2.492 results (0,15948 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Watco Flowtop Spiked Shoes - XSPSHNC

Watco Flowtop Spiked Shoes - XSPSHNC

Images for illustration purposes only Flowtop Spiked Shoes Our one size fits all spiked shoes are ideal for the application of Watco coatings and specifically Flowtop and Resiflow. Avoid trapping yourself in the corner or make spike rollering easy by wearing these shoes, which allow you to walk on the coating without marking the finish. Black plastic sole, with nylon straps and metal spikes. The surface should not be walked on once the coating begins to dry, otherwise the product will start to cure and the spike marks will not disappear. Care should also be taken not to tread wet primer or the mixed components onto surrounding surfaces.

GBP 59.99
1

Watco Safety Grip Safety Yellow 5m2

Watco Safety Grip Safety Yellow 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Safety Blue 5m2

Watco Safety Grip Safety Blue 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Safety Green 5m2

Watco Safety Grip Safety Green 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Cold Cure Safety Yellow 5m2

Watco Safety Grip Cold Cure Safety Yellow 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 189.99
1

Watco Safety Grip Cold Cure Safety Green 5m2

Watco Safety Grip Cold Cure Safety Green 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 189.99
1

Watco Safety Grip Cold Cure Safety Blue 5m2

Watco Safety Grip Cold Cure Safety Blue 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 189.99
1

6x Watco Safety Grip Safety Yellow 5m2 Sgsye

6x Watco Safety Grip Safety Yellow 5m2 Sgsye

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 959.94
1

6x Watco Safety Grip Safety Green 5m2 Sgsgn

6x Watco Safety Grip Safety Green 5m2 Sgsgn

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 959.94
1

6x Watco Safety Grip Safety Blue 5m2 Sgsbl

6x Watco Safety Grip Safety Blue 5m2 Sgsbl

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 959.94
1

6x Watco Safety Grip Cold Cure Safety Green 5m2 Sgccsgn

6x Watco Safety Grip Cold Cure Safety Green 5m2 Sgccsgn

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 1019.94
1

6x Watco Safety Grip Cold Cure Safety Blue 5m2 Sgccblu

6x Watco Safety Grip Cold Cure Safety Blue 5m2 Sgccblu

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 1019.94
1

6x Watco Safety Grip Cold Cure Safety Yellow 5m2 Sgccsyel

6x Watco Safety Grip Cold Cure Safety Yellow 5m2 Sgccsyel

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 1019.94
1

Watco Safety Tape Edge Sealer 140ml

Watco Safety Tape Edge Sealer 140ml

Images for illustration purposes only One tube of Watco Safety Tape Edge Sealer will seal the edges of the following when applied to the edges of any Surestep or Safety Tape product: Safety Tape - 1 x 18.3m roll in all widths from 25mm up to 150mm Surestep Treads - 23 pieces of 150mm x 610mm Surestep Tiles - 62 pieces of 140mm x 140mm Surestep Roll - 2 rolls of 610mm x 9.1m or 1m x 610mm Note: this product is especially useful for areas with heavy machinery that may move over tape frequently, reducing the chance of the tape lifting.

GBP 39.99
1

Watco Safety Tape Primer 500ml (Solvent Based)

Watco Safety Tape Primer 500ml (Solvent Based)

Images for illustration purposes only Solvent Based Tape Primer gives better adhesion on poor surfaces. Apply just one coat by brush and allow to dry (for about one hour) before applying Watco Surestep range or Safety Tapes (not recommended for use with barefoot grade) A 500ml unit of primer is sufficient for the following: Safety Tape - 2 rolls of 50mm x 18.3m Safety Tape - 1 roll of 100mm x 18.3m or 1 roll of 150mm x 18.3m Surestep Treads - 27 pieces of 150mm x 610mm Surestep Tiles - 125 pieces of 140mm x 140mm

GBP 41.99
1

Watco Safety Tape Transparent, 18m X 25mm

Watco Safety Tape Transparent, 18m X 25mm

Images for illustration purposes only Watco Safety Tapes are supplied in an extensive range of widths, colours, grades and styles. Along with the standard safety tapes various other versions are available. Recommended areas of use This anti slip tape is an easy and highly effective way to improve safety Use on concrete, brick, timber, stone, metal and painted surfaces. Features Tough aluminium oxide grit for great slip resistance and long life Ideal for indicating hazardous areas or safe escape routes Long lasting and consistent colour - Custom colours are available in rolls of any size up to 1m wide x 18m long with a minimum order of 1000m When used externally we suggest that this product is used with Safety Tape Primer Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations

GBP 39.99
1

Watco Safety Tape Blue, 18m X 25mm

Watco Safety Tape Blue, 18m X 25mm

Images for illustration purposes only Watco Safety Tapes are supplied in an extensive range of widths, colours, grades and styles. Along with the standard safety tapes various other versions are available. Recommended areas of use This anti slip tape is an easy and highly effective way to improve safety Use on concrete, brick, timber, stone, metal and painted surfaces. Features Tough aluminium oxide grit for great slip resistance and long life Ideal for indicating hazardous areas or safe escape routes Long lasting and consistent colour - Custom colours are available in rolls of any size up to 1m wide x 18m long with a minimum order of 1000m When used externally we suggest that this product is used with Safety Tape Primer Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations

