Pricemate

Pramet Parting Off Turning Tool T8330

Pramet Parting Off Turning Tool T8330, Lathe Part: Lathe Insert, Thickness: 1.6mm, MPN: RSKITXLCFN-32-3-T8330

GBP 113.50

1

Pramet Parting Off Turning Tool T8330

Pramet Parting Off Turning Tool T8330, Lathe Part: Lathe Insert, Thickness: 4.1mm, MPN: RSKITXLCFN-32-4-T8330

GBP 117.34

1

Pramet Parting Off Turning Tool T8330

Pramet Parting Off Turning Tool T8330, Lathe Part: Lathe Insert, Thickness: 4.1mm, MPN: RSKITXLCFN-26-4-T8330

GBP 114.91

1

Pramet Parting Off Turning Tool, 110 mm T8330

Pramet Parting Off Turning Tool, 110 mm T8330, Lathe Part: Lathe Insert, Thickness: 3.1mm, MPN: RSKITXLCFN-26-3-T8330

GBP 106.28

1

Pramet CTFPR Lathe Tool Holder 91° Approach Angle, For Use With TPMR 1103

Pramet CTFPR Lathe Tool Holder 91° Approach Angle, For Use With TPMR 1103, Length: 180mm, Height: 20mm, MPN: S20Q-CTFPR 11

GBP 163.38

1

Pramet DU / D Lathe Tool Holder 90° Approach Angle, For Use With XLCFN 26

Pramet DU / D Lathe Tool Holder 90° Approach Angle, For Use With XLCFN 26, Length: 90mm, Height: 20mm, MPN: 26-DU 2020

GBP 214.81

1

Pramet DU / D Lathe Tool Holder 90° Approach Angle, For Use With XLCFN 32

Pramet DU / D Lathe Tool Holder 90° Approach Angle, For Use With XLCFN 32, Length: 110mm, Height: 25mm, MPN: 32-DU 2532

GBP 230.99

1

Pramet SCLCR/L Lathe Tool Holder 95° Approach Angle, For Use With CCMT 09T3

Pramet SCLCR/L Lathe Tool Holder 95° Approach Angle, For Use With CCMT 09T3, Length: 150mm, Height: 16mm, MPN: S16M-SCLCR 09-A

GBP 135.40

1

Pramet XLCFN B Lathe Tool Holder 90° Approach Angle, For Use With LFMX 2.2-

Pramet XLCFN B Lathe Tool Holder 90° Approach Angle, For Use With LFMX 2.2-, Length: 150mm, Height: 32mm, MPN: XLCFN 3201 M 2.00

GBP 110.29

1

Pramet XLCFN B Lathe Tool Holder 90° Approach Angle, For Use With LFMX 2.2-

Pramet XLCFN B Lathe Tool Holder 90° Approach Angle, For Use With LFMX 2.2-, Length: 110mm, Height: 26mm, MPN: XLCFN 2601 J 2.00

GBP 105.74

1

Pramet SCLC(RL) INT Lathe Tool Holder 95° Approach Angle, For Use With CCMT 0602

Pramet SCLC(RL) INT Lathe Tool Holder 95° Approach Angle, For Use With CCMT 0602, Length: 100mm, Height: 8mm, MPN: A08H-SCLCR 06

GBP 135.40

1

Pramet SDQC(RL) INT Lathe Tool Holder 107° Approach Angle, For Use With DCMT 11T3

Pramet SDQC(RL) INT Lathe Tool Holder 107° Approach Angle, For Use With DCMT 11T3, Length: 180mm, Height: 20mm, MPN: A20Q-SDQCR 11

GBP 171.77

1

Pramet PWLN(RL) INT Lathe Tool Holder 95° Approach Angle, For Use With WNMG 0604

Pramet PWLN(RL) INT Lathe Tool Holder 95° Approach Angle, For Use With WNMG 0604, Length: 180mm, Height: 20mm, MPN: A20Q-PWLNR 0604

