115 results (0,21495 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

DeWalt ToughSystem 2.0 DXL Shallow Drawer Unit

DeWalt ToughSystem 2.0 DXL Shallow Drawer Unit

The DEWALT TOUGHSYSTEM 2.0 DXL Shallow Drawer Unit has been designed to withstand the rigours of on-site use. Its durable structure features an impact-resistant body reinforced with integrated steel bars. A weather seal, protects the contents against water and dust. Metal ball-bearing slides allow the drawers to open smoothly and an automatic quick-latching mechanism keeps them closed. Protect tools and equipment from theft with the integrated metal bar enabling the drawer to be secured using a padlock (not included) Fitted with side metal racks acting as handles for easy transportation or allowing you to hang power tools or accessories, for quick accessibility on the job. Auto stacking latches allow for easy connection with any DXL modules as well as any TOUGHSYSTEM module, including half width units. Supplied with a number of dividers to organise your tools and accessories with ease. Specifications: Drawer Dimensions: 645 x 470 x 60mm.Volume: 42.8 Litre.Max. Load: 25kg (12.5kg per drawer) .

GBP 259.99
1

DeWalt ToughSystem 2.0 DXL Deep Drawer Unit

DeWalt ToughSystem 2.0 DXL Deep Drawer Unit

The DEWALT TOUGHSYSTEM 2.0 DXL Deep Drawer Unit has been designed to withstand the rigours of on-site use. Its durable structure features an impact-resistant body reinforced with integrated steel bars. A weather seal protects the contents against water and dust. Metal ball-bearing slides allow the drawer to open smoothly and an automatic quick-latching mechanism keeps them closed. Protect tools and equipment from theft with the integrated metal bar enabling the drawer to be secured using a padlock (not included) Fitted with side metal racks acting as handles for easy transportation or to allow you to hang power tools or accessories, for quick accessibility on the job. Auto stacking latches allow for easy connection with any DXL modules as well as any TOUGHSYSTEM module, including half width units. Supplied with a number of dividers to organise your tools and accessories with ease. Specifications: Drawer Dimensions: 645 x 470 x 145mm.Volume: 47 Litre.Max. Load: 25kg.

GBP 359.99
1

DeWalt DWE315B Corded Multi-Tool with Bag 300W 240V DEWDWE315B

DeWalt DWE315B Corded Multi-Tool with Bag 300W 240V DEWDWE315B

The DEWALT DWE315B Corded Multi-Tool is fitted with a powerful motor and a variable speed trigger for complete control. For ease of use, it features quick accessory change and adjustment, no hex key required. The body features superior ergonomics, the soft comfort grip helps to reduce user fatigue whilst improving control. It is supplied with a 28 piece accessory set that contains 1 x Rigid Scraper 1 x Sanding Platen 25 x Sanding Sheets (Assorted Grades) 1 x Dust Extraction Adaptor Plus 1 x Universal Adaptor 2 x Hex Keys 3mm and 5mm 1 x Tool Bag Specification Input Power 300W No Load Speed 0-22,000/min. Weight 1.5kg

GBP 189.99
1

DeWalt DCS353D2 XR BL Multi-Tool 12V 2 x 2.0Ah Li-ion DEWDCS353D2

DeWalt DCS353D2 XR BL Multi-Tool 12V 2 x 2.0Ah Li-ion DEWDCS353D2

The DEWALT DCS353 XR Brushless Multi-Tool has a dual-grip variable speed trigger, with a lock-on feature allows greater control when cutting/scraping/sanding. A quick-change accessory system allows blades and attachments to be changed quickly. Its universal accessory adaptor enables use with most oscillating tool accessory brands. The compact, lightweight design allows improved access into confined spaces. Fitted with an airlock compatible dust adaptor for quicker/more secure dust extraction connection/performance. There is also a bright LED light which illuminates dark work surfaces for accurate cutting. Specifications: No Load Speed: 0-18,000/min.Oscillation Angle: 1.6.Weight: 0.86kg (without battery).

