86 results (0,34273 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Makita DUS158Z LXT Backpack Garden Sprayer 15L 18V Bare Unit

Makita DUS158Z LXT Backpack Garden Sprayer 15L 18V Bare Unit

The MakitaDUS158 LXT Backpack Garden Sprayer is compact and lightweight, designed for easy handling and greater manoeuvrability.Equipped with lock on function for continuous use, the paddle switch is located under the grip of the spray wand to allow easy control of spraying.Supplied with a 1.7 metre hose and ergonomic harness.Comes as a Bare Unit, NO battery or charger supplied.Specifications:Tank Capacity: 15 litre.Hose Length: 1.7m.Max. Pressure: 0.5 mPa.

GBP 279.99
1

Makita 9237CB/2 180mm 1, 200W Polisher - 240V

Makita 9237CB/2 180mm 1, 200W Polisher - 240V

9237CB - 180mm 1,200w Polisher - 240V Featuring: Ergonomically designed loop "D" handle with rubberised soft grip provides great user control. Double Insulation. Elastomer bumpers on gear housing protects a precious surface, such as a car body from damage and scratches. Screw down type vent dust cover prevents ingress of wool fibres. Constant speed control gives consistant speed performance even under load. Soft start feature. Variable speed control dial. Comes with: Wool pad. Sleeve. Hex wrench.

GBP 279.99
1

Makita HM1101C SDS Max Demolition Hammer (110V)

Makita HM1101C SDS Max Demolition Hammer (110V)

This Makita SDS drill makes light work of all chiselling jobs in concrete, brick and stone The Makita HM1101C is a high-performance demolition hammer with an easy-to-hold barrel design. Its D-shaped handle swivels 360 degrees to your desired position and rubberised grip provides the utmost comfort during prolonged use. This model provides constant speed, even under load for optimum work rate and productivity. Features: SDS-MAX tool-holder with one-touch sliding chuck for easy bit changes High-performance motor and durable design Easy to operate slide switch for variable speed Rubberised soft grip provides more comfort and enhanced control Constant speed under load Soft start for suppressing start-up reaction Dynamic ergonomic design and rubber handle Side handle for increased user comfort Double Insulation LED service light that indicates when to replace carbon brushes The tool is intended for chiselling work in concrete, brick, stone and asphalt as well as for driving and compacting with appropriate accessories Comes with: Carry case Specification: Impact energy: 11.5 J Blows per minute: 1100-2660 bpm Bit Angle Setting: 12 Stage Vibration: Chiselling: 13.4 m/sec_ Net weight: 7.0 kg Wattage: 1300 w

GBP 639.99
1

Makita CC301DZ - 10.8V CXT Tile Cutter - Body Only

Makita CC301DZ - 10.8V CXT Tile Cutter - Body Only

CC301 The Makita cordless tile cutter equipped with a diamond blade, nickel plated base which protects the steel from corrosion, multi-contact terminals to ensure stable contact even under extreme work vibration conditions, 500ml water tank and tap to control the flow of water used to cool the blade. User Benefits: Slide type Li-ion battery Ergonomically designed handle On-tool storage for hex wrench. Bevel cuts up to 45 degrees Large easy-fill water supply bottle High power Designed for cutting glass and ceramic tile Lock-off button for safe operation

GBP 112.99
1

Makita CC301DWAE - 10.8V CXT Tile Cutter - 2X2.0AH

Makita CC301DWAE - 10.8V CXT Tile Cutter - 2X2.0AH

CC301 The Makita cordless tile cutter equipped with a diamond blade, nickel plated base which protects the steel from corrosion, multi-contact terminals to ensure stable contact even under extreme work vibration conditions, 500ml water tank and tap to control the flow of water used to cool the blade. User Benefits: Slide type Li-ion battery Ergonomically designed handle On-tool storage for hex wrench. Bevel cuts up to 45 degrees Large easy-fill water supply bottle High power Designed for cutting glass and ceramic tile Lock-off button for safe operation

GBP 209.99
1

Makita GA5021C Paddle Switch Angle Grinder 125mm 1450W 110V MAKGA5021CL

Makita GA5021C Paddle Switch Angle Grinder 125mm 1450W 110V MAKGA5021CL

The Makita GA5021C Angle Grinder has a large, easy to operate paddle switch and highly effective Super Joint System (SJS). It is double insulated to protect against dust and dirt, has a soft start mechanism and holds constant speed under load. This machine also features an electronic current limiter, anti-restart and constant speed control, along with an anti-vibration side handle. Supplied with: 1 x Side Handle, 1 x Lock Nut Wrench, 1 x Wheel Guard. Specifications: Input Power: 1,450W.No Load Speed: 10,000/min.Max. Wheel Diameter: 125mm.Bore Diameter: 22mm.Spindle Size: M14 x 2mm.Weight: 2.5kg.

