Pricemate

Nuaire AB-ECO-LP2 Ceiling Void Horizontal MVHR Unit

Nuaire ceiling void unit - ECO-LP2 Nuaire ceiling void unit Opposite hand - ECO-LP2-OH Description The new MRXBOXAB-ECO-LP2 is a Low-Profile ceiling mounted unit that is specificallydesigned to fit easily into apartments with ceiling void restrictions of only 200mm and has a high performance of 285m3/hr with low SFP of 0.56 wls Controllability is provided by optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO-LP2 Suitable for floor areas up to 170m2 Delivers an airflow rate of up to 285 m³/hour @ 100 Pa High heat recovery efficiency of up to 79%. 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G3 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: Manual 100% adjustment of background and boost speeds 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency

Nuaire MRXBOXAB-ECO4-1Z With Acoustic & Silent Box

Description Nuaire MRXBOXAB-ECO4B-1Z Opposite Handed MRXBOXAB-ECO4B-1Z-OH The Nuaire MRXBOXAB-ECO4B-1Z consists of the ECO4 MVHR unit, attenuators and flexible duct connectors entirely encased in an all-in-one aesthetically pleasing acoustic enclosure This kit provides significant reduction in cased-radiated noise The Nuaire MRXBOXAB-ECO4B provides a maximum flow rate of 555m3/hr suitable for a house up to 330 m2 floor area with up to 10 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO4B Acoustic enclosure on unit and Attenuator top box Attenuators and flexible duct connectors Suitable for floor areas up to 330m2 Delivers an airflow rate of up to 555 m³/hour @ 100 Pa High heat recovery efficiency of up to 94%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket

Nuaire MRXBOXAB-ECO5B Heat Recovery Unit

Nuaire MRXBOXAB-ECO5B Opposite Handed MRXBOXAB-ECO5B-OH Description The Nuaire MRXBOXAB-ECO5B provides a maximum flow rate of 495m3/hr suitable for a house up to 295 m2 floor area with up to 8 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO5B Suitable for floor areas up to 295m2 Delivers an airflow rate of up to 495 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Optional Acoustic enclosures Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV4 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF4 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the cupboard space easily

Nuaire MRXBOXAB-ECO3B Heat Recovery System

Description Nuaire MRXBOXAB-ECO3B Opposite Handed MRXBOXAB-ECO3B-OH The Nuaire MRXBOXAB-ECO3B provides a maximum flow rate of 320m3/hr suitable for a house up to 190 m2 floor area with up to 6 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX95 range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO3B Suitable for floor areas up to 190m2 Delivers an airflow rate of up to 320 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Optional Acoustic enclosures Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV3 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF3 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the

Nuaire MRXBOXAB-ECO3-1Z with Accoustic Enclosure & Silent Box

Description Nuaire MRXBOXAB-ECO3-1Z Opposite Handed MRXBOXAB-ECO3-1Z-OH The Nuaire MRXBOXAB-ECO3-1Z consists of the ECO3 MVHR unit, attenuators and flexible duct connectors entirely encased in an all-in-one aesthetically pleasing acoustic enclosure This kit provides significant reduction in cased-radiated noise The Nuaire MRXBOXAB-ECO3B provides a maximum flow rate of 320m3/hr suitable for a house up to 190 m2 floor area with up to 6 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX95 range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO3 Acoustic enclosure on unit and Attenuator top box Attenuators and flexible duct connectors Suitable for floor areas up to 190m2 Delivers an airflow rate of up to 320 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature

GBP 2960.52

Nuaire MRXBOXAB-ECO4 Heat Recovery System

Nuaire MRXBOXAB-ECO4B Opposite Handed MRXBOXAB-ECO4B-OH Description The Nuaire MRXBOXAB-ECO4B provides a maximum flow rate of 555m3/hr suitable for a house up to 330 m2 floor area with up to 10 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO4B Suitable for floor areas up to 330m2 Delivers an airflow rate of up to 555 m³/hour @ 100 Pa High heat recovery efficiency of up to 94%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Optional Acoustic enclosures Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV4 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF4 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the cupboard space easily and quickly

Brand

Merchant