134 results (0,15017 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Vesda Xtralis 25mm White System Test Point PIP-018-W

Vesda Xtralis 25mm White System Test Point PIP-018-W

Vesda Xtralis 25mm White System Test Point PIP-018-W Pack of 1025mm System Test Points are installed at the furthest point of the pipework and are used to introduce smoke in order to measure the time it takes for the smoke to reach the detectors. The maximum transport time is 120 seconds. They should always be connected withABS solvent cement.Key FeaturesMaterial ABSColour WhiteOperating temperature range -40C to 70CEN5425mmPack of 10Please note The PIP-018-W is equivalent to the WHTAST025I.

GBP 47.63
1

Morley HLS-RES-V3REP-PL Response Plus Repeater

Morley HLS-RES-V3REP-PL Response Plus Repeater

Morley HLS-RES-V3REP-PL Response Plus RepeaterThe Response Paging System offers the latest innovations in wireless paging and monitoring. Its a cost effective and flexible system that provides the ability to quickly respond to activated alarms.The Repeater is a purpose designed repeater for the Honeywell Response Paging System. Its used to extend radio coverage with the Response Paging family on fire event messages. The repeater receives and transmits wirelessly and includes two dipole antennas one for the receive connection and one for the transmit connectionKey FeaturesRepeater panel

GBP 2170.67
1

Vesda Xtralis M6 Rawlplug Adaptor - Pack of 100 PIP-032

Vesda Xtralis M6 Rawlplug Adaptor - Pack of 100 PIP-032

Vesda Xtralis M6 Rawlplug Adaptor - Pack of 100 PIP-032The M6 rawlplug adaptor is used for fixing the clip to a wall.A key element of the VESDA suction system is the suction pipe system that actively transports air from the protected area to the detector.The VESDA system installation can be designed for the most complex areas using a small number of shaped elements that have been carefully selected.The use of these elements has a positive effect on the installations automation which translates into the quality of VESDA systems.Please Note The PIP-032 is equivalent to the ACCRPA025A.

GBP 59.53
1

Vesda Xtralis KA-1 Steam Trap

Vesda Xtralis KA-1 Steam Trap

Vesda Xtralis KA-1 Steam TrapIf the Compact ASD is operated in environments where condensate can form in the pipe system then a condensate trap is used. To collect the condensate the steam trap is fitted at the lowest point of the pipe system between the air filter and the smoke detection system. Using 45 angles gives optimum wall distance.The steam trap can be operated in a temperature range of 0C to 50C. The sinter filter in the condensate trap has a pore width of 50 m and additionally absorbs coarse dust particles.The condensate trap is used in the following areasAreas with severely oscillating temperatures and high air humidityExternal areasSauna areas

GBP 280.10
1

Vesda Xtralis VSW-216 VSM4 Additional PC Licence

Vesda Xtralis VSW-216 VSM4 Additional PC Licence

Vesda Xtralis VSW-216 VSM4 Additional PC LicenceAn additional PC Licence for the VSM4.VSM4 configures monitors and trouble-shoots Xtralis aspirating smoke detection systems. It is easy to use and has been designed to provide the operator with complete control. The user friendly interface allows you to assess and respond quickly to system events all from one convenient location. VSM4 is a total solution for integrated control and monitoring of your Xtralis very early warning smoke detection systems.Key FeaturesFull VESDA and VESDA-E system controlComprehensive event managementDrill down floor plansEvent response notification by email and SMS2 to defined users on defined eventsMaintenance information and system optimizationComprehensive configuration and commissioning of all Xtralis devicesFully integrated floor plan design tools compatible with most drawing formatsRemote management over multiple network typesReal-time graphical event indicatorsPowerful event log filteringEvent log archiving for future interrogationExtensive reporting capabilitiesMultiple monitor supportMulti-language supportCustomizable software viewsIndividual user accounts integrated with system access rolesSupports text-to-speech in multiple languages

GBP 1267.87
1

Vesda Xtralis VSW-206 VSM4 Primary PC Licence

Vesda Xtralis VSW-206 VSM4 Primary PC Licence

Vesda Xtralis VSW-206 VSM4 Primary PC LicenceAPrimary PC Licence for the VSM4.VSM4 configures monitors and trouble-shoots Xtralis aspirating smoke detection systems. It is easy to use and has been designed to provide the operator with complete control. The user friendly interface allows you to assess and respond quickly to system events all from one convenient location. VSM4 is a total solution for integrated control and monitoring of your Xtralis very early warning smoke detection systems.Key FeaturesFull VESDA and VESDA-E system controlComprehensive event managementDrill down floor plansEvent response notification by email and SMS2 to defined users on defined eventsMaintenance information and system optimizationComprehensive configuration and commissioning of all Xtralis devicesFully integrated floor plan design tools compatible with most drawing formatsRemote management over multiple network typesReal-time graphical event indicatorsPowerful event log filteringEvent log archiving for future interrogationExtensive reporting capabilitiesMultiple monitor supportMulti-language supportCustomizable software viewsIndividual user accounts integrated with system access rolesSupports text-to-speech in multiple languages

