product Part Number Zehnder ComfoAir Flex 350 with pre-heater - 471234260 Decription Zehnder ComfoAir Flex is a ventilation unit that has been specially developed for apartments and smaller homes, where living space is a valuable resource and needs to be wisely planned. The compact design fits seamlessly in suspended ceilings without sacrificing outstanding performance. Zehnder ComfoAir Flex is equipped with the quietest fan technology on the market and reduces noise levels to a minimum even during full operation. A custom-made heat exchanger and scroll housing ensure a high level of heat recovery while keeping energy consumption low and efficient. ComfoAir Flex 350 The Zehnder ComfoAir Flex 350 has been developed as an ideal solution for apartments and small homes whereefficient use of space is important. Installation within a suspended ceiling is possible, even in small spaces, thanks toits compact design with minimal dimensions and rotatable spigots. It contains features such as its integrated Wi-Ficonnection with app control, automatic true summer by-pass, high heat recovery efficiency and upgradable high gradefilters providing a comfortable, healthy and energy-efficient indoor climate. Key Benefits Wi-Fi enabled as standard for use with the ComfoControl app for IOS or Android. Left or right hand configuration through software alone, no mechanical alteration required. 100% full and filtered modulating summer bypass. Rotatable spigots for flexibility on duct connections. Commissioning wizard for a quick and simple set-up process. Flow control to maintain commissioned flow rates. Adaptive comfort technology. Automatic passive temperature boost in summer. Humidity boost continuously monitors the humidity level within the home and looks for a man-made spike before boosting the unit, irrespective of distance or dilution. Double dry siphon included to enable an easier installation. Tool free filter access. Volt free contact boost capability. 0-10V BMS input. Fire shutdown contact. Remote access. Internal pre-heater option. ISO Coarse (G4), ISO ePM10 (M5) and ISO ePM1 (F7) filter options. Passive House certified.

GBP 2928.16

1

Zehnder ComfoAir Flex 350 MVHR

Zehnder ComfoAir Flex 350 MVHR Product Part Number Zehnder ComfoAir Flex 350 - 471234250 Decription Zehnder ComfoAir Flex is a ventilation unit that has been specially developed for apartments and smaller homes, where living space is a valuable resource and needs to be wisely planned. The compact design fits seamlessly in suspended ceilings without sacrificing outstanding performance. Zehnder ComfoAir Flex is equipped with the quietest fan technology on the market and reduces noise levels to a minimum even during full operation. A custom-made heat exchanger and scroll housing ensure a high level of heat recovery while keeping energy consumption low and efficient. ComfoAir Flex 350 The Zehnder ComfoAir Flex 350 has been developed as an ideal solution for apartments and small homes whereefficient use of space is important. Installation within a suspended ceiling is possible, even in small spaces, thanks toits compact design with minimal dimensions and rotatable spigots. It contains features such as its integrated Wi-Ficonnection with app control, automatic true summer by-pass, high heat recovery efficiency and upgradable high gradefilters providing a comfortable, healthy and energy-efficient indoor climate. Key Benefits Wi-Fi enabled as standard for use with the ComfoControl app for IOS or Android. Left or right hand configuration through software alone, no mechanical alteration required. 100% full and filtered modulating summer bypass. Rotatable spigots for flexibility on duct connections. Commissioning wizard for a quick and simple set-up process. Flow control to maintain commissioned flow rates. Adaptive comfort technology. Automatic passive temperature boost in summer. Humidity boost continuously monitors the humidity level within the home and looks for a man-made spike before boosting the unit, irrespective of distance or dilution. Double dry siphon included to enable an easier installation. Tool free filter access. Volt free contact boost capability. 0-10V BMS input. Fire shutdown contact. Remote access. Internal pre-heater option. ISO Coarse (G4), ISO ePM10 (M5) and ISO ePM1 (F7) filter options. Passive House certified.

