724 results (0,67126 seconds)

Show all filters

Brand

Show all

Colour

Size

Show all

Gender

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Lista Drawer Division Material, Pack Of 5, For Drawer Height 250mm, Divider, Length 306mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 250mm, Divider, Length 306mm

Drawer division material, pack of 5, for drawer height 250 mm, divider, length 306 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 306 mm. For drawer height = 250 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 69.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 300mm, Divider, Length 306mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 300mm, Divider, Length 306mm

Drawer division material, pack of 5, for drawer height 300 mm, divider, length 306 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 306 mm. For drawer height = 300 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 83.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 250mm, Divider, Length 170mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 250mm, Divider, Length 170mm

Drawer division material, pack of 5, for drawer height 250 mm, divider, length 170 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 170 mm. For drawer height = 250 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 52.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 300mm, Divider, Length 170mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 300mm, Divider, Length 170mm

Drawer division material, pack of 5, for drawer height 300 mm, divider, length 170 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 170 mm. For drawer height = 300 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 59.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 200mm, Divider, Length 204mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 200mm, Divider, Length 204mm

Drawer division material, pack of 5, for drawer height 200 mm, divider, length 204 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 204 mm. For drawer height = 200 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 49.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 300mm, Divider, Length 153mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 300mm, Divider, Length 153mm

Drawer division material, pack of 5, for drawer height 300 mm, divider, length 153 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 153 mm. For drawer height = 300 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 54.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 150mm, Divider, Length 306mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 150mm, Divider, Length 306mm

Drawer division material, pack of 5, for drawer height 150 mm, divider, length 306 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 306 mm. For drawer height = 150 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 49.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 250mm, Divider, Length 255mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 250mm, Divider, Length 255mm

Drawer division material, pack of 5, for drawer height 250 mm, divider, length 255 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 255 mm. For drawer height = 250 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 69.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 250mm, Divider, Length 204mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 250mm, Divider, Length 204mm

Drawer division material, pack of 5, for drawer height 250 mm, divider, length 204 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 204 mm. For drawer height = 250 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 65.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 200mm, Divider, Length 255mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 200mm, Divider, Length 255mm

Drawer division material, pack of 5, for drawer height 200 mm, divider, length 255 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 255 mm. For drawer height = 200 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 54.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 300mm, Divider, Length 204mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 300mm, Divider, Length 204mm

Drawer division material, pack of 5, for drawer height 300 mm, divider, length 204 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 204 mm. For drawer height = 300 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 69.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 300mm, Divider, Length 255mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 300mm, Divider, Length 255mm

Drawer division material, pack of 5, for drawer height 300 mm, divider, length 255 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 255 mm. For drawer height = 300 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 69.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 200mm, Divider, Length 306mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 200mm, Divider, Length 306mm

Drawer division material, pack of 5, for drawer height 200 mm, divider, length 306 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 306 mm. For drawer height = 200 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 65.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Slotted Panel, Length 459mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Slotted Panel, Length 459mm

Drawer division material, pack of 5, for drawer height 50 mm, slotted panel, length 459 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Depth = 459 mm. For drawer height = 50 mm. Model = louvred wall panel. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 69.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Slotted Panel, Depth 612mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Slotted Panel, Depth 612mm

Drawer division material, pack of 5, for drawer height 75 mm, slotted panel, depth 612 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Depth = 612 mm. For drawer height = 75 mm. Model = louvred wall panel. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 73.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Slotted Panel, Length 612mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Slotted Panel, Length 612mm

Drawer division material, pack of 5, for drawer height 50 mm, slotted panel, length 612 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Depth = 612 mm. For drawer height = 50 mm. Model = louvred wall panel. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 69.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Slotted Panel, Depth 459mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Slotted Panel, Depth 459mm

Drawer division material, pack of 5, for drawer height 75 mm, slotted panel, depth 459 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Depth = 459 mm. For drawer height = 75 mm. Model = louvred wall panel. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 69.99
1

Cep Smoove By Recycled 5 Drawer Desktop Module Grey 1071116361

Cep Smoove By Recycled 5 Drawer Desktop Module Grey 1071116361

This Smoove by CEP Recycled Drawer Unit has five drawers which can hold documents and files up to 240x320mm in size. The draws have ergonomic handles and an access slot for the easy retrieval of contents. They slide open extremely smoothly and there is a stop that prevents the drawers from sliding out completely. This drawer unit has anti-skid pads and drawer labels for the easy identification of contents. It is made from 80% post-consumer recycled material and is 100% recyclable. 5 drawer unit for desktop use Can hold documents and files up to 240x320mm in size Made from 80% post-consumer recycled material Made from high quality PS plastic 100% recyclable Smooth opening drawers Stackable up to 2 units Anti-skid pads Ergonomic handles Colour: Grey Dimensions: W360xD288xH271mm

GBP 72.99
1