Pricemate

Elmdene ACCESS-PSU Access Control Small Enclosure 13.8Vdc 2A

Elmdene ACCESS-PSU Access Control Small Enclosure 13.8Vdc 2AThis range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty13.8V dc 2A BM SMPSU to fit 1 x small controller Enclosure size 275H X 330W X 80D Max battery 12V 7AhPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 89.68

1

Elmdene ACCESS-PSU2 Access Control Mid-Sized Enclosure 13.8Vdc 4A

Elmdene ACCESS-PSU2 Access Control Mid-Sized Enclosure 13.8Vdc 4AThis range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty13.8V dc 4A BM SMPSU 4-way Fused Output Module to fit 4 x small or 2 x mid-sized door controllers. Enclosure size 500H x 400W x 80D Max Battery 12V 17AhPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 171.85

1

Elmdene ACCESS-PSU1 Access Control Mid-Sized Enclosure 13.8Vdc 4A

Elmdene ACCESS-PSU1 Access Control Mid-Sized Enclosure 13.8Vdc 4AThis range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty13.8V dc 4A BM SMPSU 4-way Fused Output Module to fit 2 x small or 1 x mid-sized door controllers Enclosure size 330H x 355W x 80D Max Battery 12V 17Ah.Please note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 123.91

1

Elmdene ACCESS-PSU2-8A Access Control Mid-Sized Enclosure 13.8Vdc 8A

Elmdene ACCESS-PSU2-8A Access Control Mid-Sized Enclosure 13.8Vdc 8AThis range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty13.8Vdc 8A SMPSU 4-way Fused Output Module to fit 4 x small or 2 x mid-sized door controllers or 4 x Net2 Controllers Enclosure size 500H x 400W x 80D Max Battery 12V 17AhPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 203.95

1

Elmdene VRS122000-PTC-P 12Vdc CCTV PSU Outdoor Applications

Elmdene VRS122000-PTC-P 12Vdc CCTV PSU Outdoor ApplicationsA switch mode power supply unit providing 12V dc 2A max in a compact IP66 rated enclosure ideal for CCTV applications. Featuring a regulated 12V dc SMPSU module it can continuously supply full rated current to load while its universal mains input voltage enables the power supply to be used across a wide geographical area. The highly efficient switch mode design generates less heat and ensures low operating costs.The output of the PSU is provided with a resettable PTC fuse providing protection to the powered circuit in the event of a short circuit occurring. A resettable fuse allows the user to resolve a fault on an output circuit without the need of replacing a blown internal fuse within the enclosure. Once the fault has been rectified the fuse automatically resets and the power is resumed.Key Features12V dc 2A 1x 2A outputIP66 enclosure2 x cable glands providedSwitch Mode design

GBP 35.89

1

Elmdene 4M Flush Pencil Contact - Grade 2 Plastic Potted With Cable Tail 10M - Pack of 10

Elmdene 4M Flush Pencil Contact - Grade 2 Plastic Potted With Cable Tail 10M - Pack of 10The 4M and 6M range of plastic flush mounting contacts are for use in domesticcommercial installations within nonferrous materials. They feature a fully encapsulated plastic body potted cable tail and long-life rhodium contacts.This product is designed to meet the requirements of EN50131-2-62008 Grade 2 and Environmental Class III. Suitable for use in systems designed to comply with PD66622017.Key Features4 conductorsEncapsulated plastic bodyPush fit with countersunk flange10mm working distance

GBP 23.35

1

Elmdene MULTI-ACCESS-PSU6 Access Control 13.8Vdc 8A

Elmdene MULTI-ACCESS-PSU6 Access Control 13.8Vdc 8A13.8Vdc 8A 27.6Vdc 4A BM SMPSU 8-Way Fused Output Module. PSU enclosure base that houses multiple access control devices Enclosure size 515H x 478W x 146Dmm Max battery 12V 17Ah.This range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 358.43

1

Elmdene MULTI-ACCESS-PSU2 Access Control 13.8Vdc 8A

Elmdene MULTI-ACCESS-PSU2 Access Control 13.8Vdc 8A13.8Vdc 8A 27.6Vdc 4A BM SMPSU 8-Way Fused Output Module. PSU enclosure base that houses multiple access control devices expandable with ACCESS-EXP-PLATE Enclosure size 515H x 478W x 146Dmm Max battery 12V 17Ah.This range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 285.58

1

Elmdene 4B-1000 Flush Pencil Contact - Grade 2 Plastic Potted With 10M Cable Tail - Pack of 10

