11.960 results (0,14490 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Elmdene G1224-84N-H Switchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSU - H Box

Elmdene G1224-84N-H Switchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSU - H Box

Elmdene G1224-84N-H Switchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSU - H BoxThe 12V G Range N Series power supply has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The product uses energy efficient switch mode technology and have a universal mains supply input.The advantage of switch mode technology is efficiency typically 80-87. This can save users money by reducing their energy bills and carbon footprint. Switch mode technology ensures lower power consumption provides cool running and energy efficiency that can result in improved long term reliability.Key FeaturesCost effective switch mode technologyFront tamper protectionModular construction means easy maintenance and upgradingIndependent ancillary relayFull rated current to load 0.5A battery chargingElectronic overload and mains transient protection3 years manufacturers warrantyEnclosure size HxWxD 420x420x180mmMax. battery 12V 1x 12V 38Ah 24V 2x 12V 38AhUnboxed module HxWxD 55x143x157mmPlease note The image is for illustrative purposes only. Please refer to the product description.

GBP 199.26
1

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU The new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 4Amp 24V dc 2Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 92.04
1

Elmdene G1224-42NU 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU Unboxed

Elmdene G1224-42NU 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU Unboxed

Elmdene G1224-42NU 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU UnboxedThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 4Amp 24V dc 2Amp 27.6V SMPSUUnboxed Module Only157Lx143Wx55H mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 72.67
1

Elmdene G1224-84N-R 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU R Enclosure

Elmdene G1224-84N-R 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU R Enclosure

Elmdene G1224-84N-R 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU R EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUR-Enclosure 410Hx390Wx90DFits upto 2 x 12V 17Ah batteriesPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 168.36
1

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-Enclosure

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-Enclosure

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 6Amp 24V dc 3Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 126.43
1

Elmdene G1224-84N-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU C Enclosure

Elmdene G1224-84N-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU C Enclosure

Elmdene G1224-84N-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU C EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 144.74
1

Elmdene G1224-84NU 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU Module Only

Elmdene G1224-84NU 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU Module Only

Elmdene G1224-84NU 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU Module OnlyThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUUnboxed Module Only157Lx143Wx55H mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 127.46
1

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module Only

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module Only

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module OnlyThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 6Amp 24V dc 3Amp 27.6V SMPSUUnboxed Module Only157Lx143Wx55H mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 97.57
1

Elmdene LPB1224-C-S 12V-24V Low Profile High Efficiency Beacon Clear Lens

Elmdene LPB1224-C-S 12V-24V Low Profile High Efficiency Beacon Clear Lens

Please noteThis product is now obsolete. We may have limited stock available pleasecontact usbefore purchasing.Elmdene LPB1224-C-S 12V-24V Low Profile High Efficiency Beacon Clear LensDual 12V24V low profile flashing beacons utilising efficient LED technology for indoor and outdoor use.Key FeaturesDual 12V24V dc modelsRed Blue Amber and Clear lens optionsIP66 ratedUses LED technology1Hz flash rateLow current operationFresnel Lens

GBP 6.59
1

Elmdene VRS121000EE 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded European Plug

Elmdene VRS121000EE 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded European Plug

Elmdene VRS121000EE 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded European PlugElmdenes Vision 12V encapsulated power supplies have been designed specifically for CCTV applications.The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection. They also have high efficiency switch mode operation which means lower running temperature and lower running costs.The encapsulated devices all have a neat compact design and come fitted with a European plug EE.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesFully regulated 12V dc outputHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionUniversal 100 240V ac mains supplyCompact sizeFitted with European plug2.1mm dc output jack socket on flying lead3 year warrantyEncapsulated in plastic caseIdeal for CCTVSize 64x45x25

GBP 10.86
1