Pricemate

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8The XP95 Open-Area Visual Alarm Devices VADs have been developed as primary or supplementary alarm devices. The loop powered VAD may be used in situations where there is a risk that sounders will not be heard. It might also be required where deaf or hearing impaired persons may be present.Key FeaturesHigh intensity red LEDsEN 54-23 compliant Category C VADCoverage C-3-8Flash Rate 0.5 HzFault signal if LED checked

GBP 45.24

1

Apollo XPA-CB-14023-APO XPander Multisensor Detector with Sounder VID Base Red Flash

Apollo XPA-CB-14023-APO XPander Multisensor Detector with Sounder VID Base Red FlashXPander sounders are ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 4 tone pairs including the Apollo tone and a self-test which causes a fault signal to be sent if the sounders fail to operate.The address of a sounder or a combined soundervisual indicator is set at the commissioning stage by means of a DIL switch. The sounder address is plus one of the address set.The sounders and combined soundervisual indicators are powered by two packs of batteries one with three AA and one with three C size alkaline batteries which provide a working life of typically 3-5 years.The five-year life includes weekly tests and a half-hour sounding in a fire condition. The Combined Sounders and Sounder Visual Indicators incorporate audible and visual alarm indicators within one unit.

GBP 363.00

1

Apollo XPA-CB-14019-APO XPander Multisensor Detector with Sounder Base

Apollo XPA-CB-14019-APO XPander Multisensor Detector with Sounder BaseXPander sounders are ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 4 tone pairs including the Apollo tone and a self-test which causes a fault signal to be sent if the sounders fail to operate.The address of a sounder or a combined soundervisual indicator is set at the commissioning stage by means of a DIL switch.The sounder address is plus one of the address set. The sounders and combined soundervisual indicators are powered by two packs of batteries one with three AA and one with three C size alkaline batteries which provide a working life of typically 3-5 years.The five-year life includes weekly tests and a half-hour sounding in a fire condition. The Combined Sounders and Sounder Visual Indicators incorporate audible and visual alarm indicators within one unit.

GBP 327.13

1

Apollo XPA-CB-14027-APO XPander Multisensor Detector with Sounder VID Base White Flash

Apollo XPA-CB-14027-APO XPander Multisensor Detector with Sounder VID Base White FlashXPander sounders are ceiling mounted and use a bi-directional monitored radio platform to communicate.They feature 4 tone pairs including the Apollo tone and a self-test which causes a fault signal to be sent if the sounders fail to operate. The address of a sounder or a combined soundervisual indicator is set at the commissioning stage by means of a DIL switch.The sounder address is plus one of the address set. The sounders and combined soundervisual indicators are powered by two packs of batteries one with three AA and one with three C size alkaline batteries which provide a working life of typically 3-5 years.The five-year life includes weekly tests and a half-hour sounding in a fire condition. The Combined Sounders and Sounder Visual Indicators incorporate audible and visual alarm indicators within one unit.

GBP 363.00

1

Apollo 29600-803 Sonos Pulse Ceiling VAD Shallow Base White BodyRed Flash C-3-8.9

Apollo 29600-803Sonos Pulse Ceiling VAD Shallow Base White BodyRed Flash C-3-8.9Sonos Pulse conventional ceiling mounted Visual Alarm Devices are available with a white and red flash colour. The white flash variant has an EN 54-23 approved coverage pattern of C-3-15 whereas the red flash variant has a coverage pattern of C-3-8.9.Key FeaturesEN 54-23 approvedFlash Colour Red or WhiteSynchronised FlashIP21 shallow base

GBP 70.76

1

Apollo 29600-802 Sonos Pulse Ceiling VAD Shallow Base White BodyWhite Flash C-3-15

Apollo 29600-802 Sonos Pulse Ceiling VAD Shallow Base White BodyWhite Flash C-3-15Sonos Pulse conventional ceiling mounted Visual Alarm Devices are available with a white and red flash colour. The white flash variant has an EN 54-23 approved coverage pattern of C-3-15 whereas the red flash variant has a coverage pattern of C-3-8.9.Key FeaturesEN 54-23 approvedFlash Colour Red or WhiteSynchronised FlashIP21 shallow base

GBP 84.50

1

Apollo Xpander Diversity Loop Interface Unit - XPA-IN-14050-APO

Please note The XPA-IN-14050-APO does not support CoreProtocol installations.Apollo Xpander Diversity Loop Interface Unit - XPA-IN-14050-APOThe XPander Diversity Loop Interface Unit can monitor up to 31 XPander devices and report each devices status to an intelligent fire control panel.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesConnects up to 31 XPander devices to an ApolloAddressable loopTranslates radio signals from XPander detectors to the fire control panelBuilt-in loop isolatorLoop-poweredDiversity aerial design for improved signal integrityThe entire XPander product line has a temporary four-month supply disruption starting from November 2021 with supply expecting to resume in February 2022.

