Pricemate

Sandvik Coromant CoroCut XS Carbide Blank MAXR3300H10F

CoroCut XS is a tangentially mounted system for precision machining in sliding head machines and lathes. The system is for external parting, grooving, turning, backturning and threading applications. The extremely sharp cutting edges perform best at low feeds.Features & Benefits- External turning, small diameters- Turning, threading, parting and grooving- Close tolerances- All inserts fit into the same tool holder- Internal grooving at very small diameters- Designed to maintain the tool holder intact in case of insert breakage.Application- Parting-off in sliding head machines- Precision grooving at low speeds and feeds

GBP 24.99

1

Sandvik Coromant CoroCut MB Solid Carbide Head for Grooving MB-09G120-00-14R1025

CoroCut MB is a high precision system for grooving, face grooving, profiling and pre-parting. The edge line of the cutting edge is sharp with a thin-layered coating, which in combination with the stability of the tools makes it ideal for internal machining.Features & Benefits- Internal turning, diameters from 10 mm- Turning, threading, parting and grooving- Close - Front-mounted exchangeable cutting tool- Sharp cutting edges- Geometries and grades for all materials- Carbide shanks for long overhangs- Through coolant- Easy fix clamping- Grooving tools in a large variety of widths and corner radii also for standardized grooves such as O-rings and circlip grooves.Application- Finish and precision machining at low feeds and speeds- For shallow grooves- Thread turning, turning, back boring, face grooving, profiling and pre-parting operations- Dedicated face grooving holder with nozzles for high precision coolant

GBP 37.99

1

Sandvik Coromant CoroCut MB Solid Carbide Head for Grooving MB-07G150-00-11R1025

CoroCut MB is a high precision system for grooving, face grooving, profiling and pre-parting. The edge line of the cutting edge is sharp with a thin-layered coating, which in combination with the stability of the tools makes it ideal for internal machining.Features & Benefits- Internal turning, diameters from 10 mm- Turning, threading, parting and grooving- Close - Front-mounted exchangeable cutting tool- Sharp cutting edges- Geometries and grades for all materials- Carbide shanks for long overhangs- Through coolant- Easy fix clamping- Grooving tools in a large variety of widths and corner radii also for standardized grooves such as O-rings and circlip grooves.Application- Finish and precision machining at low feeds and speeds- For shallow grooves- Thread turning, turning, back boring, face grooving, profiling and pre-parting operations- Dedicated face grooving holder with nozzles for high precision coolant

GBP 35.99

1

Sandvik Coromant CoroCut MB Solid Carbide Head for Grooving MB-09G150-00-14R1025

CoroCut MB is a high precision system for grooving, face grooving, profiling and pre-parting. The edge line of the cutting edge is sharp with a thin-layered coating, which in combination with the stability of the tools makes it ideal for internal machining.Features & Benefits- Internal turning, diameters from 10 mm- Turning, threading, parting and grooving- Close - Front-mounted exchangeable cutting tool- Sharp cutting edges- Geometries and grades for all materials- Carbide shanks for long overhangs- Through coolant- Easy fix clamping- Grooving tools in a large variety of widths and corner radii also for standardized grooves such as O-rings and circlip grooves.Application- Finish and precision machining at low feeds and speeds- For shallow grooves- Thread turning, turning, back boring, face grooving, profiling and pre-parting operations- Dedicated face grooving holder with nozzles for high precision coolant

GBP 37.99

1

Sandvik Coromant CoroCut MB Solid Carbide Head for Grooving MB-09G300-00-16R1025

CoroCut MB is a high precision system for grooving, face grooving, profiling and pre-parting. The edge line of the cutting edge is sharp with a thin-layered coating, which in combination with the stability of the tools makes it ideal for internal machining.Features & Benefits- Internal turning, diameters from 10 mm- Turning, threading, parting and grooving- Close - Front-mounted exchangeable cutting tool- Sharp cutting edges- Geometries and grades for all materials- Carbide shanks for long overhangs- Through coolant- Easy fix clamping- Grooving tools in a large variety of widths and corner radii also for standardized grooves such as O-rings and circlip grooves.Application- Finish and precision machining at low feeds and speeds- For shallow grooves- Thread turning, turning, back boring, face grooving, profiling and pre-parting operations- Dedicated face grooving holder with nozzles for high precision coolant

