Pricemate

Morley 4-Way Sounder Output Module 1.5A Max 020-772

Morley 4-Way Sounder Output Module 1.5A Max 020-7724 way sounder output module 1.5A max. Provides 4 monitored circuits with provision for external PSU and 2 digital inputs.

GBP 223.76

1

Advanced ExGo 8 Way Relay Output Card - EXP-008

Advanced ExGo 8 Way Relay Output Card - EXP-008The 2 or 8 Way Relay Output Card is an internal peripheral for use with The ExGo series control panels and status indicators. This additional PCB provides a cost effective solution to providing 2 or 8 individually programmable 1 Amp rated volt free clean contact outputs.The 2 or 8 Way Relay Output Card connects directly to thepanels motherboard in which each outputcan be individually programmed.Ideal for any application where a number of programmable outputs are required at the panel. The features of the 2 or 8 Way Relay Output Card not only aid commissioning and cut down on expensive ancillary hardware but also allow the system to be easily configured to provide additional outputs for the more complex cause and effect configurations using standard products.Key Features2 or 8 individual programmable outputsEach output individually programmableFast responseEach output 30V ACDC 1 Amp ratingCost effective against ancillary hardwareOptional fail-safe setupEasily programmable by on board keypadPlease Note This is to be used with theAdvanced EX-3001 ExGo Three Zone Automatic Gas Extinguishing Panel only.

GBP 258.78

1

Advanced ExGo 8-Way Relay Output Card for use with EX-3001 only Fitted EXP-008F

8-Way Relay Output Card for use with EX-3001 only Fitted EXP-008FThe 2 or 8 Way Relay Output Card is an internal peripheral for use with The ExGo series control panels and status indicators. This additional PCB provides a cost effective solution to providing 2 or 8 individually programmable 1 Amp rated volt free clean contact outputs.The 2 or 8 Way Relay Output Card connects directly to thepanels motherboard in which each outputcan be individually programmed.Ideal for any application where a number of programmable outputs are required at the panel. The features of the 2 or 8 Way Relay Output Card not only aid commissioning and cut down on expensive ancillary hardware but also allow the system to be easily configured to provide additional outputs for the more complex cause and effect configurations using standard products.Key Features2 or 8 individual programmable outputsEach output individually programmableFast responseEach output 30V ACDC 1 Amp ratingCost effective against ancillary hardwareOptional fail-safe setupEasily programmable by on board keypadPlease Note This is to be used with theAdvancedEX-3001ExGo Three Zone Automatic Gas Extinguishing Panel only.

GBP 258.78

1

Aritech ATS1520 2 Way Audio Listen-In Module Half Duplex Via PSTNGSM For Advisor Advanced

Aritech ATS1520 2 Way Audio Listen-In Module Half Duplex Via PSTNGSM For Advisor AdvancedATS1520 Two-way Audio Module is an audio switcher for Advisor Advanced control panel that is used for audio alarm verification. The module allows to connect ATS1521 satellites installed in the protected premises.The solution provides a half duplex audio connection to the CMS operator via an analogue communication path PSTNGSM. The associated speakermicrophone will be enabled whenever an alarm event is associated.The operator can use DTMF codes to remotely control the speakers microphone modules or activate an output.Key FeaturesIntegrated alarm and audio verificationMounted in panel housingConnects to Advisor Advanced MI busConnects to audio interface of ATS1521 speakermicro modulesMax audio output power 4WAnalogue voice over PSTN connectionProgrammable per Zone input Keypad duress Panic buttonLife listen in by CMS operator after alarmDTMF control to switch between listen and speakDTMF control to activate an outputDedicated service menu to commission every individual ATS1521 audio deviceSupported SIA XSIA

GBP 199.54

1

C-Tec CA737 EACIE 4 Way Flat Interface No PSU In Cabinet Extendable To 8 Way

C-Tec CA737 EACIE 4 Way Flat Interface No PSU In Cabinet Extendable To 8 WayThe C-Tec CA737 is a loop powered 4-8 way flat interface for use on the C-TEC EVAC-ALERT system. It is supplied as a 4-circuit unit extendable to 8 using CA737PCBDetailsA loop-powered 4-8 way flat interface for use on a C-TEC EVAC-ALERT systemSupplied as a 4 circuit unit extendable to 8 using a CA737PCB.Provides 4 or 8 monitored 12.5mA sounder circuits to power up to 2 self-testing evacuation alert sounders per flatIncludes space and connections for an optional fully monitored auxiliary 24V 1A CA737PSU to power additional visual indicators andor vibrating pillow padsIncludes an onboard short circuit loop isolatorUses one loop address per 4 sounder circuitsSounder circuit test facility per circuitThe most practical and flexible device interfacing method for most new and refurb installations the unit is ideally mounted in a riser on each floorMaintains the independent open short circuit monitoring of all sounder circuits