GBP 1497.07
1

Vesda Xtralis PIP-027 Air Sampling Test Point with Cap

Vesda Xtralis PIP-027 Air Sampling Test Point with Cap

Vesda XtralisPIP-027Air Sampling Test Point with CapThey are designed to measure the transportation time a small quantity of smoke is introduced at the furthest point and the measurement in time is calculated from when the smoke enters the sampling point to when the ASD reacts. The maximum transport time is 120 seconds 2 minutes. Test points are the ideal solution for flexibility and convenience. They are installed at the end of the pipe run however for areas such as a lift shaft where accessibility is limited the pipe run can be brought into a riser.A key element of the VESDA system is its suction system which actively transports air from the protected area to the detector.The test point is for periodic smoke testing of the VESDA system for hard to reach areas.VESDA installations can be designed for the most complex areas using carefully selected shaped elements.The use of these shaped elements has a positive effect on the pneumatic system of the installation which translates into the unique and legendary quality of the VESDA system work in each pneumatic system.The suction installation is calculated with theASPIREprogramme.The program is used for modelling and visualization of aspiration installations class calculation in accordance with PN-EN-54-20.Please note The PIP-027 is equivalent to the REDAST025C.

GBP 7.49
1

Vesda Xtralis 25mm 2-Way Ball Valve

Vesda Xtralis 25mm 2-Way Ball Valve

Vesda Xtralis 25mm 2-Way Ball Valve25mm 2 Way Ball Valve. Vesda have over 250000 aspirating smoke detectors installed worldwide the VESDA name has become synonymous with high quality and outstanding performance. An aspirating smoke detection system however only performs at its best with a well designed and installed quality pipework system. Xtralis manufacturer of VESDA detectors recognised this requirement and in 1997 launched its VESDA Pipe and Fittings range.Please note The PIP-023 is equivalent to the RED22P025I.

GBP 46.04
1

Vesda Xtralis Smoke Pen VSP-810

Vesda Xtralis Smoke Pen VSP-810

Vesda Xtralis Smoke Pen VSP-810The Smoke Pen simplifies Aspirating Smoke Detection ASD system testingby providing a user-friendly design that generates a continuous smoke trail.Using refillable wicks the device works like a mechanical pencil where a wickcan be inserted into the pen leaving a 10mm trace that can subsequently beignited by either a lighter or match. The patented design of the wick ensuresa continuous and consistent smoke trail helping simplify ASD system smoketesting. Once smoke testing has been completed smoke can be quicklyextinguished by replacing the smoke pen lid leaving the wick ready for reuseat a later date. The Smoke Pen comes with 6 replacement sticks and aseparate refill pack is available as a spare part.Key FeaturesEasy to useSimplifies system smoke testsEnsures continuous and consistent smoke trailRefillable wicksComes with 6 sticks

GBP 71.15
1

Vesda Xtralis Discreet Clear End Cap for 10mm OD Tube Pack of 10

Vesda Xtralis Discreet Clear End Cap for 10mm OD Tube Pack of 10

Vesda Xtralis Discreet Clear End Cap for 10mm OD Tube Pack of 10Vesda Xtralis Capillary 10mm Discreet Endcap - with over 250000 aspirating smoke detectors installed worldwide the VESDA name has become synonymous with high quality and outstanding performance. An aspirating smoke detection system however only performs at its best with a well designed and installed quality pipework system. Xtralis manufacturer of VESDA detectors recognised this requirement and in 1997 launched its VESDA Pipe and Fittings range.Please note The 222-059 is equivalent to the REDCAP010N.

GBP 5.22
1

Vesda Xtralis Smoke Pen REFILL VSP-811

Vesda Xtralis Smoke Pen REFILL VSP-811

Vesda Xtralis Smoke Pen REFILL VSP-811The Smoke Pen simplifies Aspirating Smoke Detection ASD system testingby providing a user-friendly design that generates a continuous smoke trail.Using refillable wicks the device works like a mechanical pencil where a wickcan be inserted into the pen leaving a 10mm trace that can subsequently beignited by either a lighter or match. The patented design of the wick ensuresa continuous and consistent smoke trail helping simplify ASD system smoketesting. Once smoke testing has been completed smoke can be quicklyextinguished by replacing the smoke pen lid leaving the wick ready for reuseat a later date. The Smoke Pen comes with 6 replacement wicks and aseparate refill pack is available as a spare part.Key FeaturesEasy to useSimplifies system smoke testsEnsures continuous and consistent smoke trailRefillable wicksPlease Note The picture is for illustrative purposes only.

