Pricemate

Xtralis OSP-002 OSID Laser Alignment Tool

Xtralis OSP-002 OSID Laser Alignment ToolThis product is a unique alignment tool for fast alignment.The tool aligns and locks the eyeball and it also activates the Emitters when it is locked.

GBP 74.84

1

Vesda Xtralis ISP-406 ICAM Tool Cover Removal

Please note This product is no longer available. Pleasecontact usfor further information.Vesda Xtralis ISP-406 ICAM Tool Cover RemovalA cover removal tool for the Vesda ICAM IAS Air-Sampling Smoke Detection System.

GBP 4.50

1

Vesda Xtralis VSP-1007 VESDA-E VEA Stainless Steel Sampling Point Installation Tool

Vesda Xtralis VSP-1007 VESDA-E VEA Stainless Steel Sampling Point Installation ToolThe VESDA-E VEA series of detectors combines VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional detectors. VEA detectors use air sampling points and multiple microbore air sampling tubes with three alarm sensitivity settings.The VESDA-E VEA stainless steel sampling point provides a more discreet smoke detection. Using a dedicated installation tool and perforated sampling area the VEA stainless steel sampling point provides a tamperproof solution that is ideal for correctional and educational applications.The low profile of the VEA stainless steel sampling point makes it ideal for installation in cabinets or narrow spaces.Fully interchangeable with the standard VSP-980 plastic sampling point the VEA stainless steel sampling point connects to 6mm VEA sampling tube via simple push fit connection to allow rapid and reliable installation.Patented VEA sampling point allows full tube integrity monitoring for centralised test and maintenance at the VEA detector significantly reducing ongoing maintenance time and cost.

GBP 86.32

1

Xtralis OSID OSID-INST Installation Kit

Xtralis OSIDOSID-INSTInstallation KitThe OSID Installation Kit OSID-INST is used in commissioning and maintaining the correct operation of the OSID Smoke Detector.When the OSID system is installed over very large distances and in brightly lit areas it may be difficult to see the output laser from the OSID Laser Alignment Tool when commissioning the system. To aid in the alignment of the Imager and Emitter the Commissioning Aid reflector is provided. The reflector should be attached to the opposing unit that is not being aligned. For example if the Emitter is being aligned the reflector should be attached to the front cover of the Imager. Returning light to the user off the reflector from the laser alignment tool will be brighter and make it easier to determine if the unit being commissioned has been aligned correctly.For to see how to use the Intallation Kit please view the OSID Product Guide pages 35 - 38.The kit includesOSID Installation and Maintenance ManualOSID commissioning aid reflectorBlu-Tack adhesiveOSID smoke simulating test filterOSID cleaning clothOSID serial PC interface cableOSID laser alignment tool with three LR44 button cell batteries pre-installed

GBP 193.92

1

Vesda Xtralis PIP-014 Pipe Cutters

Vesda Xtralis PIP-014 Pipe CuttersHard wearing tool for neat cuts in pipes it comes complete with a V shaped long lasting blade which is made from high carbon steel. In turn this reduces tube deformation.It features a comfortable handle without a return spring for ease of use.The Vesda range of Pipes and Fittings have been specially developed to provide fully matched components for the optimal performance of your whole Vesda aspirating system.They are also manufactured to comply with the requirements of BS5391 Part 1 EN 61386-1 and the new EN54 Part 20 guaranteeing you quality.The pipes are a metric standard of 25mm external diameter with suitable adapters available for imperial to metric conversions and are designed for use with any make of low pressure aspirating type smoke detection system.Unlike some metal pipes Vesda ABS pipework is very light in weight. This makes it easy to handle in high and difficult places where systems are often installed. The standard Vesda pipe and fittings are supplied in red to identify their service as fire.Key FeaturesShipping weight 1000gmsComfortable handleNeat cutsV shaped bladePlease Note The PIP-014 is equivalent to the REDPIPC.