GBP 191.08

1

Pramet MTJN(RL) EXT Lathe Tool Holder 93° Approach Angle, For Use With TNMG 1604

Pramet MTJN(RL) EXT Lathe Tool Holder 93° Approach Angle, For Use With TNMG 1604, Length: 125mm, Height: 20mm, MPN: MTJNR 2020 K 16

GBP 109.31

1

Pramet DCLN(RL) EXT Lathe Tool Holder 95° Approach Angle, For Use With CNMG 1204

Pramet DCLN(RL) EXT Lathe Tool Holder 95° Approach Angle, For Use With CNMG 1204, Length: 150mm, Height: 25mm, MPN: DCLNR 2525 M 12

GBP 115.90

1

Pramet DTGN(RL) EXT Lathe Tool Holder 90° Approach Angle, For Use With TNMG 1604

Pramet DTGN(RL) EXT Lathe Tool Holder 90° Approach Angle, For Use With TNMG 1604, Length: 125mm, Height: 20mm, MPN: DTGNR 2020 K 16

GBP 105.70

1

Pramet PWLN(RL) EXT Lathe Tool Holder 95° Approach Angle, For Use With WNMG 0604

Pramet PWLN(RL) EXT Lathe Tool Holder 95° Approach Angle, For Use With WNMG 0604, Length: 150mm, Height: 25mm, MPN: PWLNR 2525 M 0604

GBP 115.90

1

Pramet PWLN(RL) EXT Lathe Tool Holder 95° Approach Angle, For Use With WNMG 0604

Pramet PWLN(RL) EXT Lathe Tool Holder 95° Approach Angle, For Use With WNMG 0604, Length: 125mm, Height: 20mm, MPN: PWLNR 2020 K 0604

GBP 105.70

1

Pramet SDJC(RL) EXT Lathe Tool Holder 93° Approach Angle, For Use With DCMT 11T3

Pramet SDJC(RL) EXT Lathe Tool Holder 93° Approach Angle, For Use With DCMT 11T3, Length: 100mm, Height: 16mm, MPN: SDJCR 1616 H 11

GBP 104.04

1

Pramet PWLN(RL) INT Lathe Tool Holder 95° Approach Angle, For Use With WNMG 0604

Pramet PWLN(RL) INT Lathe Tool Holder 95° Approach Angle, For Use With WNMG 0604, Length: 300mm, Height: 25mm, Priced to Clear: Yes, MPN: S25T-PWLNR 0604

GBP 292.67

1

Pramet SCACL 1212 K 09-S External Turn Holder Left Hand

These screw clamp turning tool holders were designed to hold an 80 rhombus positive insert with an inscribed circle diameter of 9.525mm and a thickness of 3.97mm. Each tool holder is designed for left or right-handed use. 12mm tool height x 12mm width x 125mm long for taper turning, chamfering, and longitudinal turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability Typical Applications Hardened materials Cast iron Stainless steel Non-ferrous metals Steel Cast steel High-temperature alloys

GBP 102.99

1

Pramet SDJCL 1616 K 11-S External Turn Holder Left Hand

These screw clamp turning tool holders were designed to hold a 55 rhombus positive insert with an inscribed circle diameter of 9.525mm and a thickness of 3.97mm. Each tool holder is designed for left or right-handed use. 16mm tool height x 16mm width x 125mm long for taper turning, and longitudinal turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability Typical Applications Hardened materials Cast iron Stainless steel Non-ferrous metals Steel Cast steel High-temperature alloys

GBP 102.99

1

Pramet SCLCL 1616 K 09-S External Turn Holder Left Hand

These screw clamp turning tool holders were designed to hold an 80 rhombus positive insert with an inscribed circle diameter of 9.525mm and a thickness of 3.97mm. Each tool holder is designed for left or right-handed use. 16mm tool height x 16mm width x 125mm long for taper turning, chamfering, and longitudinal turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability Typical Applications Hardened materials Cast iron Stainless steel Non-ferrous metals Steel Cast steel High-temperature alloys

