17 results (0,17611 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Trend KWJ700 Kitchen Worktop Jig 700mm

Trend KWJ700 Kitchen Worktop Jig 700mm

The Trend Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that enables cutting both parts of the joint in 15 minutes including setting up. The jig has the following features: Left and right hand corners, 400mm radius peninsular joint, 45 end cut with slight radius, 45 trade corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Engraved lines for 65mm bolts and worktop cross-cut. 6 x 10mm diameter ABS plastic pins with tapered shoulders for a tight fit and 3 point pin contact to ensure ease of setting up.

GBP 129.99
1

Trend KWJ900 Kitchen Worktop Jig 900mm TREKWJ900

Trend KWJ900 Kitchen Worktop Jig 900mm TREKWJ900

The Trend Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that enables cutting both parts of the joint in 15 minutes including setting up. The jig has the following features: Left and right hand corners, 400mm radius peninsular joint, 45 end cut with slight radius, 45 trade corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Engraved lines for 65mm bolts and worktop cross-cut. 6 x 10mm diameter ABS plastic pins with tapered shoulders for a tight fit and 3 point pin contact to ensure ease of setting up.

GBP 169.99
1

Trend Mortice & Tenon Jig MT/JIG TREMTJIG

Trend Mortice & Tenon Jig MT/JIG TREMTJIG

The Trend Mortice & Tenon Jig MT/JIG enables mortice, tenons and dowel joints to be cut with a router. Ideal for cabinets, chairs and table joints. There is a one set-up system for both mortice and tenon giving perfectly fitting joints and is fully adjustable for compound angle joints up to 45. The reversible templates can be used to produce round and square end tenons and for accurate dowelling applications. It cuts mortice and tenon sizes of 1/4in (6.35mm) to 5/8in (15.9mm). A Unibase may be required for certain makes and models of router. All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026). The width of the tenon is adjusted by using different guide bush diameters. International PCT Appl N. CNC precision manufactured plates and body. Guide bushes are included but cutters are required. Specification Material Thickness 12 - 47mm. Tenon Thickness 4.8 - 16mm. Angle Tilt Compound -10 to 45.

GBP 0.00
1

Draining Groove Jig DG/JIG TREDRAINJIG

Draining Groove Jig DG/JIG TREDRAINJIG

The Trend Draining Groove Jig is perfect for routing draining grooves in solid timber for Belfast type sinks. Made from 12mm hardwearing CNC machined phenolic. It provides a 0.5 fall with grooves at 50mm pitch and 455mm long. With sight marks for lining up and three removable sloping runners for support. There is also a cutter diameter check hole and fixing holes for user made stops for repetitious work. Includes 1 x Cove Cutter and 1 x Guide Bush (diameter 30mm). Specification Fall 0.5. Groove Pitch 50mm. Groove Length 455mm. Slat Width 19.8mm.

GBP 0.00
1

Trend Single Pocket Hole Jig TREPHJUGBS

Trend Single Pocket Hole Jig TREPHJUGBS

The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cabinets, furniture and small joinery projects with ease. The hardened drilling sleeves provide accurate, consistent pockets. There is also a handy built-in drill depth gauge that can be reversed for new or repair work. Works with timber thicknesses from 12mm to 38mm. Portable and adaptable. Supplied with 1 x Pack of Assorted Screws, 1 x 150mm Square Drive Bit and 1 x HSS Drill Bit with Collar.

GBP 37.99
1

Trend PH/DRILL/95 Pocket Hole Jig Replacement Stepped Drill 9.5mm TREPHDRILL95

Trend PH/DRILL/95 Pocket Hole Jig Replacement Stepped Drill 9.5mm TREPHDRILL95

The Trend PH/JIG Pocket Hole Jig is great for fast and accurate joining of timber and plywood, giving strong instant joints. Solid hardened bushes with a variable pitch of 29 to 63mm. Use on timber, MDF, plywood and blockboard. It allows a variety of joints to be created individually. Uses square drive self-tapping screws. Workpiece can be handled immediately after gluing and screwing, creating time-saving benefits. No clamps required.