GBP 229.99
1

DeWalt DCL074 XR Tool Connect Area Light 18V Bare Unit DEWDCL074

DeWalt DCL074 XR Tool Connect Area Light 18V Bare Unit DEWDCL074

The DEWALT DCL074 XR Tool Connect Area Light with 3 brightness settings, up to a maximum of 5000 lumens. It has a 360 beam pattern the precision engineered lens with 150 flutes delivers a bright even beam pattern to illuminate entire working space. Fitted with a robust roll cage for increased durability, designed to withstand tough job site environments. With the Tool Connect app, users can wirelessly power on and off the unit as well as customise settings such as the light intensity, alerts for low charge and set individual schedules for the day, time and intensity. There is also a tripod mount and hang hook, which allow for versatile positioning. IP54 rated for water and dust protection. Bare Unit, No Battery or Charger Supplied. Specification Light Output 1,500/3,200/5,000 lumens

GBP 219.99
2

DWE315KT Multi-Tool Quick Change Kit & TSTAK 300W 110V DEWDWE315KTL

DWE315KT Multi-Tool Quick Change Kit & TSTAK 300W 110V DEWDWE315KTL

The DEWALT DWE315KT corded Multi Tool has a powerful 300 Watt motor and superior ergonomics to offer comfortable use. For ease of use, it features quick accessory change and adjustment, requiring no Hex Key. The variable speed trigger provides ultimate control. It is supplied with a tough, durable T-STAK Kit box, and a 37-piece accessory set that contains 1 x Oscillating Wood with Nails Blade. 1 x Oscillating Fastcut Wood Blade. 1 x Oscillating Wood Detail Blade. 1 x Oscillating Semi Circle Wood Blade. 1 x Oscillating Semi Circle Grout Removal Blade. 1 x Oscillating Rigid Scraper. 1 x Oscillating Sanding Plate. 25 x Sanding Sheets (Assorted Grades). 1 x Universal Adaptor. 2 x Hex Keys 3mm and 5mm. 1 x Dust Extraction Adaptor. 1 x Depth stop / straight cut guide. 1 x T-Stak Kit Box. Specifications Input Power 300 Watt. No Load Speed 0-22,000/min. Weight 1.5kg. DEWALT DWE315KT Multi Tool Quick Change Kit & TSTAK 300 Watt 110 Volt Version.

GBP 239.99
1

DeWalt DCS438E2T XR BL Cut Off Tool 18V 2 X Powerstack Li-Ion

DeWalt DCS438E2T XR BL Cut Off Tool 18V 2 X Powerstack Li-Ion

The DEWALT DCS438E2T XR Brushless Cut Off Tool is designed to cut through a variety of materials such as metal, tile, stone, plastic and drywall/fibre cement. With both forward and reverse capability, you can conveniently change the direction of the cut depending on the application. The included dust shroud with adjustable shoe and AirLock connection allows for convenient attachment to DEWALT extractors, whilst the integrated LED lets you work in dark spaces. POWERSTACK batteries deliver 50% more power* with a 25% smaller** footprint and work with all DEWALT 18V XR tools. * Regarding 50% more power: vs DCB183 battery, not in application. ** Regarding 25% smaller pack and a more compact footprint: vs DCB183 battery. Supplied with: 2 x 18V 1.7Ah POWERSTACK Li-ion Batteries, 1 x POWERSTACK Compact Charger and 1 x TSTAK Carry Case. Specifications: No Load Speed: 20,000/min.Max. Cutting Capacity: 22mm.Disc : 76mm.Weight: 0.8kg.