GBP 2650.86

1

Vent Axia Sentinel Multivent H Unit

Vent Axia Sentinel Multivent H Unit Product Part Number Vent Axia Sentinel Multivent with Humidity Sensor - 445655 Key Features Internal Humidity sensor Integral LCD display allows the installer to select appropriate low, normal and boost speeds to meet demand Ultra-quiet - acoustically lined for low noise levels Demand Control - enables precise ventilation rate, is set in 1% increments based on property size Manual and automatic control options Integral adjustable overrun timer and delay on timer Plug-n-Play automatic sensor detection Switched live and SELV connections PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels Technical Features Max Airflow of 450m3/h Energy efficient EC/DC motors - 1/3 less energy lost to heat than a conventional AC motor Best in class Specific Fan Power (SFP) as low as 0.16 wls Dimensions (mm) height 310mm, width 360mm, depth 260mm Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Option of wall, ceiling, and loft mounting Fully serviceable unit with all parts accessible Dry Out setting – Option set at installation, Sentinel Multivent will run on boost for 1 week to assist in removing moisture Recognised in SAP Appendix Q Complies with Building ADF (System 3) 2-year standard or optional 5-year parts warranty Humidity Sensor The integral humidity sensor (Sentinel Multivent H) increases fan speed in proportion to relative humidity levels, saving energy and reducing noise The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room Night-time relative humidity increment setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Controllability Demand Control - enables precise ventilation rate, is set in 1% increments based on property size Integral LCD display allows the installer to select appropriate low, normal and boost speeds to

GBP 505.80

1

Panasonic Smart Wall Mounted Fan Coil

Panasonic Smart Wall Mounted Fan Coil Product Part Number Panasonic 200 Smart wall mounted fan coils - PAW-AAIR-200-2 Panasonic 700 Smart wall mounted fan coils - PAW-AAIR-700-2 Panasonic 900 Smart wall mounted fan coils - PAW-AAIR-900-2 Description Bring year-round heating and cooling to any room with the Panasonic Smart fan coil. The Smart fan coils look like a stylish wall radiator but can supply superior heating and cooling from a low temperature heat pump and be controlled by a built-in touch screen thermostat. Specially designed for use with our range of Panasonic heating and cooling air to water heat pumps to provide high efficiency climate control. With automatic control of passive heating or the use of up to 4 fan speeds a quiet but effective enables high airflows to be achieved with low pressure loss and low noise levels. The slimline design of less than 13cm and the choice of 3 models makes the smart fan coils perfectly designed to adapt to any installation including residential applications, hotels, shops, restaurants, and offices. Dimensions Model Height Width Depth Weight 200-2 735mm 579mm 129mm 17kg 700-2 935mm 579mm 129mm 20kg 900-2 1135mm 579mm 129mm 23kg

GBP 886.98

1

Vent-Axia Sentinel Econiq M - 499632

Vent-Axia Sentinel Econiq M Product Part Number 499632 Description The Sentinel Econiq are Latest flagship and highest specification MVHR units from Vent Axia Vent Axia are the largest manufacture of heat recovery units in the UK and the Econiq L is suitable for houses with a max floor area of 270m2 With a combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options including smartphone control make this unit top of the list for all types of homes BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features Suitable for floor areas up to 270m2 Delivers an airflow rate of up to 450 m³/hour @ 150 Pa High heat recovery efficiency of up to 93%. Low weight of only 55KG Digital controller on unit with optional wall mounting kit Easy Smartphone App Commissioning Sentinel-X wireless controls platform Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Approved Document F aligned commissioning wizard Internal humidity sensor for automatic speed control Ultra Quiet Unit mounted control panel Airtight Housing Latest highly efficient soft start EC3 Motors Up to 93% heat recovery Horizontal or vertical duct connections Sound levels as low as 15.5 dB(A) Left and Right configuration via control panel Manufactured in the UK PVC Counterflow heat recovery core 2 x G3 filters and Optional ePM10 (M5) and ePM2.5 (F7) filtration Multiple Control options including 0 to100% fan speed settings, Humidity, BMS, timer delay, 0-10v & 240v boost options Filter check RF858 connectivity, 802.11b/g/n Wi-Fi and Bluetooth low energy 4.2 Optional Wall mounting kit for controller Optional HMI Kit Optional 0-10v, Co2, Temp, Humidity wired room sensors Optional wireless Temp, Humidity and 4 speed switches Optional 240v Co2, Temp, Humidity, PIR and 4 speed switches Optional AIM Alarm Interface Optional Volt free expansion board Optional 0-10v expansion board Optional Purge van integration UK manufactured MVHR unit with 5 Year parts warranty through BPC High Performance The Sentinel Econiq M benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 270m2 With a high performance of 450 m3/hr at 150Pa while still achieving almost 93% heat recovery. The fully automatic capability of the Econiq range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 4 x Integral infinitely variable fan speed control on supply and extract there is also an optional kit allowing you to remove the controller from the unit and wall mount in your chosen location There is also a pin number facility to prevent accidental resetting of commissioning settings App Control The Vent-Axia Connect smartphone application allows full control with a multitude of functions from automated to fully adjustable from the comfort of the sofa on iOS and Android smartphones Orientation This unit can be electronically changed from right to left hand orientation Spigot Options The 200mm Spigots may be re-positioned from a vertical to a horizontal connection or a combination of vertical and horizontal connection. 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Low Noise Levels The Lo-Carbon Sentinel Econiq is one of the quietest systems on the market, with a noise level as low