GBP 337.68

1

Apollo RW1300-211APO Reach Sounder VAD Base Red Flash C-3-10

Apollo RW1300-211APO Reach Sounder VAD Base Red Flash C-3-10The RW1300-211APO is a wireless analogue addressable sounder VAD bases that can be used as a stand-alone notification device with a blanking cap or as a combined solution with a REACH Wireless detector.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key Features16 tone pairsFour Volume SettingsBi-directional wireless communicationDual channel redundancyFive year battery lifeFive year product warranty

GBP 260.92

1

Apollo RW1300-210APO Reach Sounder VAD Base White Flash C-3-15

Apollo RW1300-210APO Reach Sounder VAD Base White Flash C-3-15The RW1300-210APO is a wireless analogue addressable sounder VAD bases that can be used as a stand-alone notification device with a blanking cap or as a combined solution with a REACH Wireless detector.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesCompatible only with REACH Wireless16 tone pairsFour Volume SettingsBi-directional wireless communicationDual channel redundancyFive year battery lifeFive year product warranty

GBP 260.92

1

Apollo Marine DIN-Rail Sounder Controller 8 Amperes 55000-181MAR

Apollo Marine DIN-Rail Sounder Controller 8 Amperes 55000-181MARThe Marine DIN-Rail Sounder Controller 8 Amperes is used to control the operation of a zone of externally powered sounders and report their status to the fire control panel.The device is loop powered and controlled by the fire control panel using the output bits in the communication protocol. The unit is polarity sensitive. This unit needs to be installed in a suitable enclosure Part No. 29600-239240 or equivalent and secured using the end stops.Key FeaturesEnables sounders to be operated continuously or to be pulsed one second on one second offMay be synchronised when in pulsed operationExternal supply monitoringWill accept a load of 8 Amperes

GBP 119.31

1

Apollo XPander Remote Indicator Module - XPA-IN-14102-APO

Apollo XPander Remote Indicator Module - XPA-IN-14102-APODesigned and manufactured using the latest techniques and surface-mount technology to ensure component count is kept to a minimum whilst maximising reliability the XPander Remote Indicator Module is used to indicate the activation of an individual device or zone.Brand InformationThe device is powered by a low-voltage dual supply alkaline battery pack which has been tested to provide a five-year life at normal conditions 15C to 35C the condition of which is continually monitored. The system indicates the remaining battery capacity with a low battery condition being indicated as a fault allowing 30 days for the battery pack to be changed before unit failure occurs.An additional warning is also given seven days before unit failure occurs. Removal of the remote indicator from the fixing plate will indicate a fault condition. The device is fully compliant with EN 54-25 and incorporates a locking screw to prevent unauthorised removal.

GBP 209.51

1

Apollo XPander Single Input Output Channel Unit - XPA-IN-14011-APO

Apollo XPander Single Input Output Channel Unit - XPA-IN-14011-APOThe XPander InputOutput Unit is a radio based interface and offers two monitored input circuits and two relay outputs. It can be used for controlling fire doors fire dampers smoke vents and other fire engineering applications.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key Features WirelessMonitored switch circuitVoltage-free contactsCapable of switching up to 30V at 1AFiveyear battery life using standard AA alkaline batteries

GBP 198.37

1

Apollo XPander Dual Input Output Channel Unit - XPA-IN-14012-APO

Apollo XPander Dual Input Output Channel Unit - XPA-IN-14012-APOThe XPander InputOutput Unit is a radio based interface and offers two monitored input circuits and two relay outputs. It can be used for controlling fire doors fire dampers smoke vents and other fire engineering applications.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesWirelessMonitored switch circuitVoltage-free contacts Capable of switching up to 30V at 1AFive-year battery life using standard AA alkaline batteries