GBP 399.99
1

DeWalt Lighted USB Charging Tool Backpack

DeWalt Lighted USB Charging Tool Backpack

Internal Custom Design Battery Dock Use Your Dewalt 20V MAX Lithium Ion Battery and our Internal Custom Design Battery Dock as a USB Charging Source. BATTERY NOT INCLUDED USB Charging Battery Dock Simultaneously charges 2 devices via USB ports. Maximum 2 Amps shared output 3 Internal Charging Wall Pockets Fit tablet, phone, and/or camera Low Battery Cut-Off Protection Monitors battery voltage to avoid battery charge over-depletion 31 Multi-Use Pockets Inside and 2 Outside Organises a wide variety of hand tools.Large Pads on Back For Extra Comfort Large Pads on Back For Extra Comfort Make carrying heavier loads more comfortable on stress areas of the back Padded Web Carrying Handles and Adjustable Shoulder Straps Make carrying more comfortable, plus convenience handles on each end for quick from stow to go Base Pad Feet Helps Reduce Wear and Abrasion

GBP 179.99
1

DeWalt DCF622N XR Brushless Self Drilling Screwdriver 18V Bare Unit DEWDCF622N

DeWalt DCF622N XR Brushless Self Drilling Screwdriver 18V Bare Unit DEWDCF622N

The DEWALT DCF622 XR Brushless Self Drilling Screwdriver is ideal for the quick fitting of metal roofing and other sheet metal applications. It's versa-clutch delivers a repeatable screw setting with minimum fuss. Fitted with a high torque brushless motor that drives screws up to 6.15mm diameter efficiently and effectively offering maximum run time and a compact tool. Durable, ergonomic design and rubber grip for improved user comfort. Specifications: Bit Holder: 6.35mm (1/4in).No Load Speed: 0-2,000/min.Max. Torque: 11/34Nm.Max. Screw Diameter: 6.15mm.Weight: 1.97kg.

GBP 234.99
2

DeWalt DCF892P2T XR BL High Torque 1/2in Impact Wrench 18V 2 x 5.0Ah Li-ion DEWDCF892P2T

DeWalt DCF892P2T XR BL High Torque 1/2in Impact Wrench 18V 2 x 5.0Ah Li-ion DEWDCF892P2T

The DEWALT DCF892 XR Impact Wrench has an efficient brushless motor and 1/2in square drive plus detent pin allowing for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed. * Mode 2 Mid Speed tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed. * Mode 3 High Speed tool operates at normal speed, reverse tool operates at normal speed. * Mode 4 Precision Wrench tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification Bit Holder 1/2in Detent Pin No Load Speed 0-2,000/min. Impact Rate 0-3,250/bpm Max. Torque 812Nm Breakaway Torque 1152Nm Weight 1.6kg (without battery)

GBP 399.99
1

DeWalt DCF900P2T XR Brushless 1/2in High Torque Impact Wrench 18V 2 x 5.0Ah Li-ion DEWDCF900P2T

DeWalt DCF900P2T XR Brushless 1/2in High Torque Impact Wrench 18V 2 x 5.0Ah Li-ion DEWDCF900P2T

The DEWALT DCF892 XR Impact Wrench has an efficient brushless motor and 1/2in square drive plus detent pin allowing for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed. * Mode 2 Mid Speed tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed. * Mode 3 High Speed tool operates at normal speed, reverse tool operates at normal speed. * Mode 4 Precision Wrench tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification Bit Holder 1/2in Detent Pin No Load Speed 0-2,000/min. Impact Rate 0-3,250/bpm Max. Torque 812Nm Breakaway Torque 1152Nm Weight 1.6kg (without battery)

GBP 369.99
1

DeWalt DCF922P2T XR BL 1/2in Impact Wrench 18V 2 x 5.0Ah Li-ion DEWDCF922P2T

DeWalt DCF922P2T XR BL 1/2in Impact Wrench 18V 2 x 5.0Ah Li-ion DEWDCF922P2T

The DEWALT DCF922 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with detent pin for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed. * Mode 2 Mid Speed tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed. * Mode 3 High Speed tool operates at normal speed, reverse tool operates at normal speed. * Mode 4 Precision Wrench tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification Bit Holder 1/2in Detent Pin No Load Speed 2,500/min. Impact Rate 3,600/bpm Max. Fastening Torque 406Nm Nut Busting Torque 610Nm Weight 1.1kg (without battery) The DEWALT DCF922P2T XR Brushless 1/2in Impact Wrench is supplied with 2 x 18V 5.0Ah Li-ion Batteries 1 x Charger 1 x TSTAK Kitbox

