29 results (0,14929 seconds)

Brand

Colour

Gender

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Ping G430 Golf Irons - Steel Mens Right Stiff AWT 2.0 6-PW+GW

Ping G430 Golf Irons - Steel Mens Right Stiff AWT 2.0 6-PW+GW

Ping G430 Golf Irons - Steel MORE DISTANCE. BETTER GAPPING. The G430 multi-material iron from PING Golf produces distance gains of approximately 7-10 yards and improved accuracy throughout the set. It’s the result of a complex design that combines a lower CG with stronger, custom engineered lofts and a thinner face that delivers up to 2 mph more ball speed – leading to significant distance gains without compromising PING’s famous forgiveness. A key contributor to the added distance is the PurFlex cavity badge, an innovation with seven flex zones that allows more free bending to increase ball speed across the face. In combination with a lower CG, the badge contributes to the solid feel and pleasing impact sound. The stronger lofts across the set resulted in the addition of a 41° PW to ensure proper gapping options and allow for standard lofts in the traditional scoring wedges (45.5°, 50°, 54°, 58°). Among the refinements to the overall shape is a shorter hosel, which creates a more compact, clean look and helps lower the CG, aligning it closer to the force line to increase ball speed and ensure solid impact, especially low on the face. Approximately 1° of additional bounce throughout the set provides clean turf interaction and pure strikes, minimising “heavy” shots that come up short. The high-density tungsten toe and shaft tip weights contribute to its high MOI and produce tighter dispersion patterns. The hydropearl 2.0 chrome finish delivers consistent performance from wet or dry grass. SHAPED FOR SUCCESS A look with a shorter hosel helps lower the CG and align it with the force line to increase ball speed and ensure solid impact, especially low on the face. PURFLEX Seven flex zones allow for more free bending to increase ball speed across the face for longer results with a solid feel and pleasing impact sound. FORGIVING SOLE DESIGN Approximately 1o additional bounce throughout the set ensures clean turf interaction and pure strikes, minimising “heav y” shotsthatcomeupshort. 2+ MPH FASTER FACE Hyper 17-4 stainless steel strengthens the face, allowing for more face flexing that generates increased distance and a higher max height to hold shots on the green. CUSTOM-ENGINEERED LOFTS Stronger lofts across the set resulted in the addition of a 41° PW to ensure proper gapping options and allow for standard lofts in the traditional scoring wedges (45.5°, 54°, 56°, 58°). G430 Iron Features: Thinner face, lower CG for up to 2+ mph ball-speed increase Custom-engineered lofts for controlled distance Multi-material cavity badge improves feel Tungsten toe and shaft tip weights ensure forgiveness Hydropearl 2.0 chrome finish for consistency in wet conditions Loft Specifications Club Standard loft Retro spec Power spec 4-iron 19.0° 20.0° 18.0° 5-iron 22.0° 24.0° 21.0° 6-iron 25.5° 27.5° 24.0° 7-iron 29.0° 31.0° 27.5° 8-iron 33.0° 34.5° 31.5° 9-iron

