Pricemate

Haes WRA-RC-I00 WMSS EN54-23 W-Cat Red Flash Red Body Strobe

Haes WRA-RC-I00 WMSS EN54-23 W-Cat Red Flash Red Body StrobeW Class wall mount approved - this strobe would fit yourneed perfectly coming with red and white body colour options and white or redflash colour to suit your environment.Approved to EN54-23 EN54-17 it enables a completefully compliant and cost-effective fire alarm system by reducing installation andcommissioning costs through fewer wiring points.This solution enables easy system extensions in legacy andnew projects thereby providing the highest level of protection for allbuilding occupants from a trusted brand.Key FeaturesRed flashRed body

GBP 166.76

1

Haes WRL-RC-I00 WMST EN54-23 W-Cat Red Flash Red Body Strobe

Haes WRL-RC-I00 WMST EN54-23 W-Cat Red Flash Red Body StrobeW Class wall mount approved - this strobe would fit yourneed perfectly coming with red and white body colour options and white or redflash colour to suit your environment.Approved to EN54-23 EN54-17 it enables a completefully compliant and cost-effective fire alarm system by reducing installation andcommissioning costs through fewer wiring points.This solution enables easy system extensions in legacy andnew projects thereby providing the highest level of protection for allbuilding occupants from a trusted brand.Key FeaturesRed flashRed body

GBP 117.55

1

Haes ESG-2001 Esprit Graphic Display Remote Status Unit

Haes ESG-2001 Esprit Graphic Display Remote Status UnitThe Haes ESG-2001 remote display unit has the same large graphic display as the control panel with a manual release button and an automanual key switch.It uses RS485 comms connections and up to 16 units can be connected on a system. If using the dual flood area control panel each remote status unit can be assigned to the specific flood area.Key FeaturesLarge graphical displayManual release buttonAutoManual key switchRobust metal enclosure

GBP 240.38

1

Haes ESG-2002 Esprit Mini Remote Status Unit

Haes ESG-2002 Esprit Mini Remote Status UnitThe Haes ESG-2002 mini status indicator provides LED only indication for automanual and release imminent with an automanual key switch. It is mounted in a compact single gang ABS enclosure.The Espirit Mini Remote Status Unit uses RS485 comms connections and up to 16 units can be connected on a system. If using the dual flood area control panel each remote status unit can be assigned to the specific flood area.Key FeaturesMounted in a compact single gang ABS enclosureRS485 comms connectionsCan connect up to 16 units

GBP 60.00

1

Haes LCD Fully Functional Remote Display Unit XL-RDU

Haes LCD Fully Functional Remote Display Unit XL-RDUThe XL-RDU 32 way LCD remote display repeater panels have the same easy to use controls and indications as the main control panels with the addition of a 4 line x 40 character backlit LCD display. The remote display units are fully functional with Silence Resound and Reset controls as well as Disable and Test Mode functions. It is also possible to disable the controls for each or all repeater panels to make them passive indication only. Up to 8 repeater panels can be supported on a system.The display text is fully editable for system panel and zone names plus up to 40 characters for installationservice company details. Other local options include setting the real time clock editing the user access code and lowering or muting the internal buzzer. All programming can be done using the on board controls and user menu or via the PC config software supplied. The main circuit board has 2 switch ve outputs which provide fire and fault signals. Inputs are available for use as PSU fault inputs. An input for a remote key-switch is also provided.Controls are enabled via a 4 digit code entry. The user code can be changed in the programming settings. An eight button keypad is used to control the system and allow access to the function options. The remote display unit is housed in a robust sheet steel enclosure suitable for wall mounting. Cable entry is via 20mm knockouts located at the top and rear of the cabinet. A nominal 28v dc supply is required to power the remote display units which can be obtained from the control panel or remote power supply unit.Key Features4 x 40 character backlit LCD displaySimple colour coded buttons for controlsProgrammable display textRemote key switch inputFull system controlTest mode disablement functionsFully functional or passiveUp to 8 units supported on a systemPC programming software

