88 results (0,21083 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Forgefix TechFast Window Screw Pan Head TORX Compatible 4.3 x 25mm Box 1000 FOR196662

Forgefix TechFast Window Screw Pan Head TORX Compatible 4.3 x 25mm Box 1000 FOR196662

These ForgeFix TechFast Window Screws are suitable for window/door frame construction and hardware fixing in PVCu. They have a pan head with TORX compatible recess and feature a self-piercing sharp point. The screws are fire resistant and are protected by 'Elementech' corrosion resistant coating, which has been salt spray tested to 1000 hours. They comply with EU safety, health and environmental requirements. TX15 TORX compatible impact bit included. Size 4.3 x 25mm Bit Supplied TX15 Pack Box of 1000

GBP 19.99
1

Forgefix Dog Tooth Washer ZP 50 x 12mm Box 100 FORDTW50

Forgefix Dog Tooth Washer ZP 50 x 12mm Box 100 FORDTW50

Forgefix Dog Tooth Washers are mainly used with Carriage Bolts, where timber to timber connections are required. The teeth bite in to the timber, offering a no movement fastening. The washers are Zinc Plated for increased corrosion resistance. APPLICATION Used in many joints where restricted movement is required such as Roofing Joists, Newall posts on decking etc. Can be used with many types of bolts and fasteners, in particular Carriage Bolts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate&rsquos surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. Dog Tooth Washer ZP 50 x 12mm Box 100

GBP 35.99
1

Forgefix ForgeFast TORX Compatible Elite Performance Wood Screw ZY 6.0 x 240MM Box 100

Forgefix ForgeFast TORX Compatible Elite Performance Wood Screw ZY 6.0 x 240MM Box 100

ForgeFix ForgeFast Wood Screws have a universally accepted, Torx compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx compatible bit.

GBP 41.99
1

Forgefix ForgeFast TORX Compatible Elite Performance Wood Screw ZY 6.0 x 150mm Box 100 FORFFT6150Y

Forgefix ForgeFast TORX Compatible Elite Performance Wood Screw ZY 6.0 x 150mm Box 100 FORFFT6150Y

ForgeFix ForgeFast Wood Screws have a universally accepted, Torx compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx compatible bit.

GBP 18.99
1

Forgefix ForgeFast TORX Compatible Elite Performance Wood Screw ZY 6.0 x 130mm Box 100 FORFFT6130Y

Forgefix ForgeFast TORX Compatible Elite Performance Wood Screw ZY 6.0 x 130mm Box 100 FORFFT6130Y

ForgeFix ForgeFast Wood Screws have a universally accepted, Torx compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx compatible bit.

GBP 18.39
1

Forgefix ForgeFast TORX Compatible Elite Performance Wood Screw ZY 6.0 x 200mm Box 100 FORFFT6200Y

Forgefix ForgeFast TORX Compatible Elite Performance Wood Screw ZY 6.0 x 200mm Box 100 FORFFT6200Y

ForgeFix ForgeFast Wood Screws have a universally accepted, Torx compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx compatible bit.

GBP 36.99
1

Forgefix ForgeFast TORX Compatible Elite Performance Wood Screw ZY 6.0 x 180mm Box 100 FORFFT6180Y

Forgefix ForgeFast TORX Compatible Elite Performance Wood Screw ZY 6.0 x 180mm Box 100 FORFFT6180Y

ForgeFix ForgeFast Wood Screws have a universally accepted, Torx compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx compatible bit.

GBP 31.99
1

Forgefix Drywall Collated Screw Phillips Bugle Head SCT 3.9 X 50MM Box 1000

Forgefix Drywall Collated Screw Phillips Bugle Head SCT 3.9 X 50MM Box 1000

These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.

GBP 20.99
1

Forgefix Drywall Collated Screw Phillips Bugle Head SCT 4.2 X 75MM Box 1000

Forgefix Drywall Collated Screw Phillips Bugle Head SCT 4.2 X 75MM Box 1000

These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.

GBP 39.99
1

Forgefix Drywall Collated Screw Phillips Bugle Head SCT 3.9 x 45mm Box 1000 FORDWS45BPC

Forgefix Drywall Collated Screw Phillips Bugle Head SCT 3.9 x 45mm Box 1000 FORDWS45BPC

These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.

GBP 19.99
1

Forgefix Drywall Collated Screw Phillips Bugle Head SCT 3.9 x 38mm Box 1000 FORDWS38BPC

Forgefix Drywall Collated Screw Phillips Bugle Head SCT 3.9 x 38mm Box 1000 FORDWS38BPC

These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.

GBP 17.99
1

Forgefix Drywall Collated Screw Phillips Bugle Head SCT 3.9 x 55mm Box 1000 FORDWS55BPC

Forgefix Drywall Collated Screw Phillips Bugle Head SCT 3.9 x 55mm Box 1000 FORDWS55BPC

These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.