GBP 237.64

1

Apollo Orbis Multi-sensor Detector with Flashing LED ORB-OH-13003-APO

Apollo Orbis Multi-sensor Detector with Flashing LED ORB-OH-13003-APOOrbis multi-sensor smoke detectors are recognized as good detectors for general use but are additionally more sensitive to fast burning flaming firesincluding liquid firesthan optical detectors. They can be readily used instead of optical smoke detectors but should be used as the detector of choice for areas where the fire risk is likely to include heat at an early stage in the development of the fire.As with Orbis optical smoke detectors the increased reliability of detection is combined with high immunity to false alarms.OperationThe multi-sensor smoke detector has two sensors one for smoke one for heat and the alarm decision is derived from either sensor or a combination of both. The multi-sensor is a development of the Orbis optical detector described in the previous chapter and goes further in its capabilities of fire detection.The optical sensor is identical to the one in the Orbis optical detector. Its sensitivity is however influenced by a heat sensing element which makes the detector more responsive to fast-burning flaming fires.Key FeaturesResponds well to fast-burning flaming firesTransient rejection algorithms reduce false alarmsAutomatic drift compensation with DirtAlert a yellow flashing LED to easily identify dirty detectorsRed flashing LED at StartUp confirms that the device is operating. SensAlert yellow flashing LED indicates faulty operationFasTest takes just 4 seconds to test and confirm detectors are functioning correctlyDustDefy system prevents dust ingress while maintaining airflow

GBP 23.71

1

Apollo Orbis Marine Multisensor Detector ORB-OH-43001-MAR

Apollo Orbis Marine Multisensor Detector ORB-OH-43001-MARThe Orbis Marine Multisensor Detector benefits from the same false alarm reduction technology as the optical detector with the addition of a heat sensing element.OperationMulti-sensor Smoke Detectors are recognized as good detectors for general use but are additionally more sensitive to fast burning flaming fires including liquid fires than optical detectors.They can be readily used instead of optical smoke detectors but should be used as the detector of choice for areas where the fire risk is likely to include heat at an early stage in the development of the fire. As with Orbis Marine optical smoke detectors the increased reliability of detection is combined with high immunity to false alarms.The Obis Marine multi-sensor smoke detector has two sensors one for smoke one for heat and the alarm decision is derived from either sensor or a combination of both. The multi-sensor is a development of the Orbis Marine optical detector described in the previous chapter and goes further in its capabilities of fire detection.The optical sensor is identical to the one in the Orbis optical detector. Its sensitivity is however influenced by a heat sensing element which makes the detector more responsive to fast-burning flaming fires.Key FeaturesResponds well to fast burning flaming firesReduced false alarmsIncreased reliability of detectionSensing chamber keeps out dust and other airborne contaminantsOperates over a broad range of voltages at extremes of temperature

GBP 34.07

1

Apollo Orbis Marine Multi-Sensor Detector with Flashing LED ORB-OH-43003-MAR

Apollo Orbis Marine Multi-Sensor Detector with Flashing LED ORB-OH-43003-MARThe Orbis Marine Multisensor Detector benefits from the same false alarm reduction technology as the optical detector with the addition of a heat sensing element.OperationMultisensor Smoke Detectors are recognized as good detectors for general use but are additionally more sensitive to fast burning flaming fires including liquid fires than optical detectors. They can be readily used instead of optical smoke detectors but should be used as the detector of choice for areas where the fire risk is likely to include heat at an early stage in the development of the fire. As with Orbis Marine optical smoke detectors the increased reliability of detection is combined with high immunity to false alarms.The Obis Marine multisensor smoke detector has two sensors one for smoke one for heat and the alarm decision is derived from either sensor or a combination of both. The multisensor is a development of the Orbis Marine optical detector described in the previous chapter and goes further in its capabilities of fire detection. The optical sensor is identical to the one in the Orbis optical detector. Its sensitivity is however influenced by a heat sensing element which makes the detector more responsive to fast-burning flaming fires.Key FeaturesResponds well to fast burning flaming firesReduced false alarms Increased reliability of detectionSensing chamber keeps out dust and other airborne contaminantsOperates over a broad range of voltages at extremes of temperatureFlashing LED option