GBP 499.37

1

Haes HS-5010 Remote Display Terminal with Standard Network Interface

Haes HS-5010 Remote Display Terminal with Standard Network InterfaceThe HS-5010 is a Remote Display Terminal RDT while the HS-5020 is a fully functional Remote Control Terminal RCT. The remote terminals utilise the same graphical LCD user interface that can be found on the HS-5000 series fire panels and are based upon the same advanced flash based microprocessor technology. All HS-5000 series panels and remote terminals can communicate over the same 2-core network cable.Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enable disable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesDisplay only or full control unitsStandard network or fault tolerant versions3 year warranty as standardLarge graphical LCD user interfaceSmall compactProgrammable switch inputsDisableenable optionsFully on site programmable

GBP 657.64

1

Haes HS-5020 Remote Control Terminal with Standard Network Interface

Haes HS-5020 Remote Control Terminal with Standard Network InterfaceThe HS-5010 is a Remote Display Terminal RDT while the HS-5020 is a fully functional Remote Control Terminal RCT. The remote terminals utilise the same graphical LCD user interface that can be found on the HS-5000 series fire panels and are based upon the same advanced flash based microprocessor technology. All HS-5000 series panels and remote terminals can communicate over the same 2-core network cable.Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enable disable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesDisplay only or full control unitsStandard network or fault tolerant versions3 year warranty as standardLarge graphical LCD user interfaceSmall compactProgrammable switch inputsDisableenable optionsFully on site programmable

GBP 812.36

1

Haes HS-5020-FT Remote Control Terminal with Fault Tolerant Network

Haes HS-5020-FT Remote Control Terminal with Fault Tolerant NetworkThe HS-5010 is a Remote Display Terminal RDT while the HS-5020 is a fully functional Remote Control Terminal RCT. The remote terminals utilise the same graphical LCD user interface that can be found on the HS-5000 series fire panels and are based upon the same advanced flash based microprocessor technology. All HS-5000 series panels and remote terminals can communicate over the same 2-core network cable.Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enable disable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesDisplay only or full control unitsStandard network or fault tolerant versions3 year warranty as standardLarge graphical LCD user interfaceSmall compactProgrammable switch inputsDisableenable optionsFully on site programmable

GBP 1339.04

1

Haes Comms Card for Repeater amp Network Connections TPCA05

Haes Comms Card for Repeater Network Connections TPCA05The Haes comms card TPCA05 allows up to eight XLEN or XL32 control panels to be networked. Any combination of panel can be used from a 2 zone to a 32 zone and in any order to provide up to 256 conventional or Twin Wire zones. The card simply plugs in on top of the main circuit board in the control panel. In addition to the eight control panels up to eight repeater panels or remote display units can also be added to the network. The remote display units are supplied with a 4 x 40 character backlit LCD and will display all system fires and faults as well as controlling Silence Reset and other functions for the entire network.The networking has been designed to be wired in a fault tolerant fail safe loop configuration from comms A to B and back to the main panel again. If replacing an older system where the existing cabling cannot be configured in a loop as above it is possible to re-programme the master panel back to legacy RS485 circuit comms monitoring. This then allows any topology of comms cabling to be utilised. The cards are also provided with six programmable switch negative outputs which can be utilised for any local switching requirements.

GBP 126.86

1

Haes HS-5010-FT Remote Display Terminal with Fault Tolerant Network

Haes HS-5010-FT Remote Display Terminal with Fault Tolerant NetworkThe HS-5010 is a Remote Display Terminal RDT while the HS-5020 is a fully functional Remote Control Terminal RCT. The remote terminals utilise the same graphical LCD user interface that can be found on the HS-5000 series fire panels and are based upon the same advanced flash based microprocessor technology. All HS-5000 series panels and remote terminals can communicate over the same 2-core network cable.Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enable disable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesDisplay only or full control unitsStandard network or fault tolerant versions3 year warranty as standardLarge graphical LCD user interfaceSmall compactProgrammable switch inputsDisableenable optionsFully on site programmable

GBP 1190.28

1

Haes PSU-1003 5A EN54 Power Supply Takes 2 x 18Ah Batteries

Haes PSU-1003 5A EN54 Power Supply Takes 2 x 18Ah BatteriesThe Haes 5A EN54 Power Supply Unit has been developed toprovide a simple to use robust solution for fire alarm applications wheremandatory EN54 part 4 approval is required.This includes applications where detection devices are notpowered directly from the fire alarm control equipment for example BeamDetectors Aspirating Detectors and Flame Detectors. Other applications wouldbe powering Sounder Circuit Controllers and Expanders Control Panel RepeatersRemote Communicators or any other Fire Alarm System critical power supplyapplications.As standard the PSU comes with dual supply outputs afailsafe fault relay output and Supply Healthy and Fault Condition LED indicators.Key FeaturesRequires 2 x 18Ah batteriesRobust metal enclosure