GBP 349.99
1

DeWalt DCF921D2T XR BL 1/2in Impact Wrench 18V 2 x 2.0Ah Li-ion DEWDCF921D2T

DeWalt DCF921D2T XR BL 1/2in Impact Wrench 18V 2 x 2.0Ah Li-ion DEWDCF921D2T

The DEWALT DCF921 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with hog ring for quick socket changes. A hole in the anvil enables the securing of sockets with a retaining pin/rubber O-ring, making it the ideal impact wrench for scaffolders. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Comes with a 1 Year Warranty.  Specifications: Bit Holder: 1/2in Hog Ring.No Load Speed: 2,500/min.Impact Rate: 3,600/bpm.Max. Fastening Torque: 406Nm.Nut Busting Torque: 610Nm.Weight: 1.1kg (without battery).

GBP 299.99
1

DeWalt DCF922N XR BL 1/2in Impact Wrench 18V Bare Unit DEWDCF922N

DeWalt DCF922N XR BL 1/2in Impact Wrench 18V Bare Unit DEWDCF922N

The DEWALT DCF921 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with hog ring for quick socket changes. A hole in the anvil enables the securing of sockets with a retaining pin/rubber O-ring, making it the ideal impact wrench for scaffolders. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Comes with a 1 Year Warranty.  Specifications: Bit Holder: 1/2in Hog Ring.No Load Speed: 2,500/min.Impact Rate: 3,600/bpm.Max. Fastening Torque: 406Nm.Nut Busting Torque: 610Nm.Weight: 1.1kg (without battery).

GBP 199.99
1

DeWalt DCF892N XR BL High Torque 1/2in Impact Wrench 18V Bare Unit DEWDCF892N

DeWalt DCF892N XR BL High Torque 1/2in Impact Wrench 18V Bare Unit DEWDCF892N

The DEWALT DCF892 XR Impact Wrench has an efficient brushless motor and 1/2in square drive plus detent pin allowing for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed. * Mode 2 Mid Speed tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed. * Mode 3 High Speed tool operates at normal speed, reverse tool operates at normal speed. * Mode 4 Precision Wrench tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification Bit Holder 1/2in Detent Pin No Load Speed 0-2,000/min. Impact Rate 0-3,250/bpm Max. Torque 812Nm Breakaway Torque 1152Nm Weight 1.6kg (without battery) The DEWALT DCF892N XR Brushless High Torque 1/2in Impact Wrench is supplied as a Bare Unit - No Battery or Charger.

GBP 229.99
1

DeWalt DCF921P2T XR BL 1/2in Impact Wrench 18V 2 x 5.0Ah Li-ion DEWDCF921P2T

DeWalt DCF921P2T XR BL 1/2in Impact Wrench 18V 2 x 5.0Ah Li-ion DEWDCF921P2T

The DEWALT DCF921 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with hog ring for quick socket changes. A hole in the anvil enables the securing of sockets with a retaining pin/rubber O-ring, making it the ideal impact wrench for scaffolders. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed. * Mode 2 Mid Speed tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed. * Mode 3 High Speed tool operates at normal speed, reverse tool operates at normal speed. * Mode 4 Precision Wrench tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Comes with a 1 Year Warranty. Specifications Bit Holder 1/2in Hog Ring. No Load Speed 2,500/min. Impact Rate 3,600/bpm. Max. Fastening Torque 406Nm. Nut Busting Torque 610Nm. Weight 1.1kg (without battery). The DEWALT DCF921P2T XR Brushless 1/2in Impact Wrench is supplied with 2 x 18V 5.0Ah Li-ion Batteries 1 x Charger 1 x TSTAK Kitbox

