Pricemate

1/2in x 1/2in x 1/8in x 24in Brass Bar Equal Angle CW614N/CZ121 - 5 Pieces

Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance. Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

GBP 0.00

1

4x 1/2in x 24in Brass Bar Square CW614N/CZ121 - 5 Piece

Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance. Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

GBP 255.96

1

Indexa 1in x 1in x 1/8in x 24in Brass Bar Equal Angle CW614N/CZ121 - 5 Pieces

Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance. Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

GBP 52.99

1

Indexa 3/4in x 3/4in x 1/8in x 24in Brass Bar Equal Angle CW614N/CZ121 - 5 Pieces

Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance. Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

GBP 35.99

1

Indexa 25mm x 500mm Brass Round Bar CW614N/CZ121- 1 Piece

Brass alloy CW614N / CZ121 is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance. Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

GBP 33.99

1

Indexa 1in x 24in Brass Hexagon Bar CW614N/CZ121 -1 Piece

Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance. Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

GBP 53.99

1

Indexa 15mm x 500mm Brass Hexagon Bar CW614N/CZ121 - 5 Piece

Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance. Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

GBP 72.99

1

Indexa 1in x 24in Brass Bar Square CW614N/CZ121 - 1 Piece

Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance. Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

GBP 56.99

1

Indexa 1/2in x 1/4in x 24in Brass Bar Flat CW614N/CZ121 - 4 Pieces

Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance. Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

GBP 29.99

1

Indexa 2in x 2in x 1/8in x 24in Brass Bar Equal Angle CW614N/CZ121 - 1 Piece

Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance. Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

GBP 41.99

1

Indexa 3/4in x 1/4in x 24in Brass Bar Flat CW614N/CZ121 - 4 Pieces

Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance. Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

GBP 36.99

1

Indexa 1in x 24in Brass Round Bar CW614N/CZ121 - 1 Pieces

Brass alloy CW614N / CZ121 is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance. Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

GBP 37.99

1

9x Indexa 600mm x 300mm x 0.70mm Brass Sheet CW508L/CZ108HH -1PCS

CW508L / CZ108HH is a high purity cold forming brass. It is used when severe bending properties are required. It can be machined but only with slow speeds and very light feeds. Often used for general purpose applications and forming operations when very good bending properties are required. Also offers very good general corrosion resistance in many natural atmospheres, a reasonable machinability and good cold heading properties Used for a variety of decorative components as well as general components such as heat exchangers, lamp caps, lamp-holder and switch components, general copper-smithing work, chains, eyelets, fasteners, hinges, locks, instrument covers and blanked articles such as instrument plates and wheels. Other uses include cold headed items including pins, rivets, screws, springs, radiator tanks and torch cases.

GBP 359.91

1

Indexa 600mm x 300mm x 1.6mm Brass Sheet CW508L/CZ108HH - 1 Piece

CW508L / CZ108HH is a high purity cold forming brass. It is used when severe bending properties are required. It can be machined but only with slow speeds and very light feeds. Often used for general purpose applications and forming operations when very good bending properties are required. Also offers very good general corrosion resistance in many natural atmospheres, a reasonable machinability and good cold heading properties Used for a variety of decorative components as well as general components such as heat exchangers, lamp caps, lamp-holder and switch components, general copper-smithing work, chains, eyelets, fasteners, hinges, locks, instrument covers and blanked articles such as instrument plates and wheels. Other uses include cold headed items including pins, rivets, screws, springs, radiator tanks and torch cases.

GBP 79.99

1

Indexa 10MMx500MM Brass Round BARCW614N/CZ121 (1 Pce)

These brass round bars are manufactured from a brass alloy CZ121 / CW614N that is primarily used for machining. Each bar has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. Available in two diametersm with both products measuring 500mm in length.Features and Benefits The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance Available in two sizes to suit your requirements Both products possess good conductivity, corrosion resistance and spark resistance for all around durabilityTypical Applications Typically used for a wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers,butts, hinges and also locks and components for watchesNotes Cold working is poor and is not recommended with these bars

GBP 7.99

1

Indexa 8MMx500MM Brass Round BARCW614N/CZ121 (1 Pce)

These brass round bars are manufactured from a brass alloy CZ121 / CW614N that is primarily used for machining. Each bar has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. Available in two diametersm with both products measuring 500mm in length.Features and Benefits The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance Available in two sizes to suit your requirements Both products possess good conductivity, corrosion resistance and spark resistance for all around durabilityTypical Applications Typically used for a wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers,butts, hinges and also locks and components for watchesNotes Cold working is poor and is not recommended with these bars