GBP 21.99
1

Forgefix Drywall Collated Screw Phillips Bugle Head SCT 3.9 x 42mm Box 1000 FORDWS42BPC

Forgefix Drywall Collated Screw Phillips Bugle Head SCT 3.9 x 42mm Box 1000 FORDWS42BPC

These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.

GBP 18.99
1

Forgefix Spectre TimberFix Screw 6.3 x 200MM (Box 50)

Forgefix Spectre TimberFix Screw 6.3 x 200MM (Box 50)

ForgeFix Spectre TimberFix are advanced Timber Fixing Screws that are widely used in exterior timber, fencing and landscaping applications. The screws have a multi-layer green Ruspert coating, which is salt spray tested to 1000 hours. They are also surface hardened for extra durability. The screws have an 8mm Hex Flange Head and feature a reamer to prevent jacking. Other features include a Quickstart Type 17 slash point, synthetic lubrication and under head ribs for a secure fix.

GBP 19.99
1

Forgefix Pipe Clip Double Cliplock 22mm Box 50 FORPCDC22

Forgefix Pipe Clip Double Cliplock 22mm Box 50 FORPCDC22

These Forgefix Double Cliplock Pipe Clips are made from heat-resistant polypropylene, designed to withstand the temperature changes in central heating systems, and are effective with temperatures of up to 100C (most pipes in domestic central heating systems operate at around 70C). APPLICATION:Used when fitting most types of pipe work. Polypropylene, also known as polypropene, is a thermoplastic polymer used in a wide variety of applications. An addition polymer made from the monomer propylene, it is rugged and unusually resistant to many chemical solvents, bases and acids.

GBP 20.99
1

Forgefix Pipe Clip Single Cliplock 28mm Box 100 FORPCSC28

Forgefix Pipe Clip Single Cliplock 28mm Box 100 FORPCSC28

These Forgefix Single Cliplock Pipe Clips are made from heat-resistant polypropylene, designed to withstand the temperature changes in central heating systems, and are effective with temperatures of up to 100C (most pipes in domestic central heating systems operate at around 70C). APPLICATION:Used when fitting most types of pipe work. Polypropylene, also known as polypropene, is a thermoplastic polymer used in a wide variety of applications. An addition polymer made from the monomer propylene, it is rugged and unusually resistant to many chemical solvents, bases and acids.

GBP 29.99
1

Forgefix Lightning Bolt Hex Head M12 X 130MM Box 25

Forgefix Lightning Bolt Hex Head M12 X 130MM Box 25

ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.

GBP 39.99
1

Forgefix Lightning Bolt Hex Head M10 X 150MM Box 25

Forgefix Lightning Bolt Hex Head M10 X 150MM Box 25

ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.

GBP 27.99
1

Forgefix Lightning Bolt Hex Head M10 X 75MM Box 50

Forgefix Lightning Bolt Hex Head M10 X 75MM Box 50

ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.

GBP 31.99
1

Forgefix Spectre TimberFix Screws 6.3 x 250mm (Box 50) FORSPETF250G

Forgefix Spectre TimberFix Screws 6.3 x 250mm (Box 50) FORSPETF250G

ForgeFix Spectre TimberFix are advanced Timber Fixing Screws that are widely used in exterior timber, fencing and landscaping applications. The screws have a multi-layer green Ruspert coating, which is salt spray tested to 1000 hours. They are also surface hardened for extra durability. The screws have an 8mm Hex Flange Head and feature a reamer to prevent jacking. Other features include a Quickstart Type 17 slash point, synthetic lubrication and under head ribs for a secure fix.

GBP 25.99
1

Forgefix Lightning Bolt Hex Head M12 X 200MM Box 20

Forgefix Lightning Bolt Hex Head M12 X 200MM Box 20

ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.

GBP 41.99
1

Forgefix Lightning Bolt Hex Head M16 x 150mm Box 10 FORLGB16150

Forgefix Lightning Bolt Hex Head M16 x 150mm Box 10 FORLGB16150

ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.

GBP 37.99
1

Forgefix Concrete Frame Screw ZYP 7.5 X 202mm (Box of 100)

Forgefix Concrete Frame Screw ZYP 7.5 X 202mm (Box of 100)

ForgeFix Concrete Frame Screws are suitable for most masonry substrates including concrete and brickwork. Widely used for batten, window and door frame fixing. These specially designed self-tapping screws are virtually stress free, allowing close to edge applications. Its torx compatible head allows for increased torque control. With a high load capacity with interlocking thread into base material. Through fixing, eliminates the need for marking and re-positioning. Finish: Zinc Yellow Passivated.

GBP 19.99
1