GBP 339.99
1

DeWalt DWH161N XR Universal Dust Extractor 18V Bare Unit DEWDWH161N

DeWalt DWH161N XR Universal Dust Extractor 18V Bare Unit DEWDWH161N

The DEWALT DWH161 XR Universal Dust Extractor has a high-quality, washable HEPA filter capable of achieving 99.5% efficiency to ensure a safe and clean working environment. Suitable for use with all SDS Plus rotary hammers and many other tools. It has a lightweight, compact design and is fitted with an adjustable, padded shoulder strap for easy transportation around the worksite. The extractor continues to operate for 2 seconds after the tool trigger is released to ensure any debris is completely removed from the hose (when paired with Wireless Tool Control). Wireless Tool Control compatible. This allows the extractor to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app. Bare Unit - No Battery or Charger supplied. Supplied with 1 x 1m Flexible Anti-Static Hose, 1 x Adjustable Shoulder Strap, 1x Stepped Hose Adaptor, 1x Crevice Tool and 1 x Belt Hook. Specification Max. Airflow 9.1 L/sec Tank Capacity 0.21 litre Hose Length 1m Hose Diameter 31mm Weight 1.7kg

GBP 199.99
1

DeWalt DCF620P2K Brushless Collated Drywall Screwdriver 18V 2 X 5.0AH Li-ion

DeWalt DCF620P2K Brushless Collated Drywall Screwdriver 18V 2 X 5.0AH Li-ion

The DEWALT DCF620N Drywall Screwdriver has a powerful brushless motor that drives screws efficiently and effectively, offering maximum run time and a compact tool. It has a lightweight compact design that allows you to work comfortably in small spaces. The Set and Forget feature remembers your fine depth adjustment setting when removing and replacing the nose cone and there is a trigger lock that lets you work without having to pull the trigger. It is fitted with an ergonomically designed rubber grip that gives excellent user comfort whilst using the tool in either the in-line or pistol-grip hand position. Other features include an LED work light and an angled belt hook which can be positioned for left or right handed users that fixes the tool strongly onto your tool belt/pouch. Specifications: Bit Holder: 6.35mm (1/4in).No Load Speed: 0-4,400/min.Max. Torque: 5-30Nm.Head Length: 220mm.Weight: 1.08kg.

GBP 299.99
1

DeWalt DCK2111L2T 12V XR Brushless Sub-compact Twin Pack DCD706 & DCF801 Includes 2 x 3AH Batteries, Multi-voltage Charger and TSTAK Kitbox

DeWalt DCK2111L2T 12V XR Brushless Sub-compact Twin Pack DCD706 & DCF801 Includes 2 x 3AH Batteries, Multi-voltage Charger and TSTAK Kitbox

DCD706 12V tools and batteries are 100% compatible with your existing 10.8V products Compact Length 168mm to allow access to tight spaces Bright LED light on tool foot for high visibility in low light situations State of charge battery pack allows users to quickly check battery level Efficient brushless motor gives 15% more runtime than previous generation Only 1kg (tool only) for ultimate portability and ease of use 15 position adjustable torque control for consistent screw driving into a variety of materials 25,500bpm hammer mechanism for efficient masonry drilling 10mm keyless chuck with automatic spindle lock for quick and easy bit change Includes belt hook DCF801 Compact Length, allowing you to get into even smaller spaces 3 electronic speeds allow for greater control when working on precise applications 'Drop and Load' bit holder for one-handed operation Efficient brushless motor delivers high performance, extends tool life and allows for a much shorter design Only 0.9kg (tool only) for ultimate portability Includes belt hook

GBP 299.99
1

DeWalt DCS334P2-GB 18V Brushless Top Handle Jigsaw, 2 X 5.0AH Slide Pack Batteries and Multi-voltage XR Charger in TSTAK Case

DeWalt DCS334P2-GB 18V Brushless Top Handle Jigsaw, 2 X 5.0AH Slide Pack Batteries and Multi-voltage XR Charger in TSTAK Case

Features and Benefits: Brushless motor provides improved runtime and durability. Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety. 4-position pendulum action controls the aggressiveness or smoothness of cuts. Tool free adjustable shoe with anti scratch cover bevels to 45 degrees in both directions. Speed Control - easy to reach thumb wheel speed control. Tool free blade release. Dust blower keeps the cut line visible.