GBP 7.99

1

Indexa 6MMx500MM Brass Hexagon BARCW614N/CZ121 (1 Pce)

Manufactured from CW614N/CZ121 specification brass alloy, these hexagonal bars are ideal for making intricate and useful engineering components. This type of brass is the most widely used of all the brasses due to its suitability for high speed machining operations. Suited for hot formability as opposed to cold working, the product can be purchased in a range of diameters, all with a 500mm length.Features and Benefits Hexagonal shape helps you to reduce material wastage, saving you from milling the material down from a larger amount of brass The bars possess the highest machinability of any copper alloy Excellent hot formability for accurate results Good corrosion resistance for all around quality of performance and longevity Available in a variety of sizes and specifications, all 500mm in length to suit your exact requirementsTypical Applications Generally used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 2.79

1

Indexa 12MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

Manufactured from CW614N/CZ121 specification brass alloy, these hexagonal bars are ideal for making intricate and useful engineering components. This type of brass is the most widely used of all the brasses due to its suitability for high speed machining operations. Suited for hot formability as opposed to cold working, the product can be purchased in a range of diameters, all with a 500mm length.Features and Benefits Hexagonal shape helps you to reduce material wastage, saving you from milling the material down from a larger amount of brass The bars possess the highest machinability of any copper alloy Excellent hot formability for accurate results Good corrosion resistance for all around quality of performance and longevity Available in a variety of sizes and specifications, all 500mm in length to suit your exact requirementsTypical Applications Generally used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 10.99

1

5x Indexa 18MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

Manufactured from CW614N/CZ121 specification brass alloy, these hexagonal bars are ideal for making intricate and useful engineering components. This type of brass is the most widely used of all the brasses due to its suitability for high speed machining operations. Suited for hot formability as opposed to cold working, the product can be purchased in a range of diameters, all with a 500mm length.Features and Benefits Hexagonal shape helps you to reduce material wastage, saving you from milling the material down from a larger amount of brass The bars possess the highest machinability of any copper alloy Excellent hot formability for accurate results Good corrosion resistance for all around quality of performance and longevity Available in a variety of sizes and specifications, all 500mm in length to suit your exact requirementsTypical Applications Generally used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 109.95

1

Indexa 10MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

Manufactured from CW614N/CZ121 specification brass alloy, these hexagonal bars are ideal for making intricate and useful engineering components. This type of brass is the most widely used of all the brasses due to its suitability for high speed machining operations. Suited for hot formability as opposed to cold working, the product can be purchased in a range of diameters, all with a 500mm length.Features and Benefits Hexagonal shape helps you to reduce material wastage, saving you from milling the material down from a larger amount of brass The bars possess the highest machinability of any copper alloy Excellent hot formability for accurate results Good corrosion resistance for all around quality of performance and longevity Available in a variety of sizes and specifications, all 500mm in length to suit your exact requirementsTypical Applications Generally used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 10.99

1

5x Indexa 8MMx500MM Brass Hexagon BARCW614N/CZ121 (1 Pce)

Manufactured from CW614N/CZ121 specification brass alloy, these hexagonal bars are ideal for making intricate and useful engineering components. This type of brass is the most widely used of all the brasses due to its suitability for high speed machining operations. Suited for hot formability as opposed to cold working, the product can be purchased in a range of diameters, all with a 500mm length.Features and Benefits Hexagonal shape helps you to reduce material wastage, saving you from milling the material down from a larger amount of brass The bars possess the highest machinability of any copper alloy Excellent hot formability for accurate results Good corrosion resistance for all around quality of performance and longevity Available in a variety of sizes and specifications, all 500mm in length to suit your exact requirementsTypical Applications Generally used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 49.95

1

5x Indexa 22MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

Manufactured from CW614N/CZ121 specification brass alloy, these hexagonal bars are ideal for making intricate and useful engineering components. This type of brass is the most widely used of all the brasses due to its suitability for high speed machining operations. Suited for hot formability as opposed to cold working, the product can be purchased in a range of diameters, all with a 500mm length.Features and Benefits Hexagonal shape helps you to reduce material wastage, saving you from milling the material down from a larger amount of brass The bars possess the highest machinability of any copper alloy Excellent hot formability for accurate results Good corrosion resistance for all around quality of performance and longevity Available in a variety of sizes and specifications, all 500mm in length to suit your exact requirementsTypical Applications Generally used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 149.95

