Pricemate

Proiector led briteqbt-akkulite ip

Beam angle 22 Projection angle can be adjusted over 25 (vertical to horizontal) + -10hrs use in fading mode on a fully charged battery! Each projector is equipped with a wireless transceiver module (transmitter and receiver) which is 100% compatible with the W-DMX G4-protocol from Wireless Solution Sweden . Projector can still be used with empty battery: just connect it to the mains! Very smooth RGBWA color changes thanks to high freq. dimming electronics The internal battery charger charges the battery while the projector is working on mains power. Different working modes: Standalone: custom colors selectable or automatic and beat synchronized color changes Master slave mode: wonderful preprogrammed, music synchronized lightshows. DMX-controlled : cabled and wireless. (5 modes : 4-5-9-10 channels, LEDCON-02 Mk2) Controlled by a small JB Systems LEDCON-02 Mk2 or LEDCON-XL controller Controlled by wireless IR remote control Weatherproof IP-Power (Seetronic) mains input Weatherproof 3-pin XLR input and output connectors NOTE: this product has IP65 rating while used for non-permanent outdoor installation and under normal conditions (not exposed to seawater). General : Dimensions (cm) 18 x 15 x 19,8 cm General : Weight (kg) 4.5 General : Powerinput AC 100 - 240V, 50 60Hz General : Energy Label No General : Power consumption W 60 General : Color black General : Display LCD General : IP rating outdoor Control : manual Yes Control : Master Slave Yes Control : SMART-DMX No Control : Standalone automatic, sound, fixed Control : Type included remote IR Remote Control : programmable No Control : upgradable software No Control : maximum DMX channels 10 Light : lamp socket none Light : lamp LED Light : colors Red, Green, Blue, White, Amber, RGB, RGBW, RGBWA Light : mix colors Yes Light : min. refresh rate (kHz) No Light : max. refresh rate (kHz) No Connections : input 3 pin XLR, ip-power (Seetronic), wifi, wireless DMX Connections : output 3 pin XLR, ip-power (Seetronic), wifi

RON 3533.00

1

Proiector led briteq bt-coloray 60r

This stylish 60W RGBW single beam projector is equipped with a 15 lens making it a very powerful tool for all kinds of events (stage, TV-show, exhibition boots, architectural lighting, ) IP65 rating Three different DMX-modes: 4, 6 and 7 channels. RDM-functionality for easy remote setup: DMX addressing, channel mode, The LCD-display assures easy navigation in the different setup menus. TV-Studio ready: flicker free 1200Hz LED refresh rate. Selectable lamp behavior: halogen lamp (slow) or led (fast) Four dimmer curves: linear, square, inverse square, S-curve In case of DMX failure you can choose between blackout and freeze mode. Lock function to avoid unwanted altering of the settings. White balance adjustment to perfectly match the colors of several projectors. Default factory settings + user settings can be saved loaded. 5pin DMX in outputs and Neutrik TRUE1 PowerCON in outputs for easy daisy chaining. Fan cooling for longer LED life. NOTE: this product has IP65 rating while used for non-permanent outdoor installation and under normal conditions (not exposed to seawater). General : Application Architectural, Stage Rental, Theatre General : Dimensions (cm) 24 x 27 x 30 General : Weight (kg) 5.43 General : Powerinput AC 100 - 240V, 50 60Hz General : Energy Label No General : Power consumption W 70 General : Color black General : Display touchscreen General : Fixation optional omega bracket General : IP rating outdoor Control : manual Yes Control : Master Slave Yes Control : SMART-DMX No Control : Standalone automatic, fixed Control : programmable No Control : upgradable software Yes Control : maximum DMX channels 7 Light : lamp socket No Light : lamp LED Light : colors RGB, RGBW Light : mix colors Yes Light : min. beam angle ( ) 15 Light : max. beam angle ( ) 15 Light : min. refresh rate (kHz) No Light : max. refresh rate (kHz) No Connections : input 5 pin XLR, PowerCon TRUE1 Connections : output 5 pin XLR, PowerCon TRUE1 Brand BRITEQ EANCode 5420025655101

RON 3092.00

1

Proiector led briteq bt-coloray 120r

This stylish 120W RGBW single beam projector is equipped with a 15 lens making it a very powerful tool for all kinds of events (stage, TV-show, exhibition boots, architectural lighting, ) IP65 rating Three different DMX-modes: 4, 6 and 7 channels. RDM-functionality for easy remote setup: DMX addressing, channel mode, The LCD-display assures easy navigation in the different setup menus. TV-Studio ready: flicker free 1200Hz LED refresh rate. Selectable lamp behavior: halogen lamp (slow) or led (fast) Four dimmer curves: linear, square, inverse square, S-curve In case of DMX failure you can choose between blackout and freeze mode. Lock function to avoid unwanted altering of the settings. White balance adjustment to perfectly match the colors of several projectors. Default factory settings + user settings can be saved loaded. 3pin DMX in outputs and Neutrik TRUE1 PowerCON in outputs for easy daisy chaining. Optional modification kit available to modify IP 3pin XLR to 5pin (BT-XLR3TO5 KIT code: B05523) Fan cooling for longer LED life. NOTE: this product has IP65 rating while used for non-permanent outdoor installation and under normal conditions (not exposed to seawater). General : Application Architectural, Stage Rental, Theatre General : Dimensions (cm) 24 x 27 x 30 General : Weight (kg) 5.53 General : Powerinput AC 100 - 240V, 50 60Hz General : Energy Label No General : Power consumption W 129 General : Color black General : Display touchscreen General : Fixation optional omega bracket General : IP rating outdoor Control : manual Yes Control : Master Slave Yes Control : SMART-DMX No Control : Standalone automatic, fixed Control : programmable No Control : upgradable software Yes Control : maximum DMX channels 7 Light : lamp socket No Light : lamp LED Light : colors RGB, RGBW Light : mix colors Yes Light : min. beam angle ( ) 15 Light : max. beam angle ( ) 15 Light : min. refresh rate (kHz) No Light : max. refresh rate (kHz) No Connections : input 3 pin XLR, PowerCon TRUE1 Connections : output 3 pin XLR, PowerCon TRUE1 Brand BRITEQ EANCode 5420025655095