GBP 359.99
1

DeWalt TSTAK 2.0 Tower DEW183412

DeWalt TSTAK 2.0 Tower DEW183412

The DEWALT TSTAK 2.0 Tower has been designed for convenient and easy access to tools. Made up of the following cases: 1 x TSTAK 2.0 Deep Toolbox has a removable, half-size, internal tote tray for easy access to key hand tools, fixings and power tool accessories. The lid is fitted with a high-performance seal that provides water and dust protection (IP54) to power and hand tools in the box. Other features include heavy-duty metal front latches and a padlock eye for increased security. 1 x TSTAK 2.0 Shallow Toolbox with front and top carry handles that allow the box to be carried in both orientations. The lid is fitted with a high-performance seal that provides water and dust protection (IP54) to power and hand tools in the box. Other features include a customisable foam insert that keeps power tools safe during transportation, heavy-duty metal front latches and a padlock eye for increased security. 1 x TSTAK Toolbox III (Deep Drawer) made from 3mm polypropylene plastic. It has a heavy-duty ball bearing sliding drawer and is supplied with 8 removable storage cups with lids for excellent organisation. Its bi-material handle ensures user comfort. 1 x TSTAK V Clear Lid Organiser with 2 large and 5 small removable storage cups. Ideal for storing small parts and accessories. Its unique heavy-duty lid design locks all compartments in place for secure storage. 1 x TSTAK Carrier Base. It can be fitted quickly and easily onto the base of any TSTAK unit to allow easier transportation of tools and accessories. With 360 swivel wheels and a locking brake for maximum manoeuvrability. Compact and lightweight design for easy storage when not in use. All can be stacked and clipped to other TSTAK toolboxes via durable, metal pin side latches. This allows numerous boxes to be stacked and held securely together for easier transport. DEWALT Tracker compatible, an internal fixing point allows the DEWALT Tracker (not supplied) to be installed and the boxes tracked via the DEWALT Tool Connect App. Total Load Capacity: 100kg

GBP 179.99
1

DeWalt DCG405FN-XJ 18V XR B/Less 125mm Flathead Angle Grinder Bare Unit

DeWalt DCG405FN-XJ 18V XR B/Less 125mm Flathead Angle Grinder Bare Unit

DCG405FN 18V XR Brushless 125mm Flathead Slide Angle Grinder - Naked Tool 18V Brushless Motor Improved performance in demanding applications Flat Gear head permits working within acute angles down to 43 Electronic Clutch Reduces the kick back reaction in the event of a pinch or stall Mesh Covers restricts dust being sucked through the motor Rubber Overmould provides enhanced grip and comfort Two Position Side Handle offers greater comfort and control Naked Tool - No Battery Included