GBP 639.00
2

Ping G430 Golf Irons - Graphite 6-PW+GW+SW ALTA CB Black Regular Right

Ping G430 Golf Irons - Graphite 6-PW+GW+SW ALTA CB Black Regular Right

Ping G430 Golf Irons - Graphite MORE DISTANCE. BETTER GAPPING. The G430 multi-material iron from PING Golf produces distance gains of approximately 7-10 yards and improved accuracy throughout the set. It’s the result of a complex design that combines a lower CG with stronger, custom engineered lofts and a thinner face that delivers up to 2 mph more ball speed – leading to significant distance gains without compromising PING’s famous forgiveness. A key contributor to the added distance is the PurFlex cavity badge, an innovation with seven flex zones that allows more free bending to increase ball speed across the face. In combination with a lower CG, the badge contributes to the solid feel and pleasing impact sound. The stronger lofts across the set resulted in the addition of a 41° PW to ensure proper gapping options and allow for standard lofts in the traditional scoring wedges (45.5°, 50°, 54°, 58°). Among the refinements to the overall shape is a shorter hosel, which creates a more compact, clean look and helps lower the CG, aligning it closer to the force line to increase ball speed and ensure solid impact, especially low on the face. Approximately 1° of additional bounce throughout the set provides clean turf interaction and pure strikes, minimising “heavy” shots that come up short. The high-density tungsten toe and shaft tip weights contribute to its high MOI and produce tighter dispersion patterns. The hydropearl 2.0 chrome finish delivers consistent performance from wet or dry grass. SHAPED FOR SUCCESS A look with a shorter hosel helps lower the CG and align it with the force line to increase ball speed and ensure solid impact, especially low on the face. PURFLEX Seven flex zones allow for more free bending to increase ball speed across the face for longer results with a solid feel and pleasing impact sound. FORGIVING SOLE DESIGN Approximately 1o additional bounce throughout the set ensures clean turf interaction and pure strikes, minimising “heav y” shotsthatcomeupshort. 2+ MPH FASTER FACE Hyper 17-4 stainless steel strengthens the face, allowing for more face flexing that generates increased distance and a higher max height to hold shots on the green. CUSTOM-ENGINEERED LOFTS Stronger lofts across the set resulted in the addition of a 41° PW to ensure proper gapping options and allow for standard lofts in the traditional scoring wedges (45.5°, 54°, 56°, 58°). G430 Iron Features: Thinner face, lower CG for up to 2+ mph ball-speed increase Custom-engineered lofts for controlled distance Multi-material cavity badge improves feel Tungsten toe and shaft tip weights ensure forgiveness Hydropearl 2.0 chrome finish for consistency in wet conditions Ping G430 iron loft specifications Club Standard loft Retro spec Power spec 4-iron 19.0° 20.0° 18.0° 5-iron 22.0° 24.0° 21.0° 6-iron 25.5° 27.5° 24.0° 7-iron 29.0° 31.0° 27.5° 8-iron 33.0° 34.5° 31.5° 9-iron

GBP 799.00
1

Ping G430 Golf Irons - Graphite 6-PW+GW+UW+SW ALTA CB Black Regular Right

Ping G430 Golf Irons - Graphite 6-PW+GW+UW+SW ALTA CB Black Regular Right

Ping G430 Golf Irons - Graphite MORE DISTANCE. BETTER GAPPING. The G430 multi-material iron from PING Golf produces distance gains of approximately 7-10 yards and improved accuracy throughout the set. It’s the result of a complex design that combines a lower CG with stronger, custom engineered lofts and a thinner face that delivers up to 2 mph more ball speed – leading to significant distance gains without compromising PING’s famous forgiveness. A key contributor to the added distance is the PurFlex cavity badge, an innovation with seven flex zones that allows more free bending to increase ball speed across the face. In combination with a lower CG, the badge contributes to the solid feel and pleasing impact sound. The stronger lofts across the set resulted in the addition of a 41° PW to ensure proper gapping options and allow for standard lofts in the traditional scoring wedges (45.5°, 50°, 54°, 58°). Among the refinements to the overall shape is a shorter hosel, which creates a more compact, clean look and helps lower the CG, aligning it closer to the force line to increase ball speed and ensure solid impact, especially low on the face. Approximately 1° of additional bounce throughout the set provides clean turf interaction and pure strikes, minimising “heavy” shots that come up short. The high-density tungsten toe and shaft tip weights contribute to its high MOI and produce tighter dispersion patterns. The hydropearl 2.0 chrome finish delivers consistent performance from wet or dry grass. SHAPED FOR SUCCESS A look with a shorter hosel helps lower the CG and align it with the force line to increase ball speed and ensure solid impact, especially low on the face. PURFLEX Seven flex zones allow for more free bending to increase ball speed across the face for longer results with a solid feel and pleasing impact sound. FORGIVING SOLE DESIGN Approximately 1o additional bounce throughout the set ensures clean turf interaction and pure strikes, minimising “heav y” shotsthatcomeupshort. 2+ MPH FASTER FACE Hyper 17-4 stainless steel strengthens the face, allowing for more face flexing that generates increased distance and a higher max height to hold shots on the green. CUSTOM-ENGINEERED LOFTS Stronger lofts across the set resulted in the addition of a 41° PW to ensure proper gapping options and allow for standard lofts in the traditional scoring wedges (45.5°, 54°, 56°, 58°). G430 Iron Features: Thinner face, lower CG for up to 2+ mph ball-speed increase Custom-engineered lofts for controlled distance Multi-material cavity badge improves feel Tungsten toe and shaft tip weights ensure forgiveness Hydropearl 2.0 chrome finish for consistency in wet conditions Ping G430 iron loft specifications Club Standard loft Retro spec Power spec 4-iron 19.0° 20.0° 18.0° 5-iron 22.0° 24.0° 21.0° 6-iron 25.5° 27.5° 24.0° 7-iron 29.0° 31.0° 27.5° 8-iron 33.0° 34.5° 31.5° 9-iron

