Pricemate

Notifier DSS-PC-I02 Loop-Powered EN54-23 Open Category Detector Base Sounder Strobe - Red Flash cw Isolator

Notifier DSS-PC-I02 Loop-Powered EN54-23 Open Category Detector Base Sounder Strobe - Red Flash cw IsolatorFeaturing fast and simple installation and control the Opal base sounderVisual Alarm Device VAD forms the perfect base for Notifier Opal detectors. Powered by the fire panel via the loop wiring control of the devices is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesEN54-23Clear Lens with Red FlashWhite Body

GBP 75.25

1

Notifier NFXI-MM10 Ten-way Input Module with Loop Isolation

Notifier NFXI-MM10 Ten-way Input Module with Loop IsolationThe NFXI-MM10 provides an interface with normally open contact devices. The supervised state normal open circuit fault or short circuit alarm is sent back to the control panel. In Opal Digital Protocol only one address is used for the entire multimodule with sub-addresses completing the remaining addresses.For compatibility with existing installations using Notifier CLIP Protocol the first address is set from 01 to 90 the other modules are automatically assigned the next nine addresses up to six unused addresses can be disabled by dip switch.

GBP 655.45

1

Notifier UT232R-200 USB to RS232 UploadDownload Lead - Windows 10

Notifier UT232R-200 USB to RS232 UploadDownload Lead - Windows 10The UT232R-200 provides a simple method of adapting RS232 interfaces to modern USB ports. The adapter contains a small internal electronic circuit board mounted inside a rugged plastic enclosure capable of withstanding industrial temperature ranges. The integrated electronics also include RS232 line drivers to provide true RS232 signal levels.Key FeaturesThe Cable incorporates a standard USB-AFor Windows 10

GBP 12.41

1

Notifier ID3000 Extension Chassis Kit 020-559-001 Zone 1 to 65

Notifier ID3000 Extension Chassis Kit 020-559-001 Zone 1 to 65Extension chassis with Led display board for zone 1 to 65 to indicate fire and fault disablement test. Will also accept integral printer.

GBP 268.51

1

Notifier ID3000 Extension Chassis Kit 020-559-002 Zone 65 to 128

Notifier ID3000 Extension Chassis Kit 020-559-002 Zone 65 to 128Extension chassis with Led display board for zone 65 to 128 to indicate fire and fault disablement test. Will also accept integral printer.

GBP 308.26

1

Notifier Honeywell Key Cap 583311

Notifier Honeywell Key Cap 583311Transparent key cap to protect from accidental key presses. So pressing the keys is only made possible with an open cap. With one of these caps three horizontally arranged keys of a digital call station or a digital key module can be protected.

GBP 120.86

1

Notifier Honeywell Digital call station UIM multimode FO converter to DCS or UIM 583317.21

Notifier Honeywell Digital call station UIM multimode FO converter to DCS or UIM 583317.21Module required for connection of digital communication units DCS or universal interface module UIM to VARIODYN D1 via multimode optical fiber. If the system is in use for VA purposes it is necessary to provide power either from 24V DC source or from a battery Part No. HLSPS-DB2.DetailsOperating voltage 24 V DCCurrent consumption 24 V DC 500 mAWavelength 1308 nmRange 2 kmDimensions W 115 mm H 55 mm D 25 mm

GBP 666.00

1

Notifier NFX-MM1M Addressable Mini Monitor input module

Notifier NFX-MM1M Addressable Mini Monitor input moduleThe NFX-MM1M is an addressable input module. It will interface with contact devices such as security contacts sprinkler flow switches and call points. It monitors the cable in the same way as a non-addressable zone using an end of line resistor on a two wire circuit.In addition to transmitting the supervised state of the monitored device normal open or short the full analogue supervision measurement is sent back to the panel.The compact size allows it to fit inside devices or junction boxes behind devices. Its size and light weight allows it to be installed without the need to be rigidly mounted.

