577 results (0,22034 seconds)

Show all filters

Brand

Show all

Colour

Size

Show all

Gender

Merchant

Show all

Price (EUR)

Show all

Reset filter

Products
From
Shops

Empteezy Ltd 27 x 285mm Gas Cylinder Store

Empteezy Ltd 27 x 285mm Gas Cylinder Store

Gas Cylinder Store - GB30 For 27 Cylinders The base of this gas cylinder store is 3mm mild steel sheet, with RHS cross members and pressed ribs. The corner posts and mains rails are from rolled hollow section and the back and side panels are 2mm mild steel sheet, corrugated where needed. The sloping roof has been fitted with bracing and fully welded around the perimeter. The unit has crane-lifting points with a maximum gross weight of 2000kg, base plinths and a separate ramp to aid loading and unloading. To finish the unit has been shot blasted and painted to approximately 100 microns.

GBP 8999.99
1

Empteezy Ltd 32 x 205L or 8 x 1000LT + Walk-in Area Combination Steel Buned Store

Empteezy Ltd 32 x 205L or 8 x 1000LT + Walk-in Area Combination Steel Buned Store

Combination Store - CBS2 32 Drums With Walk-In Area The base is manufactured from 3mm mild steel sheet with RHS cross members and pressed ribs for additional strength. The main frame work is manufactured from rolled hollow section, while the back, sides and door panels are pressed from 2mm mild steel sheet corrugated where required. The roof is fitted with lifting eyes and fully welded around perimeter. Each end of the unit is fitted with lockable, sliding doors giving access to drum/IBC store areas and the shelved walk-in store (in the middle) is accessed via a hinged door on the side of the unit. The internal divides between the different areas is an open framework and the entire unit is protected by a fully seam welded sump which fully complies with all the current UK regulations relating to sump capacities. The sumps in both the walk-in store and drum/IBC storage areas are covered with galvanized steel grid mesh sections and pallets on the upper level of the drum/IBC store are placed directly onto a steel support frame. The underside of the unit is fitted with plinths to eliminate ground contact and reduce the risk of corrosion, prior to painting the unit is fully shot blasted to provide a clean and keyed surface. This model can hold a total of 32 x 205ltr drums or 8 x 1000ltr IBCs across two levels and will accommodate standard 1200mm x 1200mm, 1200mm x 1000mm and 1200mm x 800mm pallets, plus the walk-in area which contains shelving for small containers.

GBP 29999.99
1

Empteezy Ltd 72 x 25L Fully Bunded Walk-in 1 Hour Fire Rated Steel Bunded Store

Empteezy Ltd 72 x 25L Fully Bunded Walk-in 1 Hour Fire Rated Steel Bunded Store

1 Hour Fire Rated Store - CS2FR (To Hold 72 Containers With Floor Space) A rolled hollow welded frame creates a strong structure for this fire rated drum store. The walls, 1250mm wide hinged-doors and roof have been in-filled with Rockwool Firebatt insulation and covered with sheet steel to provide 1 hour fire rating. A 3mm fully seam welded sump, with profiled rib strengtheners, creates a bunded area in case of a spill and base plinths eliminate contact with the ground. High and low level vents fitted with intumescent elements allow air to circulate. However in the event of a fire, these elements will expand and seal the vents, this takes place at temperatures above 150C. Shelving is provided on both sides of the store, the bulkhead door, fitted with a single cam door gear mechanism, can be secured with a padlock (not supplied). The sump fully complies with all the UK regulations relating to sump capacities.