GBP 391.78

1

Haes PSU-1002 3A EN54 Power Supply Takes 2 x 7Ah Batteries

Haes PSU-1002 3A EN54 Power Supply Takes 2 x 7Ah BatteriesThe Haes 3A EN54 Power Supply Unit has been developed toprovide a simple to use robust solution for fire alarm applications wheremandatory EN54 part 4 approval is required.This includes applications where detection devices are notpowered directly from the fire alarm control equipment for example BeamDetectors Aspirating Detectors and Flame Detectors. Other applications wouldbe powering Sounder Circuit Controllers and Expanders Control Panel RepeatersRemote Communicators or any other Fire Alarm System critical power supplyapplications.As standard the PSU comes with dual supply outputs afailsafe fault relay output and Supply Healthy and Fault Condition LED indicators.Key FeaturesRequires 2x 7Ah batteriesRobust metal enclosure

GBP 223.97

1

Haes PSU-1001 1.5A EN54 Power Supply Takes 2x 7Ah Batteries

Haes PSU-1001 1.5A EN54 Power Supply Takes 2x 7Ah BatteriesThe Haes 1.5A EN54 Power Supply Unit has been developed toprovide a simple to use robust solution for fire alarm applications wheremandatory EN54 part 4 approval is required.This includes applications where detection devices are notpowered directly from the fire alarm control equipment for example BeamDetectors Aspirating Detectors and Flame Detectors. Other applications wouldbe powering Sounder Circuit Controllers and Expanders Control Panel RepeatersRemote Communicators or any other Fire Alarm System critical power supplyapplications.As standard the PSU comes with dual supply outputs afailsafe fault relay output and Supply Healthy and Fault Condition LED indicators.Key FeaturesRequires 2x 7Ah batteriesRobust metal enclosure

GBP 194.16

1

Haes AlarmSense 2 Zone Control Panel ALS-2

Haes AlarmSense 2 Zone Control Panel ALS-2Quality reliability ease of use and feature rich are attributes that are consistent across the entire range of Haes fire alarm control panels. The AlarmSense encompasses all of these attributes to provide a panel that meets a variety of needs. For the fire alarm engineer the AlarmSense has been designed to minimise labour costs. There is ample room for wiring changing batteries and clear indication. Activation is via key switch or access code which means you should always be able to work on the panel and the one man walk tests will help reduce the cost of maintaining the fire alarm system. Simplicity was one of the most important aspects when considering the end user of a fire alarm panel.The colour coded buttons and the 3 step silence functionality gives non-technical people the confidence to correctly manage their fire alarm system. Two or four AlarmSense fire zone circuits are provided plus two additional conventional monitored sounder circuits. Fire Fault VFCO relays Fire Fault switched negative outputs class change and an alert input are also included. Haes AlarmSense panels are approved to European standards EN54-2 4 Fire Detection and Alarm Systems Control Indicating Equipment.Key Features2 or 4 AlarmSense zonesApproved to EN54-2 4Smart design easy to install commission maintainFalse alarm reduction with non priority signallingLocal general alarm switchingClass change pulsing inputsIdeal for HMOsFire fault relaysOne man walk testKey-switch or code entry for activation of controlsFault diagnostics mode