GBP 81.65

1

Vesda VIC-010 VESDAnet Card for VLF-250 amp VLF-500

Vesda VIC-010 VESDAnet Card for VLF-250 VLF-500The VESDAnet Interface Card VN Card is a simple to install plug-in interface card for the range of VESDA LaserFOCUS VLF-250 and VLF-500 smoke detectors. The VN card provides seamless VESDAnet communication from the detector to VESDAnet devices and configuration and monitoring tools.What is VESDAnetVESDAnet is the comprehensive fault tolerant proprietary VESDA communications protocol. VESDAnet links the VESDA range of detectors displays programmers and remote units on the one network or remotely to enable sophisticated configuration monitoring and control from local or remote sites. Using a VESDA High Level Interface HLI VESDAnet also interfaces with systems external to the network such as building management systems and Fire Alarm Control Panels. Using a VESDA configuration tool such as VESDA System Configurator VSC or an LCD Programmer users can view and administer all devices via VESDAnet. The VN Card can be configured through the VESDA detector via its RS-232 Serial port or from the VESDAnet using VSC.Key FeaturesProvides seamless VESDAnet fault-tolerant communicationQuick and simple to installMinimal configuration requiredDiagnostic LEDs give visual indication of the cards statusFully transferrable between Xtralis VESDA VLF detectors

GBP 355.75

1

VESDA-E VEA VSP-980-ST Stainless Steel Sampling Point

VESDA-E VEA VSP-980-ST Stainless Steel Sampling PointThe VESDA-E VEA series of detectors combines VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional detectors. VEA detectors use air sampling points and multiple microbore air sampling tubes with three alarm sensitivity settings.The VESDA-E VEA stainless steel sampling point provides a more discreet smoke detection. Using a dedicated installation tool and perforated sampling area the VEA stainless steel sampling point provides a tamperproof solution that is ideal for correctional and educational applications. The low profile of the VEA stainless steel sampling point makes it ideal for installation in cabinets or narrow spaces.Fully interchangeable with the standard VSP-980 plastic sampling point the VEA stainless steel sampling point connects to 6mm VEA sampling tube via simple push fit connection to allow rapid and reliable installation.Patented VEA sampling point allows full tube integrity monitoring for centralised test and maintenance at the VEA detector significantly reducing ongoing maintenance time and cost.Key FeaturesTwo different types standard and surface mountAvailable in black or whiteFull supervisionAutomated cleaning by the detectorSwivel joint to allow optimum tube orientationModels to suite 6mm and 4mm microbore tubesDirect mount or ceiling tile mount with retainer housingEase of replacement

GBP 205.28

1

Vesda Xtralis VSP-1008 VESDA-E VEA Stainless Steel Sampling Duct Kit

Vesda Xtralis VSP-1008 VESDA-E VEA Stainless Steel Sampling Duct KitOpen Duct Arrangement Sampling points are designed for use in open duct application by using VSP-1008 duct mounting kit. In open duct application these sampling points can be mounted onto duct kit using simple nut arrangement and then entire assembly can be mounted into open duct. This arrangement is recommended for open duct sizes from 4 to 12.The VESDA-E VEA series of detectors combines VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional detectors. VEA detectors use air sampling points and multiple microbore air sampling tubes with three alarm sensitivity settings.The VESDA-E VEA stainless steel sampling point provides a more discreet smoke detection. Using a dedicated installation tool and perforated sampling area the VEA stainless steel sampling point provides a tamperproof solution that is ideal for correctional and educational applications.The low profile of the VEA stainless steel sampling point makes it ideal for installation in cabinets or narrow spaces.Fully interchangeable with the standard VSP-980 plastic sampling point the VEA stainless steel sampling point connects to 6mm VEA sampling tube via simple push fit connection to allow rapid and reliable installation.Patented VEA sampling point allows full tube integrity monitoring for centralised test and maintenance at the VEA detector significantly reducing ongoing maintenance time and cost.