GBP 20999.99
1

Empteezy Ltd 108 x 205L Fully Bunded Walk-in 1 Hour Fire Rated Steel Bunded Store

Empteezy Ltd 108 x 205L Fully Bunded Walk-in 1 Hour Fire Rated Steel Bunded Store

1 Hour Fire Rated Store - CS6FR (To Hold 108 Containers With Floor Space) A rolled hollow welded frame creates a strong structure for this fire rated drum store. The walls, 1250mm wide hinged-doors and roof have been in-filled with Rockwool Firebatt insulation and covered with sheet steel to provide 1 hour fire rating. A 3mm fully seam welded sump, with profiled rib strengtheners, creates a bunded area in case of a spill and base plinths eliminate contact with the ground. High and low level vents fitted with intumescent elements allow air to circulate. However in the event of a fire, these elements will expand and seal the vents, this takes place at temperatures above 150C. Shelving is provided on both sides of the store and the bulkhead door, fitted with a single cam door gear mechanism, can be secured with a padlock (not supplied). The sump fully complies with all the UK regulations relating to sump capacities.

GBP 39999.99
1

Empteezy Ltd 4 x 205L Drum Store - DS1P

Empteezy Ltd 4 x 205L Drum Store - DS1P

Drum Store - DS1P For 4 Drums A 2mm pressed steel welded body construction provides the structural strength for this unit, while the roof which is fitted with lifting eyes is manufactured from 3mm mild steel. The two hinged doors are constructed from 2mm mild steel and are fitted with a rod and lock and a keyed handle. Constructed from 3mm mild steel, the sump is fully seam welded and fitted with pallet support beams onto which the pallet sits directly. The sump as you would expect complies fully with all current UK regulations relating to sump capacities and the underside is fitted with plinths to eliminate contact with ground and reduce the risk of corrosion. Prior to painting the unit is fully shot blasted to provide a clean and keyed surface. This model can hold up to 4 x 205ltr drums (1 pallet location) and will accommodate standard 1200mm x 1200mm, 1200mm x 1000mm and 1200mm x 800mm pallets. Chargeable Options: Air vents Galvanised steel grid mesh Galvanised steel pallet channels

GBP 4599.99
1

Empteezy Chemstor 20 x 25L Chemstor Steel Bunded Store

Empteezy Chemstor 20 x 25L Chemstor Steel Bunded Store

Chemstor Secure Store - CS5 To Hold 20 Containers The base of this unit is manufactured from 3mm mild steel sheet while the back, sides and door panels are pressed from 2mm mild steel sheet, which is corrugated as required for additional strength and the roof (fully welded around the perimeter) is pressed and fitted with suitable bracing. This model has double, hinged lockable (keyed handle) doors, high and low level louvre vents fitted with flame arrestor mesh, a single full length, full depth shelf and a fully seam welded sump which complies with all the current regulations relating to sump capacities (covered with galvanised steel grid mesh panels). The underside of the unit is fitted with forklift transport hoops which also help eliminate contact with ground and reduce the risk of corrosion. Prior to painting the unit is fully shot blasted to provide a clean and keyed surface. This model can hold up to 20 x 25ltr cans.

GBP 2999.99
1

Du Store Alpakka, alpaca wool yarn, "Alpakka Wool", green (518)

Du Store Alpakka, alpaca wool yarn, "Alpakka Wool", green (518)

Alpakka Wool is suitable for lighter and finer everyday garments. The yarn preserves the alpaca fibre’s softness and durability, while the wool gives elasticity and a fine texture. When you choose Alpakka Wool, you will get durable garments suitable for babies, children and adults. Alpakka Wool comes in many wonderful colours, from neutral natural tones and delicate pastels to clear, bright nuances and lovely retro colours.Alpakka Wool is suitable for Nordic colourwork patterns and other classic knitwear as well as cables, textured and lace patterns. Garments made from Alpakka Wool are suitable for both inside and outside wear. The yarn is good for shawls, scarves, gloves, wrist warmers, hats, and other accessories.Tip! Alpakka Wool can be felted. NOTE!: Remember that bleached white yarn CANNOT be felted (off-white is not bleached).Alpakka Wool has the same knitting tension as Mini Sterk and their respective patterns can be used with both yarn types.Every time you purchase yarn from Du Store Alpakka, you support the Mirasol school in Peru.