GBP 2691.84

1

Vent-Axia Sentinel Econiq L - 499641

Vent-Axia Sentinel Econiq L Product Part Number 499641 Description The Sentinel Econiq are Latest flagship and highest specification MVHR units from Vent Axia Vent Axia are the largest manufacture of heat recovery units in the UK and the Econiq L is suitable for houses with a max floor area of 360m2 With a combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options including smartphone control make this unit top of the list for all types of homes BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features Suitable for floor areas up to 360m2 Delivers an airflow rate of up to 600 m³/hour @ 150 Pa High heat recovery efficiency of up to 93%. Low weight of only 55KG Digital controller on unit with optional wall mounting kit Easy Smartphone App Commissioning Sentinel-X wireless controls platform Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Approved Document F aligned commissioning wizard Internal humidity sensor for automatic speed control Ultra Quiet Unit mounted control panel Airtight Housing Latest highly efficient soft start EC3 Motors Up to 93% heat recovery Horizontal or vertical duct connections Sound levels as low as 15.5 dB(A) Left and Right configuration via control panel Manufactured in the UK PVC Counterflow heat recovery core 2 x G3 filters and Optional ePM10 (M5) and ePM2.5 (F7) filtration Multiple Control options including 0 to100% fan speed settings, Humidity, BMS, timer delay, 0-10v & 240v boost options Filter check RF858 connectivity, 802.11b/g/n Wi-Fi and Bluetooth low energy 4.2 Optional comfort cooling Optional Wall mounting kit for controller Optional HMI Kit Optional 0-10v, Co2, Temp, Humidity wired room sensors Optional wireless Temp, Humidity and 4 speed switches Optional 240v Co2, Temp, Humidity, PIR and 4 speed switches Optional AIM Alarm Interface Optional Volt free expansion board Optional 0-10v expansion board Optional Purge fan integration UK manufactured MVHR unit with 5 Year parts warranty through BPC High Performance The Sentinel Econiq S benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 360m2 With a high performance of 600 m3/hr at 150Pa while still achieving almost 93% heat recovery. The fully automatic capability of the Econiq range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 4 x Integral infinitely variable fan speed control on supply and extract there is also an optional kit allowing you to remove the controller from the unit and wall mount in your chosen location There is also a pin number facility to prevent accidental resetting of commissioning settings App Control The Vent-Axia Connect smartphone application allows full control with a multitude of functions from automated to fully adjustable from the comfort of the sofa on iOS and Android smartphones Orientation This unit can be electronically changed from right to left hand orientation Spigot Options The 200mm Spigots may be re-positioned from a vertical to a horizontal connection or a combination of vertical and horizontal connection. 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Low Noise Levels The Lo-Carbon Sentinel Econiq is one of the quietest systems on the

