29 results (0,18061 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Forgefix TechFast Hex Head Roofing Screw Self-drill Heavy Section 5.5 X 35MM Pack 100

Forgefix TechFast Hex Head Roofing Screw Self-drill Heavy Section 5.5 X 35MM Pack 100

These Forgefix TechFast Hex Head Roofing Screws are designed for fixing cladding and sheet steel to heavy section steel purlins of between 6.0mm and 12.5mm. The screws have a hex head, are self-drilling and have a rubber washer which expands under pressure to form a permanent weather seal. They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours.

GBP 11.99
1

Forgefix TechFast Hex Head Roofing Screw Self-Drill Heavy Section 5.5 x 38mm Pack 100 FORTFHH5538

Forgefix TechFast Hex Head Roofing Screw Self-Drill Heavy Section 5.5 x 38mm Pack 100 FORTFHH5538

These Forgefix TechFast Hex Head Roofing Screws are designed for fixing cladding and sheet steel to heavy section steel purlins of between 6.0mm and 12.5mm. The screws have a hex head, are self-drilling and have a rubber washer which expands under pressure to form a permanent weather seal. They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours.

GBP 10.99
1

Forgefix TechFast Hex Head Roofing Screw Self-Drill Heavy Section 5.5 x 51mm Pack 100 FORTFHH5551

Forgefix TechFast Hex Head Roofing Screw Self-Drill Heavy Section 5.5 x 51mm Pack 100 FORTFHH5551

These Forgefix TechFast Hex Head Roofing Screws are designed for fixing cladding and sheet steel to heavy section steel purlins of between 6.0mm and 12.5mm. The screws have a hex head, are self-drilling and have a rubber washer which expands under pressure to form a permanent weather seal. They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours.

GBP 10.49
1

Forgefix TechFast Hex Head Roofing Screw Self-drill Heavy Section 5.5 X 80MM Pack 50

Forgefix TechFast Hex Head Roofing Screw Self-drill Heavy Section 5.5 X 80MM Pack 50

These Forgefix TechFast Hex Head Roofing Screws are designed for fixing cladding and sheet steel to heavy section steel purlins of between 6.0mm and 12.5mm. The screws have a hex head, are self-drilling and have a rubber washer which expands under pressure to form a permanent weather seal. They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours.

GBP 11.99
1

Forgefix TechFast Hex Head Roofing Screw Self-Drill Light Section 5.5 x 32mm Pack 100 FORTFHL5532

Forgefix TechFast Hex Head Roofing Screw Self-Drill Light Section 5.5 x 32mm Pack 100 FORTFHL5532

These Forgefix TechFast Hex Head Roofing Screws are designed for fixing cladding and sheet steel to light section steel purlins of between 1.2mm and 3.6mm. The screws have a hex head, are self-drilling and have a rubber washer which expands under pressure to form a permanent weather seal. They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours. 8mm Hex head

GBP 8.99
1

Forgefix TechFast Hex Head Screw Sheet to Timber 6.3 x 45mm Pack 100 FORTFHT6345

Forgefix TechFast Hex Head Screw Sheet to Timber 6.3 x 45mm Pack 100 FORTFHT6345

These Forgefix TechFast Hex Head Screws are designed specifically for fixing cladding and sheet metal to timber frame work. They have a Hex slash point head and are self-drilling for speedy insertion. The screws have a rubber washer beneath the aluminium flange which expands under pressure and forms a permanent weather seal. They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours.

GBP 11.99
1

Forgefix TechFast Hex Head Roofing Screw Self-Drill Light Section 5.5 x 45mm Pack 100 FORTFHL5545

Forgefix TechFast Hex Head Roofing Screw Self-Drill Light Section 5.5 x 45mm Pack 100 FORTFHL5545

These Forgefix TechFast Hex Head Roofing Screws are designed for fixing cladding and sheet steel to light section steel purlins of between 1.2mm and 3.6mm. The screws have a hex head, are self-drilling and have a rubber washer which expands under pressure to form a permanent weather seal. They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours. 8mm Hex head

GBP 10.99
1

Forgefix TechFast Hex Head Screw Sheet To Timber 6.3 X 32MM Pack 100

Forgefix TechFast Hex Head Screw Sheet To Timber 6.3 X 32MM Pack 100

These Forgefix TechFast Hex Head Screws are designed specifically for fixing cladding and sheet metal to timber frame work. They have a Hex slash point head and are self-drilling for speedy insertion. The screws have a rubber washer beneath the aluminium flange which expands under pressure and forms a permanent weather seal. They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours.

