Pricemate

Apollo XP95 Integrated Base Sounder with Isolator 45681-277APO

Apollo XP95 Integrated Base Sounder with Isolator 45681-277APOThe Integrated Base Sounder comprises of a base sounder with integral mounting base and is for use with Discovery or XP95 ranges. It is designed for indoor use. The base sounder is line powered and needs no external power supply. It operates at 1728V DC and is polarity-sensitive.The integrated base sounder is moulded in polycarbonate and has stainless steel contacts that accept solid or stranded cables of up to 2.5mm. The Base Sounder comprises of a base sounder with integral mounting base and is for use with Discovery or XP95 ranges. It is designed for indoor use.Key Features Two tonesTwo volume ranges 55-75dBA and 75-91dBAIndividual and group addressingUnique acoustic self-testBuilt-in isolator

GBP 35.35

1

Apollo XP95 Sounder Beacon Base - 45681-331APO

Apollo XP95 Sounder Beacon Base - 45681-331APOThe Sounder Beacon Base are loop powered so needs no external power supply. It operates at 1728V DC and is polarity-sensitive. The Sounder Beacon Base are moulded in polycarbonate and has stainless steel contacts that accept solid or stranded cables of up to 2.5mm.The Sounder Beacon Bases will operate only with control equipment using the Apollo XP95 or Discovery protocol. The features of the Sounder Beacon Base are available only when it is connected to a control panel with the appropriate software.Key FeaturesTwo volume ranges 55-75dBA and 75-91dBAVisual indicator flash rate of once per secondSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and visual indicator self-test

GBP 58.67

1

Apollo Integrated Base Sounder without Isolator 45681-278APO

Apollo Integrated Base Sounder without Isolator 45681-278APOThe Integrated Base Sounder comprises of a base sounder with integral mounting base and is for use with Discovery or XP95 ranges. It is designed for indoor use.The integrated base sounder responds to its own individual address set with a DIL switch. It also responds both to a group address set by means of a 4-segment DIL switch and to a pulsed-mode synchronisation address which is embedded in the unit.The sounder will operate only with control equipment using the Apollo XP95 or Discovery protocol. The features of the Integrated base sounder are available only when the sounder is connected to a control panel with the appropriate software.Key FeaturesTwo tonesTwo volume ranges 55-75dBA and 75-91dBAIndividual and group addressingUnique acoustic self-test

GBP 35.29

1

Apollo XP95 Heat Detector High Temperature 55000-401APO

Apollo XP95 Heat Detector High Temperature 55000-401APOThe XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The XP95 range features two heat detectors standard and high temperature. The standard heat detector is classified as an A2S device and will report an alarm at 55C. The high temperature detector classified as a CS device will report an alarm at 90C.OperationThe XP95 heat detectors have a low air flow resistance case made of self-extinguishing white polycarbonate. The devices monitor heat by using a single thermistor network which provides a voltage output proportional to the external air temperature. The standard heat detectors 55000-400 and 55000-420 respond to increasing air temperature in such a way that they are classified as an A2S device. Both devices will give 55 counts at 55C. A high temperature CS heat detector 55000-401 which can be installed in a typical ambient temperature of 55C is available. This device will give 55 counts at 90C.ApplicationThe choice of detector from the XP95 range follows the well-established principles of system design. That is the optimum detector type will depend on the type of fire risk and fire load and the type of environment in which the detector is sited. For general use smoke detectors are recommended since these give the highest level of protection. Smoke detectors from the XP95 range may be optical or multisensor types. It is generally accepted that ionisation types have a high sensitivity to flaming fires whereas optical detectors have high sensitivity to smouldering fires.Key FeaturesIdeal in environments that are dirty or smoky under natural conditionsWell suited for warehouses loading bays and car-parksUnaffected by wind or atmospheric pressure

GBP 32.66

1

Apollo XP95 Heat Detector Standard Temperature 55000-400APO

Apollo XP95 Heat Detector Standard Temperature 55000-400APOThe XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The XP95 range features two heat detectors standard and high temperature. The standard heat detector is classified as an A2S device and will report an alarm at 55C. The high temperature detector classified as a CS device will report an alarm at 90C.Brand InformationThe XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements. As it operates using digital communication XP95 has a high immunity from corruption and is therefore often preferred in a large system where life safety is critical. XP95 products are frequently used in commercial industrial financial government ITtelecoms and healthcare applications.OperationThe XP95 heat detectors have a low air flow resistance case made of self-extinguishing white polycarbonate. The devices monitor heat by using a single thermistor network which provides a voltage output proportional to the external air temperature.The standard heat detectors 55000-400 and 55000-420 respond to increasing air temperature in such a way that they are classified as an A2S device. Both devices will give 55 counts at 55C. A high temperature CS heat detector 55000-401 which can be installed in a typical ambient temperature of 55C is available. This device will give 55 counts at 90C.Key FeaturesIdeal in environments that are dirty or smoky under normal conditionsWell-suited to warehouses loading bays and car parksUnaffected by wind or atmospheric pressureOther part codes include AD-2002