GBP 3171.84

1

Vent-Axia Sentinel Econiq S - 499883

Vent-Axia Sentinel Econiq S Product Part Number 499883 Description The Sentinel Econiq are Latest flagship and highest specification MVHR units from Vent Axia Vent Axia are the largest manufacture of heat recovery units in the UK and the Econiq S is suitable for houses with a max floor area of 210m2 With a combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options including smartphone control make this unit top of the list for all types of homes BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features Suitable for floor areas up to 210m2 Delivers an airflow rate of up to 350 m³/hour @ 150 Pa High heat recovery efficiency of up to 93%. Low weight of only 32KG Digital controller on unit with optional wall mounting kit Easy Smartphone App Commissioning Sentinel-X wireless controls platform Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Approved Document F aligned commissioning wizard Internal humidity sensor for automatic speed control Ultra Quiet Unit mounted control panel Airtight Housing Latest highly efficient soft start EC3 Motors Up to 93% heat recovery Horizontal or vertical duct connections Sound levels as low as 15.5 dB(A) Left and Right configuration via control panel Manufactured in the UK PVC Counterflow heat recovery core 2 x G3 filters and Optional ePM10 (M5) and ePM2.5 (F7) filtration Multiple Control options including 0 to100% fan speed settings, Humidity, BMS, timer delay, 0-10v & 240v boost options Filter check RF858 connectivity, 802.11b/g/n Wi-Fi and Bluetooth low energy 4.2 Optional Wall mounting kit for controller Optional Acoustic enclosure and Top Box (S only) Optional HMI Kit Optional 0-10v, Co2, Temp, Humidity wired room sensors Optional wireless Temp, Humidity and 4 speed switches Optional 240v Co2, Temp, Humidity, PIR and 4 speed switches Optional AIM Alarm Interface Optional Volt free expansion board Optional 0-10v expansion board Optional Purge van integration UK manufactured MVHR unit with 5 Year parts warranty through BPC High Performance The Sentinel Econiq S benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 220m2 With a high performance of 350 m3/hr at 150Pa while still achieving almost 93% heat recovery. The fully automatic capability of the Econiq range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 4 x Integral infinitely variable fan speed control on supply and extract there is also an optional kit allowing you to remove the controller from the unit and wall mount in your chosen location There is also a pin number facility to prevent accidental resetting of commissioning settings App Control The Vent-Axia Connect smartphone application allows full control with a multitude of functions from automated to fully adjustable from the comfort of the sofa on iOS and Android smartphones Orientation This unit can be electronically changed from right to left hand orientation Spigot Options The 200mm Spigots may be re-positioned from a vertical to a horizontal connection or a combination of vertical and horizontal connection. 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Low Noise Levels The Lo-Carbon Sentinel Econiq is one of the

GBP 1902.72

1

Mitsubishi LGH200RVXT3-E (250x750mm Spigot)

Mitsubishi LGH200RVXT3-E (250x750mm Spigot) Product Part Number LGH200RVXT3-E Description The Commercial Lossnay (LGH) Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into commercial buildings, whilst simultaneously extracting stale air. The RVXT3 units offer a significantly reduced height whilst maintaining a large airflow, allowing easy installation in ceiling voids. Key Features Power Supply: 3 Phase Mitsubishi Electric pioneered heat exchanger enables maximised latent heat exchange, resulting in cost and carbon savings Low unit height (500mm) and lightweight structure, ideal for ceiling installation Four commissionable fan speeds, settable between 25-100%, with independent supply and return fan control offering low running costs and easier compliance to Part L Optional Mitsubishi Electric energy saving CO2 sensors allow automatic incremental fan control for a healthy indoor environment; sensors powered by Lossnay unit No condensate drain required allowing for easy design and installation Dual-barrier coated fans, prevents dust and grease accumulation, ensuring long-term efficient fan operation Constant pressure control available with 0-10V pressure transducer (field supplied), for variable airflow requirements across multiple zones Compatible with Mr Slim and City Multi air conditioning systems for a complete and highly effective system operation Duct handing selectable via dipswitch, for easy and flexible installation Optional high efficiency filters available Sound Power Octave Levels Dimensions

GBP 5089.15

1

Mitsubishi LGH160RVXT3-E (250x750mm Spigot)

