70 results (0,14996 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Zeta FS-TL-50EX Long Flame Simulator

Zeta FS-TL-50EX Long Flame Simulator

Zeta FS-TL-50EX Long Flame SimulatorFor safe testing of UVIR and Triple IR IR3 flame detectors without the need to start real fires. Long range simulating up to approximately 30 metres for Triple IRIR3 and up to approximately 15 metres for UVIR. The Flame Simulator is portable lightweight and is designed to meet Explosion proof standards.Kit ContentsTest LampTelescope SightHandleACDC Power AdaptorAluminium Carrying CaseTripod its mounting base optionalKey FeaturesExtremely Long Range Fire SimulatingUp to approx 30 meters for Triple IRIR3Up to approx 15 meters for UVIRSafe testing without the need to ignite a dangerous real flame fire allowable in a hazardous area and safe testing also in non-hazardous areas

GBP 6254.18
1

Vimpex SG2-FS-R SmartGuard 2 Flush Mounting with Sounder - Red

Vimpex SG2-FS-R SmartGuard 2 Flush Mounting with Sounder - Red

Vimpex SG2-FS-R SmartGuard 2 Flush Mounting with Sounder - RedThe SmartGuard 2 is larger than the standard sized SmartGuard and is designed to be installed over German and US style call points and pull stations. SmartGuard 2 offers the same features and installation options as SmartGuard.Key FeaturesDesigned for ease of installation the SmartGuard can be fitted in minutesAn optional battery powered 90dB alarm can be fitted increasing the security and protection of the device it is coveringA break seal can also be fitted to increase the visible deterrent against misuseDesigned to be installed over German and US style call points and pull stationsColour RedFlush mounting

GBP 81.40
1

Nursecall Intercall FS-PIR InfraRed Bedside Monitor

Nursecall Intercall FS-PIR InfraRed Bedside Monitor

Nursecall Intercall FS-PIR InfraRed Bedside MonitorThe InfraRed Bedside Monitor uses infrared detection technology to determine when a fall risk patient or resident leaves bed. The monitor sounds an alarm to alert the caregiver when the patient breaks an infrared beam eliminating the need for sensor pads or strings attached to the patient. This monitor is battery powered not included making it completely portable andparticularly useful where the presence of cords or strings is undesirable.Beeping or chime alarm options sound locally at the bedside and the monitor also has a nurse call output allowing for connection to most nursecall systems when used with the optional nursecall cable. The InfraRed Bedside Monitor comes with a C-clamp and Velcro strips for easy mounting on the bed frame or on the headboard or footboard of the bed.An optional sturdy extension bracket is also available along with an optional mains power adapter. This monitor comes with a low battery alert one year limited warranty and has been used successfully in thousands of care homes as an aid to help caregivers improve the safety of fall risk residents.Key FeaturesDetects bed exit without the use of sensor pads or strings attached to patientCan be used without any cords or strings near patientBeep or Chime alarm tonesCan be connected to most nurse call systems with optional cablePowered by standard 9-volt battery or optional mains power adaptorMounts easily to bed frame headboard or footboardLow-battery indicatorOne-year warrantyOptional extension mounting bracket 0121-125 Silent alarm option when connected to nurse call system

GBP 128.75
1

Vimpex SG-FS-G SmartGuard Flush Call Point Cover with Sounder Green

Vimpex SG-FS-G SmartGuard Flush Call Point Cover with Sounder Green

Vimpex SG-FS-G SmartGuard Flush Call Point Cover with Sounder GreenThe SmartGuard is a tough polycarbonate hinged protective cover that can easily be installed over a range of call points emergency switches and other devices to provide protection from vandalism accidental damage or misuse.The SmartGuard can also be fitted with an integral battery powered alarm that when lifted emits an ear piercing 90dB pre-alarm warning the user that the device is for emergency use only and should not be tampered with. In its red form it is commonly installed over fire alarm break glass call points to protect the break glass from deliberate misuse or accidental damage and this subsequently reduces the incidents of false fire alarms.Key FeaturesSmart design and engineering resulting in an aesthetically pleasing but tough retrofit able protective coverDesigned for ease of installation the SmartGuard can be fitted and protecting devices in minutesAn optional battery powered 90dB alarm can be fitted increasing the security and protection of the device it is coveringThe alarmed SmartGuard has a 3 year battery life and incorporates a low battery warning LEDA break seal can also be fitted to increase the visible deterrence against misuseThree surface mounting spacers are available 18mm 32mm standard and 50mm