Elmdene 4B-1000 Flush Pencil Contact - Grade 2 Plastic Potted With 10M Cable Tail - Pack of 10The 4B-1000 is part of Elmdenes extensive range of magnetic contacts. It is a flush mounted pencil type with potted cable standard 10m length. It is ideal for use in both domestic and commercial installations in both single and multiple door configurations.Constructed from plastic with a brass capped flange the 4B-1000 has an operating gap of 10mm.The 4B range is designed to meet the requirements of EN50131-2-62008 Grade 2 and Environmental Class III. Like all Elmdene magnetic contacts the 4B is constructed from high quality materials and is easy to install set up and commission with any intruder panel.Key FeaturesPlastic Brass constructionPencil Style 7.5mmSleek and symmetrical designPush fit installationEnvironmental Class IIIPack of 10

GBP 97.92

1

Elmdene ACCESS-UL-PSU1 UL294 12V 4A PSU With 4 Way Fused Output Module In G Box

Elmdene ACCESS-UL-PSU1 UL294 12V 4A PSU With 4 Way Fused Output Module In G BoxElmdenes UL294-certified power solutions have been designed for compatibility with the most common access control door controllers. They offer installation flexibility and are a time-saving solution for system designers.These enclosures are engineered to accommodate multiple door controllers providing power integration within access control systems. This enables robust power management to ensure seamless operation and optimised performance of your access control systems.By choosing Elmdenes compliant power solutions you can rest assured that your access control systems will operate smoothly and efficiently. These power solutions are the perfect fit for system designers who value flexibility and reliability in their power supply solutions.This high efficiency cost effective UL294-listed power supplycharger is designed for use in Access Control systems enclosed in two spacious cabinet choices each fitted with locks and tamper switch.Regulated 13.8Vdc output with battery stand-by supplying rated current to 4 independently PTC Fused Outputs resettable fuses individually configured for continuous or switched output current via a fire relay switch with flexible trigger options capable of operating with any external control signal. PSU Universal mains input. Two dry volt free contacts are provided to signal loss of mains and battery output faults.Key FeaturesSingle and Multi-door solutions12V standby battery chargingMulti-fused outputs are providedMains fail reportingBattery Monitoring and Deep Discharge Protection ACCESS-UL-PSU1 and ACCESS-UL-PSU2Independent ancillary relay for applications such as a Fire door release relayIntegration with door controllers including Mercury Security ProWatch HoneywellG Enclosure 440 x 250 x 115

GBP 241.67

1

Elmdene G13804BM-4-B Switch Mode PSU 13.8V

Elmdene G13804BM-4-B Switch Mode PSU 13.8V12V Switch Mode PSU 13.8V 3Amp to load 0.5A battery charging. Efficient Switch Mode operation. Mains and Battery monitoring with independent volt free fault outputs. Deep discarge protection. Multi LED status indication. Fit up to 17Ah battery. UnboxedThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 130.86

1

Elmdene ACCESS-UL-PSU2 UL294 12V 4A PSU With 4 Way Fused Output Module In D Box

Elmdene ACCESS-UL-PSU2 UL294 12V 4A PSU With 4 Way Fused Output Module In D BoxElmdenes UL294-certified power solutions have been designed for compatibility with the most common access control door controllers. They offer installation flexibility and are a time-saving solution for system designers.These enclosures are engineered to accommodate multiple door controllers providing power integration within access control systems. This enables robust power management to ensure seamless operation and optimised performance of your access control systems.By choosing Elmdenes compliant power solutions you can rest assured that your access control systems will operate smoothly and efficiently. These power solutions are the perfect fit for system designers who value flexibility and reliability in their power supply solutions.This high efficiency cost effective UL294-listed power supplycharger is designed for use in Access Control systems enclosed in two spacious cabinet choices each fitted with locks and tamper switch.Regulated 13.8Vdc output with battery stand-by supplying rated current to 4 independently PTC Fused Outputs resettable fuses individually configured for continuous or switched output current via a fire relay switch with flexible trigger options capable of operating with any external control signal. PSU Universal mains input. Two dry volt free contacts are provided to signal loss of mains and battery output faults.Key FeaturesSingle and Multi-door solutions12V standby battery chargingMulti-fused outputs are providedMains fail reportingBattery Monitoring and Deep Discharge Protection ACCESS-UL-PSU1 and ACCESS-UL-PSU2Independent ancillary relay for applications such as a Fire door release relayIntegration with door controllers including Mercury Security ProWatch HoneywellD Enclosure 505 x 407 x 80