GBP 179.99
1

DeWalt DCF620D2K Brushless Collated Drywall Screwdriver 18V 2 x 2.0AH Li-ion

DeWalt DCF620D2K Brushless Collated Drywall Screwdriver 18V 2 x 2.0AH Li-ion

The DEWALT DCF620D2K Brushless Collated Drywall Screwdriver is ideal for efficient fitting of drywall. It has a powerful BRUSHLESS motor that drives screws efficiently and effectively and which offers maximum runtime. This drywall screwdriver is one of the lightest and most compact tools on the market making it ideal for use in tight spaces. Its quick release collated screw magazine accepts most collated screws to allow the user to fit boards more quickly. The magazine rotates on the tool without removal to allow use in corners with minimum fuss. The DCF620D2K features tool free depth control and fine depth control for simple but effective setting. Its LED worklight offers valuable light when working in small spaces or areas with limited light. A trigger lock allows comfortable, prolonged work. The DCF620D2K has an ergonomically designed rubber grip for excellent user comfort whilst using the tool in either the 'in-line' or 'pistol-grip' hand position. It is also supplied with locking nose cone, allowing work with the same tool on sites where collated drywall screws are not supplied. The 'Set and forget' feature remembers your fine depth adjustment setting when removing and replacing the nose cone. Supplied with: 2 x 18 Volt 2.0Ah XR Li-Ion Batteries, 1 x Multi-Voltage XR Charger, 1 x DCF6201 Collated Screw Magazine, 1 x DT7205-QZ PR2 Collated Screw Bit, 1 x Single Screw Nose Cone, 1 x DT7520-QZ Magnetic Bit Extender with 25mm PR2 Screw Bit and 1 x TSTAK 2 Kitbox. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-4,400/min.Torque: 5-30Nm.Collated Head Capacity: 55mm.Weight: 1.88kg.

GBP 269.99
2

DeWalt DCF620N-KIT 18V Brushless Drywall Collated Screwdriver (Body Only)

DeWalt DCF620N-KIT 18V Brushless Drywall Collated Screwdriver (Body Only)

Dewalt DCF620N-KIT 18V Brushless Drywall Collated Screwdriver (Body Only) The Dewalt DCF620N-KIT Drywall Collated Screw Gun is a must-have tool for the efficient fitting of drywall. Its fully brushless 4400rpm motor drives screws effortlessly for maximum run time and increased productivity. This Dewalt 18V Screw Gun is one of the lightest and most compact tools on the market, allowing for use in tight, hard-to-reach areas as well as overhead. This kit comes complete with the collation mechanism attached and with its brushless motor will give approximately 700 screws per charge. The magazine is designed for 25- 55mm (1"- 2") screw lengths. This DCF620 Drywall Collated Screw Gun comes with the DCF6202 Collated Drywall Screw Gun Attachment. Sold without batteries or charger in a TSTAK 2 Kitbox. Features: Trigger lock-on lets you work without having to pull the trigger The robust and durable design means that the tool is job site tough Tool-free depth control and fine depth control for simple but effective setting Easy collated screw magazine opening to allow for quick cleaning of drywall dust LED work light offers valuable light when working in small spaces or areas with limited light Angled belt hook can be positioned for left or right-handed users and fixes tool strongly onto tool belt/pouch Quick-release collated screw magazine accepts most collated screws to allow the user to fit boards more quickly "Set and forget" feature remembers your fine depth adjustment setting when removing and replacing the nose cone Collated screw magazine rotates on the tool without removal to allow the operate in corners with the minimum of fuss Powerful 4400rpm brushless motor drives screws efficiently and effectively offering maximum runtime and a compact tool One of the lightest and most compact tools on the market - it ensures that you can work comfortably and get into small spaces Also supplied with locking nose cone so that you can work with the same tool on sites where collated drywall screws are not supplied The ergonomically designed rubber grip gives you excellent user comfort whilst using the tool in either the "in-line" or "pistol-grip" hand position Comes with: Belt hook TSTAK 2 Kitbox Single Screw Nose cone DCF6202 collated screw magazine DT7205-QZ PR2 collated screw bit DT7520-QZ Magnetic bit extender with 25mm PR2 screw bit Specification: Height: 233mm Length: 380mm Weight: 1.88 kg Head Length: 335mm Sound Power: 88 dB (A) Max Torque: 5 - 30 Nm Power Output: 435 Watt Sound Pressure: 77 dB (A) Tool Holder (Hex) : 6.35mm No Load Speed: 0 - 4400 rpm Sound Power Uncertainty: 3 dB (A) Sound Pressure Uncertainty: 3 dB (A) (Hand/Arm Vibration) Uncertainty K 1: 1.5 m/s_

GBP 229.99
1