GBP 52.72
1

Vimpex SG-FS-Y SmartGuard Flush Call Point Cover with Sounder Yellow

Vimpex SG-FS-Y SmartGuard Flush Call Point Cover with Sounder Yellow

Vimpex SG-FS-Y SmartGuard Flush Call Point Cover with Sounder YellowThe SmartGuard is a tough polycarbonate hinged protective cover that can easily be installed over a range of call points emergency switches and other devices to provide protection from vandalism accidental damage or misuse.The SmartGuard can also be fitted with an integral battery powered alarm that when lifted emits an ear piercing 90dB pre-alarm warning the user that the device is for emergency use only and should not be tampered with. In its red form it is commonly installed over fire alarm break glass call points to protect the break glass from deliberate misuse or accidental damage and this subsequently reduces the incidents of false fire alarms.Key FeaturesSmart design and engineering resulting in an aesthetically pleasing but tough retrofit able protective coverDesigned for ease of installation the SmartGuard can be fitted and protecting devices in minutesAn optional battery powered 90dB alarm can be fitted increasing the security and protection of the device it is coveringThe alarmed SmartGuard has a 3-year battery life and incorporates a low battery warning LEDFlush mount coverUniversal fitDimensions H 186mm W 121mm D 38mm 32mm spacerCall point slot dimensions 95mm x 95mmComes with a 32mm surface mounting spacer as standard

GBP 52.72
1

Vimpex SG-FS-B SmartGuard Flush Call Point Cover with Sounder Blue

Vimpex SG-FS-B SmartGuard Flush Call Point Cover with Sounder Blue

Vimpex SG-FS-B SmartGuard Flush Call Point Cover with Sounder BlueThe SmartGuard is a tough polycarbonate hinged protective cover that can easily be installed over a range of call points emergency switches and other devices to provide protection from vandalism accidental damage or misuse.The SmartGuard can also be fitted with an integral battery powered alarm that when lifted emits an ear piercing 90dB pre-alarm warning the user that the device is for emergency use only and should not be tampered with. In its red form it is commonly installed over fire alarm break glass call points to protect the break glass from deliberate misuse or accidental damage and this subsequently reduces the incidents of false fire alarms.Key FeaturesSmart design and engineering resulting in an aesthetically pleasing but tough retrofit able protective coverDesigned for ease of installation the SmartGuard can be fitted and protecting devices in minutesAn optional battery powered 90dB alarm can be fitted increasing the security and protection of the device it is coveringThe alarmed SmartGuard has a 3-year battery life and incorporates a low battery warning LEDA break seal can also be fitted to increase the visible deterrence against misuseFlush mount coverUniversal fitDimensions H 186mm W 121mm D 38mm 32mm spacerCall point slot dimensions 95mm x 95mmComes with a 32mm surface mounting spacer as standard

GBP 52.72
1

Vimpex SG-FS-R SmartGuard Flush Call Point Cover with Sounder Red

Vimpex SG-FS-R SmartGuard Flush Call Point Cover with Sounder Red

Vimpex SG-FS-RSmartGuard Flush Call Point Cover with Sounder RedTThe SmartGuard is a tough polycarbonate hinged protective cover that can easily be installed over a range of call points emergency switches and other devices to provide protection from vandalism accidental damage or misuse.The SmartGuard can also be fitted with an integral battery powered alarm that when lifted emits an ear piercing 90dB pre-alarm warning the user that the device is for emergency use only and should not be tampered with. In its red form it is commonly installed over fire alarm break glass call points to protect the break glass from deliberate misuse or accidental damage and this subsequently reduces the incidents of false fire alarms.Key FeaturesSmart design and engineering resulting in an aesthetically pleasing but tough retrofit able protective coverDesigned for ease of installation the SmartGuard can be fitted and protecting devices in minutesAn optional battery powered 90dB alarm can be fitted increasing the security and protection of the device it is coveringThe alarmed SmartGuard has a 3-year battery life and incorporates a low battery warning LEDA break seal can also be fitted to increase the visible deterrence against misuseFlush mount coverUniversal fitDimensions H 186mm W 121mm D 38mm 32mm spacerCall point slot dimensions 95mm x 95mmComes with a 32mm surface mounting spacer as standard