GBP 58.91
1

Vesda Xtralis 059-007 Conical Sampling Point Kit

Vesda Xtralis 059-007 Conical Sampling Point Kit

Vesda Xtralis 059-007 Conical Sampling Point KitThe Vesda25mm Capillary Sampling Point -Conical 059-007set has a tempered sampling tip installed at its end. The set includes capillary tube adapter capillary tube 2m long and 10mm in diameter and a flat sampling tip.Kit Includes2m of 10mm OD tubeTrunk AdaptorPoint and decalWith over 250000 aspirating smoke detectors installed worldwide the VESDA name has become synonymous with high quality and outstanding performance. An aspirating smoke detection system however only performs at its best with a well designed and installed quality pipework system. Xtralis manufacturer of VESDA detectors recognised this requirement and in 1997 launched its VESDA Pipe and Fittings range.Please note The 059-007 is equivalent to the redCSK.

GBP 17.23
1

Vesda-E VEA VEA-040-A00 40-Tube Addressable Detector with LEDs Display

Vesda-E VEA VEA-040-A00 40-Tube Addressable Detector with LEDs Display

Vesda-E VEA VEA-040-A00 40-Tube Addressable Detector with LEDs DisplayThe VESDA-E VEA-040-A10 is an aspirating smoke detector ASD that provides early warning of fire conditions by drawing air samples through a multi-hole addressable microbore tube air-sampling network.The detector easily interfaces with fire warning and fire suppression release systems and can be integrated into a building management system BMS.Key FeaturesThe VEA-040-A10 detector contains the following featuresPinpoint addressability with superior detection compared to spot detectors40 addressable microbore tubes with individual sampling pointsAssured detection with end to end system integrity monitoringInterruption-free business operation with centralized testing and maintenanceSingle sampling point or single tube blockage detectionAutomatic sampling point cleaningThree sensitivity settings for the sampling pointsVariable length capillary tubes up to 100 m 328 ftLaser-based absolute smoke detectionDual stage filtering and clean air barrier for optics protectionReliable linear pump technologyLEDs for alarm and fault signalling3.5 colour touch screen for status reviewSeven programmable relaysTwo GPIs monitored and unmonitoredPC software supportiVESDA app for system monitoring on mobile devicesIP 40 enclosure not UL testedEasy mounting with steel support bracketField replaceable filter smoke sensor module pump and rotary valveVESDAnet networkingEthernet 100 base TWiFi 802.11 bgnLocal host-mode USB portEasy cable termination accessEvent Log 20000 events

GBP 7487.12
1

Vesda-E VEA VEA-040-A10 40-Tube Addressable Detector with 3.5quot Touchscreen Display

Vesda-E VEA VEA-040-A10 40-Tube Addressable Detector with 3.5quot Touchscreen Display

Vesda-E VEA VEA-040-A10 40-Tube Addressable Detector with 3.5 Touchscreen DisplayThe VESDA-E VEA-040-A10 is an aspirating smoke detector ASD that provides early warning of fire conditions by drawing air samples through a multi-hole addressable microbore tube air-sampling network.The detector easily interfaces with fire warning and fire suppression release systems and can be integrated into a building management system BMS.Key FeaturesThe VEA-040-A10 detector contains the following featuresPinpoint addressability with superior detection compared to spot detectors40 addressable microbore tubes with individual sampling pointsAssured detection with end to end system integrity monitoringInterruption-free business operation with centralized testing and maintenanceSingle sampling point or single tube blockage detectionAutomatic sampling point cleaningThree sensitivity settings for the sampling pointsVariable length capillary tubes up to 100 m 328 ftLaser-based absolute smoke detectionDual stage filtering and clean air barrier for optics protectionReliable linear pump technologyLEDs for alarm and fault signalling3.5 colour touch screen for status reviewSeven programmable relaysTwo GPIs monitored and unmonitoredPC software supportiVESDA app for system monitoring on mobile devicesIP 40 enclosure not UL testedEasy mounting with steel support bracketField replaceable filter smoke sensor module pump and rotary valveVESDAnet networkingEthernet 100 base TWiFi 802.11 bgnLocal host-mode USB portEasy cable termination accessEvent Log 20000 events

