12 results (0,15512 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Domus AQH200-B Horizontal 204-60 MVHR Unit

Domus AQH200-B Horizontal 204-60 MVHR Unit

Domus AQH200-B Horizontal 204-60 MVHR Unit Product Part Number Domus AQH200-B Horizontal 204-60 MVHR unit - AQH200-B Description The Domus HRX-AQH200-B is a compact and intelligent ceiling mounted unit and with a height of only 200mm it is suitable for narrow service voids The Controllability is provided by an advanced Bluebrain digital controller and optional room sensors or switches We also advise an optional boost switch should be used local to the wet rooms BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 2-year parts warranty* and lifetime technical support on our top-quality systems Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) Integral Humidity Sensor The integral humidity sensor incorporated within the extract fan chamber will automatically boost both the extract and supply fan, to the commissioned boost speed, when the humidity level exceeds that set by the Bluebrain Controller. CONTROL OPTIONS The Domus units are controlled by one of the following: Bluebrain controller Humidity sensor Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Bluebrain Control Panel  The controller comes complete with commissioning and end user functions. 75˝ LCD display Current fan speed Current indoor/outside temperature Indicate when the summer bypass is activated Indicate when frost protection is activated Indicate when the filters require cleaning/changing Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature  Construction Manufactured of EPP for quietness and efficiency   Mounting The units are ceiling mounted Accessories Condensation Drain – 297 AQH200 Replacement filters - SPR442 8m Data cable – AQHC-CC8

GBP 1447.80
1

Zehnder ComfoAir 155 CM for ceiling mounting

Zehnder ComfoAir 155 CM for ceiling mounting

Zehnder ComfoAir 155 CM for ceiling mounting Product Part Number CA155CM-GB Description Zehnder ComfoAir 155 CM - CA155CM-GB The Zehnder ComfoAir 155 CM is a ceiling mounted MVHR unit suitable for properties up to 150m2 and manufactured in Germany to a high standard This unit has a (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems Key features Suitable for home sizes up to 150m2 Airflow rate @100Pa - 285m3/h 93% heat recovery efficiency. 100% full and filtered modulating summer bypass. Internal Humidity sensor Left- or right-hand configuration through software 100% variable AUX speed for use as a way mode, medium speed or purge boost. BMS compatibility option. Volt free contact Adaptive comfort technology. G3 filtration Tool free filter access. SAP Appendix Q listed Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers (optional) There are 3 options of additional wall controller Zehnder ZGRC1 The Zehnder ZGRC1 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system notifications Key Benefits 2 separate ventilation flow rate options to select in 1 controller Summer bypass indicator Frost protection indicator Service and Maintenance alert Automatic switching back to low speed after a pre-set time period to avoid the unit accidentally being left in its high speed  Zehnder ZGS1 The Zehnder ZGS1 is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate  Zehnder ZGS2 The Zehnder ZGS2 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate   Room Sensors Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes Zehnder THR The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set temperature activation between 5-35°C Fixed 2-minute overrun timer BMS Control BMS integration is possible Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. Installation  bracket is included with unit Construction The Zehnder range are manufactured of EPP with plastic outer covers Motors Quality EC motors Filtration 2 x G4 filters are fitted to the unit that are easy to replace Optional G4 to air supply Summer By-Pass

GBP 1434.06
1

Clearance BSK Scholar Classroom Heat Recovery Unit

Clearance BSK Scholar Classroom Heat Recovery Unit

BSK Scholar Classroom Heat Recovery Unit Product Part Number BSK Scholar 700 - Scholar 700 Description Highly efficient heat recovery unit specially designed for classrooms, meeting rooms and offices that do not have existing ventilation systems. These units provide 100% fresh air into the area and exhausting dirty air. Fresh air is passed through a double filter system which gets rid of dust, pollen, spores and other harmful particles. Due to the highly efficiency counter flow heat exchanger inside, the heat energy of the exhausted air is used to heat up the fresh taken from outside. No energy is wasted for this passive heating process. In this way, you can significantly decrease your heating costs against conventional ventilation methods. Technical Features Airflow capacity - 1500 m3h/r @ 150Pa Dimensions Scholar 500 – 575mm x 780mm x 1650mm Dimensions Scholar 700 – 625mm x 780mm x 1650mm Weight Scholar 500 – 140kg Weight Scholar 700 – 160kg Scholar 500 ducting connection – 160mm Scholar 700 ducting connection – 180mm Operating temperature -20°C to 60°C