GBP 72.19

1

Notifier Honeywell ABT-M04 Microphone

Notifier Honeywell ABT-M04 MicrophoneThe ABT-M04 is a 4-button analogue microphone with built in gong push to talk and bi-colour LED indicating the ready-to-speak status.To operate the device first select the Zones by pressing designated buttons and then press MIC ON button the status LED will switch from red not ready for broadcast to steady green light. In the event of an active built in gong the status LED will turn green once the gong has ended. When finished transmitting the message release the MIC ON button to deactivate the goose-neck mic.DetailsOperating voltage 2057 VDCEciency 10 mV aOutput level 775 mVMaximum distance from amplier 250 mRecommended cable type UTPConnector Type 8P8C RJ45Dimensions withoutpackaging not more than 150 60 165 mmNet weight not more than 12 kg

GBP 502.86

1

Notifier IDR2-A Active Repeater Panel For ID50 ID60 amp ID2000

Notifier IDR2-A Active Repeater Panel For ID50 ID60 ID2000The IDR-2A active repeater will repeat the LCD LED indications on the main fire alarm panel and allow the operator to command the system using system control pushbuttons Mute Buzzer Accept Evacuate Silence Sounders Resound Sounders and Reset. Furthermore the IDR-2A has configuration and test functions such as edit Normal message Lamp Test LCD Test Buzzer Test and a Pushbutton Test option.For added security a key-switch on the front of the repeater enablesdisables certain push buttons. The nine LED indicators provide a quick summary of the general system status for the user. The compact design makes it very easy to install and commission the IDR Series repeaters. The repeaters event log can store up to 150 most recent events this also aids commissioning.Key FeaturesQuickly identify the location of a fire related incidentDesigned to comply with EN54 Part 2Simple connection to ID panelsActive Passive optionsPower diagnosticsPush button testLanguage optionsWindows based off-line configuration tool

GBP 855.82

1

Notifier IDR-6A Active Repeater Panel Stainless Steel 002-466

Notifier IDR-6A Active Repeater Panel Stainless Steel 002-466The IDR-2A active repeater will repeat the LCD LED indications on the main fire alarm panel and allow the operator to command the system using system control pushbuttons Mute Buzzer Accept Evacuate Silence Sounders Resound Sounders and Reset. Furthermore the IDR-2A has configuration and test functions such as edit Normal message Lamp Test LCD Test Buzzer Test and a Pushbutton Test option.For added security a key-switch on the front of the repeater enablesdisables certain push buttons. The nine LED indicators provide a quick summary of the general system status for the user. The compact design makes it very easy to install and commission the IDR Series repeaters. The repeaters event log can store up to 150 most recent events this also aids commissioning.Key FeaturesQuickly identify the location of a fire related incidentDesigned to comply with EN54 Part 2Simple connection to ID panelsActive Passive optionsPower diagnosticsPush button testLanguage optionsWindows based off-line configuration tool

GBP 1451.23

1

Notifier NFIX-RM6 Six-way Changeover Relay Output with Loop Isolation

Notifier NFIX-RM6 Six-way Changeover Relay Output with Loop IsolationThe six channel output module is designed for use in applications where numerous single modules are required. The monitor and control module can be used to supervise and activate sounders strobes door closers break glass call points waterflow switches and other ancillary devices.The NFXI-RM6 consists of six changeover relays. A single isolated set of dry relay contacts which can be wired as normally open or normally closed is provided for each address. The module enables the control panel to switch contacts on demand. The controlled circuit is not supervised. In Opal Digital Protocol only one address is used for the entire multimodule with sub-addresses completing the remaining addresses.