GBP 919.00
1

Ping G430 Golf Irons - Graphite 6-PW+GW ALTA CB Black Regular Right

Ping G430 Golf Irons - Graphite 6-PW+GW ALTA CB Black Regular Right

Ping G430 Golf Irons - Graphite MORE DISTANCE. BETTER GAPPING. The G430 multi-material iron from PING Golf produces distance gains of approximately 7-10 yards and improved accuracy throughout the set. It’s the result of a complex design that combines a lower CG with stronger, custom engineered lofts and a thinner face that delivers up to 2 mph more ball speed – leading to significant distance gains without compromising PING’s famous forgiveness. A key contributor to the added distance is the PurFlex cavity badge, an innovation with seven flex zones that allows more free bending to increase ball speed across the face. In combination with a lower CG, the badge contributes to the solid feel and pleasing impact sound. The stronger lofts across the set resulted in the addition of a 41° PW to ensure proper gapping options and allow for standard lofts in the traditional scoring wedges (45.5°, 50°, 54°, 58°). Among the refinements to the overall shape is a shorter hosel, which creates a more compact, clean look and helps lower the CG, aligning it closer to the force line to increase ball speed and ensure solid impact, especially low on the face. Approximately 1° of additional bounce throughout the set provides clean turf interaction and pure strikes, minimising “heavy” shots that come up short. The high-density tungsten toe and shaft tip weights contribute to its high MOI and produce tighter dispersion patterns. The hydropearl 2.0 chrome finish delivers consistent performance from wet or dry grass. SHAPED FOR SUCCESS A look with a shorter hosel helps lower the CG and align it with the force line to increase ball speed and ensure solid impact, especially low on the face. PURFLEX Seven flex zones allow for more free bending to increase ball speed across the face for longer results with a solid feel and pleasing impact sound. FORGIVING SOLE DESIGN Approximately 1o additional bounce throughout the set ensures clean turf interaction and pure strikes, minimising “heav y” shotsthatcomeupshort. 2+ MPH FASTER FACE Hyper 17-4 stainless steel strengthens the face, allowing for more face flexing that generates increased distance and a higher max height to hold shots on the green. CUSTOM-ENGINEERED LOFTS Stronger lofts across the set resulted in the addition of a 41° PW to ensure proper gapping options and allow for standard lofts in the traditional scoring wedges (45.5°, 54°, 56°, 58°). G430 Iron Features: Thinner face, lower CG for up to 2+ mph ball-speed increase Custom-engineered lofts for controlled distance Multi-material cavity badge improves feel Tungsten toe and shaft tip weights ensure forgiveness Hydropearl 2.0 chrome finish for consistency in wet conditions Ping G430 iron loft specifications Club Standard loft Retro spec Power spec 4-iron 19.0° 20.0° 18.0° 5-iron 22.0° 24.0° 21.0° 6-iron 25.5° 27.5° 24.0° 7-iron 29.0° 31.0° 27.5° 8-iron 33.0° 34.5° 31.5° 9-iron