GBP 34.07

1

Apollo SA4700-104APO Intelligent Twin Input Output Unit

Apollo SA4700-104APO Intelligent Twin Input Output UnitThe Intelligent Twin InputOutput Unit provides the functionof two InputOutput Units within one enclosure. The twounits are electrically independent of each other. There is a DILswitch on each unit to set the address.Both inputoutput units in the enclosure provide supervisionof one or more normally open volt free contacts connectedto a single pair of cables and a set of changeover relay outputcontacts. Compatible with XP95 Discovery and CoreProtocol digital communication protocols.Mechanical ConstructionThe Intelligent Twin InputOutput Unit is available in the new faceplate style enclosure. This can be mounted with the supplied backbox for surface mounting or flush mounted using a UK double gang flush mounting back-box of minimum depth 30mm.Key FeaturesImproved design for ease of wiring meaning faster installationContains controllable isolatorAddress range 1 - 254Nine pre-configured modes including compatibility mode from XP95Discovery to CoreProtocol systemsFailsafe mode meets BS 7273-4 requirementsConfigurable input stylesEarth fault monitoring

GBP 77.62

1

Apollo SA6700-100APO Intelligent Twin Switch Monitor

Apollo SA6700-100APO Intelligent Twin Switch MonitorThe Intelligent Twin Switch Monitor provides the functionof two Switch Monitor units within one enclosure. The two units are electrically independent of each other. There is a DILswitch on each unit to set the address.Both Switch Monitor units in the enclosure are designed tomonitor the state of one or more single pole volt-free contactsconnected on a single pair of cables to report the status. Ithas a selectable status reporting delay making it suitable formonitoring flow switches. Compatible with XP95 Discovery and CoreProtocol digital communication protocols.ConstructionThe Intelligent Twin Switch Monitor is available in the new faceplate style enclosure. This can be mounted with the supplied back-box for surface mounting or flush mounted using a UK double gang flush mounting back-box of minimum depth 30mm.Key FeaturesImproved design for ease of wiring meaning faster installationContains controllable isolatorAddress range 1 - 254Five pre-configured modes including compatibility mode from XP95Discovery to CoreProtocol systemsPriority mode for first responseConfigurable input stylesEarth fault monitoring

GBP 65.76

1

Apollo Backplate 45681-233APO

Apollo Backplate 45681-233APOThe Back plate provides a high degree of protection against the ingress of water or dust into the back of the detector mounted directly onto a mounting box.When the back plate is used with either a Discovery or an XP95 device the number tab of the XPERT card must be snapped off and placed in one of the knockout slots provided in the back plate.Key Features Protects against dust and dirt ingressImproved performanceFits Discovery XP95 Orbis Series 65 and AlarmSense bases

GBP 2.70

1

Apollo XP95 Intrinsically Safe Red Manual Call Point MEDC Style 55000-961APO

Please note This product is currently on an extended lead time please contact us before placing your order.Apollo XP95 Intrinsically Safe Red Manual Call Point MEDC Style 55000-961APOXP95 IS Manual Call Point - MEDC Style for heavy-duty applications a robust manual call point based on a model by MEDC is available. This model is made of glass-reinforced polyester and may be ordered as a break-glass or push-button call point and in a variety of colours.Break-glass models may be supplied with or without a stainless-steel protective flap. MEDC-based break-glass units have two M20 cable entries on the bottom face of the back box. Push-button units have one M20 cable entry on the bottom face and one on the top face. Other cable entry configurations can be provided to special order.OperationXP95 IS manual call points have the same operating characteristics as the standard versions. They are available in two types of housing and in a number of versions. The standard call point is based on the KAC waterproof model and is a red break-glass call point part no 55000-940. This model is also available in other colours and a protective lift-up flap is available.Key FeaturesRobust designWaterproofReports an alarm in under 0.2 seconds

GBP 844.88

1

Apollo XP95 Zone Monitor Unit with Isolator 55000-845APO

Apollo XP95 Zone Monitor Unit with Isolator 55000-845APOThe Zone Monitor powers and controls the operation of a zone of up to 20 Apollo Series 65 or Orbis Fire Detectors from a Discovery or XP95 loop. The Zone Monitor with Isolator is loop powered and operates at 1728V DC with protocol pulses of 59V.The Zone Monitor with Isolator is supplied with a backbox for surface mounting and is for indoor use only. Two LEDs one red and one yellow are visible through the front cover of the enclosure. The red LED is illuminated to indicate that a fire alarm condition has been detected on the zone wiring. The yellow LED is illuminated whenever the built-in isolator has sensed a short circuit loop fault. The backbox is a polycarbonate moulding.Key Featuresfitted with a bi-directional short circuit isolatorunaffected by loop short circuits