GBP 8241.78
1

Vesda Xtralis PIP-015 Flush Sample Point Head Only for 10mm OD Tube

Vesda Xtralis PIP-015 Flush Sample Point Head Only for 10mm OD Tube

Vesda Xtralis PIP-015 Flush Sample Point Head Only for 10mm OD TubeDue to the aesthetic design of some buildings such as ornate ceilings or ceiling art-work a discreet unobtrusive smoke detection system is often desirable. Large open atria or voids feature stratified thermal layers that can prevent cooled smoke from reaching ceiling level. As such conventional systems will normally only respond when a fully-fledged fire condition is reached by which time significant damage has already occurred.VESDA provides the discreet detection required in heritage buildings by routing the sampling pipes in areas that are not visible from normal occupancy. Small-bore capillary pipes are used to provide detection at the required location. The room fabric often dictates the location of these capillary tubes. Hiding the capillary tubes behind light fittings blending in with ceiling paintings or forming part of the ceiling sculptures can all be used to provide invisible smoke detection. In high volume atria applications such as cathedrals capillary sample points can be routed into the area at intermediate vertical levels to good effect to overcome stratification. The higher potential sensitivity of the VESDA system means that less smoke is required at the sample points to provide an alarm condition.With over 250000 aspirating smoke detectors installed worldwide the VESDA name has become synonymous with high quality and outstanding performance. An aspirating smoke detection system however only performs at its best with a well designed and installed quality pipework system. Xtralis manufacturer of VESDA detectors recognised this requirement and in 1997 launched its VESDA Pipe and Fittings range.Key FeaturesFor use with Red or White ABSOperating temperature range -40C to 70CLPCB approvedEN54 testedApplications Used inChurchesHospitalsMuseums GalleriesPrisonsLibrariesArchivesConcert HallsPlease Note The PIP-015 is equivalent to the REDASP025F.

GBP 9.07
1

Vesda Xtralis 25mm Flexible 1m Long Bend

Vesda Xtralis 25mm Flexible 1m Long Bend

Vesda Xtralis 25mm Flexible 1m Long BendWith over 250000 aspirating smoke detectors installed worldwide the VESDA name has become synonymous with high quality and outstanding performance. An aspirating smoke detection system however only performs at its best with a well designed and installed quality pipework system. Xtralis manufacturer of VESDA detectors recognised this requirement and in 1997 launched its VESDA Pipe and Fittings range.Always use tools specifically designed forplastic pipe.Protective gloves are recommended for usewhen solvent cementing. If hands come into contact with cement use a waterless abrasive soap.Avoid sources of heat or open flames when solvent cementing. Do not smoke.Always chamfer and deburr pipe ends.Use the proper solvent cement note air shipments of solvent cement are forbidden by law.Always replace lids on cans when not in use.Never dilute solvent cement.Keep jointing surfaces dry in wet weather.Avoid direct inhalation of fumes. Use in a well-ventilated area.Wipe up spills or leaks immediately with clean lint free cloth or paper towels.Follow recommended cure times prior to testing the system.Prevent excessive solvent cement from running into the pipe or fitting socket.The Integrity of air sampling systems may be affected if proper CPVC solvent cement is not used. The Safety Crewdisclaims responsibility for any air sampling pipe system constructed with cements other than those recommended.Please note The PIP-021 is equivalent to the REDFLXI25B.

GBP 24.38
1

Vesda Xtralis REDFLEXI25B 25mm Flexible 1m Long Bend

Vesda Xtralis REDFLEXI25B 25mm Flexible 1m Long Bend

Vesda Xtralis REDFLEXI25B 25mm Flexible 1m Long BendWith over 250000 aspirating smoke detectors installed worldwide the VESDA name has become synonymous with high quality and outstanding performance. An aspirating smoke detection system however only performs at its best with a well designed and installed quality pipework system. Xtralis manufacturer of VESDA detectors recognised this requirement and in 1997 launched its VESDA Pipe and Fittings range.Always use tools specifically designed forplastic pipe.Protective gloves are recommended for usewhen solvent cementing. If hands come into contact with cement use a waterless abrasive soap.Avoid sources of heat or open flames when solvent cementing. Do not smoke.Always chamfer and deburr pipe ends.Use the proper solvent cement note air shipments of solvent cement are forbidden by law.Always replace lids on cans when not in use.Never dilute solvent cement.Keep jointing surfaces dry in wet weather.Avoid direct inhalation of fumes. Use in a well-ventilated area.Wipe up spills or leaks immediately with clean lint free cloth or paper towels.Follow recommended cure times prior to testing the system.Prevent excessive solvent cement from running into the pipe or fitting socket.The Integrity of air sampling systems may be affected if proper CPVC solvent cement is not used. The Safety Crewdisclaims responsibility for any air sampling pipe system constructed with cements other than those recommended.Please note The PIP-021 is equivalent to the REDFLXI25B.

GBP 24.38
1