Mitsubishi LGH160RVXT3-E (250x750mm Spigot) Product Part Number LGH160RVXT3-E Description The Commercial Lossnay (LGH) Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into commercial buildings, whilst simultaneously extracting stale air. The RVXT3 units offer a significantly reduced height whilst maintaining a large airflow, allowing easy installation in ceiling voids. Key Features Power Supply: 3 Phase Mitsubishi Electric pioneered heat exchanger enables maximised latent heat exchange, resulting in cost and carbon savings Low unit height (500mm) and lightweight structure, ideal for ceiling installation Four commissionable fan speeds, settable between 25-100%, with independent supply and return fan control offering low running costs and easier compliance to Part L Optional Mitsubishi Electric energy saving CO2 sensors allow automatic incremental fan control for a healthy indoor environment; sensors powered by Lossnay unit No condensate drain required allowing for easy design and installation Dual-barrier coated fans, prevents dust and grease accumulation, ensuring long-term efficient fan operation Constant pressure control available with 0-10V pressure transducer (field supplied), for variable airflow requirements across multiple zones Compatible with Mr Slim and City Multi air conditioning systems for a complete and highly effective system operation Duct handing selectable via dipswitch, for easy and flexible installation Optional high efficiency filters available Sound Power Octave Levels Dimensions

GBP 3924.43

1

Mitsubishi LGH250RVXT3-E (250x750mm Spigot)

Mitsubishi LGH250RVXT3-E (250x750mm Spigot) Product Part Number LGH250RVXT3-E Description The Commercial Lossnay (LGH) Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into commercial buildings, whilst simultaneously extracting stale air. The RVXT3 units offer a significantly reduced height whilst maintaining a large airflow, allowing easy installation in ceiling voids. Key Features Power Supply: 3 Phase Mitsubishi Electric pioneered heat exchanger enables maximised latent heat exchange, resulting in cost and carbon savings Low unit height (500mm) and lightweight structure, ideal for ceiling installation Four commissionable fan speeds, settable between 25-100%, with independent supply and return fan control offering low running costs and easier compliance to Part L Optional Mitsubishi Electric energy saving CO2 sensors allow automatic incremental fan control for a healthy indoor environment; sensors powered by Lossnay unit No condensate drain required allowing for easy design and installation Dual-barrier coated fans, prevents dust and grease accumulation, ensuring long-term efficient fan operation Constant pressure control available with 0-10V pressure transducer (field supplied), for variable airflow requirements across multiple zones Compatible with Mr Slim and City Multi air conditioning systems for a complete and highly effective system operation Duct handing selectable via dipswitch, for easy and flexible installation Optional high efficiency filters available Sound Power Octave Levels Dimensions

GBP 6083.10

1

Vortice HR 350 Avel Heat Recovery Unit

Vortice HR 350 Avel Heat Recovery Unit The Vortice HR 350 Avel has been developed with the latest technology with contoured internal mouldings that lower air resistance providing a quieter and more efficient heat recovery system designed to provide essential ventilation and to save you money through its intelligent heat recovery facility, this system provides a cost-effective and environmentally friendly option for residential applications. MAIN FEATURES: Digital controller panel Supply and extract air ventilation with heat recovery EPP construction Boost operation with timer Automatic frost protection On demand control via room or duct sensor options Complies with the NHBC criteria and ErP 2016 standards SAP Appendix Q eligible. Meets building regulations Optional Co2 or Humidity sensors Optional electric post heater Filtration The Fresh air is 100% fully filtered with two quality filters even in bypass mode which helps to maintain good indoor air quality within the home Controllability Supplied with a wired digital controller panel with a range of humidity, Co2 and timer sensors available at extra cost Features Suitable for houses or apartments up to 200 m2. / extract from a Kitchen and 5 wet room Construction The enclosure is constructed with the latest EPP with contoured internal mouldings to IPX2 ratings with a removable hinged door for easy maintenance Motors The supply and extract air is provided with 2 EC (brushless) motors with shaft turning in ball bearings, each coupled to a backward curved centrifugal impeller; 3 speeds, selectable independently at the moment of installation.

GBP 3551.03

1

Brand

Merchant

Price (EUR)