GBP 58.91

1

Apollo Series 65 Standard Base - 45681-200APO

Apollo Series 65 Standard Base - 45681-200The Series 65 Standard Base has been designed to enable detectors to be fitted without the need of force - particularly useful when fitting to suspended ceilings. All Series 65 bases have a one way only fit. Detectors can be locked into place by a grub screw using a 1.5mm hexagonal screwdriver.OperationAll detectors in the Series 65 range fit into Series 60 standard mounting bases. The bases are of 100mm diameter and have five terminals marked according to their function Line 1 in line 1 out line 2 in and out remote indicator negative earth. Detectors are polarity insensitive so that identification of positive and negative lines is only required if a remote LED is fitted. An earth connection is not required for either safety or correct operation of detectors.The earth terminal is provided for tidy termination of earthed conductors or cable screens and to maintain earth continuity where necessary. Bases have a wide interior diameter for ease of access to cables and terminals and there are two slots for fixing screws at a spacing of 51 to 69mm. Detectors fit into bases one way only and require clockwise rotation without push force to be plugged in.Key Features Detector locking mechanismOne way fitEasy to wireContains an earth connectorContains no electrical partsTerminal for remote indicator

GBP 2.51

1

Apollo Series 65 Marine Mounting Base 45681-200MAR

Apollo Series 65 Marine Mounting Base 45681-200MARThe Base has been designed to enable detectors to be fitted without the need of force - particularly useful when fitting to suspended ceilings. All Series 65 bases have a one way only fit. Detectors can be locked into place by a grub screw using a 1.5mm hexagonal screwdriver.OperationThe bases are of 100mm diameter and have five terminals marked according to their function Line 1 in line 1 out line 2 in and out remote indicator negative earth. Detectors are polarity insensitive so that identification of positive and negative lines is only required if a remote LED is fitted. An earth connection is not required for either safety or correct operation of detectors.The earth terminal is provided for tidy termination of earthed conductors or cable screens and to maintain earth continuity where necessary. Bases have a wide interior diameter for ease of access to cables and terminals and there are two slots for fixing screws at a spacing of 51 to 69mm. Detectors fit into bases one way only and require clockwise rotation without push force to be plugged in.Key FeaturesDetector locking mechanismOne way fitEasy to wireContains an earth connectorContains no electrical partsTerminal for remote indicator

GBP 3.86

1

Apollo Marine Mini Switch Monitor 55000-775MAR

Apollo Marine Mini Switch Monitor 55000-775MARThe Marine Mini Switch Monitor is a miniature interface with an entirely new housing. The unit is designed to fit into equipment with limited space or mounted within an enclosure such as a manual call point. The interface can also be fitted onto a standard 35mm DIN-Rail using a twist-click motion. The unit is designed to monitor the state of one or more single pole volt-free contacts and reports the contact status to Apollo compatible control panels.OperationThe Marine mini switch monitor features a 20i shortcircuit isolator as standard and can be used as an interrupt or non-interrupt device. The interrupt feature selected via. the DIL Switch means the unit can be used where a priority response is required in particular for monitoring an individual or a zone of conventional manual call points.Please note When the eighth section of the DIL switch is changed the mini switch monitor will change the type code it sends to the panel. The panel will have to be programmed to accept this change.Key FeaturesDesigned for use where space is limitedIsolated as standardInterruptnon interrupt in one unitPre-alarm status availableThree coloured LEDs giving clear status indication

GBP 61.01

1

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red Flash

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red FlashThe Conventional Open-Area Wall Sounder VAD is used to provide audible and visual warning of a fire. Combining an EN 54-3 compliant sounder with an EN 54-23 compliant VAD enables this device to be used in areas that require the use of both an audible and a visual alarm.Key FeaturesFor use outdoorsRed body with red flashConventional

GBP 176.29

1

Brand

Merchant

Price (EUR)