GBP 52.72
1

Vimpex SG-FS-W SmartGuard Flush Call Point Cover with Sounder White

Vimpex SG-FS-W SmartGuard Flush Call Point Cover with Sounder White

Vimpex SG-FS-W SmartGuard Flush Call Point Cover with Sounder WhiteThe SmartGuard is a tough polycarbonate hinged protective cover that can easily be installed over a range of call points emergency switches and other devices to provide protection from vandalism accidental damage or misuse.The SmartGuard can also be fitted with an integral battery powered alarm that when lifted emits an ear piercing 90dB pre-alarm warning the user that the device is for emergency use only and should not be tampered with. In its red form it is commonly installed over fire alarm break glass call points to protect the break glass from deliberate misuse or accidental damage and this subsequently reduces the incidents of false fire alarms.Key FeaturesSmart design and engineering resulting in an aesthetically pleasing but tough retrofit able protective coverDesigned for ease of installation the SmartGuard can be fitted and protecting devices in minutesAn optional battery powered 90dB alarm can be fitted increasing the security and protection of the device it is coveringThe alarmed SmartGuard has a 3-year battery life and incorporates a low battery warning LEDA break seal can also be fitted to increase the visible deterrence against misuseFlush mount coverUniversal fitDimensions H 186mm W 121mm D 38mm 32mm spacerCall point slot dimensions 95mm x 95mmComes with a 32mm surface mounting spacer as standard

GBP 52.72
1

Vimpex SGE-FS-Y Flush Waterproof SmartGuard Call Point Cover with Sounder YELLOW

Vimpex SGE-FS-Y Flush Waterproof SmartGuard Call Point Cover with Sounder YELLOW

Vimpex SGE-FS-Y Flush Waterproof SmartGuard Call Point Cover with Sounder YELLOWThe waterproof SmartGuard is a tough polycarbonate hinged waterproof protective cover that can easily be installed over a range of call points emergency switches and other devices to provide protection from vandalism accidental damage or misuse. It has been designed and engineered to provide protection for devices exposed to hostile environments.The waterproof SmartGuard can also be fitted with an integral battery powered alarm that when lifted emits an ear piercing 90 dB alarm warning the user that the device is for emergency use only and should not be tampered with.Applications include off-shore the food and beverage industry swimming pools and leisure centres underground installations and any area where exposure to the environment is likely to cause damage to control equipment or switching devices.Key FeaturesSmart design and engineering resulting in an aesthetically pleasing but tough retrofittable protective coverDesigned for ease of installation the cover can be fitted and protecting devices in minutesAn optional battery powered 90 dB alarm can be fitted increasing the security and protection of the device it is coveringThe alarmed cover has a 3 year battery life and incorporates a low battery warning LEDA break seal can also be fitted to increase the visible deterrence against misuse

GBP 61.50
1

Vimpex SGE-FS-R Flush Waterproof SmartGuard Call Point Cover with Sounder RED

Vimpex SGE-FS-R Flush Waterproof SmartGuard Call Point Cover with Sounder RED

Vimpex SGE-FS-R Flush Waterproof SmartGuard Call Point Cover with Sounder REDThe SmartGuard is a tough polycarbonate hinged waterproof protective cover that can easily be installed over a range of call points emergency switches and other devices to provide protection from vandalism accidental damage or misuse. It has been designed and engineered to provide protection for devices exposed to hostile environments.The SmartGuard can also be fitted with an integral battery powered alarm that when lifted emits an ear piercing 90dB pre-alarm warning the user that the device is for emergency use only and should not be tampered with. Applications include off-shore the food and beverage industry swimming pools and leisure centres underground installations and any area where exposure to the environment is likely to cause damage to control equipment or switching devices.Key FeaturesSmart design and engineering resulting in an aesthetically pleasing but tough retrofitable protective coverDesigned for ease of installation the SmartEnviro can be fitted and protecting devices in minutesAn optional battery powered 90dB alarm can be fitted increasing the security and protection of the device it is coveringThe alarmed SmartGuard has a 3 year battery life and incorporates a low battery warning LEDA break seal can also be fitted to increase the visible deterrence against misuseAvailable in 5 colours red green yellow blue and whiteThree surface mounting spacers are available 18mm 32mm standard and 50mmThe backboxes in the picture above is for illustrative purposes only