GBP 89.81

1

Vesda Xtralis OSID Emitter Wired 24Vdc OSE-SPW

Xtralis OSID Emitter Wired 24Vdc OSE-SPWThe OSE-SPW is used as a preferred solution when 24 Vdc is close by.The company that revolutionized very early warning smoke detection with VESDA has reinvented smoke detection for open spaces with Open-area Smoke Imaging Detection OSID. OSID by Xtralis provides reliable cost-effective smoke detection for open spaces where fire detection presents unique challenges and where very early warning is not always the priority.In its simplest configuration OSID by Xtralis uses one imager a camera-like device with a wide field of view and a wired or battery-powered emitter roughly aligned on the opposite wall within the protected area. The emitter sends both infrared and ultraviolet coded light signals to the imager. If the light reception is altered due to the presence of genuine smoke particles the imager will go into alarm. The novel use of dual light frequencies in an open-path device enables OSID to discriminate between real smoke and other objects including insects steam condensation and dust thus drastically reducing false alarms.Key FeaturesOSIDs uncompromising performance is based on the patented use of digital imaging dual-frequency beams and smart algorithms deliveringPatented dual wavelength UV IR particle detectionCMOS Imager with wide viewing anglesSimple installation commissioning and maintenanceHigh tolerance to vibration and structural movementHightolerance to dust fogging steam reflections and object intrusionHigh resistance to reflected sunlightOn-board log memorySoftware tool for diagnostic purposesAesthetically discreet and 3D coverageLong range up to 150 m. 492 ft. with minimal free space 15 cm.5.85ApplicationsOSID is ideal for use in a wide range of industries and applications. These include atriums domes and large rooms inAirportsTrain stationsShopping centresStadiumsEducational facilitiesHotels convention centres and office buildingscomplexesEntertainment venuesWarehouses and production floors

GBP 326.59

1

Vesda Xtralis OSE-SP-01 OSID-DE Emitter Alkaline Battery

Vesda Xtralis OSE-SP-01 OSID-DE Emitter Alkaline BatteryEach emitter up to 7 generates 2 light beams in the UV and IR frequencies. These bundles are also encoded through a unique code recognized by the receiver. This approach allows the receiver to ignore any UV and IR light beams that come from sources other than emitters the typical interference problems generated by sunlight are thus overcome.Battery powered emitters last for 3 years.Emitter Size 208 mm x 136 mm x 96 mm. Certificate 3052011 EU - CPR.Open-area Smoke Imaging Detection OSID by Xtralis is a new innovation in projected beam smoke detection technology. By using advanced dual wavelength projected beams and optical imaging technology for early warning smoke detection OSID provides a cost-effective reliable and easy-to-install solution that overcomes typical beam detection issues such as false alarm incidents and alignment difficulties.In its simplest configuration OSID by Xtralis uses one imager a camera-like device with a wide field of view and a wired or battery-powered emitter roughly aligned on the opposite wall within the protected area. The emitter sends both infrared and ultraviolet coded light signals to the imager. If the light reception is altered due to the presence of genuine smoke particles the imager will go into alarm. The novel use of dual light frequencies in an open-path device enables OSID to discriminate between real smoke and other objects including insects steam condensation and dust thus drastically reducing false alarms.Key FeaturesPatented dual wavelength UV IR particle detectionCMOS imager with wide viewing anglesSimple installation commissioning and maintenanceHigh tolerance to vibration and structural movementHigh resistance to dust fogging steam reflections and object intrusionHigh resistance to reflected sunlightOn-board log memorySoftware tool for diagnostic purposesAesthetically discreet and 3D coverageLong range up to 150 m 492 ft. with minimal free space dia. 15 cm 5.85 inchApplicationsOSID is ideal for use in a wide range of industries and applications. These include atriums domes and large rooms inAirportsTrain stationsShopping centresStadiumsEducational facilitiesHotels convention centres and office buildingscomplexesEntertainment venuesWarehouses and production floors