GBP 4.68
1

Empteezy Ltd 32 x 205L Steel Bunded Store - No Roof or Doors

Empteezy Ltd 32 x 205L Steel Bunded Store - No Roof or Doors

Indoor Bunded Store - IS32B For 32 Drums Designed for the safe and fully bunded indoor storage of 205ltr drums this model is manufactured from 3mm steel sheet with RHS cross members, pressed ribs and a heavy duty RHS end frame with 2mm corrugated panels. The fully seam welded sump which fully complies with all the current UK regulations relating to sump capacities is fitted with galvanised steel pallet channels (3 per pallet space), while pallets on the upper level sit directly onto a steel support frame. The underside of the unit is fitted with base plinths to eliminate contact with the ground and reduce the risk of corrosion and prior to painting the unit is fully shot blasted to provide a clean and keyed surface. This model can hold 32 x 205ltr drums. Chargeable options: Galvanised steel grid mesh

GBP 13999.99
1

Empteezy Ltd 8 x 205L Steel Bunded Store - No Roof or Doors

Empteezy Ltd 8 x 205L Steel Bunded Store - No Roof or Doors

Indoor Bunded Store - IS8B For 8 Drums Designed to provide safe, fully bunded storage for indoor application the base of this model is manufactured from 3mm steel sheet, RHS cross members, pressed ribs and a heavy duty RHS end frame with 2mm corrugated panels. The fully seam welded sump, which fully complies with all the current UK regulation relating to sump capacities is fitted with pallet support beams onto which the pallet sits directly and the underside of the unit is fitted with base plinths to eliminate contact with the ground and reduce the risk of corrosion. Prior to painting the unit is fully shot blasted to provide a clean and keyed surface. This model can hold 8 x 205ltr drums. Chargeable options: Galvanised steel grid mesh (the photo show this option) Galvanised steel pallet channels

GBP 5399.99
1

Empteezy Ltd 8 x 205L Fully Enclosed Steel Bunded Store

Empteezy Ltd 8 x 205L Fully Enclosed Steel Bunded Store

Bunded Store - DS2P To Hold 8 Drums A 2mm pressed steel welded body construction provides the structural strength for this unit, while the roof which is fitted with lifting eyes is manufactured from 3mm mild steel. The two hinged doors are constructed from 2mm mild steel and are fitted with a rod and level lock with a keyed handle. Constructed from 3mm mild steel, the sump is fully seam welded and fitted with pallet support beams for the pallet to sit directly on to and pallets on the upper level sit directly on to a steel support frame. The sump as you would expect complies fully with all current UK regulations relating to sump capacities and the underside is fitted with plinths to eliminate contact with ground and reduce the risk of corrosion. Prior to painting the unit is fully shot blasted to provide a clean and keyed surface. This model can hold up to 8 x 205ltr drums (2 pallet location) across two levels and will accommodate standard 1200mm x 1200mm, 1200mm x 1000mm and 1200mm x 800mm pallets. Chargeable Options: Air vents Galvanised steel grid mesh Galvanised steel pallet channels

GBP 7999.99
1

Empteezy Ltd 16 x 205L Steel Bunded Store - No Roof or Doors

Empteezy Ltd 16 x 205L Steel Bunded Store - No Roof or Doors

Indoor Bunded Store - IS16B For 16 Drums Designed for the safe and fully bunded storage of 205ltr drums in indoor applications the base of this model is manufactured from 3mm steel sheet with RHS cross members and pressed ribs and a heavy duty RHS end frame with 2mm corrugated panels. The fully seam welded sump which fully complies with all the current UK regulations relating to sump capacities is fitted with galvanised steel pallet channels (3 per pallet space), while pallets on the upper level sit directly onto a steel support frame. The underside of the unit is fitted with base plinths to eliminate contact with the ground and reduce the risk of corrosion and prior to painting the unit is fully shot blasted to provide a clean and keyed surface. This model can hold 16 x 205ltr drums. Chargeable options: Galvanised steel grid mesh