GBP 179.99
1

Makita GA5021C Paddle Switch Angle Grinder 125mm 1450W 240V MAKGA5021C

Makita GA5021C Paddle Switch Angle Grinder 125mm 1450W 240V MAKGA5021C

The Makita GA5021C Angle Grinder has a large, easy to operate paddle switch and highly effective Super Joint System (SJS). It is double insulated to protect against dust and dirt, has a soft start mechanism and holds constant speed under load. This machine also features an electronic current limiter, anti-restart and constant speed control, along with an anti-vibration side handle. Supplied with: 1 x Side Handle, 1 x Lock Nut Wrench, 1 x Wheel Guard. Specifications: Input Power: 1,450W.No Load Speed: 10,000/min.Max. Wheel Diameter: 125mm.Bore Diameter: 22mm.Spindle Size: M14 x 2mm.Weight: 2.5kg.

GBP 179.99
1

SP6000J 165mm Plunge Saw 1300W 240V

SP6000J 165mm Plunge Saw 1300W 240V

The Makita SP6000J Plunge Saw features a depth stopper for splinter-free cutting. It has a kick-resistant design and comes complete with a MAKPAC connector case. Fitted with a soft start feature and electronic speed control for constant speed under load. Specification Input Power 1,300W No Load Speed 2,000-5,200/min. Blade 165 x 20mm bore Depth of Cut @90 55mm, @45 39mm Weight 4.2kg All vibration figures quoted are Tri-axial to EN60745 2006. Noise Sound Pressure 91 dB(A) Noise Sound Power 102 dB(A) Noise K Factor 3 dB(A) Vibration K Factor 1.5 m/sec Vibration Cutting Chipboard 2.5 m/sec

GBP 0.00
1

Makita SP6000J Plunge Saw 165mm 1300W 110V MAKSP6000J1L

Makita SP6000J Plunge Saw 165mm 1300W 110V MAKSP6000J1L

The Makita SP6000J Plunge Saw features a depth stopper for splinter-free cutting. It has a kick-resistant design and comes complete with a MAKPAC connector case. Fitted with a soft start feature and electronic speed control for constant speed under load. Specification Input Power 1,300W No Load Speed 2,000-5,200/min. Blade 165 x 20mm bore Depth of Cut @90 55mm, @45 39mm Weight 4.2kg All vibration figures quoted are Tri-axial to EN60745 2006. Noise Sound Pressure 91 dB(A) Noise Sound Power 102 dB(A) Noise K Factor 3 dB(A) Vibration K Factor 1.5 m/sec Vibration Cutting Chipboard 2.5 m/sec

GBP 599.99
1

Makita SP6000J 165mm Plunge Saw (240V)

Makita SP6000J 165mm Plunge Saw (240V)

The Makita SP6000J Plunge Saw features a depth stopper for splinter-free cutting. It has a kick-resistant design and comes complete with a MAKPAC connector case. Fitted with a soft start feature and electronic speed control for constant speed under load. Specification Input Power 1,300W No Load Speed 2,000-5,200/min. Blade 165 x 20mm bore Depth of Cut @90 55mm, @45 39mm Weight 4.2kg All vibration figures quoted are Tri-axial to EN60745 2006. Noise Sound Pressure 91 dB(A) Noise Sound Power 102 dB(A) Noise K Factor 3 dB(A) Vibration K Factor 1.5 m/sec Vibration Cutting Chipboard 2.5 m/sec

GBP 359.99
1

Makita 9564PCV 4.5 inch/115mm Angle Grinder (240V)

Makita 9564PCV 4.5 inch/115mm Angle Grinder (240V)

Makita 9564PCV 115mm/4 1/2" Angle Grinder complete with lock nut and wrench, inner flange, AVT side handle and wheel guard. Available in 110 or 240 volts. This Angle Grinder has a high powered motor making it ideal for prolonged use in demanding applications. Features: High power 1400w anti-dust motor. Ideal for prolonged use in demanding applications. Compact Double insulated for added safety Variable speed trigger Soft start Constant speed under load Comes with: Lock Nut Lock Nut Wrench Inner Flange AVT Side handle Wheel Guard Specification: Wheel size: 125mm Bore Size: 22mm No Load Speed: 2800-11000rpm Net Weight: 1.8Kgs Available in 110 and 240 volts