GBP 27.99
1

Trend STAIR/A Staircase Jig TRESTAIRA

Trend STAIR/A Staircase Jig TRESTAIRA

This Trend STAIR/AStaircase Jig is a template jig with well proven means of routing out stair housings quickly and accurately. It is constructed from hard wearing compact grade high pressure laminate and includes a reversible fence for exact matching of stair strings and fully adjustable nosing piece. It has a built-in heavy duty front clamp for quick clamping for each trench. It is adjustable to suit private and common stair angle pitches and can be used with all heavy-duty routers over 1600 watts. The sub-base is pre-drilled to suit Trend/DeWalt/Elu 1/2-inch routers, for other makes the sub-base will have to be redrilled. Kit includes- 1 x Adjustable reversible clamp. 1 x Reversible clamp bar. 1 x Sub-base. 1 x Nose piece. 1 x Line up pin and bush. 2 x Spanners. Specifications Tread Thickness 22-32 mm. Slider Diameter 30 mm. Nosing Adjustment 16-19 mm. Length 585 mm. Height 485 mm. Width 12.5 mm. Weight 6.17kg.

GBP 219.99
1

Trend 3-in-1 Pocket Hole Jig TREPHJIGBK

Trend 3-in-1 Pocket Hole Jig TREPHJIGBK

Trend PH/JIG/BK 3-in-1 Pocket Hole Jig for fast and accurate joining of timber and plywood, giving strong instant joints. Multi-function design for twin hole or single hole pockets, perfect for wide or for narrow stock components. With reversible depth gauges, ideal for new projects and repair work. Hardened drilling sleeves for accurate, consistent pockets. Works with timber 12.7mm to 38mm thick. Portable and adaptable for multiple jointing styles and applications with tool-free, fast and easy set up. Build cabinets, furniture and small joinery projects with ease. Supplied with 50 x Assorted Screws, 1 x HSS Drill Bit with Collar, 1 x 150mm Square Drive Bit, 1 x Adaptor Plate, 1 x Hex Key 3mm A/F and 1 x Carry Case. Specification Timber Thicknesses 12.7-38mm Hole Pitch 28-50mm

GBP 72.99
1

Trend Kitchen Worktop Jig with Peninsular Cut 650mm TREKWJ650

Trend Kitchen Worktop Jig with Peninsular Cut 650mm TREKWJ650

Trend Kitchen Worktop Jig for worktops up to 650mm. Made from hard-wearing, CNC machined Compact Grade High-Pressure Laminate, 12mm thick. Cuts both parts of the joint in 15 minutes, including setting up. For cutting left and right-hand corners, 400mm radius peninsular joint and 35mm kitchen door hole. With fixed lengths for 600mm, 616mm, 635mm and 650mm wide worktops. Cuts worktops up to 40mm thick, with or without anti-drip postformed edge. It can also be used to cut 2 open ended bolt recesses (dog bone style) for 150mm bolts. & Oslash10mm plastic pins with tapered shoulders for tight fit provides 3-point pin contact to ensure ease of setting up. The pins are made from ABS plastic for strength.

GBP 99.99
1

Trend KWJ/Pin/4 Pins 10mm (4 Pack) TREKWJPIN

Trend KWJ/Pin/4 Pins 10mm (4 Pack) TREKWJPIN

The Trend Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that enables cutting both parts of the joint in 15 minutes including setting up. The jig has the following features: Left and right hand corners, 400mm radius peninsular joint, 45 end cut with slight radius, 45 trade corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Engraved lines for 65mm bolts and worktop cross-cut. 6 x 10mm diameter ABS plastic pins with tapered shoulders for a tight fit and 3 point pin contact to ensure ease of setting up.

GBP 16.99
1

Trend Vari Jig Angle Guide VJSAG36 TREVJSAG36

Trend Vari Jig Angle Guide VJSAG36 TREVJSAG36

The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25 to 155 and preset angle for 30, 45, 60, 90, 120, 135 and 150. The router working length at 90 is 915mm (36 inch), the circular saw working length at 90 is 780mm (30 3/4 inch). It has an angle tolerance & plusmn 0.2 with zeroing facility, adjustable position alloy extrusion with scale and requires three clamps. Will accept accessory friction clamps Ref. VJS/CK or VJS/CK/L.

GBP 109.99
1

Trend Unibase Universal Sub-Base for Guide Bushes - 170mm

Trend Unibase Universal Sub-Base for Guide Bushes - 170mm

The Trend UNIBASE is a Router Base Adaptor that allows other makes and models of routers to use the Trend Guide Bushes for increased diversity. The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Features: Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch Instructions for fitting: The line-up pin fits into the collet and is plunged through the router base The line-up bush is fitted into the Unibase and secured This is then placed over the line-up pin and rotated in order to line up the fixing holes The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes These range from 10mm up to 30mm (GB10 - GB32) For larger diameter cutters a 40mm guide bush (GB40) is available Ideal for hinge jig and lock jig Specification: Diameter: 170mm Thickness: 8mm Bore; 39mm Recess: 60mm Screw thread: 2BA

GBP 23.99
1