GBP 8299.99
1

Empteezy Ltd 16 x 205L or 4 x 1000L Fully Enclosed 1 Hour Fire Rated Steel Buned Store

Empteezy Ltd 16 x 205L or 4 x 1000L Fully Enclosed 1 Hour Fire Rated Steel Buned Store

1 Hour Fire Rated Drum Store - DPU16-4FR To Hold 16 Drums Or 4 IBCS A rolled hollow welded frame creates a strong structure for this fire rated drum store. The walls, two hinged-doors and roof have been in-filled with Rockwool Firebatt insulation and covered with sheet steel to provide 1 hour fire rating. A fully seam welded sump, with profiled rib straighteners and galvanised support channels, creates a bunded area in case of a spill, and base plinths eliminate contact with the ground. High and low level vents fitted with intumescent elements allow air to circulate, however in the event of a fire, these elements will expand and seal the vents, this takes place at temperatures above 150C. This unit can hold up to sixteen 205ltr drums (4 pallet locations) or four 1000ltr IBCs on two levels. The sump fully complies with all the UK regulations relating to sump capacities. Empteezy have tested the components used in their fire rated stores in conjunction with Bodycote Warrington Fire Consulting to ensure full compliance with BS EN 1634-1: 2000 (report certificate number 160129).

GBP 21999.99
1

Empteezy Ltd 32 x 205L or 8 x 1000L Fully Enclosed 1 Hour Fire Rated Steel Buned Store

Empteezy Ltd 32 x 205L or 8 x 1000L Fully Enclosed 1 Hour Fire Rated Steel Buned Store

1 Hour Fire Rated Drum Store - DPU32-8FR To Hold 32 Drums Or 8 IBCS A rolled hollow welded frame creates a strong structure for this fire rated drum store. The walls, four hinged-doors and roof have been in-filled with Rockwool Firebatt insulation and covered with sheet steel to provide 1 hour fire rating. A fully seam welded sump fitted with galvanised support channels, with profiled rib strengtheners, creates a bunded area in case of a spill, and base plinths eliminate contact with the ground. High and low level vents fitted with intumescent elements allow air to circulate, however in the event of a fire, these elements will expand and seal the vents, this takes place at temperatures above 150. This unit can hold up to thirty-two 205ltr drums (8 pallet locations) or eight 1000ltr IBCs on two levels. The sump fully complies with all the UK regulations relating to sump capacities. Empteezy have tested the components used in their fire rated stores in conjunction with Bodycote Warrington Fire Consulting to ensure full compliance with BS EN 1634-1: 2000 (report certificate number 160129).

GBP 43999.99
1

Empteezy Ltd 12 x 205L (Horizontal) Steel Bunded Store - No Roof, Doors or Back Wall

Empteezy Ltd 12 x 205L (Horizontal) Steel Bunded Store - No Roof, Doors or Back Wall

Indoor Bunded Store - IS12H For 12 Drums Designed for the safe and fully bunded indoor storage of horizontal 205ltr drums across three levels, the base of this model is manufactured from 3mm steel sheet with RHS cross members, pressed ribs and a heavy duty RHS end frame with 2mm corrugated panels. Above the fully seam welded sump, which fully complies with all the current UK regulations relating to sump capacities are three levels of drum racks (four horizontal drum per level) which are fitted across the back with safety stop rails to stop drums from being pushed through and falling off. The underside of the unit is fitted with base plinths to eliminate contact with the ground and reduce the risk of corrosion and prior to painting the unit is fully shot blasted to provide a clean and keyed surface. This model can hold 12 x 205ltr drums.