GBP 189.99
1

Makita 9404 Variable Speed Belt Sander 1010W 110V

Makita 9404 Variable Speed Belt Sander 1010W 110V

The Makita 9404 Belt Sander with variable speed control is able to provide constant speed under load.It is fitted with a high-power motor for stock removal and a flat top for inverted applications. The tool is double insulated for increased user protection and it is fitted with a long cable, for sanding runs. Supplied with: 1 x Abrasive Belt, 1 x Cork/Carbon Pad, 1 x Dust Bag. Specifications: Input Power: 1,010W.No Load Speed: 210-440/min.Belt Size: 100 x 610mm.Weight: 4.8kg. Vibration sanding: 2.5m/sec.Vibration K factor: 1.5m/sec.Noise sound power: 96 dB(A).Noise sound pressure: 85 dB(A).Noise K factor: 3 dB(A).

GBP 339.99
1

Makita 9404 Variable Speed Belt Sander 1010W 240V

Makita 9404 Variable Speed Belt Sander 1010W 240V

The Makita 9404 Belt Sander with variable speed control is able to provide constant speed under load.It is fitted with a high-power motor for stock removal and a flat top for inverted applications. The tool is double insulated for increased user protection and it is fitted with a long cable, for sanding runs. Supplied with: 1 x Abrasive Belt, 1 x Cork/Carbon Pad, 1 x Dust Bag. Specifications: Input Power: 1,010W.No Load Speed: 210-440/min.Belt Size: 100 x 610mm.Weight: 4.8kg. Vibration sanding: 2.5m/sec.Vibration K factor: 1.5m/sec.Noise sound power: 96 dB(A).Noise sound pressure: 85 dB(A).Noise K factor: 3 dB(A).

GBP 339.99
1

Makita 9565PCV Angle Grinder 125MM 1400W Paddle Switch 240V

Makita 9565PCV Angle Grinder 125MM 1400W Paddle Switch 240V

Choose the best speed suited to the application with this Variable Speed Angle Grinder from Makita Powerful 13.0 AMP motor delivers more output and variable (2, 800 - 10, 500) RPM The Makita 9565PCV features SJS technology which is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop. On the rear of the machine is a variable speed control dial giving much more control and enabling the user to match the speed to the application. Constant speed control automatically applies additional power to the motor to maintain speed under load. Soft start suppresses start-up reaction for smooth start-ups and longer gear life. Electronic current limiter helps protect the motor from overload. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Slide switch with lock-on setting for continuous use. "Tool-less" wheel guard adjustment for easy adjustment. Zig-zag varnish protects the armature coil from dust and debris for longer tool life Features: High power 1400w anti-dust motor Ideal for prolonged use in demading applications Variable speed trigger Soft start Constant speed under load Double insulated for added safety Comes with: Lock Nut Lock Nut Wrench Inner Flange AVT Side Grip Wheel Guard Specification: Wheel size: 125mm Bore Size: 22mm No Load Speed: 2800-11000rpm Input Wattage: 1400w Spindle Size: M14 x 2mm Net Weight: 1.8Kgs

GBP 189.99
1

Makita 9565PCV 5 Inch/125mm Angle Grinder with Variable Speed (110V)

Makita 9565PCV 5 Inch/125mm Angle Grinder with Variable Speed (110V)

This Makita Grinder 110V is high powered, ideal for prolonged use in demanding applications The Makita 9565PCV is a powerful 125mm Angle Grinder with 13AMP motor. It features SJS technology which is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop. Variable speed control allows you to match the speed to the application and soft start means that it gradually builds up to its optimum rpm. This model is able to maintain speed under load. It has an electronic current limiter which helps protect the motor from overload and a Labyrinth construction which protects the motor from dust. Features: Soft start Variable speed trigger High power 1400W motor Constant speed even under load Double insulated for added safety Ideal for prolonged use in demanding applications Electronic current limiter helps protect the motor from overload Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life Features SJS technology which is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop Comes with: Lock Nut Inner Flange Wheel Guard AVT Side Grip Lock Nut Wrench Specification: Bore Size: 22mm Net Weight: 1.8Kg Wheel size: 125mm Input Wattage: 1400w Spindle Size: M14 x 2mm No Load Speed: 2800-11000rpm

GBP 199.99
1

Makita HM1213C SDS Max Demolition Hammer 1500W 240V MAKHM1213C

Makita HM1213C SDS Max Demolition Hammer 1500W 240V MAKHM1213C

The Makita HM1213C SDS Max Demolition Hammer offers high durability and excellent demolition performance. Anti-vibration technology ensures extra-low vibration performance. Suppression of motor speed during no-load reduces vibration of the tool body. The bit can be set at 12 positions for convenience. The one-touch sliding chuck makes it easy to install and remove bits. The LED lamp indicates when to replace the carbon brush. Other features include variable speed, constant speed under load and soft start. Specifications: Input Power: 1,500W.Impact Rate: 950-1,900/bpm.Impact Energy: 18.6 joules.Weight: 10.8kg. Vibration Chiselling: 7 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Power: 95 dBA.Noise Sound Pressure: 75 dBA.Noise K factor: 2.53 dBA.

