226 results (0,15669 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Elmdene BATT-BOX-3802V Enclosure For Up To 2 x 38Ah Batteries For Use With 2405STE PSU - Complete With Connection Lead

Elmdene BATT-BOX-3802V Enclosure For Up To 2 x 38Ah Batteries For Use With 2405STE PSU - Complete With Connection Lead

Elmdene BATT-BOX-3802V Enclosure For Up To 2 x 38Ah Batteries For Use With 2405STE PSU - Complete With Connection LeadThe BATT-BOX-3802V is an external battery box designed for use with the 2405STE power supply.Key FeaturesMaximum battery size 2 x 38AhDimensions H 420 X W 420 X D 180 mmComes with connection leadPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 166.02
1

Elmdene ACCESS-EXP-PLATE Expander Plate for MULTI-ACCESS-PSU2

Elmdene ACCESS-EXP-PLATE Expander Plate for MULTI-ACCESS-PSU2

Elmdene ACCESS-EXP-PLATE Expander Plate for MULTI-ACCESS-PSU2This range has been specifically designed to house most common access control door controllers. With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models off er fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also off er additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoff s supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost eff ective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty

GBP 45.48
1

Elmdene MFR-1 Mains Fail Relay For Use With Any PSU

Elmdene MFR-1 Mains Fail Relay For Use With Any PSU

Elmdene MFR-1 Mains Fail Relay For Use With Any PSUStand-alone Mains Fail Relay provides a volt free fault output for remote signalling of a mains fail condition.Key FeaturesInstantly detects loss of mainsNC contacts rated at 8A 27.6VCan be fitted to most Elmdene boxed 12 24V Power SuppliesNormally closed volt free contact opens on mains failureSupplied with choice of stand-offsMaximum Supply Voltage 230Vac - 10Maximum Switching Current 8A 27.6V dcOperating Temperature -10 to 40CDimensions 65L x 60W x 30D

GBP 18.79
1

Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live SounderThe INT600 sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT600 will emit a high intensity sound for alarm and an adjustable low level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT600 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 108db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate 160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 21.85
1

Elmdene VS303 High Security Contact - Grade 3 - Surface - Large Heavy Duty - Anodised Aluminium

Elmdene VS303 High Security Contact - Grade 3 - Surface - Large Heavy Duty - Anodised Aluminium

Elmdene VS303 High Security Contact - Grade 3 - Surface - Large Heavy Duty - Anodised AluminiumElmdene offer an extensive range of high-quality magnetic contacts for intruder and access control systems.The VS303 is designed for high security applications and features a heavy duty anodised aluminium exterior.Meets the requirements ofPD66622010EN50131-12006EN50131-2-62008Key FeaturesTriple Biased with Active tamper5mm operating gapIncludes security cover plate109L x38w x19DIdeal for single or multiple doorsCabledIP67 ratedDetection of magnetic field interference5-year warrantyPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 109.87
1

Elmdene INT400S EN50131-4 Security Grade 2 Internal Live Sounder

Elmdene INT400S EN50131-4 Security Grade 2 Internal Live Sounder

Elmdene INT400S EN50131-4 Security Grade 2 Internal Live SounderThe INT400S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT400S will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT400S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesInternal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 22.49
1

Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live SounderThe INT500S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT500S will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT500S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 30.64
1

Elmdene INT400 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT400 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT400 EN50131-4 Security Grade 3 Dual Internal Live SounderThe INT400 sounder is used for notification of an alarm condition as generated within an intruder hold-up or other alarm system. In response to commands from the alarm system control panel the INT400 will emit a high intensity sound.The sounder will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT400 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 110db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 18.60
1

Elmdene INT500 EN50131-4 Security Grade 3 Dual Internal Live Sounder with Strobe

Elmdene INT500 EN50131-4 Security Grade 3 Dual Internal Live Sounder with Strobe

Elmdene INT500 EN50131-4 Security Grade 3 Dual Internal Live Sounder with StrobeThe INT500 sounder is used for notification of an alarm condition as generated within an intruder hold-up or other alarm system. In response to commands from the alarm system control panel the INT500 will emit a high intensity sound andor operate a visual flash.It will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT500 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 108db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 23.58
1

Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live SounderThe INT600S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT600 will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT600S is classified as an internal remote powered sounder and is powered via an external power source.The INT600S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 25.43
1

Elmdene 4RSC50SS300GN Roller Shutter Contact - Grade 2 - IP67 - Heavy Duty Aluminium Pack of 10

