Pricemate

Watco Food Safe Coating Light Grey 2.5L

Images for illustration purposes onlyWatco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry. FeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CExcellent chemical resistanceSteam cleanable

GBP 199.99

1

Watco Safety Coat Food Safe Light Grey 2.5L

Images for illustration purposes onlyWatco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry.This is an anti slip version of Watco Food Safe CoatingRecommended areas of useFood preparation environmentsCold food storage such as walk-in fridgesAreas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfacesFeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CSlip resistantExcellent chemical resistanceSteam cleanablePendulum Slip Test ValuesDry PTV Wet PTV65 Low slip potential 45 Low slip potential

GBP 209.99

1

Watco Resiflow Chemical Grade Light Grey, 20KG

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Resiflow Supergloss into a class of its own. This one coat, high build, self-levelling epoxy resin finish, leaves a smooth, exceptionally high gloss surface, which is both attractive and easy to keep clean. This high performance formulation is usually applied at 1-2mm thick, but can be applied up to 5mm in one application. It is our ultimate floor covering for durability and appearance.Resiflow Supergloss has very good general chemical resistance, but this has been enhanced to Excellent for Resiflow Chemical Grade. If slip resistance, as well as excellent chemical resistance is important, apply one coat of Watco Protecta-Coat Anti Slip (62 PTV) , a clear, glossy, polyaspartic resin, over the top.Both grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion and flexibility, and they have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useProduction areasShowroomsReception areasClean roomsWorkshopsChemical storage areasWarehousesSwitchgear and plant roomsFood & pharmaceutical processing, storage and laboratory areasFeaturesOur top of the range high gloss, high performance, high build epoxy resin self-levelling floor finishSuperior wear and abrasion resistance with just one 1-2mm thick applicationCan be applied up to 5mm thick if requiredExtremely easy to keep cleanExcellent resistance to oils and general chemical spillagesResiflow Chemical Grade has exceptional resistance to aggressive chemicalsPerfect for floors where high levels of hygiene are importantLow odour safe to use in confined spacesSuperior performance demonstrated by ISO testing to CE Mark EN1504-2Curing Times Recoat Time (if required) Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 16 hours 12 hours 24 hours 48 hours 7 days20C 16 hours 8 hours 16 hours 48 hours 7 days 30C 16 hours 6 hour 16 hours 27 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99

1

6x Watco Spectrum Concrete Floor Paint Light Grey WH SPCFPRAL7035

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which has produced a Best in Class single pack paint for general use. This attractive, hard-wearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 719.94

1

Watco Spectrum Concrete Floor Paint Light Grey WH

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which has produced a Best in Class single pack paint for general use. This attractive, hard-wearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 129.99

1

Watco Concrete Floor Paint Matt Anti Slip Light Grey

Our unique formula is based on a blend of resins and polyurethane, which produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Matt Anti Slip provides a good level of slip resistance and the uniform matt finish helps to disguise imperfections in older floors and reduce reflection or glare.All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of useProduction AreasWarehousesWorkshopsData centresShop floors, store rooms & stairsUtility and plant roomsFeaturesProfessional quality, single pack polyurethane coatingTransforms and dustproofs drab, stained concreteIdeal for identifying production and storage areas and traffic aislesEasy to use and easy to keep cleanSuperior performance demonstrated by ISO testing to CE mark EN 1504-2Gloss, Matt & Gloss Anti Slip versions availableAvailable in 190 RAL coloursCuring Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 139.99

1

6x Watco Spectrum Cfp As Light Grey WH SPCFPRAL7035AS

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 743.94

1

Watco Concrete Floor Paint Matt Light Grey

Our unique formula is based on a blend of resins and polyurethane, which has produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Matt helps to disguise imperfections in older floors and reduce reflection or glare. Its still easy to keep clean and has all the benefits of the high gloss finish.All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of useProduction AreasWarehousesWorkshopsData centresShop floors, store rooms & stairsUtility and plant roomsFeaturesProfessional quality, single pack polyurethane coatingTransforms and dustproofs drab, stained concreteIdeal for identifying production and storage areas and traffic aislesEasy to use and easy to keep cleanSuperior performance demonstrated by ISO testing to CE mark EN 1504-2Matt Anti Slip, Gloss & Gloss Anti Slip versions availableNew formulations to RAL colour shadesCuring Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 133.99

1

Watco Spectrum Cfp As Light Grey WH

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which produced a Best in Class single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 133.99

1

Watco Resiflow Super Gloss Light Grey, 20KG

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Resiflow Super Gloss into a class of its own. This one coat, high build, self-levelling epoxy resin finish, leaves a smooth, exceptionally high gloss surface, which is both attractive and easy to keep clean. This high performance formulation is usually applied at 1-2mm thick, but can be applied up to 5mm in one application. It is our ultimate floor covering for durability and appearance.Resiflow Supergloss has very good general chemical resistance, but this has been enhanced to Excellent for Resiflow Chemical Grade. If slip resistance, as well as excellent chemical resistance is important, apply one coat of Watco Protecta-Coat Anti Slip (62 PTV) , a clear, glossy, polyaspartic resin, over the top.Both grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion and flexibility, and they have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useProduction areasShowroomsReception areasClean roomsWorkshopsWarehousesSwitchgear and plant roomsFood & pharmaceutical processing, storage and laboratory areasFeaturesOur top of the range high gloss, high performance, high build epoxy resin self-levelling floor finishSuperior wear and abrasion resistance with just one 1-2mm thick applicationCan be applied up to 5mm thick if requiredExtremely easy to keep cleanExcellent resistance to oils and general chemical spillagesResiflow Chemical Grade has exceptional resistance to aggressive chemicalsPerfect for floors where high levels of hygiene are importantLow odour safe to use in confined spacesSuperior performance demonstrated by ISO testing to CE Mark EN1504-2Curing Times Recoat Time (if required) Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 16 hours 12 hours 24 hours 48 hours 7 days20C 16 hours 8 hours 16 hours 48 hours 7 days 30C 16 hours 6 hour 16 hours 27 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 249.99

1

Brand

Colour

Merchant

Price (EUR)