GBP 829.99
1

Makita HM1213C SDS Max Demolition Hammer 1500W 110V MAKHM1213CL

Makita HM1213C SDS Max Demolition Hammer 1500W 110V MAKHM1213CL

The Makita HM1213C SDS Max Demolition Hammer offers high durability and excellent demolition performance. Anti-vibration technology ensures extra-low vibration performance. Suppression of motor speed during no-load reduces vibration of the tool body. The bit can be set at 12 positions for convenience. The one-touch sliding chuck makes it easy to install and remove bits. The LED lamp indicates when to replace the carbon brush. Other features include variable speed, constant speed under load and soft start. Specifications: Input Power: 1,500W.Impact Rate: 950-1,900/bpm.Impact Energy: 18.6 joules.Weight: 10.8kg. Vibration Chiselling: 7 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Power: 95 dBA.Noise Sound Pressure: 75 dBA.Noise K factor: 2.53 dBA.

GBP 829.99
1

Makita 9403 Belt Sander 100MM 110V

Makita 9403 Belt Sander 100MM 110V

The Makita 9911 Belt Sander has a compact design but still offers the highest capacity of sanding and dust collection among the same class sanders. Fitted with a variable speed control by dial to suit the operator's needs. It offers constant speed under load and is double insulated, for additional user protection. Supplied with 1 x Dust Bag and 1 x Abrasive Belt Specifications Input Power 650W. No Load Speed 75-270/min. Belt Size 76 x 457mm. Weight 2.7kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Sanding 2.5 m/sec. Vibration K Factor 1.5 m/sec. Noise Sound Power 94 dB(A). Noise Sound Pressure 83 dB(A). Noise K Factor 3 dB(A).

GBP 259.99
1

Makita HM1101C SDS Max AVT Demolition Hammer 1300W 110V MAKHM1101CL

Makita HM1101C SDS Max AVT Demolition Hammer 1300W 110V MAKHM1101CL

The Makita HM1101C SDS Max AVT Demolition Hammer is fitted with a one-touch sliding chuck for easy bit changes. The soft start feature ensures a smooth start every time and it has constant speed under load.The tool has double insulation to increase user safety. It is perfect for chiselling work in concrete, brick, stone and asphalt as well as for driving and compacting with appropriate accessories.It is supplied with a bull point, bit grease, side handle and a carry case. Specifications: Input Power: 1,300W.Impact Rate: 1,100-2,660/bpm.Impact Energy: 11.2 joules.Bit Angle Setting: 12 Stage.Weight: 7.0kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration chiselling : 13.4 m/sec.

GBP 629.99
1

Makita GD0800C/2 750W High Speed Die Grinder 240V

Makita GD0800C/2 750W High Speed Die Grinder 240V

The Makita GD0800C 6mm capacity collet, high speed slow start, constant speed under load die grinder is fitted with a lockable on/off switch and ergonomically designed slim body which allows the user the option of gripping the machine in any position to allow for greater comfort and enabling the machine to be used in tight spots. Fitted with Makita's `SJS' super joint system which helps prevent kickback when in use the internal construction of this machine has been designed in a labyrinth construction to help protect the bearings and motor from contamination. Ideally used with mounted points and tungsten burrs the Makita GD0800C is a must for any welder wishing to clean welds after welding.

GBP 279.99
1

Makita GD0800C High Speed Die Grinder (110V)

Makita GD0800C High Speed Die Grinder (110V)

The Makita GD0800C 6mm capacity collet, high speed slow start, constant speed under load die grinder is fitted with a lockable on/off switch and ergonomically designed slim body which allows the user the option of gripping the machine in any position to allow for greater comfort and enabling the machine to be used in tight spots. Fitted with Makita's `SJS' super joint system which helps prevent kickback when in use the internal construction of this machine has been designed in a labyrinth construction to help protect the bearings and motor from contamination. Ideally used with mounted points and tungsten burrs the Makita GD0800C is a must for any welder wishing to clean welds after welding.

GBP 269.99
1