GBP 32.66

1

Apollo 45681-330APO Intelligent Sounder Visual Indicator Base with Isolator

Apollo 45681-330APO Intelligent Sounder Visual Indicator Base with IsolatorThe low volume range is useful in areas such as hospitals where a fire alert is initially intended to warn staff only. The sounder is set to the high range for general use. Synchronisation of tones ensures the integrity of the signaltones from different sounders do not merge into one signal that could be mistaken for a different tone. Group addressing is a simple method of alerting an entire area or group of rooms without delay.For systems requiring isolators at every point the built-in isolator saves installation time and cost. The acoustic self-test means that the sounder listens to itself when it is switched on. If no sound is detected a fault signal is transmitted when the sounder is polled.The beacon self-test is achieved by means of an LED monitoring circuit. If the LEDs do not draw current when the sounder beacon base has been switched on a fault signal is transmitted when the device is next polled.Key FeaturesTwo volume ranges 55-75dBA and 75-91dBAVisual indicator flash rate of once per secondSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and visual indicator self-testBuilt-in Isolator

GBP 58.67

1

Apollo Integrated Base Sounder - Slow Whoop with Isolator 45681-290APO

Apollo Integrated Base Sounder - Slow Whoop with Isolator 45681-290APOThe Integrated Base Sounder is made up of a base sounder with integral mounting base. It is designed for indoor use.Key FeaturesTwo tonesTwo volume ranges 55-75dBA and 75-91dBAIndividual and group addressingUnique acoustic self-testBuilt-in isolatorDevice AddressingThe integrated base sounder responds to its own individual address set with a DIL switch. It also responds both to a group address set by means of a 4-segment DIL switch and to a pulsed-mode synchronisation address which is embedded in the unit. GROUP ADDRESSING It may be desirable in alarm conditions to switch more than one integrated base sounder simultaneously. To enable this sounders may be controlled as a group and given a group address which is common to all sounders in the group. When a device recognises its group address it will process the forward command bits but it will not return any data to the control panel on that ad dress. If it is required to confirm the status of the outputs of devices under group address control it is necessary to interrogate all devices in the group at their individual addresses.CommunicationXP95 Discovery and CoreProtocol compatibleBackward CompatibilityThe features of the Integrated base sounder are available only when the sounder is connected to a control panel with the appropriate software.

GBP 37.24

1

Apollo 45681-300APO Integrated Base Sounder - DIN-Tone with Isolator

Apollo 45681-300APO Integrated Base Sounder - DIN-Tone with IsolatorThe Integrated Base Sounder comprises of a base sounder with integral mounting base and is for use with Discovery or XP95 ranges. It is designed for indoor use.Electrical DescriptionThe integrated base sounder is line powered and needs no external power supply. It operates at 1728V DC and is polarity-sensitive.Mechanical ConstructionThe integrated base sounder is moulded in polycarbonate and has stainless steel contacts that accept solid or stranded cables of up to 2.5mm.Device AddressingADDRESSING The integrated base sounder responds to its own individual address set with a DIL switch. It also responds both to a group address set by means of a 4-segment DIL switch and to a pulsed-mode synchronisation address which is embedded in the unit. GROUP ADDRESSING It may be desirable in alarm conditions to switch more than one integrated base sounder simultaneously. To enable this sounders may be controlled as a group and given a group address which is common to all sounders in the group. When a device recognises its group address it will process the forward command bits but it will not return any data to the control panel on that ad dress. If it is required to confirm the status of the outputs of devices under group address control it is necessary to interrogate all devices in the group at their individual addresses.CommunicationXP95 Discovery and CoreProtocol compatibleKey FeaturesTwo tonesTwo volume ranges 55-75dBA and 75-91dBAIndividual and group addressingUnique acoustic self-testBuilt-in isolator

GBP 37.24

1

Brand

Merchant

Price (EUR)