GBP 7999.99
1

Empteezy Chemstor 108X 25L Fully Bunded Walk-in Steel Bunded Store

Empteezy Chemstor 108X 25L Fully Bunded Walk-in Steel Bunded Store

Walk-In Store - CS6 To Hold 108 Containers With Floor Space A 2mm pressed steel welded body construction provides the structural strength for this unit, while the roof which is fitted with lifting eyes is manufactured from 3mm mild steel. The hinged personnel door is constructed from 2mm mild steel and is fitted with cam-lock gear system like those found on shipping containers, which when fitted with the appropriate padlock (not supplied) provides excellent security. As standard the unit is also fitted with high and low level louvre vents complete with flame arrestor mesh. Constructed from 3mm mild steel, the sump is fully seam welded and fitted with profiled rib strengtheners and covered with galvanised steel grid mesh panels. The capacity of the sump fully complies with all current UK regulations relating to sump capacities and the underside of the unit is fitted with plinths to eliminate contact with ground and reduce the risk of corrosion. Prior to painting the unit is fully shot blasted to provide a clean and keyed surface. The unit is fitted with 3 sets of racking; one on the end wall to the right as you enter the unit, one on the front and one on the back wall opposite each other and each set of racking is fitted with 2 sets of height adjustable grid mesh shelves. This model can hold up to 108 x 25ltr cans on the shelving provided (including the floor under the shelving, plus the free space in the rest of the unit.

GBP 24999.99
1

Empteezy Ltd 4 x Vertical, 4 x Horizontal + Shelf Steel Fully Enclosed Bunded Store

Empteezy Ltd 4 x Vertical, 4 x Horizontal + Shelf Steel Fully Enclosed Bunded Store

Drum Store - DS8VH To Hold 8 Drums A 2mm pressed steel welded body construction provides the structural strength for this unit, while the roof which is fitted with lifting eyes is manufactured from 3mm mild steel. The two easy glide sliding doors are constructed from 2mm mild steel and are fitted with a central lock and padlock points (padlocks not supplied). Constructed from 3mm mild steel, the sump is fully seam welded and is as you would expect fully compliant with all current UK regulations relating to sump capacities and the underside is fitted with plinths to eliminate contact with ground and reduce the risk of corrosion. This model holds four 205ltr drums horizontally in cradles on two levels, four 205ltr drums vertically on pallet support beams and has a shelf fitted above the vertical drums for small containers. Prior to painting the unit is fully shot blasted to provide a clean and keyed surface. This model can hold 4 x 205ltr drums in the vertical and 4 x 205ltr drums in the horizontal

GBP 9399.99
1

Empteezy Ltd 1 x 1000L or 4 x 205L Drums Fully Enclosed Steel Buned Store

Empteezy Ltd 1 x 1000L or 4 x 205L Drums Fully Enclosed Steel Buned Store

Drum & IBC Store - DPU4-1 1470ltr Sump Capacity A 2mm pressed steel welded body construction provides the structural strength for this unit, while the roof which is fitted with lifting eyes is manufactured from 3mm mild steel. The two hinged doors are constructed from 2mm mild steel and are fitted with a rod and lever locking mechanism with keyed handle. Constructed from 3mm mild steel, the sump is fully seam welded and fitted with pallet support beams onto which the pallet sits directly. The sump as you would expect complies fully with all current UK regulations relating to sump capacities and the underside is fitted with plinths to eliminate contact with ground and reduce the risk of corrosion. Prior to painting the unit is fully shot blasted to provide a clean and keyed surface. This model can hold up to 4 x 205ltr or 1 x 1000ltr IBC (1 pallet location) and will accommodate standard 1200mm x 1200mm, 1200mm x 1000mm and 1200mm x 800mm pallets.