1

5x Indexa 15MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

Manufactured from CW614N/CZ121 specification brass alloy, these hexagonal bars are ideal for making intricate and useful engineering components. This type of brass is the most widely used of all the brasses due to its suitability for high speed machining operations. Suited for hot formability as opposed to cold working, the product can be purchased in a range of diameters, all with a 500mm length.Features and Benefits Hexagonal shape helps you to reduce material wastage, saving you from milling the material down from a larger amount of brass The bars possess the highest machinability of any copper alloy Excellent hot formability for accurate results Good corrosion resistance for all around quality of performance and longevity Available in a variety of sizes and specifications, all 500mm in length to suit your exact requirementsTypical Applications Generally used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 84.95

1

5x Indexa 20MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

Manufactured from CW614N/CZ121 specification brass alloy, these hexagonal bars are ideal for making intricate and useful engineering components. This type of brass is the most widely used of all the brasses due to its suitability for high speed machining operations. Suited for hot formability as opposed to cold working, the product can be purchased in a range of diameters, all with a 500mm length.Features and Benefits Hexagonal shape helps you to reduce material wastage, saving you from milling the material down from a larger amount of brass The bars possess the highest machinability of any copper alloy Excellent hot formability for accurate results Good corrosion resistance for all around quality of performance and longevity Available in a variety of sizes and specifications, all 500mm in length to suit your exact requirementsTypical Applications Generally used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 149.95

1

5x Indexa 3/4" x 3/4" x 1/8" x 24" Brass Equal Angle CW614N/CZ121 (1 Piece)

Manufactured from a brass alloy CZ121 / CW614N, this equal angle is used for machining. It has lead added to the composition to improve machinability. The lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. Each equal angle of brass is 24in. in length and varies in width to suit your requirements. Suited for making intricate parts.Features and Benefits The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts Available in a range of sizes and specifications to suit your needs, all 24in. in length Can be used for a wide variety of industrial applications and to form intricate components Supplied as an equal angle shaped section of brass Product is not suited for use when cold The highest machinability of any copper alloy, excellent hot formability and good corrosion resistanceTypical Applications Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 71.45

1

Brand

Merchant

Price (EUR)

1/2in x 1/2in x 1/8in x 24in Brass Bar Equal Angle CW614N/CZ121 - 5 Pieces

4x 1/2in x 24in Brass Bar Square CW614N/CZ121 - 5 Piece

Indexa 1in x 1in x 1/8in x 24in Brass Bar Equal Angle CW614N/CZ121 - 5 Pieces

Indexa 3/4in x 3/4in x 1/8in x 24in Brass Bar Equal Angle CW614N/CZ121 - 5 Pieces

Indexa 25mm x 500mm Brass Round Bar CW614N/CZ121- 1 Piece

Indexa 1in x 24in Brass Hexagon Bar CW614N/CZ121 -1 Piece

Indexa 15mm x 500mm Brass Hexagon Bar CW614N/CZ121 - 5 Piece

Indexa 1in x 24in Brass Bar Square CW614N/CZ121 - 1 Piece

Indexa 1/2in x 1/4in x 24in Brass Bar Flat CW614N/CZ121 - 4 Pieces

Indexa 2in x 2in x 1/8in x 24in Brass Bar Equal Angle CW614N/CZ121 - 1 Piece

Indexa 3/4in x 1/4in x 24in Brass Bar Flat CW614N/CZ121 - 4 Pieces

Indexa 1in x 24in Brass Round Bar CW614N/CZ121 - 1 Pieces

9x Indexa 600mm x 300mm x 0.70mm Brass Sheet CW508L/CZ108HH -1PCS

Indexa 600mm x 300mm x 1.6mm Brass Sheet CW508L/CZ108HH - 1 Piece

Indexa 10MMx500MM Brass Round BARCW614N/CZ121 (1 Pce)

Indexa 8MMx500MM Brass Round BARCW614N/CZ121 (1 Pce)

Indexa 6MMx500MM Brass Hexagon BARCW614N/CZ121 (1 Pce)

Indexa 12MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

5x Indexa 18MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

Indexa 10MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

5x Indexa 8MMx500MM Brass Hexagon BARCW614N/CZ121 (1 Pce)

5x Indexa 22MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

5x Indexa 15MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

5x Indexa 20MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

5x Indexa 3/4" x 3/4" x 1/8" x 24" Brass Equal Angle CW614N/CZ121 (1 Piece)

Powered by Cobiro