31 results (0,16918 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

HMT VersaDrive 90 DrillSink 8mm Drill Bit x 12.4mm Countersink (M6)

HMT VersaDrive 90 DrillSink 8mm Drill Bit x 12.4mm Countersink (M6)

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 61.99
1

HMT VersaDrive ImpactaTap M6 x 1.0mm

HMT VersaDrive ImpactaTap M6 x 1.0mm

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 34.99
1

HMT VersaDrive 90 Countersink 12.4mm (M6)

HMT VersaDrive 90 Countersink 12.4mm (M6)

The VersaDrive Countersink is a premium quality countersink with fully ground flutes and Titanium coating to help reduce wear and blunting. VersaDrive Countersinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. Utilise the convenience and power of an impact wrench to quickly debur and countersink holes up to 16.5mm with minimal torque kick-back against the operator.Features & Benefits- 90 Point Angle for Countersunk Bolt Heads- Safer use with minimal kickback- Specially hardened for impact wrench use up to 16.5mm- High-Grade Tool Steel for high accuracy & long life- GoldMax low friction Titanium Coating to stop burn out- High Strength, Non-slip shank design- 1st Impact rated countersinks on the market

GBP 45.99
1

HMT VersaDrive Spiral Flute ImpactaTap M6 x 1.00mm

HMT VersaDrive Spiral Flute ImpactaTap M6 x 1.00mm

VersaDrive Spiral Flute Taps are designed for tapping deep & blind holes and can be used with the VersaDrive Clutched collet or adapted for use in a reversible Magnet Drill, impact wrench or even used with any standard Hand Tap wrench.VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 50.99
1

HMT VersaDrive ImpactaTap M6 x 0.75 Metric Fine

HMT VersaDrive ImpactaTap M6 x 0.75 Metric Fine

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 41.99
1

HMT VersaDrive HSS-Cobalt Drill Bit 5.0mm (M6 Tap Size)

HMT VersaDrive HSS-Cobalt Drill Bit 5.0mm (M6 Tap Size)

VersaDrive Cobalt Drills are a premium grade 8% Cobalt drill bit with fully ground flutes, 135 Split point and Titanium coating for faster drilling & reduced wear. Suitable for heavy fabrication use, this Cobalt drill bit can also be used to drill stainless steel, mild steel, cast iron and a wide range of other structural materials.VersaDrive Drill Bits have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Fast drilling with minimal kickback- Dual hardened for impact wrench use up to 10mm- Precision Ground Flutes with easy chip clearance- 135 Split Point for easy starting and high accuracy- 8% Cobalt for long life and endurance- GoldMax low-friction titanium coating to stop burn out- High Strength, Non-Slip Shank DesignAdditional Information- Optimum life and performance when used with rotary pistol drills- Up to 10mm can be used on impact wrench & impact drivers for fast cutting performance- Suitable for harder materials such as stainless steel when used at reduced RPM- Use appropriate lubrication and correct RPM to achieve long tool life

GBP 18.99
1

HMT VersaDrive Spiral Flute Combi Drill-Tap M6 x 1.0mm

HMT VersaDrive Spiral Flute Combi Drill-Tap M6 x 1.0mm

VersaDrive Combi Drill Taps are a time saving solution for pilot drilling & tapping in one easy operation. The Titanium coating provides wear resistance and faster cutting performance.VersaDrive Sheet Metal Impacta-DrillTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Recommended for use with Impact Drivers for high drilling and tapping productivity.Features & Benefits- Ground flute twist drill creates the perfect tapping hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Drill & Tap in one easy operation

GBP 40.99
1

HMT HSS SilverMax Weldon Twist Drill 5mm (M6 Tap Size)

HMT HSS SilverMax Weldon Twist Drill 5mm (M6 Tap Size)

HSS-XE twist drill bits with integrated magnet Weldon shank for simple and accurate drilling in steel and fast tool changing. Removes the need for using a separate drill chuck in a magnet drill. Where drilling smaller holes or tapping size holes has been a long and time consuming job in the past, fitting the Silvermax Magnet Twist Drills into a magnet drill can suddenly make the job far quicker and safer than struggling with a pistol drill and jobber drills.Features & Benefits- Integrated Weldon shank- Simple & Accurate drilling in steel- No need for a tool chuck when using a magnet drill- Fast tool changing- Quicker and safer than struggling with a pistol drill- Fits 19.05mm arbors - use with any standard mag drill

GBP 19.99
1

HMT VersaDrive Combi Drill-Tap Set, M5, M6, M8, M10, M12

HMT VersaDrive Combi Drill-Tap Set, M5, M6, M8, M10, M12

VersaDrive Combi Drill Taps are a time saving solution for pilot drilling & tapping in one easy operation. The Titanium coating provides wear resistance and faster cutting performance. VersaDrive Sheet Metal Impacta-DrillTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. Recommended for use with Impact Drivers for high drilling and tapping productivity.