GBP 10.49
1

Forgefix Spectre TimberFix Screws 6.3 x 150mm (Box 50) FORSPETF150G

Forgefix Spectre TimberFix Screws 6.3 x 150mm (Box 50) FORSPETF150G

ForgeFix Spectre TimberFix are advanced Timber Fixing Screws that are widely used in exterior timber, fencing and landscaping applications. The screws have a multi-layer green Ruspert coating, which is salt spray tested to 1000 hours. They are also surface hardened for extra durability. The screws have an 8mm Hex Flange Head and feature a reamer to prevent jacking. Other features include a Quickstart Type 17 slash point, synthetic lubrication and under head ribs for a secure fix.

GBP 13.29
1

Forgefix Spectre TimberFix Screws 6.3 x 87mm (Box 50) FORSPETF87G

Forgefix Spectre TimberFix Screws 6.3 x 87mm (Box 50) FORSPETF87G

ForgeFix Spectre TimberFix are advanced Timber Fixing Screws that are widely used in exterior timber, fencing and landscaping applications. The screws have a multi-layer green Ruspert coating, which is salt spray tested to 1000 hours. They are also surface hardened for extra durability. The screws have an 8mm Hex Flange Head and feature a reamer to prevent jacking. Other features include a Quickstart Type 17 slash point, synthetic lubrication and under head ribs for a secure fix.

GBP 9.29
1

Forgefix Spectre TimberFix Screws 6.3 x 100mm (Box 50) FORSPETF100G

Forgefix Spectre TimberFix Screws 6.3 x 100mm (Box 50) FORSPETF100G

ForgeFix Spectre TimberFix are advanced Timber Fixing Screws that are widely used in exterior timber, fencing and landscaping applications. The screws have a multi-layer green Ruspert coating, which is salt spray tested to 1000 hours. They are also surface hardened for extra durability. The screws have an 8mm Hex Flange Head and feature a reamer to prevent jacking. Other features include a Quickstart Type 17 slash point, synthetic lubrication and under head ribs for a secure fix.

GBP 8.99
1

Forgefix TechFast Self-drilling Stitching Hex Screw Washer NO.1 Tip 6.3 X 25MM Box 100

Forgefix TechFast Self-drilling Stitching Hex Screw Washer NO.1 Tip 6.3 X 25MM Box 100

Forgefix TechFast Self-Drilling Stitching Hex Screws are used to join metal roofing sheet panels together. They are self-drilling up to 2.5mm. The smaller No.1 drill tip can drill through 2 sheets then engage the threads to clamp the sheets together under the head. They have an 8mm Hex head. The screws are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.

GBP 9.99
1

Forgefix TechFast Hex Head Stitching Screw Self-Drill 6.3 x 22mm Pack 100 FORTFHS6322

Forgefix TechFast Hex Head Stitching Screw Self-Drill 6.3 x 22mm Pack 100 FORTFHS6322

The Forgefix Hex Head Stitching Screws are designed specifically for joining cladding sheets together. They have a Hex head and a self-drilling point which enables speedy insertion. The rubber washer beneath the aluminium flange expands under pressure to form a permanent weather seal. The screws are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which is spray tested to 1,000 hours. They can join up to 3 sheets of 0.7mm thickness. Specifications Size 6.3 x 22mm. Pack quantity 100. Weight .589kg.

GBP 11.99
1

Forgefix TechFast Self-Drilling Stitching Hex Screw & Washer No.1 Tip 6.3 x 22mm Box 100 FORTFHWD6322

Forgefix TechFast Self-Drilling Stitching Hex Screw & Washer No.1 Tip 6.3 x 22mm Box 100 FORTFHWD6322

Forgefix TechFast Self-Drilling Stitching Hex Screws are used to join metal roofing sheet panels together. They are self-drilling up to 2.5mm. The smaller No.1 drill tip can drill through 2 sheets then engage the threads to clamp the sheets together under the head. They have an 8mm Hex head. The screws are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.