GBP 39.99

1

Sandvik Coromant CoroCut MB Solid Carbide Head for Grooving MB-09G200-02-16R1025

CoroCut MB is a high precision system for grooving, face grooving, profiling and pre-parting. The edge line of the cutting edge is sharp with a thin-layered coating, which in combination with the stability of the tools makes it ideal for internal machining.Features & Benefits- Internal turning, diameters from 10 mm- Turning, threading, parting and grooving- Close - Front-mounted exchangeable cutting tool- Sharp cutting edges- Geometries and grades for all materials- Carbide shanks for long overhangs- Through coolant- Easy fix clamping- Grooving tools in a large variety of widths and corner radii also for standardized grooves such as O-rings and circlip grooves.Application- Finish and precision machining at low feeds and speeds- For shallow grooves- Thread turning, turning, back boring, face grooving, profiling and pre-parting operations- Dedicated face grooving holder with nozzles for high precision coolant

GBP 39.99

1

Sandvik Coromant Stop for QS Holding System QS-A06

Tool type: Sliding head machinesQuick change for sliding head machinesMaximized machine utilizationQS holding system is a quick change system developed specifically for sliding head machines. The system of tool holders, stops and wedges offer stable tool clamping and secure insert edge position for good repeatability and accuracy.Process security with high precisionThe QS tool holders are available with precision coolant, which improves chip control, tool life and component quality. The coolant is easily connected thanks to dedicated coolant connection kits.Easy handling for reduced downtimeThe single screw release function simultaneously pulls out the wedge and holder, for quick tool change and set-up. No diameter adjustment is necessary thanks to the back stop, which ensures close repeatability tolerance for the insert edge position.Features & Benefits- Available with precision coolant, which improves chip control, tool life and component qualityApplication- Turning, parting, grooving and threading of small components- For machining in sliding head machines- Available for Citizen, Star, Tsugami, Hanwha, Tornos and Nexturn machines

GBP 37.99

1

Sandvik Coromant Stop for QS Holding System QS-A10

Tool type: Sliding head machinesQuick change for sliding head machinesMaximized machine utilizationQS holding system is a quick change system developed specifically for sliding head machines. The system of tool holders, stops and wedges offer stable tool clamping and secure insert edge position for good repeatability and accuracy.Process security with high precisionThe QS tool holders are available with precision coolant, which improves chip control, tool life and component quality. The coolant is easily connected thanks to dedicated coolant connection kits.Easy handling for reduced downtimeThe single screw release function simultaneously pulls out the wedge and holder, for quick tool change and set-up. No diameter adjustment is necessary thanks to the back stop, which ensures close repeatability tolerance for the insert edge position.Features & Benefits- Available with precision coolant, which improves chip control, tool life and component qualityApplication- Turning, parting, grooving and threading of small components- For machining in sliding head machines- Available for Citizen, Star, Tsugami, Hanwha, Tornos and Nexturn machines

GBP 37.99

1

Sandvik Coromant Stop for QS Holding System QS-A08

Tool type: Sliding head machinesQuick change for sliding head machinesMaximized machine utilizationQS holding system is a quick change system developed specifically for sliding head machines. The system of tool holders, stops and wedges offer stable tool clamping and secure insert edge position for good repeatability and accuracy.Process security with high precisionThe QS tool holders are available with precision coolant, which improves chip control, tool life and component quality. The coolant is easily connected thanks to dedicated coolant connection kits.Easy handling for reduced downtimeThe single screw release function simultaneously pulls out the wedge and holder, for quick tool change and set-up. No diameter adjustment is necessary thanks to the back stop, which ensures close repeatability tolerance for the insert edge position.Features & Benefits- Available with precision coolant, which improves chip control, tool life and component qualityApplication- Turning, parting, grooving and threading of small components- For machining in sliding head machines- Available for Citizen, Star, Tsugami, Hanwha, Tornos and Nexturn machines