GBP 476.99

1

Notifier NFXI-OSI-RIE Addressable OSID-R Beam Detector - 5-100M Range

Notifier NFXI-OSI-RIE Addressable OSID-R Beam Detector - 5-100M RangeThe NFXI-OSI-RIE is an intelligent reflector- type linear optical beam smoke detector designed to operate as a component of fire alarm systems. The beam operates primarily on the principle of light obscuration utilising an Infra-Red beam. Optical beam smoke detectors are particularly appropriate for protecting buildings with large open spaces such as warehouses atriums etc.The NFXI-OSI-RIE detector is a combined transmitterreceiver unit that can be directly connected to an intelligent detector circuit.Key FeaturesCombined transmitter and receiver unit range 5-100 m 16-328 ftAddressable model for panels utilizing Advanced Protocol or CLIP mode SLC CommunicationComplies to EN54-12Wide 12 field of viewIntuitive beam alignment indicated by directional arrowsHighly resistant to building movementResistant to large solid intruding objectsAutomatic sensitivitythreshold level setting50 horizontal and 20 vertical beam alignmentBuilt-in heaterElectronic simulated smoke test from ground levelStandby fault and alarm LED indicators visible from the front and bottomAutomatic drift compensationPaintable coverRemovable plug-in terminal blocksOptional heater kit available for the reflector

GBP 1071.53

1

Notifier Honeywell Power Amplifier 4 x 300W 100V Class D 580248.11

Notifier Honeywell Power Amplifier 4 x 300W 100V Class D 580248.11Power amplifier for the voice alarm system VARIODYN D1 in class D technologies with four independent power channels and galvanic isolated 100 V direct outputs symmetric inputs inrush current limitation and soft start. In comparison to our 4XDxxxB series amplifiers one amplifier can back up another amplifier. Four built-in fans with smooth temperature controlled speed control.Key FeaturesBuilt- in electronic protective circuit against thermal overload DC signals sub frequent signals short circuit open outputs and HF interferenceIndividual status LEDs indicate channel CLIP PROTECT SIGNAL POWER LINE and 24 V DC power Back switch contact for sequential remote power2 back fault message contactsBack fault message contact for missing 24 V emergency power supply24 V emergency power supply inputSuitable for use with loop technology

GBP 4644.12

1

Notifier Honeywell Power Amplifier 4 x 500W 100V Class D 580249.11

Notifier Honeywell Power Amplifier 4 x 500W 100V Class D 580249.11Power amplifier for the voice alarm system VARIODYN D1 in class D technologies with four independent power channels and galvanic isolated 100 V direct outputs symmetric inputs inrush current limitation and soft start. In comparison to our 4XDxxxB series amplifiers one amplifier can back up another amplifier. Four built-in fans with smooth temperature controlled speed control.Key FeaturesBuilt- in electronic protective circuit against thermal overload DC signals sub frequent signals short circuit open outputs and HF interferenceIndividual status LEDs indicate channel CLIP PROTECT SIGNAL POWER LINE and 24 V DC power Back switch contact for sequential remote power2 back fault message contactsBack fault message contact for missing 24 V emergency power supply24 V emergency power supply inputSuitable for use with loop technology

GBP 8099.83

1

Notifier NFXI-BEAM Loop Powered Beam Detector

Notifier NFXI-BEAM Loop Powered Beam DetectorThe Opal addressable beam detector is an intelligent reflector type linear optical beam smoke detector designed to operate with Notifier addressable fire alarm systems. It operates primarily on the principle of light obscuration utilising infra-red light. The Infra-Red transmitter generates a beam of light towards a high efficiency reflect. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.Key Features5 100m operating range designed for the protection of buildings such as shopping centres heritage buildings warehouses and other structures with large open spacesEasy set-up and calibration with visual aids for both coarse and fine adjustmentLoop powered with built in isolation for system mappingUtilizes the advanced Opal digital protocol whilst remaining backward compatible with existing Notifier systemThe NFXI-BEAM-T Beam Detector features a unique remote test capability that fully tests both the optics and the electronics of the device. This means theres no need to hire a platform to give high level access to the device in testing.Two automatically variable sensitivity modes compensate for short term environmental changesAutomatic drift compensation compensates for long term sensitivity changes caused by environmental factorsFour fixed sensitivity level

