50 results (0,14934 seconds)

Show all filters

Brand

Colour

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Watco Heavy Duty Line Marking Tape 50mm X 30M Red

Watco Heavy Duty Line Marking Tape 50mm X 30M Red

Images for illustration purposes onlyLine marking tape is hard wearing and durable. Made from 1mm thick PVC with chamfered edges to reduce scuffing and lifting. High performance self adhesive backing is coated edge to edge to reduce any edge lift. Easy to clean and is quick and simple to apply by hand.FeaturesQuick and simple to apply by handHard wearing and durableMade from 1mm thick PVC with chamfered edges to reduce scuffing and liftingHigh performance self adhesive backingThe adhesive is coated edge to edge to reduce any edge liftEasy to cleanThe photoluminescent grade is off-white and translucent in the light. Once the lights go off, it glows for up to 30 minutes with a yellow/green colour, showing safe exit routes or hazardous areas.

GBP 189.99
1

Watco Heavy Duty Line Marking Tape 75mm X 30M Red

Watco Heavy Duty Line Marking Tape 75mm X 30M Red

Images for illustration purposes onlyLine marking tape is hard wearing and durable. Made from 1mm thick PVC with chamfered edges to reduce scuffing and lifting. High performance self adhesive backing is coated edge to edge to reduce any edge lift. Easy to clean and is quick and simple to apply by hand.FeaturesQuick and simple to apply by handHard wearing and durableMade from 1mm thick PVC with chamfered edges to reduce scuffing and liftingHigh performance self adhesive backingThe adhesive is coated edge to edge to reduce any edge liftEasy to cleanThe photoluminescent grade is off-white and translucent in the light. Once the lights go off, it glows for up to 30 minutes with a yellow/green colour, showing safe exit routes or hazardous areas.

GBP 269.99
1

Watco Heavy Duty Line Marking Tape 100mm X 30M Red

Watco Heavy Duty Line Marking Tape 100mm X 30M Red

Images for illustration purposes onlyLine marking tape is hard wearing and durable. Made from 1mm thick PVC with chamfered edges to reduce scuffing and lifting. High performance self adhesive backing is coated edge to edge to reduce any edge lift. Easy to clean and is quick and simple to apply by hand.FeaturesQuick and simple to apply by handHard wearing and durableMade from 1mm thick PVC with chamfered edges to reduce scuffing and liftingHigh performance self adhesive backingThe adhesive is coated edge to edge to reduce any edge liftEasy to cleanThe photoluminescent grade is off-white and translucent in the light. Once the lights go off, it glows for up to 30 minutes with a yellow/green colour, showing safe exit routes or hazardous areas.

GBP 359.99
1

6x Watco Heavy Duty Line Marking Tape 100mm X 30M Red XHDLMT100R

6x Watco Heavy Duty Line Marking Tape 100mm X 30M Red XHDLMT100R

Images for illustration purposes onlyLine marking tape is hard wearing and durable. Made from 1mm thick PVC with chamfered edges to reduce scuffing and lifting. High performance self adhesive backing is coated edge to edge to reduce any edge lift. Easy to clean and is quick and simple to apply by hand.FeaturesQuick and simple to apply by handHard wearing and durableMade from 1mm thick PVC with chamfered edges to reduce scuffing and liftingHigh performance self adhesive backingThe adhesive is coated edge to edge to reduce any edge liftEasy to cleanThe photoluminescent grade is off-white and translucent in the light. Once the lights go off, it glows for up to 30 minutes with a yellow/green colour, showing safe exit routes or hazardous areas.

GBP 1919.94
1

6x Watco Heavy Duty Line Marking Tape 75mm X 30M Red XHDLMT75RED

6x Watco Heavy Duty Line Marking Tape 75mm X 30M Red XHDLMT75RED

Images for illustration purposes onlyLine marking tape is hard wearing and durable. Made from 1mm thick PVC with chamfered edges to reduce scuffing and lifting. High performance self adhesive backing is coated edge to edge to reduce any edge lift. Easy to clean and is quick and simple to apply by hand.FeaturesQuick and simple to apply by handHard wearing and durableMade from 1mm thick PVC with chamfered edges to reduce scuffing and liftingHigh performance self adhesive backingThe adhesive is coated edge to edge to reduce any edge liftEasy to cleanThe photoluminescent grade is off-white and translucent in the light. Once the lights go off, it glows for up to 30 minutes with a yellow/green colour, showing safe exit routes or hazardous areas.

GBP 1499.94
1

6x Watco Heavy Duty Line Marking Tape 50mm X 30M Red XHDLMT50R

6x Watco Heavy Duty Line Marking Tape 50mm X 30M Red XHDLMT50R

Images for illustration purposes onlyLine marking tape is hard wearing and durable. Made from 1mm thick PVC with chamfered edges to reduce scuffing and lifting. High performance self adhesive backing is coated edge to edge to reduce any edge lift. Easy to clean and is quick and simple to apply by hand.FeaturesQuick and simple to apply by handHard wearing and durableMade from 1mm thick PVC with chamfered edges to reduce scuffing and liftingHigh performance self adhesive backingThe adhesive is coated edge to edge to reduce any edge liftEasy to cleanThe photoluminescent grade is off-white and translucent in the light. Once the lights go off, it glows for up to 30 minutes with a yellow/green colour, showing safe exit routes or hazardous areas.