GBP 689.00
1

Ping G430 Golf Irons - Graphite Mens Right Regular ALTA CB Black 5-PW

Ping G430 Golf Irons - Graphite Mens Right Regular ALTA CB Black 5-PW

Ping G430 Golf Irons - Graphite MORE DISTANCE. BETTER GAPPING. The G430 multi-material iron from PING Golf produces distance gains of approximately 7-10 yards and improved accuracy throughout the set. It’s the result of a complex design that combines a lower CG with stronger, custom engineered lofts and a thinner face that delivers up to 2 mph more ball speed – leading to significant distance gains without compromising PING’s famous forgiveness. A key contributor to the added distance is the PurFlex cavity badge, an innovation with seven flex zones that allows more free bending to increase ball speed across the face. In combination with a lower CG, the badge contributes to the solid feel and pleasing impact sound. The stronger lofts across the set resulted in the addition of a 41° PW to ensure proper gapping options and allow for standard lofts in the traditional scoring wedges (45.5°, 50°, 54°, 58°). Among the refinements to the overall shape is a shorter hosel, which creates a more compact, clean look and helps lower the CG, aligning it closer to the force line to increase ball speed and ensure solid impact, especially low on the face. Approximately 1° of additional bounce throughout the set provides clean turf interaction and pure strikes, minimising “heavy” shots that come up short. The high-density tungsten toe and shaft tip weights contribute to its high MOI and produce tighter dispersion patterns. The hydropearl 2.0 chrome finish delivers consistent performance from wet or dry grass. SHAPED FOR SUCCESS A look with a shorter hosel helps lower the CG and align it with the force line to increase ball speed and ensure solid impact, especially low on the face. PURFLEX Seven flex zones allow for more free bending to increase ball speed across the face for longer results with a solid feel and pleasing impact sound. FORGIVING SOLE DESIGN Approximately 1o additional bounce throughout the set ensures clean turf interaction and pure strikes, minimising “heav y” shotsthatcomeupshort. 2+ MPH FASTER FACE Hyper 17-4 stainless steel strengthens the face, allowing for more face flexing that generates increased distance and a higher max height to hold shots on the green. CUSTOM-ENGINEERED LOFTS Stronger lofts across the set resulted in the addition of a 41° PW to ensure proper gapping options and allow for standard lofts in the traditional scoring wedges (45.5°, 54°, 56°, 58°). G430 Iron Features: Thinner face, lower CG for up to 2+ mph ball-speed increase Custom-engineered lofts for controlled distance Multi-material cavity badge improves feel Tungsten toe and shaft tip weights ensure forgiveness Hydropearl 2.0 chrome finish for consistency in wet conditions Ping G430 iron loft specifications Club Standard loft Retro spec Power spec 4-iron 19.0° 20.0° 18.0° 5-iron 22.0° 24.0° 21.0° 6-iron 25.5° 27.5° 24.0° 7-iron 29.0° 31.0° 27.5° 8-iron 33.0° 34.5° 31.5° 9-iron

GBP 689.00
1

Cobra King X Wedge Bundle Set - Satin 3 x Wedges Right

Cobra King X Wedge Bundle Set - Satin 3 x Wedges Right

Cobra King X Wedge Bundle - Satin Chrome The King X Wedges by Cobra are built for golfers seeking precision with added forgiveness. Made from soft 8620 carbon steel and formed using Metal Injection Molding (MIM) , these wedges offer premium feel and tighter manufacturing tolerances. A hollow cavity design and TPU insert deliver consistent strikes with a soft, satisfying impact--perfect for improving your short game. CONFIDENCE FROM EVERY LIE With the King X in your hands, you're free to take on every scoring opportunity. From tight lies to bunkers, the progressive teardrop grind gives you the freedom to be creative while maintaining control and reliability through the turf. ADVANCED MIM CONSTRUCTION The use of MIM technology creates a more refined grain structure compared to traditional casting, offering a softer feel and longer-lasting grooves. This precision process results in better performance and improved durability across the face. CAVITY BACK FOR FORGIVENESS Engineered with a hollow cavity and deep undercut , 20g of discretionary weight is moved to the perimeter, increasing forgiveness and stability on mishits. It's a confidence-boosting design built to support players looking to sharpen their short game. IMPACT FEEL YOU CAN TRUST A TPU insert behind the hitting area absorbs unwanted vibrations, producing a softer, more responsive sensation on every shot. Feel the difference in feedback, control, and touch around the greens. PROGRESSIVE TEARDROP SOLE The teardrop-inspired sole shape adapts to a variety of shots and lies, with added camber to improve turf interaction. Whether you're nipping a pitch from tight grass or sliding under a bunker shot, the sole design delivers confidence and playability Cobra King X Wedge Specifications Loft Bounce Grind Lie Angle Length Swing Weight Shaft Flex RH/LH 48.0° 10.0° Teardrop 65.0° 35.75" D2 S RH/LH* 50.0° 10.0° Teardrop 65.0° 35.75" D2 S RH/LH* 52.0° 10.0° Teardrop 65.0° 35.75" D3 S RH/LH* 54.0° 10.0° Teardrop 65.0° 35.50" D4 S RH/LH 56.0° 14.0°