GBP 104.99

1

Pramet SCLCR 1212 K 09-S External Turn Holder Right Hand

These screw clamp turning tool holders were designed to hold an 80 rhombus positive insert with an inscribed circle diameter of 9.525mm and a thickness of 3.97mm. Each tool holder is designed for left or right-handed use. 12mm tool height x 12mm width x 125mm long for taper turning, chamfering, and longitudinal turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability Typical Applications Hardened materials Cast iron Stainless steel Non-ferrous metals Steel Cast steel High-temperature alloys

GBP 109.99

1

Pramet Sdxcr 1616 K 11-S External Turn Holder Right Hand

These screw clamp turning tool holders were designed to hold a 55 rhombus positive insert with an inscribed circle diameter of 9.525mm and a thickness of 3.97mm. Each tool holder is designed for left or right-handed use. 16mm tool height x 16mm width x 125mm long for taper turning, and longitudinal turning without shoulder. Features and Benefits Nickelized for higher oxidation and wear resistance Internal coolant channels improve insert tool life Improved chip evacuation provides high surface quality and reliability Typical Applications Hardened materials Cast iron Stainless steel Non-ferrous metals Steel Cast steel High-temperature alloys

GBP 102.99

1

Brand

Gender

Merchant

Price (EUR)

Pramet Parting Off Turning Tool T8330

Pramet Parting Off Turning Tool T8330

Pramet Parting Off Turning Tool T8330

Pramet Parting Off Turning Tool, 110 mm T8330

Pramet CTFPR Lathe Tool Holder 91° Approach Angle, For Use With TPMR 1103

Pramet DU / D Lathe Tool Holder 90° Approach Angle, For Use With XLCFN 26

Pramet DU / D Lathe Tool Holder 90° Approach Angle, For Use With XLCFN 32

Pramet SCLCR/L Lathe Tool Holder 95° Approach Angle, For Use With CCMT 09T3

Pramet XLCFN B Lathe Tool Holder 90° Approach Angle, For Use With LFMX 2.2-

Pramet XLCFN B Lathe Tool Holder 90° Approach Angle, For Use With LFMX 2.2-

Pramet SCLC(RL) INT Lathe Tool Holder 95° Approach Angle, For Use With CCMT 0602

Pramet SDQC(RL) INT Lathe Tool Holder 107° Approach Angle, For Use With DCMT 11T3

Pramet PWLN(RL) INT Lathe Tool Holder 95° Approach Angle, For Use With WNMG 0604

Pramet MTJN(RL) EXT Lathe Tool Holder 93° Approach Angle, For Use With TNMG 1604

Pramet DCLN(RL) EXT Lathe Tool Holder 95° Approach Angle, For Use With CNMG 1204

Pramet DTGN(RL) EXT Lathe Tool Holder 90° Approach Angle, For Use With TNMG 1604

Pramet PWLN(RL) EXT Lathe Tool Holder 95° Approach Angle, For Use With WNMG 0604

Pramet PWLN(RL) EXT Lathe Tool Holder 95° Approach Angle, For Use With WNMG 0604

Pramet SDJC(RL) EXT Lathe Tool Holder 93° Approach Angle, For Use With DCMT 11T3

Pramet PWLN(RL) INT Lathe Tool Holder 95° Approach Angle, For Use With WNMG 0604

Pramet SCACL 1212 K 09-S External Turn Holder Left Hand

Pramet SDJCL 1616 K 11-S External Turn Holder Left Hand

Pramet SCLCL 1616 K 09-S External Turn Holder Left Hand

Pramet SCLCR 1212 K 09-S External Turn Holder Right Hand

Pramet Sdxcr 1616 K 11-S External Turn Holder Right Hand

Powered by Cobiro