GBP 280.66

1

Elmdene G13803BMU 12V Switch Mode Power Supply Unit 4A

Elmdene G13803BMU 12V Switch Mode Power Supply Unit 4AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty12V Switch Mode PSU 13.8V 3Amp to load 0.5A battery charging.Efficient Switch Mode operation.Mains and Battery monitoring with independent volt free fault outputs.Deep discarge protection.Multi LED status indication. Fit up to 17Ah battery. UnboxedPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 80.29

1

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2 x 17Ah Batteries

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2 x 17Ah BatteriesThe STX2405 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 5 Amps continuous into the load in addition to providing up to 850mA for charging the standby batteries up to 17Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation. Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 5A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 17AhE Box Power Supply 420h x 400w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 188.21

1

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2x 7Ah Batteries

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2x 7Ah Batteries -STX2405-CThe STX2405 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 5 Amps continuous into the load in addition to providing up to 850mA for charging the standby batteries up to 17Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation. Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 5A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 7AhC Box Power Supply - 275h x 330w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 167.24

1

Elmdene 24Vdc 2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah Batteries

Elmdene 24Vdc 2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah BatteriesThe STX2402 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 2.0 Amps continuous into the load in addition to providing up to 700 mA for charging the standby batteries up to 17 Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition. Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 2.0A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 7AhC Box Power Supply - 275h x 330w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 147.38

1

Elmdene 24Vdc 1.8A 0.7A Switch Mode PSU EN54 Approved 2 x 17Ah Batteries

Elmdene 24Vdc 1.8A 0.7A Switch Mode PSU EN54 Approved 2 x 17Ah BatteriesThe STX2402 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 2.0 Amps continuous into the load in addition to providing up to 700 mA for charging the standby batteries up to 17 Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition. Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 2.0A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 17AhE Box Power Supply - 420h x 400w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 164.36

1

Elmdene 24Vdc 8A 1.6A Switch Mode PSU EN54 Approved 2 x 38Ah Batteries

Elmdene 24Vdc 8A 1.6A Switch Mode PSU EN54 Approved 2 x 38Ah BatteriesThe STX2410 is an EN54-4 approved power supply ideal for use in Fire control Systems. Its regulated 27.6V dc output will supply a total of 10 Amps continuous into the load whilst also enabling battery charging. 7.2 Amps Load with 65Ah batteries 10 Amps with 18Ah batteries 8A with 38Ah Batteries.The power supply output features electronic short circuit protection under both mains and standby battery operation. Maximum battery life is assured through continuous active battery monitoring and the use of a three stage charger comprising bulk absorb and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 2 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the battery. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 10 A current to load at 27.6V dc nominal regulated output.Charging capability to support 18 38 or 65Ah batteries with intelligent load enhancement.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls to 21 V.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present.RS232 serial interface for fault reporting and diagnostics interface to OEM equipment.Suitable to fit batteries up to 2 x 38AhH Box Power Supply - 420h x 420w x 180dHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 377.77

1

Elmdene 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 1.2Ah Batteries

Elmdene 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 1.2Ah BatteriesThe STX2401 is an EN54-41997 A1 A2 approved power supply ideal for use in Fire Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 1.2 Amps continuous current into the load in addition to providing up to 300mA for charging the standby batteries up to 7Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby the batteries are charged for 4 hours in every 24 hour period while still being continuously monitored. This reduces wasted energy in charging already fully charged batteries and extends their working life. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 A2.Up to 1.2A current to load at 27.6V dc nominal regulated output.Charging capability to support 1.2 to 7Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection or circuitimpedance Ri in excess of 500mW caused by connector or wiring problemcorrosion within 4 hours.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 1.2AhT Box Power Supply - 300h x 240w x 63d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 115.54

1

Elmdene STX2401-C 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah Batteries

Elmdene STX2401-C 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah BatteriesThe STX2401 is an EN54-41997 A1 A2 approved power supply ideal for use in Fire Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 1.2 Amps continuous current into the load in addition to providing up to 300mA for charging the standby batteries up to 7Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby the batteries are charged for 4 hours in every 24 hour period while still being continuously monitored. This reduces wasted energy in charging already fully charged batteries and extends their working life. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 A2.Up to 1.2A current to load at 27.6V dc nominal regulated output.Charging capability to support 1.2 to 7Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection or circuitimpedance Ri in excess of 500mW caused by connector or wiring problemcorrosion within 4 hours.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 7AhC Box Power Supply - 275h x 330w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 136.90

1

Brand

Merchant

Price (EUR)