GBP 179.99
1

HMT VersaDrive ImpactaTap 5 Pc Set: M6, M8, M10, M12, M16

HMT VersaDrive ImpactaTap 5 Pc Set: M6, M8, M10, M12, M16

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits- Ground Flutes create the perfect tapped hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Wide range of sizes

GBP 219.99
1

8x HMT Versadrive HD Impact Drill & Stud Extractor Set - M6-M20 - 8 Piece

8x HMT Versadrive HD Impact Drill & Stud Extractor Set - M6-M20 - 8 Piece

Combination bolt extraction set featuring VersaDrive ImpactaBite Left Hand Drill Bits and VersaDrive ImpactaBite Bolt Extractors. For removal of M5 - M20 bolts Left-hand drill bits pilot drill the broken or seized bolt to allow the bolt extractors to be hammered into the pilot hole before being impacted out. Contains: 4 x VersaDrive ImpactaBite Left Hand Pilot Drill Bits #3, #4, #5, #6 4 x VersaDrive ImpactaBite Bolt Extractors #3, #4, #5, #6

GBP 1679.92
1

HMT VersaDrive ImpactaTap InsertFoam Set M6, M8, M10, M12, M16, M20, M24 - 7 Piece

HMT VersaDrive ImpactaTap InsertFoam Set M6, M8, M10, M12, M16, M20, M24 - 7 Piece

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by Impact Wrenches and Impact Drivers, providing at least 15x faster performance than tapping by hand. With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or Pistol Drills (up to 3/8") or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.

GBP 439.99
1

HMT VersaDrive Oversize Galv ImpactaTap 6 Pc Set: M5, M6, M8, M10, M12, M16

HMT VersaDrive Oversize Galv ImpactaTap 6 Pc Set: M5, M6, M8, M10, M12, M16

VersaDrive ImpactaTaps for Galvanised Bolts have an oversized thread to compensate for the increased thickness of coating found on galvanised steel fabrications or galvanised fixings. VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits

GBP 309.99
1

HMT VersaDrive ImpactaDie Kit Complete Including Adapter/Collar + M6, M8, M10, M12 Guides and Hex Die Nuts

HMT VersaDrive ImpactaDie Kit Complete Including Adapter/Collar + M6, M8, M10, M12 Guides and Hex Die Nuts

Create external threads quickly and easily with this unique patent-pending impact die system. Ideal for both creating/extending new threads, repairing existing damaged/deformed threads or cleaning old threads clogged with surface coatings, rust or other unwanted material that can prevent threads mating and turning properly. The guide collar system ensures that the thread cutting process runs straight and true. Once a thread is established, the flush type collar can be used. Patent Pending GB 2319619.9

GBP 309.99
1

HMT Versadrive Stakit Installation Kit - 31pc - Metric Sizes

HMT Versadrive Stakit Installation Kit - 31pc - Metric Sizes

The STAKIT Site Installation Kit combines an essential set of best-selling VersaDrive products to overcome all common site installation and steel erection holemaking challenges. Keeps the job moving when you find an unexpected challenge. Presented in the STAKIT Mid Case and connects to all Top cases and Base cases. Metric Kit Contents - 6 x TurboTips 6, 6.35, 8, 10.5, 12, 14mm - 5 x HoleCutters 14, 17, 18, 20 & 22mm 2 x ImpactaStep 16 & 22mm - 3 x DrillTaps M6, M8 & M10 - 3 x ImpactaTaps M12, M16 & M20 - 4 x Reamers 12, 14, 18 & 22mm - 1/4" Impact Driver Adapter - 1/2" Impact Wrench Adapter - Magnet Drill Adapter - 130mm Extension - 300mm Extension

GBP 1199.99
1

HMT VersaDrive 90 DrillSink 11 Drill x 20.5mm (M10)

HMT VersaDrive 90 DrillSink 11 Drill x 20.5mm (M10)

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 89.99
1

HMT VersaDrive 90 DrillSink 13 Drill x 25mm (M12)

HMT VersaDrive 90 DrillSink 13 Drill x 25mm (M12)

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 99.99
1

HMT VersaDrive 90 DrillSink 10.2 Drill x 25mm (M12 Tap)

HMT VersaDrive 90 DrillSink 10.2 Drill x 25mm (M12 Tap)

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation.This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found with standard countersinks.VersaDrive DrillSinks have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Suits M6 set screws (DIN 74)- Drill & Countersink in one easy operation- Perfect concentricity creates the perfect Countersink- Ground flutes for high accuracy and long life- High-Grade tool steel- High strength, non-slip shank design- GoldMax low-friction titanium coating to stop burn-out- Prevents the chattering of standard countersinks

GBP 99.99
1