GBP 340.12

1

Baldwin Boxall Flush Mount SS Bezelfor Panels 48-64 way BVCRFB1SS

Baldwin BoxallFlush Mount SS Bezelfor Panels 48-64 way BVCRFB1SSBoxall BVCRFB1SS Stainless Steel flush mount bezel.Key FeaturesFeaturesFlush mount bezel for MINI 48-64 way panelsBVOC48MS 48 wayBVOC64MS 64 way

GBP 193.24

1

Baldwin Boxall Flush Mount SS Bezel for 80-128 Way Console BVCRFB3S

Baldwin Boxall Flush Mount SS Bezel for 80-128 Way Console BVCRFB3SBoxall BVCRFB3S Stainless Steel flush mount bezel for MINI 80-124 way panels.Key FeaturesTheBVCRFB3S can be used withBVOC80MS 80 wayBVOC96MS 96 wayBVOC112MS 112 wayBVOC128MS 128 way

GBP 201.40

1

Advanced MXP-034 Peripheral Bus - 4-Way Sounder Card

Advanced MXP-034 Peripheral Bus - 4-Way Sounder CardThe Programmable 4-Way Sounder Card is an optional peripheral unit that provides four individually programmable and monitored sounder output circuits compliant with BSEN54-2 1998 Clause 7.8.Up to 16 Cards can be connected to a multi-loop panel providing a maximum of 64 additional local sounder outputs.Each output is fully programmable using the powerful DynamiX Cause and Effect rules and all outputs are synchronised. The unit is available as either a printed circuit card only or as a boxed version with integral 4A power supply.Key Features4 Way Programmable Sounder Card16 cards max per Control panel totalling 64 1 Amp rated outputsEasily configured via PC-NET-0033 Year Warranty as standardFully SynchronisedEach output is 1A rated and monitored for open and short circuitsEach output is individually programmable using the Dynamix cause-and-effects rulesAll outputs can be synchronised in pulsing modesUp to 16 cards can be connected giving a total of 64 additional outputsEach output may be individually programmed

GBP 314.51

1

Crowcon 00061A Set Of 3 Ribbon Cables 163450 way 1m length

Crowcon 00061A Set Of 3 Ribbon Cables 163450 way 1m lengthReplacement spares are common across multiple gas products. The 00061A is a set of 3 ribbon cables.Key Features1m length163450 way

GBP 184.68

1

C-Tec CA737PCB EACIE 4 Way Flat Interface PCB Only

C-Tec CA737PCB EACIE 4 Way Flat Interface PCB OnlyThe CA737PCB is a PCB designed for use with the C-Tec CA737 EACIE 4 Way flat interface.Allows the CA737 to be extended to 8 circuit units.

GBP 323.92

1

Baldwin Boxall BVCRM2 Rack Mount Kit for Consoles 80-128 Way 20U

Baldwin Boxall BVCRM2 Rack Mount Kit for Consoles 80-128 Way 20UThe BVCRM2 is an OmniCare Console Rack Mount Kit 20U.Key FeaturesDesigned for 80-128 way panels

GBP 269.44

1

Advanced MxPro MXP-034F Peripheral Bus - 4-Way Sounder Card Fitted

Advanced MxPro MXP-034F Peripheral Bus - 4-Way Sounder Card FittedThe Programmable 4-Way Sounder Card is an optional peripheral unit that provides four individually programmable and monitored sounder output circuits compliant with BSEN54-2 1998 Clause 7.8.Up to 16 cards can be connected to a multi-loop panel providing a maximum of 64 additional local sounder outputs.Each output is fully programmable using the powerful dynamic cause-and-effect rules and all outputs are synchronised.The unit is available as either a printed circuit card only or as a boxed version with integral 4A power supply.Applications LimitationsEN54-2 compliant sounder outputs. Can be used with MxPro 4 2 4 8 loop control panels programmed with version 020-02 software or later and fitted with base card hardware revision levels 10 712-1022 MxPro 5 4 loop and 09 712-1022-002 MxPro 5 2 loop or later.Requires installation of the Peripheral Bus Interface Adaptor card in the panel when using the MxPro 4 series.Key FeaturesEach output is 1A rated and monitored for open and short circuits.Each output is individually programmable using the Dynamix cause-and-effects rules.All outputs can be synchronised in pulsing modes.Up to 16 cards can be connected giving a total of 64 additional outputs.Each output may be individually programmedEasily configured via PC-NET-0033-year warranty as standard

GBP 314.51

1

Baldwin Boxall CARE2 4-way Expansion Kit C2CEK4

Baldwin Boxall CARE2 4-way Expansion Kit C2CEK4The CARE2 console can contain up to four C2CEK4 Line Cards enabling to extend the pane up to 8 12 or 16 way with each Line Card connecting up to Four Outstations. The Care2 Outstations are Star Wired to the console with each Outstation having its own pair of conductors.