GBP 61.50
1

Vimpex SGE-FS-B Flush Waterproof SmartGuard Call Point Cover with Sounder Blue

Vimpex SGE-FS-B Flush Waterproof SmartGuard Call Point Cover with Sounder Blue

Vimpex SGE-FS-B Flush Waterproof SmartGuard Call Point Cover with Sounder BlueThe Waterproof SmartGuard is a tough polycarbonate hinged waterproof protective cover that can easily be installed over a range of call points emergency switches and other devices to provide protection from vandalism accidental damage or misuse. It has been designed and engineered to provide protection for devices exposed to hostile environments.The Waterproof SmartGuard can also be fitted with an integral battery powered alarm that when lifted emits an ear piercing 90dB pre-alarm warning the user that the device is for emergency use only and should not be tampered with. Applications include off-shore the food and beverage industry swimming pools and leisure centres underground installations and any area where exposure to the environment is likely to cause damage to control equipment or switching devices.Key FeaturesSmart design and engineering resulting in an aesthetically pleasing but tough retrofitable protective coverDesigned for ease of installation the SmartGuard can be fitted and protecting devices in minutesAn optional battery powered 90dB alarm can be fitted increasing the security and protection of the device it is coveringThe alarmed SmartGuard has a 3 year battery life and incorporates a low battery warning LEDA break seal can also be fitted to increase the visible deterrence against misuseThree surface mounting spacers are available 18mm 32mm standard and 50mmSupplied with full fitting instructions and wall fixingsIP54 Outdoor Protective Waterproof coverFitted and protecting devices in minutesA break seal can be fitted as a visible deterrentPlease note The back box in the image is for illustrative purposes only.

GBP 61.50
1

Vimpex SGE-FS-G Flush Waterproof SmartGuard Call Point Cover with Sounder Green

Vimpex SGE-FS-G Flush Waterproof SmartGuard Call Point Cover with Sounder Green

Vimpex SGE-FS-G Flush Waterproof SmartGuard Call Point Cover with Sounder GreenThe Waterproof SmartGuard is a tough polycarbonate hinged waterproof protective cover that can easily be installed over a range of call points emergency switches and other devices to provide protection from vandalism accidental damage or misuse. It has been designed and engineered to provide protection for devices exposed to hostile environments.The Waterproof SmartGuard can also be fitted with an integral battery powered alarm that when lifted emits an ear piercing 90dB pre-alarm warning the user that the device is for emergency use only and should not be tampered with. Applications include off-shore the food and beverage industry swimming pools and leisure centres underground installations and any area where exposure to the environment is likely to cause damage to control equipment or switching devices.Key FeaturesSmart design and engineering resulting in an aesthetically pleasing but tough retrofitable protective coverDesigned for ease of installation the SmartGuard can be fitted and protecting devices in minutesAn optional battery powered 90dB alarm can be fitted increasing the security and protection of the device it is coveringThe alarmed SmartGuard has a 3 year battery life and incorporates a low battery warning LEDA break seal can also be fitted to increase the visible deterrence against misuseThree surface mounting spacers are available 18mm 32mm standard and 50mmSupplied with full fitting instructions and wall fixingsIP54 Outdoor Protective Waterproof coverFitted and protecting devices in minutesA break seal can be fitted as a visible deterrentPlease note The back box in the image is for illustrative purposes only.

GBP 61.50
1

Vimpex SGE-FS-W Flush Waterproof SmartGuard Call Point Cover with Sounder White

Vimpex SGE-FS-W Flush Waterproof SmartGuard Call Point Cover with Sounder White

Vimpex SGE-FS-W Flush Waterproof SmartGuard Call Point Cover with Sounder WhiteThe Waterproof SmartGuard is a tough polycarbonate hinged waterproof protective cover that can easily be installed over a range of call points emergency switches and other devices to provide protection from vandalism accidental damage or misuse. It has been designed and engineered to provide protection for devices exposed to hostile environments.The Waterproof SmartGuard can also be fitted with an integral battery powered alarm that when lifted emits an ear piercing 90dB pre-alarm warning the user that the device is for emergency use only and should not be tampered with. Applications include off-shore the food and beverage industry swimming pools and leisure centres underground installations and any area where exposure to the environment is likely to cause damage to control equipment or switching devices.Key FeaturesSmart design and engineering resulting in an aesthetically pleasing but tough retrofitable protective coverDesigned for ease of installation the SmartGuard can be fitted and protecting devices in minutesAn optional battery powered 90dB alarm can be fitted increasing the security and protection of the device it is coveringThe alarmed SmartGuard has a 3 year battery life and incorporates a low battery warning LEDA break seal can also be fitted to increase the visible deterrence against misuseThree surface mounting spacers are available 18mm 32mm standard and 50mmSupplied with full fitting instructions and wall fixingsIP54 Outdoor Protective Waterproof coverFitted and protecting devices in minutesA break seal can be fitted as a visible deterrentPlease note The back box in the image is for illustrative purposes only.

