557 results (0,23177 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

York 75MM Quick Change Surface Conditioning Discs - Non Woven - V-Fine

York 75MM Quick Change Surface Conditioning Discs - Non Woven - V-Fine

Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Features and Benefits Compatible with the 3M ROLOC system holders Leaves a burr-free surface ready for painting or coating For cleaning, blending and finishing on all metals Used for the removal of light rust, oxides and coatings Requires suitable disc holder sold separately

GBP 0.00
1

York 50MM Quick Change Surface Conditioning Discs - Non Woven - Medium

York 50MM Quick Change Surface Conditioning Discs - Non Woven - Medium

Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Features and Benefits Compatible with the 3M ROLOC system holders Leaves a burr-free surface ready for painting or coating For cleaning, blending and finishing on all metals Used for the removal of light rust, oxides and coatings Requires suitable disc holder sold separately

GBP 1.02
1

York 75MM Quick Change Surface Conditioning Discs - Non Woven - Coarse

York 75MM Quick Change Surface Conditioning Discs - Non Woven - Coarse

Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Features and Benefits Compatible with the 3M ROLOC system holders Leaves a burr-free surface ready for painting or coating For cleaning, blending and finishing on all metals Used for the removal of light rust, oxides and coatings Requires suitable disc holder sold separately

GBP 1.73
1

York 75MM Quick Change Surface Conditioning Discs - Non Woven - Medium

York 75MM Quick Change Surface Conditioning Discs - Non Woven - Medium

Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Features and Benefits Compatible with the 3M ROLOC system holders Leaves a burr-free surface ready for painting or coating For cleaning, blending and finishing on all metals Used for the removal of light rust, oxides and coatings Requires suitable disc holder sold separately

GBP 1.69
1

York 50MM Quick Change Surface Conditioning Discs - Non Woven - V-Fine

York 50MM Quick Change Surface Conditioning Discs - Non Woven - V-Fine

Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Features and Benefits Compatible with the 3M ROLOC system holders Leaves a burr-free surface ready for painting or coating For cleaning, blending and finishing on all metals Used for the removal of light rust, oxides and coatings Requires suitable disc holder sold separately

GBP 1.02
1

York 50MM Quick Change Surface Conditioning Discs - Non Woven - Coarse

York 50MM Quick Change Surface Conditioning Discs - Non Woven - Coarse

Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Features and Benefits Compatible with the 3M ROLOC system holders Leaves a burr-free surface ready for painting or coating For cleaning, blending and finishing on all metals Used for the removal of light rust, oxides and coatings Requires suitable disc holder sold separately

GBP 1.02
1

York 3 X 14MM Cylindrical Ball Nosed Carbide Rotary Burr - Cut 9 Chip Breaker (3MM Shank)

York 3 X 14MM Cylindrical Ball Nosed Carbide Rotary Burr - Cut 9 Chip Breaker (3MM Shank)

Cut-9 cylindrical ball nosed rotary burrs feature the cut-9 chipbreaker for fast stock removal. improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron up to HRC65 hardness. Features and Benefits Cut-9 chipbreaker for fast stock removal and improved chip control Carbide construction for improved hardness and strength Typical Applications Deburring Steel alloy Cast iron Notes Work piece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr

GBP 3.99
1

12.7X25MM Round Tree Carbide Burr Dbl Cut

12.7X25MM Round Tree Carbide Burr Dbl Cut

Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Features and Benefits Hard carbide construction for increased cutting hardness Crosscut and double for improved chip control and chipbreaks Suitable for deburring and polishing of materials up to HRC65 hardness Typical Applications Deburring Polishing Please note: Work piece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr

GBP 0.00
1

York 3 X 6.3MM Flame Shape Carbide Rotary Burr - Cut 6 Double Cut (3MM Shank)

York 3 X 6.3MM Flame Shape Carbide Rotary Burr - Cut 6 Double Cut (3MM Shank)