GBP 878.53

1

Notifier NFXI-BEAM-T Loop Powered Beam Detector with Test Facility

Notifier NFXI-BEAM-T Loop Powered Beam DetectorThe Opal addressable beam detector is an intelligent reflector type linear optical beam smoke detector designed to operate with Notifier addressable fire alarm systems. It operates primarily on the principle of light obscuration utilising infra-red light. The Infra-Red transmitter generates a beam of light towards a high efficiency reflect. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.Key Features5 100m operating range designed for the protection of buildings such as shopping centres heritage buildings warehouses and other structures with large open spacesEasy set-up and calibration with visual aids for both coarse and fine adjustmentLoop powered with built in isolation for system mappingUtilizes the advanced Opal digital protocol whilst remaining backward compatible with existing Notifier systemThe NFXI-BEAM-T Beam Detector features a unique remote test capability that fully tests both the optics and the electronics of the device. This means theres no need to hire a platform to give high level access to the device in testing.Two automatically variable sensitivity modes compensate for short term environmental changesAutomatic drift compensation compensates for long term sensitivity changes caused by environmental factorsFour fixed sensitivity level

GBP 1026.98

1

Notifier WSO-PR-I02 Addressable Wall Mounted Sounder With Isolator

Notifier WSO-PR-I02 Addressable Wall Mounted Sounder With IsolatorHigh quality loop powered device designed to alert building occupants of an emergency. Featuring fast and simple installation and control it is powered by the fire panel via the loop wiring. Control of the device is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesFaster installation - The large cable access rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation.Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security.Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident.Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer.Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounderbeacon can be added without re-wiring.Reduced inventory count - Notifiers Opal AV range now utilizes the B501AP system base - common to detectors. The Opal AV range is designed to maximise the features of Notifiers advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder sounder beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.Colour Red

GBP 55.64

1

Notifier WSO-PP-I02 Addressable Wall Mounted Sounder With Isolator - White

Notifier WSO-PP-I02 Addressable Wall Mounted Sounder With Isolator - WhiteHigh quality loop powered device designed to alert building occupants of an emergency. Featuring fast and simple installation and control it is powered by the fire panel via the loop wiring. Control of the device is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesFaster installation - The large cable access rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation.Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security.Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident.Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer.Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounderbeacon can be added without re-wiring.Reduced inventory count - Notifiers Opal AV range now utilizes the B501AP system base - common to detectors. The Opal AV range is designed to maximise the features of Notifiers advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder sounder beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.

GBP 54.82

1

Notifier BSO-PP-I02 Addressable Loop-Powered Base Sounder - White cw Isolator

Notifier BSO-PP-I02 Addressable Loop-Powered Base Sounder - White cw IsolatorFeaturing fast and simple installation and control the Opal base sounder forms the perfect base for Notifier Opal detectors. Powered by the fire panel via the loop wiring control of the device is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesFaster installation - The large cable access rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation.Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security.Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident.Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer.Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounderbeacon can be added without re-wiring.Reduced inventory count - Notifiers Opal AV range now utilizes the B501AP system base- common to detectors. The Opal AV range is designed to maximise the features of Notifiers advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder sounder beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.EN54-3 approved.

GBP 50.39

1

Notifier BSO-BB-I02 Addressable Loop-Powered Base Sounder - Black cw Isolator

Notifier BSO-BB-I02 Addressable Loop-Powered Base Sounder - Black cw IsolatorFeaturing fast and simple installation and control the Opal base sounder forms the perfect base for Notifier Opal detectors. Powered by the fire panel via the loop wiring control of the device is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesFaster installation - The large cable access rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation.Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security.Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident.Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer.Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounderbeacon can be added without re-wiring.Reduced inventory count - Notifiers Opal AV range now utilizes the B501AP system base- common to detectors. The Opal AV range is designed to maximise the features of Notifiers advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder sounder beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.EN54-3 approved.