GBP 221.35

1

Advanced MxPro5 MXP-544 P-BUS 8-Way Relay Card

Advanced MxPro5 MXP-544 P-BUS 8-Way Relay CardThe MXP-544 Peripheral 8-Way Relay Card is an internal module intended for use with the Mx-5000 range of fire alarm control panels.Each card provides 8 configurable relay outputs 2 x FORM C 6 x FORM A. Up to 16 cards may be connected to a panel allowing for an extra 128 relay outputs SELV.The MXP-544 is configured using a positive action sequence involving the on-board push button and LED indicators.This allows the module to be safely configuredinspected while adding an extra reporting capability not previously available to peripheral modules. Cards are protocol independent.Key FeaturesPowered from CIE on local PSUProvides 8 configurable relay outputsUp to 16 cards can be connected to the peripheral bus 128 relays

GBP 318.44

1

Advanced MxPro5 MXP-544F P-BUS 8-Way Relay Card Fitted

Advanced MxPro 5 MXP-544F P-BUS 8-Way Relay Card FittedThe MXP-544 Peripheral 8-Way Relay Card is an internal module intended for use with the Mx-5000 range of fire alarm control panels.Each card provides 8 configurable relay outputs 2 x FORM C 6 x FORM A. Up to 16 cards may be connected to a panel allowing for an extra 128 relay outputs SELV.The MXP-544 is configured using a positive action sequence involving the on-board push button and LED indicators.This allows the module to be safely configuredinspected while adding an extra reporting capability not previously available to peripheral modules. Cards are protocol independent.Key FeaturesPowered from CIE on local PSUProvides 8 configurable relay outputsUp to 16 cards can be connected to the peripheral bus 128 relays

GBP 318.44

1

Kentec K14031 4-Way Relay Unit

Kentec K14031 4-Way Relay Unit4-Way Relay Unit aimed at both conventional and addressable fire alarmextinguishing systems enabling key maintenance to be undertaken without compromising safety.The 4-Way Relay Unit enables simple isolation of third party systems e.g HVAC security access control etc connected to the fire alarm system this allows repairs and maintenance to be carried on the fire alarm system without compromising the functionality of the third-party equipment. Volt-free contacts provide safe switching of high and low voltage lines.Four double pole relays are provided three relays rated 240VAC 7A 110VAC 10A 24VDC 10A for high current switching and one relay rated 125VAC 0.5A 30VDC 2A for low current switching all housed in a robust sheet steel enclosure. Relays can be activated by using switch negative signals from up to four control panels. Isolation of the relays is enabled through simple slide switches one per relay with simple LEDs displaying the isolation status of each relay.

GBP 190.80

1

Ziton ZP3AB-RL8 Eight Way Programmable Relay Output Board

Ziton ZP3AB-RL8 Eight Way Programmable Relay Output BoardThe ZP3AB-RL8 is one of a series of additional auxiliary boards designed to extend the ZP3 panel standard range of inputoutput facilities. Boards are modular in design and are mounted inside the ZP3 panel enclosure by means of a ZP3-AC1 auxiliary chassis. Up to three boards can be fitted into a ZP3 panel. They may be all of a single type or any combination from the IO module range. The addition of auxiliary boards can increase the panel outputs to a maximum of 72 all housed within the ZP3 enclosure.Each eight way relay board is allocated an address by switch settings provided on the PCB. Individual relays within the board address are programmed in the systems cause and effect software set up. The operation of outputs is confirmed by LED indicators positioned next to each pair of relay wiring terminals.The ZP3AB-RL8 eight way relay board is part of the range of optional facility boards which can be added cost effectively to any ZP3 control panel in order to provide extra facilities that may not be a requirement of every system.Key FeaturesEight programmable relaysUp to three modules within panel enclosureOutputs rated at 2 Amps at 30 Vdc or 30 VacOperation of individual output confirmed by LED indication