Cut 6 crosscut and double cut burrs to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Features and Benefits Hard tungsten carbide construction for improved cutting hardness Cut 6 crosscut and double cut profile for improved control of chips Ideal for general purpose machining Typical Applications Deburring Polishing Notes Work piece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr

GBP 0.00
1

York 3 X 12.7MM Round Tree Carbide Rotary Burr - Cut 6 Double Cut (3MM Shank)

York 3 X 12.7MM Round Tree Carbide Rotary Burr - Cut 6 Double Cut (3MM Shank)

Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Features and Benefits Hard carbide construction for increased cutting hardness Crosscut and double for improved chip control and chipbreaks Suitable for deburring and polishing of materials up to HRC65 hardness Typical Applications Deburring Polishing Please note: Work piece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr

GBP 3.59
1

York 3 X 6.3MM Flame Shape Carbide Rotary Burr - Cut 9 Chipbreaker (3MM Shank)

York 3 X 6.3MM Flame Shape Carbide Rotary Burr - Cut 9 Chipbreaker (3MM Shank)

Cut 9 - Chipbreaker chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Features and Benefits Hard carbide construction for improved cutting hardness Cut 9 chip breaker for improved chip control Excellent wear resistance Typical Applications Deburring Grinding Polishing Notes Work piece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr

GBP 2.99
1

York 6 x 8mm Inverted Cone Carbide Rotary Burr Cut 9 - Chipbreaker

York 6 x 8mm Inverted Cone Carbide Rotary Burr Cut 9 - Chipbreaker

Inverted Cone. All sizes are nominal with a 6mm shank unless other wise stated. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Work piece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 0.00
1

16X25MM Conical Shape Carbide Burr Dbl Cut

16X25MM Conical Shape Carbide Burr Dbl Cut

Conical Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Work piece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 0.00
1

8X19MM Cylindrical Ball Nosed Carbide Burr Dbl Cut

8X19MM Cylindrical Ball Nosed Carbide Burr Dbl Cut

Cut 6 cylindrical ball nosed rotary burrs feature crosscut and double cut profile to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel, up to HRC65 hardness. Features and Benefits Tungsten carbide construction for improved hardness and strength Crosscut and double cut profile to improve and control chipbreaks Typical Applications Deburring Steel Cast iron Please note: Work piece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr. Additional Image for illustration purposes only

GBP 0.00
1

York 3X11MM Conical Shape Carbide Rotary Burr - Cut 6 Double Cut (3MM Shank)

York 3X11MM Conical Shape Carbide Rotary Burr - Cut 6 Double Cut (3MM Shank)

Conical Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Work piece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 3.09
1

York 3 X1 2.7MM Pointed Tree Carbide Rotary Burr - Cut 6 Double Cut (3MM Shank)

York 3 X1 2.7MM Pointed Tree Carbide Rotary Burr - Cut 6 Double Cut (3MM Shank)

Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Work piece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 2.49
1

York 3 X 11MM Conical Shape Carbide Rotary Burr - Cut 9 Chipbreaker (3MM Shank)

York 3 X 11MM Conical Shape Carbide Rotary Burr - Cut 9 Chipbreaker (3MM Shank)

Conical Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Work piece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 3.69
1

3x York 115 X 22MM Flap Disc - Conical - Zirconium - Fibre Backed P40

3x York 115 X 22MM Flap Disc - Conical - Zirconium - Fibre Backed P40

York conical flap discs are a high performance alternative to sanding discs with the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. The overlapped abrasive material wear away revealing fresh abrasive, ensuring the discs always cuts effectively and reduces clogging and providing a consistent finish throughout the disc life. The fibre backing allows for use without backing pads and makes the discs safe to use on any grinder up 80m/s speeds. Features and Benefits Overlapped abrasive material wear away to reveal fresh abrasive ensuring effective cuts and reduces clogging Fibre backing allows for use without backing pads and makes the discs safe for use on any grinder

GBP 2.37
1