GBP 61.50
1

Notifier 841156-0410 Bose FreeSpace FS4CE White - BS EN 54-24 - 40 Watt Ceiling Mount - Loudspeaker

Notifier 841156-0410 Bose FreeSpace FS4CE White - BS EN 54-24 - 40 Watt Ceiling Mount - Loudspeaker

Notifier 841156-0410 Bose FreeSpace FS4CE White - BS EN 54-24 - 40 Watt Ceiling Mount - LoudspeakerFreeSpace FS loudspeakers are the next step of our widely trusted line of in-ceiling and surface-mount loudspeakers offering significant upgrades in durability design and ease of installation all with remarkably consistent tonality.Engineered for high-quality performance in both background music and voice announcement applications FS loudspeakers are ideal for almost any commercial space. The line includes five loudspeakers two distinct levels of sound new mounting options and a modern aesthetic to match. For those seeking consistent quality installed sound FreeSpace FS loudspeakers are the perfect mix of performance and value.The FS4CE is an in-ceiling model with a full-range 4.5- inch transducer low frequency range down to 70 Hz and sensitivity of 88 dB SPL 1W 1m.

GBP 904.02
1

Notifier 841156-0310 Bose FreeSpace FS4CE Black - BS EN 54-24 - 40 Watt Ceiling Mount - Loudspeaker

Notifier 841156-0310 Bose FreeSpace FS4CE Black - BS EN 54-24 - 40 Watt Ceiling Mount - Loudspeaker

Notifier 841156-0310 Bose FreeSpace FS4CE Black - BS EN 54-24 - 40 Watt Ceiling Mount - LoudspeakerFreeSpace FS loudspeakers are the next step of our widely trusted line of in-ceiling and surface-mount loudspeakers offering significant upgrades in durability design and ease of installation all with remarkably consistent tonality.Engineered for high-quality performance in both background music and voice announcement applications FS loudspeakers are ideal for almost any commercial space. The line includes five loudspeakers two distinct levels of sound new mounting options and a modern aesthetic to match. For those seeking consistent quality installed sound FreeSpace FS loudspeakers are the perfect mix of performance and value.The FS4CE is an in-ceiling model with a full-range 4.5- inch transducer low frequency range down to 70 Hz and sensitivity of 88 dB SPL 1W 1m.

GBP 904.02
1

Ziton Software FiRe Server 2010-2SW-FS

Ziton Software FiRe Server 2010-2SW-FS

Ziton Software FiRe Server 2010-2SW-FSThe 2010-2 fire panels allow external connections via an SDK Software Development Kit as well as connections from mobile devices like iPhone iPad Android windows phones. The communication between the panel and the mobile devices is provided by the FiRe application server which allows setting up users configuring panel features handles the authentication and can act as a firewall for the connected clients. The communication between the FiRe server and mobile application is based on a modern RESTlessREST REpresentational State Transfer interface. The provided mobile application allows the basic functionality of checking system status and basic control. The additional features OMWT One Man Walk Test and output tests streamline the installation and maintenance process. The mobile application is available in 12 languages for easier installer usage and acceptance. The application is activated by use of a USB dongle to be installed on the server running the FiRe server application.Key FeaturesCheck status of the systemCheck and confirm notificationsCheck panel history event logBasic control reset soundsilence enabledisable devices show LED to find deviceOMWT One Man Walk TestOutput testCompatible with panels as of firmware version 3.5

GBP 107.90
1

Morley 04390-55 Door Retention Unit - 240Vac White

Morley 04390-55 Door Retention Unit - 240Vac White

Morley 04390-55 Door Retention Unit - 240Vac WhiteMorleys range of door holders provide attractive aesthetics and high performance for buildings requiring an automatic door release function in the event of a fire emergency.Each door holder is fitted with a spring-loaded release pin mounted centrally within the electromagnet. On power off the release pin then pushes the door away from the electromagnet. This overcomes any residual magnetism ensuring correct operation.The D.C. unit is fitted with a suppression diode and protection against reverse polarity such that it may be operated from a reverse polarity monitored circuit.All the electromagnets are designed to comply with the latest requirements of EN61000-3-2 EN50081-1 EN60950 and EN1155 CPD Approved. The low profile flame retardant ABS housing results in an attractive and robust design and contains a push button for quick easy release of the door.DRW Door HoldersTo close fire doors in an emergency and prevent the spread of fire and smoke. Door holders are fitted with an integral manual release button allowing the door to be closed without operating the fire alarm. Both versions are supplied with a door mounting keeper plate.Key FeaturesLow profile design200N holding forceEasy cable entry exitA.C. or D.C. optionsPush button releasetestFloor mounting bracket availableAnti-residual magnetism featureD.C. version polarised and suppressedEN1155 1997 CPD Approved

GBP 45.92
1