GBP 1841.28
1

Zehnder Caladair Commercial Hexamotion Heat Recovery Ventilation Units

Zehnder Caladair Commercial Hexamotion Heat Recovery Ventilation Units

Zehnder Caladair Commercial Hexamotion Heat Recovery Ventilation Units Product Part Number Caladair HEXAMOTION 05 D FIRST ECO - CAL49 Caladair HEXAMOTION 08 D FIRST ECO - CAL50 Caladair HEXAMOTION 15 D FIRST ECO - CAL51 Caladair HEXAMOTION 20 D FIRST ECO - CAL52 Caladair HEXAMOTION 27 D FIRST ECO - CAL53 Caladair HEXAMOTION 35 D FIRST ECO - CAL54 Caladair HEXAMOTION 45 D FIRST ECO - CAL55 Caladair HEXAMOTION 60 D FIRST ECO - CAL56 Caladair HEXAMOTION 80 D FIRST ECO - CAL57 Key Features Airflow rates from 100 to 8000 m3/h Heat recovery efficiency up to 80% Self-regulating plug & play Air filtration, temperature control and climate comfort Multilingual communication High-performance variable speed rotary heat exchanger Suitable for office and industrial applications Low noise level for better acoustic comfort Cold recovery Heat recovery Night time cooling Dimensions Model Length (mm) Width (mm) Height (mm) 05 1215 675 805 08 1345 805 925 15 1500 805 925 20

GBP 5654.81
1

Nuaire Xboxer XBC-25 Commercial Heat Exchange Unit - (Price Varies Upon Appraisal)

Nuaire Xboxer XBC-25 Commercial Heat Exchange Unit - (Price Varies Upon Appraisal)

Nuaire Xboxer XBC-25 Commercial Heat Exchange Unit - (Price Varies Upon Appraisal) Standard model is available, additional units with extras are available include the electric preheater model and the Low-Pressure Hot Water (LPHW) heater model. Supplied with terminal box for supply and extract fan motor wiring and for interfacing to custom built control panels Nuaire XBC range of high efficiency heat recovery ventilation units designed for ceiling void applications and are suitable for external use with weather roof. Designed to save energy, improve indoor air quality, and provide the lowest noise breakout when used with Nuaire matched attenuators. Please note that all XBC units are supplied as eft hand units as standard, unless other wise stated on your order. Key Features: High heat exchange efficiency - Up to 95% Low noise Units are aluzinc, asymmetric, high mass, double skinned wall construction with specialist acoustic treatment Compact & flexible - lowest case height (by duty) with unique supply/extract are on unit centreline, intake/extract connections are configurable on site to either side of the unit. Optimum performance – Backward curved impellers and IP54 EC motors provide low specific fan powers and step-less speed control without tonal noise generation. Blowers are ErP 2015 compliant. The unit is designed for side access as standard and must be installed with a minimum of 260mm clearance from a wall or barrier. This will provide access to filters, coil, fan, heat exchanger condensate tray and pump. Technical Features Up to 75% efficient Voltage / Phase / Frequency – 230V / 1 phase / 50 Hz Max operating temperature – 60°C Maximum fan speed (RPM) - 3700 Unit Weight (kg) – 242 Sound level @3m dB(A): 40 – 64 G4 extract and supply filters Counter plate heat exchanger 100% bypass Dimensions (standard model)L x W x D – 1700mm x 1150mm x 340mm Benefits of working with BPC Ventilation Number 1 leading MVHR and ventilation system specialists Large range of systems for domestic and commercial applications

GBP 11130.25
1

Nuaire Xboxer XBC-15 Commercial Heat Exchange Unit - (Price Varies Upon Appraisal)

Nuaire Xboxer XBC-15 Commercial Heat Exchange Unit - (Price Varies Upon Appraisal)