GBP 1019.94
1

6x Watco Concrex Coloured Cold Set Tile Red 25KG CXCCTRD25

6x Watco Concrex Coloured Cold Set Tile Red 25KG CXCCTRD25

Images for illustration purposes onlyConcrex Colours Cold Set has the same features as the traditional Concrex with the added benefit the ability to cure in low temperatures and a variety of colours to choose from. Ideal for winter use and cold room conditions. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesHeavy duty, two part epoxy resin mortarRange of colours to blend with existing coloured floorsVirtually indestructible Good chemical resistanceResin rich for thin section and feather-edge repairsSuitable for heavy trafficEasy to apply. Takes heavy traffic after 12-16 hours at 20CCoverage 1.2m per 10kg at 5mm thick

GBP 1859.94
1

6x Watco Concrex Coloured Cold Set Tile Red 10KG CXCCTRD10

6x Watco Concrex Coloured Cold Set Tile Red 10KG CXCCTRD10

Images for illustration purposes onlyConcrex Colours Cold Set has the same features as the traditional Concrex with the added benefit the ability to cure in low temperatures and a variety of colours to choose from. Ideal for winter use and cold room conditions. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesHeavy duty, two part epoxy resin mortarRange of colours to blend with existing coloured floorsVirtually indestructible Good chemical resistanceResin rich for thin section and feather-edge repairsSuitable for heavy trafficEasy to apply. Takes heavy traffic after 12-16 hours at 20CCoverage 1.2m per 10kg at 5mm thick

GBP 983.94
1

Watco Concrex Coloured Cold Set Tile Red 25KG

Watco Concrex Coloured Cold Set Tile Red 25KG

Images for illustration purposes onlyConcrex Colours Cold Set has the same features as the traditional Concrex with the added benefit the ability to cure in low temperatures and a variety of colours to choose from. Ideal for winter use and cold room conditions. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesHeavy duty, two part epoxy resin mortarRange of colours to blend with existing coloured floorsVirtually indestructible Good chemical resistanceResin rich for thin section and feather-edge repairsSuitable for heavy trafficEasy to apply. Takes heavy traffic after 12-16 hours at 20CCoverage 1.2m per 10kg at 5mm thick

GBP 349.99
1

Watco Concrex Coloured Cold Set Tile Red 10KG

Watco Concrex Coloured Cold Set Tile Red 10KG

Images for illustration purposes onlyConcrex Colours Cold Set has the same features as the traditional Concrex with the added benefit the ability to cure in low temperatures and a variety of colours to choose from. Ideal for winter use and cold room conditions. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesHeavy duty, two part epoxy resin mortarRange of colours to blend with existing coloured floorsVirtually indestructible Good chemical resistanceResin rich for thin section and feather-edge repairsSuitable for heavy trafficEasy to apply. Takes heavy traffic after 12-16 hours at 20CCoverage 1.2m per 10kg at 5mm thick

GBP 179.99
1

Watco Safety Grip Tile Red 5m2

Watco Safety Grip Tile Red 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 199.99
1

6x Watco Safety Grip Tile Red 5m2 Sgtrd

6x Watco Safety Grip Tile Red 5m2 Sgtrd

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 1079.94
1

Watco Safety Grip Cold Cure Tile Red 5m2

Watco Safety Grip Cold Cure Tile Red 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 219.99
1

6x Watco Safety Grip Cold Cure Tile Red 5m2 Sgcctrd

6x Watco Safety Grip Cold Cure Tile Red 5m2 Sgcctrd

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 1199.94
1

Watco Fastcoat Tile Red, 2.5L

Watco Fastcoat Tile Red, 2.5L

Images for illustration purposes only Watco Fastcoat is a new type of resin formulation that allows you to have your floor cleaned, prepared and painted within a single day. Uniquely developed by Watcos paint chemists, Fastcoat is a revolution in floor coatings that has only been made possible by recent developments in polyaspartic resin technology. Our unique formulation uses this incredibly versatile resin to produce a high grade, high performance paint for heavily used areas both inside and outside. Recommended areas of use Production Areas Warehouses Features Revolutionary, high performance, two part, polyaspartic resin formulation Exceptionally fast curing - apply 2 coats in one day to reduce downtime Extremely strong easily copes with very heavy traffic Superior abrasion and scratch resistance Can be applied at low temperatures as low as -10C and as high as 25C Excellent resistance to UV and weathering Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance -10C 24 hours 16 hours 30 hours 72 hours 14 days 0C 12 hours 8 hours 16 hours 30 hours 14 days 10C 6 hours 4 hour 8 hours 16 hours 7 days 20C 4 hours 2 hour 6 hours 16 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 199.99
1

Watco Safety Coat Coarse Pure Red

Watco Safety Coat Coarse Pure Red

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 269.99
1