Pricemate

Huntingdon Fusion Techniques Purgenet Dew Point Purging Gas Moisture Sensor DPS1000

The HFT PurgeNet Dew Point Purging Gas Moisture Sensor revolutionises the measurement of the dew point for critical welds, making it incredibly easy. With its seamless integration capability into any of Huntingdon Fusion's high spec PurgEye Weld Purge Monitors, the HFT PurgeNet Dew Point Purging Gas Moisture Sensor eliminates the need for Companies involved in critical joint welding to invest in a separate and costly Dew Point Meter, offering accurate readings down to 1 ppm (with a precision of 10 ppm) . Dew Point Purging Gas Moisture Sensor is suitable for the following types of gases: Argon (Ar) Oxygen (O2) Nitrogen (N2) Hydrogen (H2) Carbon Dioxide (CO2) Features Integration Compatibility: It is designed to seamlessly integrate with high spec PurgEye Weld Purge Monitors, providing a comprehensive solution for measuring both dew point and weld purge parameters. Dew Point Measurement: The sensor is specifically designed for accurate measurement of the dew point, enabling precise assessment of moisture levels in the purging gas during critical welds. Wide Reading Range: It can measure dew points down to 1 ppm, ensuring high sensitivity and enabling precise control of moisture levels. The accuracy of the measurements is rated at 10 ppm. Cost Savings: By eliminating the need to purchase a separate and expensive dew point meter, the HFT PurgeNet Dew Point Purging Gas Moisture Sensor helps companies reduce costs and streamline their welding processes. User-Friendly: The sensor is designed to be user-friendly and easy to operate, simplifying the measurement process for welders and technicians. Reliability: It is built to deliver reliable and consistent results, ensuring that critical welds are performed under optimal conditions with controlled moisture levels. Durability: The sensor is constructed with durable materials to withstand the harsh environments typically encountered during welding operations, ensuring its longevity and performance. Compatibility PurgEye 200 PurgEye 500 Desk PurgEye 600 PurgEye 1000 Remote PurgEye 1500 Site FAQs 1. What is Dew? Dew is expressed as drops of liquid water that condense from the atmosphere and onto any solid surface like metal. 2. What is the Dew Point? The dew point is the temperature in C or F at which air is saturated with water vapour (also referred to as humidity) Below the dew point, water will begin to condense on solid surfaces in the welding environment. 3. How does water moisture affect the quality of the weld joint? Under arc conditions, water is broken down into hydrogen and oxygen in atomic form which, when present in weld metal, cause porosity and are known to create cracking in the weld joint. 4. Why should I use a Dew Point Purging Gas Moisture Sensor? Using the PurgeNet Dew Point Purging Gas Moisture Sensor while welding is the easiest method for indicating when water will condense on solid surfaces in the welding zone. Water can form as moisture on metal surfaces while welding and it is important to be able to measure Dew Point while welding lengthy critical joints as conditions can change during the welding process. 5. How does the Dew Point Purging Gas Moisture Sensor give readings? The PurgEye Dew Point Sensor accessory has been designed to integrate with most of the Argweld Weld Purge Monitors via the PurgeNet lead that is supplied with them, thereby giving values and water present on the same screen. In this way, the user is not forced into the purchase of an expensive, separate Dew Point Monitor that will give its reading elsewhere. 6. Which Weld Purge Monitors are compatible with the Dew Point Purging Gas Moisture Sensor? The PurgeNet Dew Point Purging Gas Moisture Sensor is compatible with the PurgEye 200, 500 Desk, 600, 1000 Remote and 1500 Site.