GBP 7199.99
1

Empteezy Chemstor 72 x 25L Fully Bunded Walk-in Steel Bunded Store

Empteezy Chemstor 72 x 25L Fully Bunded Walk-in Steel Bunded Store

Walk-In Store - CS1 To Hold 72 Containers A 2mm pressed steel welded body construction provides the structural strength for this unit, while the roof which is fitted with lifting eyes is manufactured from 3mm mild steel. The hinged personnel door is constructed from 2mm mild steel and is fitted with cam-lock gear system like those found on shipping containers, which when fitted with the appropriate padlock (not supplied) provides excellent security. As standard the unit is also fitted with high and low level louvre vents complete with flame arrestor mesh. Constructed from 3mm mild steel, the sump is fully seam welded and fitted with profiled rib strengtheners and covered with galvanised steel grid mesh panels. The capacity of the sump fully complies with all current UK regulations relating to sump capacities and the underside of the unit is fitted with plinths to eliminate contact with ground and reduce the risk of corrosion. Prior to painting the unit is fully shot blasted to provide a clean and keyed surface. The unit is fitted with 2 sets of racking; one either side of the door and each set of racking is fitted with 2 sets of height adjustable grid mesh shelves. This model can hold up to 72x 25ltr cans on the shelving provided (including the floor under the shelving.

GBP 11999.99
1

Empteezy Ltd 16 x 205L or 4 x 1000L Fully Enclosed Steel Buned Store

Empteezy Ltd 16 x 205L or 4 x 1000L Fully Enclosed Steel Buned Store

Drum & IBC Store - DPU16-4 To Hold 16 Drums Or 4 IBC The base of this unit is manufactured from 3mm mild steel sheet and uses RHS cross members and pressed ribs for additional strength. All the corner posts and shelves, main rails and cross members are manufactured from rolled hollow section and the back, sides and door panels are pressed from 2mm mild steel sheet which is corrugated where required. The sloping roof is pressed and fitted with suitable bracing, welded around the perimeter and fitted with crane lifting points, and the double steel sliding doors run on easy glide track. Constructed from 3mm mild steel, the sump is fully seam welded and fitted with galvanised steel pallet channels (3 per pallet space). The sump as you would expect complies fully with all current UK regulations relating to sump capacities and the underside is fitted with plinths to eliminate contact with ground and reduce the risk of corrosion. Pallets on the upper level sit directly onto a steel support frame and prior to painting the unit is fully shot blasted to provide a clean and keyed surface. This model can hold up to 16 x 205ltr drums (4 pallet locations) or 4 x 1000ltr IBCs across two levels and will accommodate standard 1200mm x 1200mm, 1200mm x 1000mm and 1200mm x 800mm pallets.

GBP 14499.99
1

Empteezy Ltd 96 x 205L or 24 x 1000L Fully Enclosed Steel Bunded Store

Empteezy Ltd 96 x 205L or 24 x 1000L Fully Enclosed Steel Bunded Store

Drum & IBC Store - DPU96-24 To Hold 96 Drums Or 24 IBC The base of this unit is manufactured from 3mm mild steel sheet and uses RHS cross members and pressed ribs for additional strength. All the corner posts and shelves, main rails and cross members are manufactured from rolled hollow section and the back, sides and door panels are pressed from 2mm mild steel sheet which is corrugated where required. The sloping roof is pressed and fitted with suitable bracing, welded around the perimeter and fitted with crane lifting points, and the six steel sliding doors run on easy glide track. Constructed from 3mm mild steel, the sump is fully seam welded and fitted with galvanised steel pallet channels (3 per pallet space). The sump as you would expect complies fully with all current UK regulations relating to sump capacities and the underside is fitted with plinths to eliminate contact with ground and reduce the risk of corrosion. Pallets on the upper level sit directly onto a steel support frame and prior to painting the unit is fully shot blasted to provide a clean and keyed surface. This model can hold up to 96 x 205ltr drums or 24 x 1000ltr IBCs across two levels and will accommodate standard 1200mm x 1200mm, 1200mm x 1000mm and 1200mm x 800mm pallets.

GBP 46999.99
1