GBP 200.12

1

Haes AlarmSense 4 Zone Control Panel ALS-4

Haes AlarmSense 4 Zone Control Panel ALS-4Quality reliability ease of use and feature rich are attributes that are consistent across the entire range of Haes fire alarm control panels. The AlarmSense encompasses all of these attributes to provide a panel that meets a variety of needs. For the fire alarm engineer the AlarmSense has been designed to minimise labour costs. There is ample room for wiring changing batteries and clear indication. Activation is via key switch or access code which means you should always be able to work on the panel and the one man walk tests will help reduce the cost of maintaining the fire alarm system. Simplicity was one of the most important aspects when considering the end user of a fire alarm panel.The colour coded buttons and the 3 step silence functionality gives non-technical people the confidence to correctly manage their fire alarm system. Two or four AlarmSense fire zone circuits are provided plus two additional conventional monitored sounder circuits. Fire Fault VFCO relays Fire Fault switched negative outputs class change and an alert input are also included. Haes AlarmSense panels are approved to European standards EN54-2 4 Fire Detection and Alarm Systems Control Indicating Equipment.Key Features2 or 4 AlarmSense zonesApproved to EN54-2 4Smart design easy to install commission maintainFalse alarm reduction with non priority signallingLocal general alarm switchingClass change pulsing inputsIdeal for HMOsFire fault relaysOne man walk testKey-switch or code entry for activation of controlsFault diagnostics mode

GBP 223.67

1

Haes 24vdc 2.5amp Transformer Rectifier Power Supply TRX2.5A-24

Haes 24vdc 2.5amp Transformer Rectifier Power Supply TRX2.5A-24The Haes 1A and 2.5A TRX transformer rectifier power supplies are suitable for applications requiring a simple regulated 24vdc supply where the charging of standby batteries is not required. Typical applications include door retaining magnets electromagnetic door closers or analogue system interface modules. The power supply units come complete with an integral load switching relay and are enclosed in a mild steel cabinet with a Supply On LED indicator and 20mm knockouts for cable entry.Key FeaturesHigh efficiency switched mode power suppliesCompact 1A and 2.5A versionsRegulated 24vdc supply3 year warranty as standardIntegral load switching relaySupply on indicationContinuously rated at design load see overMains input range 88-264vacOverload protected

GBP 74.25

1

Haes 24vdc 1amp Transformer Rectifier Power Supply TRX1A-24

Haes 24vdc 1amp Transformer Rectifier Power Supply TRX1A-24The Haes 1A and 2.5A TRX transformer rectifier power supplies are suitable for applications requiring a simple regulated 24vdc supply where the charging of standby batteries is not required. Typical applications include door retaining magnets electromagnetic door closers or analogue system interface modules. The power supply units come complete with an integral load switching relay and are enclosed in a mild steel cabinet with a Supply On LED indicator and 20mm knockouts for cable entry.Key FeaturesHigh efficiency switched mode power suppliesCompact 1A and 2.5A versionsRegulated 24vdc supply3 year warranty as standardIntegral load switching relaySupply on indicationContinuously rated at design load see overMains input range 88-264vacOverload protected

GBP 78.14

1

Haes HS-5201 1-2 Loop Analogue Control Panel with 1 Loop

Haes HS-5201 1-2 Loop Analogue Control Panel with 1 LoopThe HS-5200 series of control panels are fully expandable from 1 - 2 loops and supplied with 2 on-board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple Select Click programming aid for engineer configuration and end-user operation.Powerful cause and effect programming coupled with DynamiX zoning and enhanced Trace Diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT configuration software. An extensive suite of user-friendly Windows based PC software programs have been developed to enhance your experience when using the Elan series of fire panels.The suite incorporates a number of different programmes to include a Configuration Service Logo and Virtual Panel Tool to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other Elan fire panel current range of Advanced Electronics fire panels Remote Terminal or Network Peripheral such as ipGateway or BMSGraphical Interface. The network operates as a true peer-to-peer system and can be configured in a fault-tolerant loop or radial format.Key FeaturesFully approved to EN54 part 2 4 13 and CE marked under the Construction Products Regulation CPRGlobal complianceOpen protocol system3 year warranty as standardLarge graphical LCD user interfacePowerful cause effects programmingTrue peer to peer networkingOn board printer option M enclosure only20 zonal LED indicatorsProgrammable push buttons

