Pricemate

Dunlop BTL 5SR48 - 10B-1 (5/8" X 3/8") - Simplex Sprockets - Pilot Bore

5SR48 - 10B-1 (5/8" X 3/8") - Simplex Sprockets - Pilot Bore by Dunlop BTL

GBP 42.99

1

Dunlop BTL SPB180/5 Pilot Bore 5-Groove Pulley

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3 mm). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 129.99

1

Dunlop BTL SPA080/5 Pilot Bore 5-Groove Pulley

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7 mm). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 34.99

1

Dunlop BTL SPB170/5 Taper Bore 5-Groove Pulley 3020

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 74.99

1

Dunlop BTL SPB100/5 Taper Bore 5- Groove Pulley 1615

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 49.99

1

Dunlop BTL SPA140/5 Taper Bore 5-Groove Pulley 2517

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPA250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 41.99

1

Dunlop BTL SPB140/5 Taper Bore 5-Groove Pulley 2517

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 55.99

1

Dunlop BTL SPA200/5 Taper Bore 5-Groove Pulley 3020

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPA250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 75.99

1

Dunlop BTL SPZ800/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPZ V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPZ (9.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPZ) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPZ250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 349.99

1

Dunlop BTL SPB132/5 Taper Bore 5-Groove Pulley 2517

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 49.99

1

Dunlop BTL SPC800/5 Taper Bore 5-Groove Pulley 5040

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 1099.99

1

Dunlop BTL SPB500/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 319.99

1

Dunlop BTL SPZ190/5 Taper Bore 5-Groove Pulley 2517

Dunlop SPZ V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPZ (9.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPZ) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPZ250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 37.99

1

Dunlop BTL SPB450/5 Taper Bore 5-Groove Pulley 3525

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 299.99

1

Dunlop BTL SPB630/5 Taper Bore 5-Groove Pulley 4040

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 449.99

1

Dunlop BTL SPC280/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 279.99

1

Dunlop BTL SPB450/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 299.99

1

Dunlop BTL SPC800/5 Taper Bore 5-Groove Pulley 5050

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 1099.99

1

Dunlop BTL SPA160/5 Taper Bore 5-Groove Pulley 2517

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPA250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 51.99

1

Dunlop BTL SPA100/5 Taper Bore 5-Groove Pulley 1615

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPA250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 26.99

1

Dunlop BTL SPA118/5 Taper Bore 5-Groove Pulley 2012

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPA250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 33.99

1

Dunlop BTL SPZ400/5 Taper Bore 5-Groove Pulley 3020

Dunlop SPZ V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPZ (9.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPZ) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPZ250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 139.99

1

Dunlop BTL SPA315/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPA250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 149.99

1

Dunlop BTL SPC236/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 169.99

1

Dunlop BTL SPC236/5 Taper Bore 5-Groove Pulley 3525

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.