GBP 37.99

1

Sandvik Coromant Coolant Connection Kit QS-HP100-M6-AN4-A

Tool type: Sliding head machinesQuick change for sliding head machinesMaximized machine utilizationQS holding system is a quick change system developed specifically for sliding head machines. The system of tool holders, stops and wedges offer stable tool clamping and secure insert edge position for good repeatability and accuracy.Process security with high precisionThe QS tool holders are available with precision coolant, which improves chip control, tool life and component quality. The coolant is easily connected thanks to dedicated coolant connection kits.Easy handling for reduced downtimeThe single screw release function simultaneously pulls out the wedge and holder, for quick tool change and set-up. No diameter adjustment is necessary thanks to the back stop, which ensures close repeatability tolerance for the insert edge position.Features & Benefits- Available with precision coolant, which improves chip control, tool life and component qualityApplication- Turning, parting, grooving and threading of small components- For machining in sliding head machines- Available for Citizen, Star, Tsugami, Hanwha, Tornos and Nexturn machines

GBP 24.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1308-M4415

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 19.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1312-M4425

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 19.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-VB1312-F4425

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 24.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1308-F2220

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 17.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1304-F4415

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 19.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-VB1312-F4415

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 24.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1304-F4425

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 19.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1308-M2220

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 17.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1308-M4425

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 19.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-VB1308-F4415

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 24.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1308-F4425

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 19.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-VB1304-F4415

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 24.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-VB1308-F2220

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 21.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1312-M4415

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 19.99

1

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1304-F2220

Product Range: CoroTurn TRTool Type: External turningStable external and internal profilingiLock DesignTools with iLock design have rails or serrations on the tool holder and corresponding slots on the insert for a tight locking. This prevents the cutting forces from affecting the tool position and ensures:- High stability and tolerances- Indexing repeatability- Insert location accuracy within 0.05 mm (0.002 inch)Chip control and process securityPre-directed precision nozzles create laminar jets of over and under coolant with high velocity, directed at the right place of the insert edge. It is the precision and character of these jets that make the difference in terms of chip control and process security.Handling efficiencyThe coolant is easily connected thanks to support from a large assortment of plug and play adaptors including Coromant Capto, VDI and machine specific adaptors for turning centres and QS stops (QS shanks) for sliding head machines.Features- Turning tools with single-sided inserts, iLock interface- Excellent stability for best component quality- Precision over and under coolantApplication- First choice for external profiling- Longitudinal turning- Medium and finishing applications- Turning centres, multi-task machining and large sliding head machines

GBP 17.99

1

Brand

Merchant

Price (EUR)

Sandvik Coromant CoroCut XS Carbide Blank MAXR3300H10F

Sandvik Coromant CoroCut MB Solid Carbide Head for Grooving MB-09G120-00-14R1025

Sandvik Coromant CoroCut MB Solid Carbide Head for Grooving MB-07G150-00-11R1025

Sandvik Coromant CoroCut MB Solid Carbide Head for Grooving MB-09G150-00-14R1025

Sandvik Coromant CoroCut MB Solid Carbide Head for Grooving MB-09G300-00-16R1025

Sandvik Coromant CoroCut MB Solid Carbide Head for Grooving MB-09G200-02-16R1025

Sandvik Coromant Stop for QS Holding System QS-A06

Sandvik Coromant Stop for QS Holding System QS-A10

Sandvik Coromant Stop for QS Holding System QS-A08

Sandvik Coromant Coolant Connection Kit QS-HP100-M6-AN4-A

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1308-M4415

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1312-M4425

Sandvik Coromant CoroTurn TR Insert for Turning TR-VB1312-F4425

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1308-F2220

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1304-F4415

Sandvik Coromant CoroTurn TR Insert for Turning TR-VB1312-F4415

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1304-F4425

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1308-M2220

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1308-M4425

Sandvik Coromant CoroTurn TR Insert for Turning TR-VB1308-F4415

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1308-F4425

Sandvik Coromant CoroTurn TR Insert for Turning TR-VB1304-F4415

Sandvik Coromant CoroTurn TR Insert for Turning TR-VB1308-F2220

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1312-M4415

Sandvik Coromant CoroTurn TR Insert for Turning TR-DC1304-F2220

Powered by Cobiro