Elmdene 4RSC50SS300GN Roller Shutter Contact - Grade 2 - IP67 - Heavy Duty Aluminium Pack of 10

Elmdene 4RSC50SS300GN Roller Shutter Contact - Grade 2 - IP67 - Heavy Duty AluminiumPack of 10A magnetic contact designed for sliding door Elmdene 4RSC with armoured cable.Key FeaturesPotted 4 wire50cm SS3m cableIntegral 1k1k resistors70mm operating gapScrew fixSize Contact - 175mm x 52mm x 15mmMagnet - 85mm x 70mm x 35mmPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 265.78
1

Elmdene AMS-EBIR3-RG Infra-Red Exit Device - 12V - Stainless Steel Plate

Elmdene AMS-EBIR3-RG Infra-Red Exit Device - 12V - Stainless Steel Plate

Elmdene AMS-EBIR3-RG Infra-Red Exit Device - 12V - Stainless Steel PlateThe AMS-EBIR3-RG is a touch-free exit button ideal for clean environments or buildings for contactless door control within a building. IR Exit Devices are designed for use in access control systems.The Elmdene IR exit device is a proximity touch free request to exit device designed for use in access control systems. Offered in a standard UK single gang plate size it is made from durable stainless steel with an IP65 rated Infra-Red switch component.The smart stainless steel plate with the LED illumination provides a modern and aesthetically pleasing solution to a buildings door entryexit system.The standard colour indication for the IR exit devices is red for standby and green for activated. However it is possible for this to be reversed by use of a jumper allowing green to be used for standby and red for activated. This gives flexibility to the installer should a particular colour coding be required.ApplicationsReduce contact and transmission of infections in high traffic areas such as hospitals food preparation rooms care homes and schools.Key FeaturesDiscrete surface mount designTouch-free activationRed LED turns Green when activated interchangeableMade from durable stainless steelAdjustable latch time from 0.5 to 30 secondsAdjustable trigger distance from 4 - 15cmDesigned to prevent any interference with other infra-red devicesLong life infra-red sensor 100000 hours relay 1000000 operationsIR switch component is IP65 rated1 year warrantyComNONC ContactsAdjustable range and latch time

GBP 34.45
1

Elmdene BATT-BOX-65-BLACK Floor Standing 65Ah Battery Box Black with Battery Leads

Elmdene BATT-BOX-65-BLACK Floor Standing 65Ah Battery Box Black with Battery Leads

Elmdene BATT-BOX-65-BLACK Floor Standing 65Ah Battery Box Black with Battery LeadsThis range of switch mode power supplies has been designed specifically for fire systems and are certified to EN54-41997 A12002 A22006.Key FeaturesIntelligent battery charging and monitoring - utilises Elmdene Eco- Charge technologyRemote fault signallingFull rated current to load plus additional current for battery chargingSerial communication available for OEM applications on request3 year warrantyColour BlackPlease note The image is for illustrative purposes only. This product will come in the colour black.

GBP 221.17
1

Elmdene EN3-LSC-GN Surface Contact - Grade 3 - Large - Plastic White - Pack of 10

Elmdene EN3-LSC-GN Surface Contact - Grade 3 - Large - Plastic White - Pack of 10

Elmdene EN3-LSC-GN Surface Contact - Grade 3 - Large - Plastic WhiteElmdene offer an extensive range of high-quality magnetic contacts for intruder and access control systems including the CPNI Approved Grade 3 EN3-RSA and High Security VS303. The EN3-LSC-GN is grade 3 and features a plastic white exterior.Key Features7mm operating gapPotted with 1m of cableIntegral 1k1k resistors93L x 25w x 25dSurface mountingFSL and double pole operation modeIdeal for single or multiple doors5-year warrantyPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 140.95
1

Elmdene QST-RD Surface Contact - Grade 2 - Small - Plastic Pack of 10

Elmdene QST-RD Surface Contact - Grade 2 - Small - Plastic Pack of 10

Elmdene QST-RD Surface Contact - Grade 2 - Small - Plastic Pack of 10The 20mm operating gap. Terminal connection. Integral resistors according to colour code -yy. For use in FSL or DP systems single or multiple doors.The Elmdene range features high quality ABS surface magnetic contacts available as cabled or terminal devices.Key FeaturesSurface mountingAvailable in white or brownFSL and double pole operation modeIdeal for single or multiple doorsIP43 and IP67 rated versions5 year warranty70L x 17w x 15dPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 48.05
1