GBP 86.69

1

Notifier WSS-PR-I02 Addressable Wall Mounted Sounder Beacon amp Isolator

Notifier WSS-PR-I02 Addressable Wall Mounted Sounder Beacon IsolatorHigh quality loop powered device designed to alert building occupants of an emergency. Featuring fast and simple installation and control the Opal wall mount souderbeacon is powered by the fire panel via the loop wiring. Control of the devices is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesFaster installation - The large cable access rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation.Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security.Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident.Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer.Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounderbeacon can be added without re-wiring.Reduced inventory count - Notifiers Opal AV range now utilizes the B501AP system base - common to detectors. The Opal AV range is designed to maximise the features of Notifiers advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder sounder beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.Red FlashPure White BodyRed LensComes with Isolator

GBP 93.82

1

Notifier WSS-PC-I02 Addressable Wall Mounted Sounder Beacon amp Isolator Clear Lens

Notifier WSS-PC-I02 Addressable Wall Mounted Sounder Beacon Isolator Clear LensHigh quality loop powered device designed to alert building occupants of an emergency. Featuring fast and simple installation and control the Opal wall mount sounderbeacon is powered by the fire panel via the loop wiring. Control of the devices is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesFaster installation - The large cable access rear or surface cable entry options and innovative loop continuity spring all make for faster more cost-effective installation.Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security.Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident.Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer.Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounderbeacon can be added without re-wiring.Reduced inventory count - Notifiers Opal AV range now utilizes the B501AP system base - common to detectors. The Opal AV range is designed to maximise the features of Notifiers advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder sounder beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.Red FlashPure White BodyClear LensComes with Isolator

GBP 89.12

1

Notifier BSO-DD-I02 Addressable Loop-Powered Base Sounder - Ivory cw Isolator

Notifier BSO-DD-I02 Addressable Loop-Powered Base Sounder - Ivory cw IsolatorFeaturing fast and simple installation and control the Opal base sounder forms the perfect base for Notifier Opal detectors. Powered by the fire panel via the loop wiring control of the device is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesFaster installation - The large cable access rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation.Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an antitamper feature giving added security.Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident.Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer.Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounderbeacon can be added without re-wiring.Reduced inventory count - Notifiers Opal AV range now utilizes the B501AP system base- common to detectors. The Opal AV range is designed to maximise the features of Notifiers advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder sounder beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.EN54-3 approvedComes with isolatorPlease note The image is for illustrative purposes only. TheBSO-DD-I02 comes in the colour ivory.

GBP 77.28

1

Notifier 841153-0310 Bose FreeSpace FS2P Black - BS EN 54-24 - 16 Watt Pendant Loudspeaker

Notifier 841153-0310 Bose FreeSpace FS2P Black - BS EN 54-24 - 16 Watt Pendant LoudspeakerFreeSpace FS loudspeakers are the next step of our widely trusted line of in-ceiling and surface-mount loudspeakers offering significant upgrades in durability design and ease of installation all with remarkably consistent tonality.Engineered for high-quality performance in both background music and voice announcement applications FS loudspeakers are ideal for almost any commercial space. The line includes five loudspeakers two distinct levels of sound new mounting options and a modern aesthetic to match. For those seeking consistent quality installed sound FreeSpace FS loudspeakers are the perfect mix of performance and value.The FS2P is a dedicated pendant model with a full-range 2.25- inch transducer low frequency range down to 83 Hz and sensitivity of 87 dB SPL 1W 1m.Key FeaturesMaintain consistent tonal quality with shared voicing across all FS modelsHear the best of both music and voice with transducers that offer clear voice reproduction and smooth response for background musicCustomize systems with confidence using in-ceiling surface-mount and pendant-mount options allowing for tailored mix-and match installations. DesignMax subwoofers and larger models can expand your system design options even furtherBlend with more room designs with updated enclosures available in black and white that pair modern aesthetics with practical features including removable logosTackle site-specific challenges with the support of a full suite of accessories designed to handle a wide range of applications and mounting optionsInstall with ease all models feature Euroblock inputs and front-baffle input location on in-ceiling modelsSupport public safety EN54-24 for Voice Alarm Systems for Fire Detection and Fire Alarm Systems for Buildings.UL 1480 UUMW listed for use in fire alarm and signalling systems in life safety applicationsStylish pendant enclosure with single-point suspension perfect for open-ceiling applications or any installation requiring the aesthetic and performance capabilities of a pendant design

GBP 703.16

1

Brand

Merchant

Price (EUR)