GBP 9.99
1

Forgefix ForgeFast TORX Compatible Flooring Tongue Groove Screw 3.5 x 45mm Box 200 FORFFTF3545Y

Forgefix ForgeFast TORX Compatible Flooring Tongue Groove Screw 3.5 x 45mm Box 200 FORFFTF3545Y

The ForgeFast Elite Performance Tongue & Groove Flooring Screw is specifically designed to fix tongue and groove floorboards to timber flooring joists. The design ensures no damage is caused when fixed through the tongue. The reduced head with under head ribs is designed for self-countersinking allowing a very flush fit with the next board. The anti-split, fast start thread engages quickly to form a rapid pick-up at the start of insertion. Reduced drive torque and no pre-drilling mean quick installations, whilst the fix remains firm with improved pull-out. Double cutting point reduces splitting and drive time, capable of penetrating 0.8mm steel. A firmer fix with reduced drive torque and improved pull-out provided by a serrated cutting thread. Improved holding power from reinforced countersunk neck. Concealed countersinking from reduced ribbed head. TORX compatible insert for higher transmission of power. CE approved for use in load-bearing timber construction. Molecular lubrication. Elementech 400 surface coating provides corrosion resistance. Salt spray tested to 400 hours. A Non-Cr, Cr3+, yellow/zinc plated surface is environmentally friendly. Lasts 6 times longer than standard zinc screw protective coating. Suitable for interior use.

GBP 10.29
1

Forgefix ForgeFast TORX Compatible Flooring MDF Chipboard Screw 4.2 x 55mm Box 200 FORFFFS4255Y

Forgefix ForgeFast TORX Compatible Flooring MDF Chipboard Screw 4.2 x 55mm Box 200 FORFFFS4255Y

The ForgeFast Elite Performance MDF & Chipboard Flooring Screw is specifically designed for fixing flooring grade boards to timber structures. The double cutting point breaks through the hard, dense surface of flooring grade materials. The anti-split, fast start thread can then engage quickly to form a rapid pick-up at the start of insertion. Reduced drive torque and no pre-drilling mean quick installations, whilst the fix remains firm with improved pull-out. The Under head ribs are designed for self-countersinking producing a flush secure finish on flooring. Double cutting point reduces splitting and drive time and is capable of penetrating 0.8mm steel. A firmer fix with reduced drive torque and improved pull-out provided by a serrated cutting thread. Improved holding power from the reinforced countersunk neck. Improved countersinking from the ribbed head. TORX compatible insert for a higher transmission of power. CE approved for use in load-bearing timber construction. Molecular lubrication. Elementech 400 surface coating provides corrosion resistance. Salt spray tested to 400 hours. A Non-Cr, Cr3+, yellow/zinc plated surface is environmentally friendly. Lasts up to 6 times longer than standard zinc screw protective coating. Suitable for interior use.

GBP 10.29
1

Forgefix Multi-Purpose Pozi Compatible Screw CSK ST S/Steel 5.0 x 70mm Box 100 FORPOZI570S

Forgefix Multi-Purpose Pozi Compatible Screw CSK ST S/Steel 5.0 x 70mm Box 100 FORPOZI570S

These Forgefix Multi-Purpose Pozi Compatible Screws with countersunk heads are made from A2 stainless steel. They are ideal for use in and with many materials. APPLICATIONIdeal for use in sanitary locations and in marine environments. Stainless Steel does not corrode, rust or stain with water as ordinary steel does, but despite the name it is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. Stainless steel is used where both the properties of steel and resistance to corrosion are required. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45 to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.