Nuaire Xboxer XBC-15 Commercial Heat Exchange Unit - (Price Varies Upon Appraisal) Standard model is available, additional units with extras are available include the electric preheater model and the Low-Pressure Hot Water (LPHW) heater model. Supplied with terminal box for supply and extract fan motor wiring and for interfacing to custom built control panels Nuaire XBC range of high efficiency heat recovery ventilation units designed for ceiling void applications and are suitable for external use with weather roof. Designed to save energy, improve indoor air quality, and provide the lowest noise breakout when used with Nuaire matched attenuators. Please note that all XBC units are supplied as eft hand units as standard, unless other wise stated on your order. Key Features: High heat exchange efficiency - Up to 95% Low noise Units are aluzinc, asymmetric, high mass, double skinned wall construction with specialist acoustic treatment Compact & flexible - lowest case height (by duty) with unique supply/extract are on unit centreline, intake/extract connections are configurable on site to either side of the unit. Optimum performance – Backward curved impellers and IP54 EC motors provide low specific fan powers and step-less speed control without tonal noise generation. Blowers are ErP 2015 compliant. The unit is designed for side access as standard and must be installed with a minimum of 260mm clearance from a wall or barrier. This will provide access to filters, coil, fan, heat exchanger condensate tray and pump. Technical Features Up to 75% efficient Voltage / Phase / Frequency – 230V / 1 phase / 50 Hz Input Power (W) - 160 Max operating temperature – 60°C Maximum fan speed (RPM) - 4000 Unit Weight (kg) – 195 Sound level @3m dB(A) – 26 – 51 G4 extract and supply filters Counter plate heat exchanger 100% bypass DimensionsL x W x D – 1600mm x 1000mm x 260mm Benefits of working with BPC Ventilation Number 1 leading MVHR and ventilation system specialists Large range of

GBP 8026.10
1

Airflow DV400 Entro MVHR Unit

Airflow DV400 Entro MVHR Unit

Airflow DV400 Entro MVHR Unit Product Part Number Airflow DV400 Unit - 90000399 Description The DV400 Entro is a highly efficient, side entry MVHR unit that can recover up to 93% of other wasted heat. The unit is made with high density EPP material which provides significant insulation and eliminates thermal bridging. DV400 has a low energy EC fans that minimise the unit's energy consumption and can help you reduce your energy bills. The unit has an easy to maintain plastic counterflow heat exchanger that prevents the airstreams from mixing and easy to clean air filters that provide you with a clean, healthy indoor air environment. The DV400 Entro complies with the ErP 2016 standards and also conforms with the more stringent proposed ErP 2018 Directive. The unit comes with an outstanding 2year warranty, is SAP Appendix Q eligible and is Passive House approved. Components with The Latest Technology The DV400 Entro includes an easily removable, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air with thermal efficiency up to 93%. At no point do the airstreams mix. The DV400 Entro unit is designed with a double filter facility that comes with 2 x ISO Coarse 60% (G4) filters as standard. There is the option to have a ISO ePM1 55% (F7) pollen filter included, which provides additional protection against invisible, harmful particles and creates an ultra-hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. Adaptable Design The lightweight design of the DV400 Entro (it only weighs 21kg) empowers to you install it in the manner that best suits the layout of your home. It can be easily installed on the wall, ceiling or floor, so no longer are you restricted by large, cumbersome units. Extra Protection & Safety The DV400 Entro is made with a high density EPP material as standard that provides significant insulation and eliminated any thermal bridging. There is the option to house the unit within a durable metal casing that will help to extend the life of the unit. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.  

GBP 2398.25
1

Airflow DV300 Entro MVHR Unit

Airflow DV300 Entro MVHR Unit

Airflow DV300 Entro MVHR Unit Product Part Number Airflow DV300 Unit - 90000398 Description The DV300 Entro is a highly efficient, side entry MVHR unit that can recover up to 93% of other wasted heat. The unit is made with high density EPP material which provides significant insulation and eliminates thermal bridging. DV300 has a low energy EC fans that minimise the unit's energy consumption and can help you reduce your energy bills. The unit has an easy to maintain plastic counterflow heat exchanger that prevents the airstreams from mixing and easy to clean air filters that provide you with a clean, healthy indoor air environment. The DV300 Entro complies with the ErP 2016 standards and also conforms with the more stringent proposed ErP 2018 Directive. The unit comes with an outstanding 2-year warranty*, is SAP Appendix Q eligible and is Passive House approved. Components with The Latest Technology The DV300 Entro includes an easily removable, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air with thermal efficiency up to 93%. At no point do the airstreams mix. The DV300 Entro unit is designed with a double filter facility that comes with 2 x ISO Coarse 60% (G4) filters as standard. There is the option to have a ISO ePM1 55% (F7) pollen filter included, which provides additional protection against invisible, harmful particles and creates an ultra-hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. Adaptable Design The lightweight design of the DV300 Entro (it only weighs 21kg) empowers to you install it in the manner that best suits the layout of your home. It can be easily installed on the wall, ceiling, or floor, so no longer are you restricted by large, cumbersome units. Extra Protection & Safety The DV300 Entro is made with a high density EPP material as standard that provides significant insulation and eliminated any thermal bridging. There is the option to house the unit within a durable metal casing that will help to extend the life of the unit. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