GBP 4299.99

1

Huntingdon Fusion Techniques Huntingon Fusion PurgEye 200 IP65 Hand Held Weld Purge Monitor with PurgeNet

Introducing the groundbreaking Huntingdon Fusion PurgEye 200 Weld Purge Monitor equipped with the revolutionary PurgeNet technology! This portable and rechargeable Oxygen Monitor is the world's first and only device of its kind, capable of accurately measuring oxygen levels from 1, 000 ppm (0.1%) down to an impressive 1 ppm (0.0001%) with a remarkable accuracy of 10 ppm. Huntingdon Fusion's latest innovation in Weld Purge Monitoring Technology, the PurgEye 200, brings forth numerous advancements that set it apart from the rest. Features Internal electro-mechanical pump with 1 l/m flow rate. USB lead included to control PurgeLog software. IP65 rated Long life, faster response sensor Internal rechargeable battery or mains power operated. Battery life up to 10 hours. Hand held easy to use instrument. Warning alarm levels between 1 and 999 ppm. Flow detection for accurate reading of gas samples. Outstanding protection against HF interference. Large character OLED screen for easy reading. Power on/off with standby button for sensor warm up. Can be charged by plugging directly into mains power with charging lead or optional charging dock. What's In The Box PurgEye 200 Storage case 150 mm long red tube to attach to red purge exhaust 1 metre long green tube with inlet filter Charging unit for internal battery with mains plug adaptors for all countries PurgeNet Smart Cable for transferring Weld Purge Data PurgeLog Data Logging Software (USB Data Stick) User instruction booklet Calibration Certificate (valid for 12 months) FAQs 1. What is the intended application for the Argweld PurgEye 200 IP65 Weld Purge Monitor? For extreme weld quality control in aerospace, semiconductor, pharmaceutical, vacuum, biotech, food and drinks industries where pristine oxide free welds have to be achieved. Also, applications demanding extremely accurate readings from atmosphere right down to 10 parts per million (ppm) , such as welds made in titanium, duplex, nickel alloys and high specification stainless steels. 2. Does the Argweld PurgEye 200 IP65 have a pump? Yes, there is an integral electro-mechanical pump. 3. What sort of sensor is used in the Argweld PurgEye 200 IP65? The PurgEye 200 IP65 uses a solid state long life sensor of a unique design. It is much lower in cost than other sensors, that are used for measuring down to 10 ppm. 4. My Company needs a calibration certificate once a year for all instruments. How do I obtain one? At present, Huntingdon Fusion have calibration facilities in the UK, USA, Singapore and Norway. As time goes by they are planning to set up others. Once your instrument has been sent, they will recalibrate it and return it with a certificate within a few days. 5. Is the Argweld PurgEye 200 IP65 Weld Purge Monitor sensitive to electrical high frequency disturbances? Each instrument has shielding to prevent most forms of interference. Quality control test and inspection criteria are designed to account for as many variables as possible. 6. I need to detect oxygen level in pipes preheated to 300 ?C (572 ?F) Can I use the Argweld PurgEye 200 under these conditions? The Argweld PurgEye Weld Purge Monitors should not be exposed to gas at a temperature above 50 ?C (122 ?F) . 7. What is PurgeNetTM? PurgeNetTM controls the welding power sources such as orbital welders and any other automatic welding systems to switch on and off according to oxygen levels, transferring data easily with the ability to link to external devices. 8. Can Weld Purge Monitors only be used when purging with argon? The PurgEye Weld Purge Monitors measure the oxygen level within any gas, not only inert gases. They can be used to monitor the oxygen level when using inert gases such as argon and helium> and also non-inert gases including nitrogen and nitrogen/hydrogen mixes.

GBP 3399.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 254mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 569.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1041mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1539.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 406mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 699.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 381mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 649.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1245mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1699.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 635mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1049.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 965mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1399.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 914mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1399.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 432mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 729.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1473mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1999.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1321mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1999.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 711mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1199.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 279mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 599.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1143mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1699.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 203mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 499.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1499mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1999.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 686mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1099.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1092mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1599.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 762mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1199.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1118mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1699.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 813mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1239.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1067mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1599.99

1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 889mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1299.99

1

Brand

Size

Merchant

Price (EUR)

Huntingdon Fusion Techniques Purgenet Dew Point Purging Gas Moisture Sensor DPS1000

Huntingdon Fusion Techniques Huntingon Fusion PurgEye 200 IP65 Hand Held Weld Purge Monitor with PurgeNet

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 254mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1041mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 406mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 381mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1245mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 635mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 965mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 914mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 432mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1473mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1321mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 711mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 279mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1143mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 203mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1499mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 686mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1092mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 762mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1118mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 813mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 1067mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 889mm

Powered by Cobiro