GBP 39.99
1

Watco Safety Tape Red, 18m X 500mm

Watco Safety Tape Red, 18m X 500mm

Images for illustration purposes only Watco Safety Tapes are supplied in an extensive range of widths, colours, grades and styles. Along with the standard safety tapes various other versions are available. Recommended areas of use This anti slip tape is an easy and highly effective way to improve safety Use on concrete, brick, timber, stone, metal and painted surfaces. Features Tough aluminium oxide grit for great slip resistance and long life Ideal for indicating hazardous areas or safe escape routes Long lasting and consistent colour - Custom colours are available in rolls of any size up to 1m wide x 18m long with a minimum order of 1000m When used externally we suggest that this product is used with Safety Tape Primer Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations

GBP 499.99
1

Watco Safety Tape White, 18m X 150mm

Watco Safety Tape White, 18m X 150mm

Images for illustration purposes only Watco Safety Tapes are supplied in an extensive range of widths, colours, grades and styles. Along with the standard safety tapes various other versions are available. Recommended areas of use This anti slip tape is an easy and highly effective way to improve safety Use on concrete, brick, timber, stone, metal and painted surfaces. Features Tough aluminium oxide grit for great slip resistance and long life Ideal for indicating hazardous areas or safe escape routes Long lasting and consistent colour - Custom colours are available in rolls of any size up to 1m wide x 18m long with a minimum order of 1000m When used externally we suggest that this product is used with Safety Tape Primer Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations

GBP 159.99
1

Watco Safety Tape Brown, 18m X 25mm

Watco Safety Tape Brown, 18m X 25mm

Images for illustration purposes only Watco Safety Tapes are supplied in an extensive range of widths, colours, grades and styles. Along with the standard safety tapes various other versions are available. Recommended areas of use This anti slip tape is an easy and highly effective way to improve safety Use on concrete, brick, timber, stone, metal and painted surfaces. Features Tough aluminium oxide grit for great slip resistance and long life Ideal for indicating hazardous areas or safe escape routes Long lasting and consistent colour - Custom colours are available in rolls of any size up to 1m wide x 18m long with a minimum order of 1000m When used externally we suggest that this product is used with Safety Tape Primer Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations

GBP 39.99
1

Watco Safety Tape White, 18m X 500mm

Watco Safety Tape White, 18m X 500mm

Images for illustration purposes only Watco Safety Tapes are supplied in an extensive range of widths, colours, grades and styles. Along with the standard safety tapes various other versions are available. Recommended areas of use This anti slip tape is an easy and highly effective way to improve safety Use on concrete, brick, timber, stone, metal and painted surfaces. Features Tough aluminium oxide grit for great slip resistance and long life Ideal for indicating hazardous areas or safe escape routes Long lasting and consistent colour - Custom colours are available in rolls of any size up to 1m wide x 18m long with a minimum order of 1000m When used externally we suggest that this product is used with Safety Tape Primer Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations

GBP 499.99
1

Watco Safety Tape Transparent, 18m X 150mm

Watco Safety Tape Transparent, 18m X 150mm

Images for illustration purposes only Watco Safety Tapes are supplied in an extensive range of widths, colours, grades and styles. Along with the standard safety tapes various other versions are available. Recommended areas of use This anti slip tape is an easy and highly effective way to improve safety Use on concrete, brick, timber, stone, metal and painted surfaces. Features Tough aluminium oxide grit for great slip resistance and long life Ideal for indicating hazardous areas or safe escape routes Long lasting and consistent colour - Custom colours are available in rolls of any size up to 1m wide x 18m long with a minimum order of 1000m When used externally we suggest that this product is used with Safety Tape Primer Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations

GBP 159.99
1

Watco Safety Tape Yellow, Coarse Grade, 18mx50mm

Watco Safety Tape Yellow, Coarse Grade, 18mx50mm

Images for illustration purposes only Watco Safety Tapes are supplied in an extensive range of widths, colours, grades and styles. Along with the standard safety tapes various other versions are available. Recommended areas of use This anti slip tape is an easy and highly effective way to improve safety Use on concrete, brick, timber, stone, metal and painted surfaces. Features Tough aluminium oxide grit for great slip resistance and long life Ideal for indicating hazardous areas or safe escape routes Long lasting and consistent colour - Custom colours are available in rolls of any size up to 1m wide x 18m long with a minimum order of 1000m When used externally we suggest that this product is used with Safety Tape Primer Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations

GBP 65.99
1

Watco Safety Tape Brown, 18m X 500mm

Watco Safety Tape Brown, 18m X 500mm

Images for illustration purposes only Watco Safety Tapes are supplied in an extensive range of widths, colours, grades and styles. Along with the standard safety tapes various other versions are available. Recommended areas of use This anti slip tape is an easy and highly effective way to improve safety Use on concrete, brick, timber, stone, metal and painted surfaces. Features Tough aluminium oxide grit for great slip resistance and long life Ideal for indicating hazardous areas or safe escape routes Long lasting and consistent colour - Custom colours are available in rolls of any size up to 1m wide x 18m long with a minimum order of 1000m When used externally we suggest that this product is used with Safety Tape Primer Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations

GBP 499.99
1