GBP 2173.27
1

Airflow DV250 Entro MVHR Unit

Airflow DV250 Entro MVHR Unit

Airflow DV250 Entro MVHR Unit Product Part Number Airflow DV250 Entro - 90000397 Description The DV250 Entro is a highly efficient, side entry MVHR unit that can recover up to 93% of other wasted heat. The unit is made with high density EPP material which provides significant insulation and eliminates thermal bridging. DV250 has a low energy EC fans that minimise the unit's energy consumption and can help you reduce your energy bills. The unit has an easy to maintain plastic counterflow heat exchanger that prevents the airstreams from mixing and easy to clean air filters that provide you with a clean, healthy indoor air environment. The DV250 Entro complies with the ErP 2016 standards and also conforms with the more stringent proposed ErP 2018 Directive. The unit comes with an outstanding 2-year warranty, is SAP Appendix Q eligible and is Passive House approved. Components with the Latest Technology The DV250 Entro includes an easily removable, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air with thermal efficiency up to 93%. At no point do the airstreams mix. The DV250 Entro unit is designed with a double filter facility that comes with 2 x ISO Coarse 60% (G4) filters as standard. There is the option to have a ISO ePM1 55% (F7) pollen filter included, which provides additional protection against invisible, harmful particles and creates an ultra-hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. Adaptable Design The lightweight design of the DV250 Entro (it only weighs 20kg) empowers to you install it in the manner that best suits the layout of your home. It can be easily installed on the wall, ceiling, or floor, so no longer are you restricted by large, cumbersome units. Extra Protection and Safety The DV250 Entro is made with a high density EPP material as standard that provides significant insulation and eliminated any thermal bridging. There is the option to house the unit within a durable metal casing that will help to extend the life of the unit. Accessories: In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

GBP 1948.30
1

Nuaire MRXBOXAB Hybrid Cooling Kit

Nuaire MRXBOXAB Hybrid Cooling Kit

Nuaire MRXBOXAB-HYBRID COOLING KIT   Description Nuaire’s MRXBOX Hybrid Cooling System combines year-round high levels of indoor air quality with the added benefit of summer cooling to mitigate overheating. This added cooling significantly lowers the temperature of fresh air supplied into the dwelling, helping maintain comfortable internal temperature levels even in city centre apartments on the hottest days of summer. The MRXBOX Hybrid Cooling System consists of the MRXBOXAB-ECO5B-AE acoustic unit and the MR-ECO-COOL-V Cooling module and ECO5-AE-1Z-STND Floor stand The Nuaire MRXBOXAB-ECO5B provides a maximum flow rate of 450m3/hr and is recommend running at a min flow rate of 1 ACH when cooling is required Controllability to the comfort cooler is via a room thermostatic control and the MVHR unit is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time)   CONTROL OPTIONS The Cooling unit is controlled via a wall-mounted thermostatic control (CM-THERM-CONTROL) that senses indoor temperature and activates the cooling module when necessary. The thermostat is pre-set at 23°C but can be adjusted. If the property reaches this temperature, the cooling module will automatically activate to lower the temperature of the fresh air entering your home. The MVHR will also raise to a higher speed to increase fresh air supply and stale air extraction at the same time. Once the temperature in your home drops below this temperature, the cooling module will automatically turn off and the MVHR will return to its original speed. The Nuaire MRXBOX MVHR units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Ducting All MVHR units using a comfort cooler require all ductwork insulated and capable of achieving a minimum of 1 ACH (air changes per hour) to all areas  

GBP 7567.66
1