GBP 346.33

1

Fireclass XIOM 16-way Universal Input Output Expansion Board

Fireclass XIOM 16-way Universal Input Output Expansion BoardThe XIOM is a 16 way universal inputoutput expansion board. The IO on the XIOM can be set in banks of 8 to operate as followsKey FeaturesLED driver outputs 10mA sourceRelay Driver Outputs 100mA sinkVoltage Monitor Input 8 - 30Vdc NormalVolt Free Contact inputs Features16 IPs or 16 OPs or 8 IP 8 OP5 per MPM800 80 IO pointsFully configurable in FireClass

GBP 311.81

1

C-Tec QT42410 Ten-Way Charging Unit for QT412

C-Tec QT42410 Ten-Way Charging Unit for QT412The QT42410 ten-way charging unit can simultaneously charge up to ten QT412 Range dual action infraredradio transmitters. Designed to be powered from a 230V a.c. mains source using the standard IEC lead supplied the unit can be wall or desk mounted to suit the transmitter storage and charging requirements of a particular site.Key FeaturesA ten-way plugtop charger designed for use with Quantecs QT412 range of IRRF transmitters.Can simultaneously charge up to ten transmitters.Connects to a standard 13A mains socket using the standard IEC lead suppliedCan be wall or desk mounted to suit the transmitter storagecharging requirements of a particular site.Fully recharged transmitters can be left connected to the charger with no detrimental effect.14-hour typical charging time full cycle.Indicators confirm when charging is complete.

GBP 265.99

1

CST JT-CH-SCAP6-X 6-Way Charger With PSU

CST JT-CH-SCAP6-X 6-Way Charger With PSUThe JT-CH-SCAP6-X is a 6-slot charging station equipped with a built-in power supply.

GBP 178.49

1

CST JT-CH-SCAP12-X 12-Way Charger With PSU

CST JT-CH-SCAP12-X 12-Way Charger With PSUThe JT-CH-SCAP12-X is a 12-slot charging station equipped with a built-in power supply.

GBP 310.63

1

Aritech FE130MD Ecoline Double Magnetic Lock 2 x 300kgs Surface Mount Unmonitored

Aritech FE130MD Ecoline Double Magnetic Lock 2 x 300kgs Surface Mount UnmonitoredEco Line double magnetic lock 2 x 300 kgf. Surface mounted monitored.ApplicationMedium Security applications for internal or external double leaf doors.Reliable SecurityThis state of the art electro-magnetic locking device provides positive instantaneous door control. Filler plates angle brackets and other mounting adapters are available to satisfy a wide range of door and frame types and conditions.Safe operationOur locking devices are inherently fail-safe releasing instantly upon command or loss of power. With no moving parts to wear stick or bind no mechanical linkages to bend or break and no bolt travel time or misalignment to raise concern both unlocking and locking are always accomplished with ease and efficiency. As those electromagnetic locking devices function independently of any mechanical type locks magnetic locks will not jeopardize the fire door rating of an opening.Key Features2 x 300 Kgf holding powerMonitored changeoverNo residual magnetism1224 V dc jumper selectable operationMounts easily with a minimum of tools

GBP 259.67

1

Haes ASP-R-12 AlarmSense PLUS 12 Way Repeater Panel

Haes ASP-R-12 AlarmSense PLUS 12 Way Repeater PanelA 12 zone fully functional or passive fire alarm repeater panel suitable for the AlarmSense PLUS panel range not suitable for ALS panels.The AlarmSense PLUS 12 way repeater panels have the same easy to use controls and indications as the main control panel.The repeaters are fully functional with Silence Resound and Reset controls as well as Disable and Test Mode functions. It is also possible to disable the controls for each or all repeater panels to make them passive indication only.The main circuit board has 2 switch ve inputs which can be used to sound or pulse the alarms. These inputs can also be re-programmed for use as PSU fault inputs.The internal comms PCB has 6 switch ve programmable outputs.The repeaters are supplied with a 1.25 amp internal power supply module.This module complies with the requirements of EN54-4 1988 and provides temperature compensated battery management chargingKey Features12 zonal fire and fault indicationsActivate controls via key switch or code entry1.25 Amp switch mode power supply Nom 27V DCClass change IPAlert IP6 programmable switched -ve outputsTest mode with or without soundersDisable zones sounder OPs aux OPs delays

GBP 372.60

1

Global Fire Equipment 2-LC-CHAMELEON Chameleon 2 Loop Card

Global Fire Equipment 2-LC-CHAMELEON Chameleon 2 Loop CardA 2 loop card for the CHAMELEON range of panels.

GBP 300.76

1

Cooper ZPCB2148P2 Loop Driver PCB 2 Loops per Card Phase 2

Cooper ZPCB2148P2 Loop Driver PCB 2 Loops per Card Phase 2Loop Driver PCB 2 Loops per Card Phase 2

GBP 385.78

1

Brand

Merchant

Price (EUR)