GBP 1373.53

1

Haes HS-5101 Single Loop Analogue Control Panel

Haes HS-5101 Single Loop Analogue Control PanelThe HS-5100 series of control panels are supplied with a single loop driver card 2 on-board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple Select Click programming aid for engineer configuration and end-user operation.Powerful cause and effect programming coupled with DynamiX zoning and enhanced Trace Diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The Panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT configuration software. An extensive suite of user-friendly Windows based PC software programs have been developed to enhance your experience when using the Elan series of fire panels.The suite incorporates a number of different programmes to include a Configuration Service Logo and Virtual Panel Tool to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other Elan fire panel current range of Advanced Electronics fire panels Remote Terminal or Network Peripheral such as ipGateway or BMSGraphical Interface. The network operates as a true peer-to-peer system and can be configured in a fault-tolerant loop or radial format.Key FeaturesFully approved to EN54 part 2 4 13 and CE marked under the Construction Products Regulation CPRGlobal complianceOpen protocol system3 year warranty as standardLarge graphical LCD user interfacePowerful cause effects programmingTrue peer to peer networkingOn board printer option M enclosure only20 zonal LED indicatorsProgrammable push buttons

GBP 1086.13

1

Haes HS-5802 2-8 Loop Analogue Control Panel with 2 Loops

Haes HS-5802 2-8 Loop Analogue Control Panel with 2 LoopsThe HS-5800 series of control panels are fully expandable from 2 to 8 loops and supplied with 8 on-board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 8 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple Select Click programming aid for engineer configuration and end-user operation.Powerful cause and effect programming coupled with DynamiX zoning and enhanced Trace Diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT configuration software. An extensive suite of user-friendly Windows based PC software programs have been developed to enhance your experience when using the Elan series of fire panels.The suite incorporates a number of different programmes to include a Configuration Service Logo and Virtual Panel Tool to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other Elan fire panel current range of Advanced Electronics fire panels Remote Terminal or Network Peripheral such as ipGateway or BMSGraphical Interface. The network operates as a true peer-to-peer system and can be configured in a fault-tolerant loop or radial format.Key FeaturesFully approved to EN54 part 2 4 13 and CE marked under the Construction Products Regulation CPRGlobal complianceOpen protocol system3 year warranty as standardLarge graphical LCD user interfacePowerful cause effects programmingTrue peer to peer networkingOn board printer option M enclosure only20 zonal LED indicatorsProgrammable push buttonsPlease Note To expand the loops on this panel youll need a HSP-502 Loop Driver Card.

GBP 4783.32

1

Haes HS-5802-FT 2-8 Loop Analogue Control Panel with 2 Loops amp Fault Tolerant Network

Haes HS-5802-FT 2-8 Loop Analogue Control Panel with 2 Loops Fault Tolerant NetworkThe HS-5800 series of control panels are fully expandable from 2 to 8 loops and supplied with 8 on-board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 8 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple Select Click programming aid for engineer configuration and end-user operation.Powerful cause and effect programming coupled with DynamiX zoning and enhanced Trace Diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT configuration software. An extensive suite of user-friendly Windows based PC software programs have been developed to enhance your experience when using the Elan series of fire panels.The suite incorporates a number of different programmes to include a Configuration Service Logo and Virtual Panel Tool to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other Elan fire panel current range of Advanced Electronics fire panels Remote Terminal or Network Peripheral such as ipGateway or BMSGraphical Interface. The network operates as a true peer-to-peer system and can be configured in a fault-tolerant loop or radial format.Key FeaturesFully approved to EN54 part 2 4 13 and CE marked under the Construction Products Regulation CPRGlobal complianceOpen protocol system3 year warranty as standardLarge graphical LCD user interfacePowerful cause effects programmingTrue peer to peer networkingOn board printer option M enclosure only20 zonal LED indicatorsProgrammable push buttonsPlease Note To expand the loops on this panel youll need a HSP-502 Loop Driver Card.

GBP 5271.74

1

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 7AH Batteries PSAS-30EN54

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 7AH Batteries PSAS-30EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 238.13

1

Haes 5.0amp 24vdc EN54 Battery Charger Power Supply Up To 38Ah Batteries PSAL-50EN54

Haes 5.0amp 24vdc EN54 Battery Charger Power Supply Up To 38Ah Batteries PSAL-50EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 402.96

1

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 18Ah Batteries PSAM-30EN54

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 18Ah Batteries PSAM-30EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 285.77

1

Haes 1.5amp 24vdc EN54 Battery Charger Power Supply Up To 7Ah Batteries PSAS-15EN54

Haes 1.5amp 24vdc EN54 Battery Charger Power Supply Up To 7Ah Batteries PSAS-15EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 201.35

1

Brand

Merchant

Price (EUR)