GBP 326.59

1

Vesda Xtralis OSI-90 Open-area Smoke Imaging Detector - 80 Coverage

Vesda Xtralis OSI-90 Open-area Smoke Imaging Detector - 80 CoverageThe OSI-90 covers a distance of 30 - 150m with the OSE-SPW. This configuration is for a 1 on 1 system and is not suitable to work with high powered emitters.The company that revolutionized very early warning smoke detection with VESDA has reinvented smoke detection for open spaces with Open-area Smoke Imaging Detection OSID. OSID by Xtralis provides reliable cost-effective smoke detection for open spaces where fire detection presents unique challenges and where very early warning is not always the priority.In its simplest configuration OSID by Xtralis uses one imager a camera-like device with a wide field of view and a wired or battery-powered emitter roughly aligned on the opposite wall within the protected area. The emitter sends both infrared and ultraviolet coded light signals to the imager. If the light reception is altered due to the presence of genuine smoke particles the imager will go into alarm. The novel use of dual light frequencies in an open-path device enables OSID to discriminate between real smoke and other objects including insects steam condensation and dust thus drastically reducing false alarms.Key FeaturesOSIDs uncompromising performance is based on the patented use of digital imaging dual-frequency beams and smart algorithms deliveringPatented dual wavelength UV IR particle detectionCMOS Imager with wide viewing anglesSimple installation commissioning and maintenanceHigh tolerance to vibration and structural movementHightolerance to dust fogging steam reflections and object intrusionHigh resistance to reflected sunlightOn-board log memorySoftware tool for diagnostic purposesAesthetically discreet and 3D coverageLong range up to 150 m. 492 ft. with minimal free space 15 cm.5.85ApplicationsOSID is ideal for use in a wide range of industries and applications. These include atriums domes and large rooms inAirportsTrain stationsShopping centresStadiumsEducational facilitiesHotels convention centres and office buildingscomplexesEntertainment venuesWarehouses and production floorsThe OSI-90 Imager is used in multi emitter applications or in shorter distance applications. The appropriate number of OSE-SP-01 OSE-SPW or OSE-HPW Emitters must be paired with the Imager to a maximum of seven.

GBP 691.74

1

Vesda Xtralis OSI-10 Open-area Smoke Imaging Detector - 7 Coverage

Vesda Xtralis OSI-10 Open-area Smoke Imaging Detector - 7 CoverageThe OSI-10 covers a distance of 30 - 150m with the OSE-SPW. This configuration is for a 1 on 1 system and is not suitable to work with high powered emitters.The company that revolutionized very early warning smoke detection with VESDA has reinvented smoke detection for open spaces with Open-area Smoke Imaging Detection OSID. OSID by Xtralis provides reliable cost-effective smoke detection for open spaces where fire detection presents unique challenges and where very early warning is not always the priority.In its simplest configuration OSID by Xtralis uses one imager a camera-like device with a wide field of view and a wired or battery-powered emitter roughly aligned on the opposite wall within the protected area. The emitter sends both infrared and ultraviolet coded light signals to the imager. If the light reception is altered due to the presence of genuine smoke particles the imager will go into alarm. The novel use of dual light frequencies in an open-path device enables OSID to discriminate between real smoke and other objects including insects steam condensation and dust thus drastically reducing false alarms.3D Volumetric CoverageA significant benefit of OSID is its ability to provide volumetric coverage. As many as seven emitters can be placed within the field of view of a single imager each placed at different heights. The OSID imagers large viewing angles both horizontal and vertical enable three-dimensional area coverage for design flexibility and additional deployment savings. Unlike other volumetric technologies OSID delivers absolute calibration for consistent detection performance regardless of lighting conditions smoke colour airflows or other environmental conditions.Key FeaturesOSIDs uncompromising performance is based on the patented use of digital imaging dual-frequency beams and smart algorithms deliveringPatented dual wavelength UV IR particle detectionCMOS Imager with wide viewing anglesSimple installation commissioning and maintenanceHigh tolerance to vibration and structural movementHightolerance to dust fogging steam reflections and object intrusionHigh resistance to reflected sunlightOn-board log memorySoftware tool for diagnostic purposesAesthetically discreet and 3D coverageLong range up to 150 m. 492 ft. with minimal free space 15 cm.5.85ApplicationsOSID is ideal for use in a wide range of industries and applications. These include atriums domes and large rooms inAirportsTrain stationsShopping centresStadiumsEducational facilitiesHotels convention centres and office buildingscomplexesEntertainment venuesWarehouses and production floorsThe OSI-10 Imager must be paired with either the OSE-SP-01 or OSE-SPW Standard Power Emitter. The OSI-10 can only support one emitter.