GBP 387.00
1

Cobra King X Wedge Bundle Set - Satin 3 x Wedges Left

Cobra King X Wedge Bundle Set - Satin 3 x Wedges Left

Cobra King X Wedge Bundle - Satin Chrome The King X Wedges by Cobra are built for golfers seeking precision with added forgiveness. Made from soft 8620 carbon steel and formed using Metal Injection Molding (MIM) , these wedges offer premium feel and tighter manufacturing tolerances. A hollow cavity design and TPU insert deliver consistent strikes with a soft, satisfying impact--perfect for improving your short game. CONFIDENCE FROM EVERY LIE With the King X in your hands, you're free to take on every scoring opportunity. From tight lies to bunkers, the progressive teardrop grind gives you the freedom to be creative while maintaining control and reliability through the turf. ADVANCED MIM CONSTRUCTION The use of MIM technology creates a more refined grain structure compared to traditional casting, offering a softer feel and longer-lasting grooves. This precision process results in better performance and improved durability across the face. CAVITY BACK FOR FORGIVENESS Engineered with a hollow cavity and deep undercut , 20g of discretionary weight is moved to the perimeter, increasing forgiveness and stability on mishits. It's a confidence-boosting design built to support players looking to sharpen their short game. IMPACT FEEL YOU CAN TRUST A TPU insert behind the hitting area absorbs unwanted vibrations, producing a softer, more responsive sensation on every shot. Feel the difference in feedback, control, and touch around the greens. PROGRESSIVE TEARDROP SOLE The teardrop-inspired sole shape adapts to a variety of shots and lies, with added camber to improve turf interaction. Whether you're nipping a pitch from tight grass or sliding under a bunker shot, the sole design delivers confidence and playability Cobra King X Wedge Specifications Loft Bounce Grind Lie Angle Length Swing Weight Shaft Flex RH/LH 48.0° 10.0° Teardrop 65.0° 35.75" D2 S RH/LH* 50.0° 10.0° Teardrop 65.0° 35.75" D2 S RH/LH* 52.0° 10.0° Teardrop 65.0° 35.75" D3 S RH/LH* 54.0° 10.0° Teardrop 65.0° 35.50" D4 S RH/LH 56.0° 14.0°

GBP 387.00
1

Cobra King X Golf Wedges - Satin Chrome Mens Right Wedge True Temper Vector Tour 48 10

Cobra King X Golf Wedges - Satin Chrome Mens Right Wedge True Temper Vector Tour 48 10

Cobra King X Wedges - Satin Chrome The King X Wedges by Cobra are built for golfers seeking precision with added forgiveness. Made from soft 8620 carbon steel and formed using Metal Injection Molding (MIM) , these wedges offer premium feel and tighter manufacturing tolerances. A hollow cavity design and TPU insert deliver consistent strikes with a soft, satisfying impact--perfect for improving your short game. CONFIDENCE FROM EVERY LIE With the King X in your hands, you're free to take on every scoring opportunity. From tight lies to bunkers, the progressive teardrop grind gives you the freedom to be creative while maintaining control and reliability through the turf. ADVANCED MIM CONSTRUCTION The use of MIM technology creates a more refined grain structure compared to traditional casting, offering a softer feel and longer-lasting grooves. This precision process results in better performance and improved durability across the face. CAVITY BACK FOR FORGIVENESS Engineered with a hollow cavity and deep undercut , 20g of discretionary weight is moved to the perimeter, increasing forgiveness and stability on mishits. It's a confidence-boosting design built to support players looking to sharpen their short game. IMPACT FEEL YOU CAN TRUST A TPU insert behind the hitting area absorbs unwanted vibrations, producing a softer, more responsive sensation on every shot. Feel the difference in feedback, control, and touch around the greens. PROGRESSIVE TEARDROP SOLE The teardrop-inspired sole shape adapts to a variety of shots and lies, with added camber to improve turf interaction. Whether you're nipping a pitch from tight grass or sliding under a bunker shot, the sole design delivers confidence and playability Cobra King X Wedge Specifications Loft Bounce Grind Lie Angle Length Swing Weight Shaft Flex RH/LH 48.0° 10.0° Teardrop 65.0° 35.75" D2 S RH/LH* 50.0° 10.0° Teardrop 65.0° 35.75" D2 S RH/LH* 52.0° 10.0° Teardrop 65.0° 35.75" D3 S RH/LH* 54.0° 10.0° Teardrop 65.0° 35.50" D4 S RH/LH 56.0° 14.0° Teardr

GBP 139.00
1

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2519.00
1

3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 5-PW+GW

3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2519.00
1

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2519.00
1

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 1889.00
1

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 1889.00
1

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2519.00
1

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 1889.00
1

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 1889.00
1