GBP 14.99
1

Forgefix Multi-Purpose Pozi Compatible Screw CSK ST S/Steel 4.0 x 30mm Box 200 FORPOZI430S

Forgefix Multi-Purpose Pozi Compatible Screw CSK ST S/Steel 4.0 x 30mm Box 200 FORPOZI430S

These Forgefix Multi-Purpose Pozi Compatible Screws with countersunk heads are made from A2 stainless steel. They are ideal for use in and with many materials. APPLICATIONIdeal for use in sanitary locations and in marine environments. Stainless Steel does not corrode, rust or stain with water as ordinary steel does, but despite the name it is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. Stainless steel is used where both the properties of steel and resistance to corrosion are required. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45 to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.

GBP 8.99
1

Forgefix Multi-purpose Pozi Compatible Screw Csk ST S/Steel 5.0 X 40MM Box 200

Forgefix Multi-purpose Pozi Compatible Screw Csk ST S/Steel 5.0 X 40MM Box 200

These Forgefix Multi-Purpose Pozi Compatible Screws with countersunk heads are made from A2 stainless steel. They are ideal for use in and with many materials. APPLICATIONIdeal for use in sanitary locations and in marine environments. Stainless Steel does not corrode, rust or stain with water as ordinary steel does, but despite the name it is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. Stainless steel is used where both the properties of steel and resistance to corrosion are required. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45 to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.

GBP 15.99
1

Forgefix Multi-Purpose Pozi Compatible Screw CSK ST S/Steel 5.0 x 60mm Box 100 FORPOZI560S

Forgefix Multi-Purpose Pozi Compatible Screw CSK ST S/Steel 5.0 x 60mm Box 100 FORPOZI560S

These Forgefix Multi-Purpose Pozi Compatible Screws with countersunk heads are made from A2 stainless steel. They are ideal for use in and with many materials. APPLICATIONIdeal for use in sanitary locations and in marine environments. Stainless Steel does not corrode, rust or stain with water as ordinary steel does, but despite the name it is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. Stainless steel is used where both the properties of steel and resistance to corrosion are required. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45 to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.

GBP 14.29
1

Forgefix Multi-Purpose Pozi Compatible Screw CSK ST S/Steel 4.0 x 40mm Box 200 FORPOZI440S

Forgefix Multi-Purpose Pozi Compatible Screw CSK ST S/Steel 4.0 x 40mm Box 200 FORPOZI440S

These Forgefix Multi-Purpose Pozi Compatible Screws with countersunk heads are made from A2 stainless steel. They are ideal for use in and with many materials. APPLICATIONIdeal for use in sanitary locations and in marine environments. Stainless Steel does not corrode, rust or stain with water as ordinary steel does, but despite the name it is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. Stainless steel is used where both the properties of steel and resistance to corrosion are required. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45 to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.

GBP 11.99
1

Forgefix Hexagon Nut & Nylon Insert ZP M12 Bag 50 FORNYLOC12G

Forgefix Hexagon Nut & Nylon Insert ZP M12 Bag 50 FORNYLOC12G

The Forgefix Nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component has a smaller inside diameter than the actual nut. This locks the nut in place by squeezing the nylon firmly around the bolt when tightened. Unlike a standard locking washer, the Nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened. The nuts are zinc-plated for increased resistance to corrosion. Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so. APPLICATION:Where a permanent fastening is required and loosening must be prevented by movement or vibration.Can be used on most bolt products including HT Bolts, Carriage Bolts, Threaded Rod etc. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 9.39
1

Forgefix Carriage Bolt & Nut ZP M12 x 200mm Bag 5 FORCB12200G

Forgefix Carriage Bolt & Nut ZP M12 x 200mm Bag 5 FORCB12200G

These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a Fully Threaded Cup Square Hex Bolt, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.

GBP 8.99
1

Forgefix Carriage Bolt Nut ZP M10 X 200MM Bag 10

Forgefix Carriage Bolt Nut ZP M10 X 200MM Bag 10

These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a Fully Threaded Cup Square Hex Bolt, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.

GBP 8.99
1

Forgefix Carriage Bolt & Nut ZP M10 x 300mm Bag 10 FORCB10300M

Forgefix Carriage Bolt & Nut ZP M10 x 300mm Bag 10 FORCB10300M

These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a Fully Threaded Cup Square Hex Bolt, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.

GBP 8.99
1