GBP 671.33

1

Vesda OSI-RE-SS OSID R Reflective Beam

Vesda OSI-RE-SS OSID R Reflective BeamThe Vesda OSI-RE-SS is a 4-wire single-ended reflected type beam smoke detector that includes an 8 reflector and an integral sensitivity test.The Vesda OSI-RE-SS is a reflector-type linear optical beam smoke detector designed to operate as a component of fire alarm systems. The beam operates primarily on the principle of light obscuration utilising an Infra-Red beam. Optical beam smoke detectors are particularly appropriate for protecting buildings with large open spaces such as warehouses atriums etc.The OSI-RE-SS detector is a combined transmitterreceiver unit that can be directly connected to a conventional detector circuit.Key FeaturesCombined transmitter and receiver unit range 5-100 m 16-328 ftConventional modelReceiver consists of a CMOS imaging CCDWide 12 field of viewIntuitive beam alignment indicated by directional arrowsSingle IR wavelengthHighly resistant to building movement tolerates - 1 movementResistant to strong light sources does not alarm when saturated by sunResistant to large solid intruding objectsAutomatic sensitivity threshold level setting50 horizontal and 20 vertical beam alignmentBuilt-in heaterElectronic simulated smoke test from ground levelStandby fault and alarm LED indicators visible from the front and bottomAutomatic drift compensationPaintable coverRemovable plug-in terminal blocksOptional heater kit available for the reflectorThe Infra-Red transmitter and receiver Imager generates a beam of light towards a high efficiency reflector. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.The receiver imager has a wide FOV of 12 and tracks automatically the reflector in case of building movement or movement of its support structure. It is virtually impossible for the receiver to lose the reflector out of its side of view without any structural damage being caused to the building. As a result of this operation the OSI-RE-SS eliminates the number one cause of false alarms andor faults with traditional beam detectors.Optical filtering high-speed image acquisition and intelligent software algorithms provide the OSID-RE system with higher levels of stability and with greater resistance to high level lighting variability. As such the detector has a better resistance to sunlight and intruding objects in its FOV.The detector will not alarm when saturated by sunlight reflected sunlight or any other very bright light sources. In worst case the detector will go in to trouble and hence solving another cause of false alarms with traditional basic photocell receiver beam detectors. Thanks to the smoke imaging techniques the detector will not alarm for partial and sudden blockage.The alignment of the detector is extremely intuitive fast and accurate. Both the IR transmitter and the CMOS imager are contained in the eyeball that can turn freely in all directions. The eyeball moves - 20 in the vertical direction and 50 in the horizontal direction. Four arrows that indicate the direction to move the eyeball will guide the user to find the imagers perfect alignment with the reflector.To get started swiftly at long distances a laser tool can be inserted in the eyeball to allow finding the reflector quickly and then fine-tuning the eyeball to the optimum alignment. Once the optimum alignment is finalised signalled by all green arrows and LED the eyeball is locked by tightening the lever on its side. A paintable cover is then placed over the front to hide the alignment arrows locking mechanism and secures the locking lever in locked position. Unique in the market the sensitivity of the detector is selected and set automatically at the optimum sensitivity based on the size of the reflector measured in the FOV. The detector incorporates automatic drift compensation whereby the detector will adjust its detection thresholds in line with any long term signal reduction of the beam caused by contamination of the optical surfaces. An internal heating option is also provided on the Imager to prevent condensation on the optical surface.

GBP 870.91

1

Brand

Merchant

Price (EUR)