RON 4048.00

1

Par led proiector briteq bt-coloray 18fcr

This stylish 18x8W RGBW projector with a 20 beam angle is a very powerful tool for all kinds of events (stage, TV-show, exhibition boots, architectural lighting, ) IP65 rating Three different DMX-modes: 4, 6 and 7 channels. RDM-functionality for easy remote setup: DMX addressing, channel mode, The LCD-display assures easy navigation in the different setup menus. TV-Studio ready: flicker free 1200Hz LED refresh rate. Selectable lamp behavior: halogen lamp (slow) or led (fast) Four dimmer curves: linear, square, inverse square, S-curve In case of DMX failure you can choose between blackout and freeze mode. Lock function to avoid unwanted altering of the settings. White balance adjustment to perfectly match the colors of several projectors. Default factory settings + user settings can be saved loaded. 3pin DMX in outputs and Neutrik TRUE1 PowerCON in outputs for easy daisy chaining. Optional modification kit available to modify IP 3pin XLR to 5pin (BT-XLR3TO5 KIT code: B05523) IP-Fan cooling for longer LED life. NOTE: this product has IP65 rating while used for non-permanent outdoor installation and under normal conditions (not exposed to seawater). General : Application Architectural, Stage Rental, Theatre General : Weight (kg) 5.28 General : Powerinput AC 100 - 240V, 50 60Hz General : Energy Label No General : Power consumption W 123 General : Color black General : Display touchscreen General : Fixation optional omega bracket General : IP rating outdoor Control : manual Yes Control : Master Slave Yes Control : SMART-DMX No Control : Standalone automatic, fixed Control : programmable No Control : upgradable software Yes Control : maximum DMX channels 7 Light : lamp socket none Light : lamp LED Light : colors Red, Green, Blue, White, RGB, RGBW Light : mix colors Yes Light : min. beam angle ( ) 20 Light : max. beam angle ( ) 20 Light : min. refresh rate (kHz) 1.2 Light : max. refresh rate (kHz) 1.2 Connections : input 3 pin XLR, PowerCon TRUE1, rdm Connections : output 3 pin XLR, PowerCon TRUE1 Brand BRITEQ EANCode 5420025655125

RON 3386.00

1

Proiector led briteq ldp-cobwash 60tc

Excellent built-in programs for wonderful, ever changing, light shows. Excellent RGB color mixing and dimming down to 0% Completely silent operation, thanks to natural convection cooling system. Backlit alphanumeric LCD-display and waterproof touch keys to select different options of the setup menu. Works in standalone, master slave or can be selected by DMX: fading colors, static colors chases Can also be used as master slave with the LDP-COBWASH 60TC in one DMX-line. Full DMX control with different channel modes: 3ch, 4ch and 6ch. Can be used with LEDCON-02 Mk2 easy controller! IR-remote controller included: no difficult controllers needed! Selectable lamp behavior: halogen lamp (slow) or led (fast) Four dimmer curves: linear, square, inverse square, S-curve In case of DMX failure you can choose between blackout and freeze mode. Lock function to avoid unwanted altering of the settings. Special waterproof power in outputs: easy daisy chaining of several units. Special waterproof DMX in outputs with adapter cables to XLR for maximum compatibility High efficiency and low power consumption: only 66W max at full power (white color).. Strong multifunctional bracket, designed for both fixed floor and truss mounting. Barn doors optionally available NOTE: this product has IP65 rating for outdoor installation under normal conditions (not exposed to seawater). General : Dimensions (cm) 22.3 x 20.2 x 12.2 cm General : Weight (kg) 3.8 General : Powerinput AC 100 - 240V, 50 60Hz General : Energy Label No General : Power consumption W 66 General : Color white General : Display LCD General : IP rating indoor, outdoor Control : manual No Control : Master Slave Yes Control : SMART-DMX No Control : Standalone automatic Control : Type included remote IR-remote Control : programmable No Control : upgradable software Yes Control : maximum DMX channels 6 Light : lamp socket No Light : lamp COB Light : colors Red, Green, Blue, Cold white, Warm white, other Light : mix colors No Light : min. beam angle ( ) 120 Light : max. beam angle ( ) 120 Light : min. refresh rate (kHz) 3.6 Light : max. refresh rate (kHz) 3.6 Connections : input 3 pin XLR

RON 2944.00

1

Par led briteq stage beamer fc - outdoor

Unwanted RGBW shadows are completely eliminated Perfect and evenly spread color mixing, even at short range Beam angle: 14 IP65 This LED projector is your first choice :To light up small, medium and large stages but also perfect for architectural lighting. Perfect alternative for traditional PAR64 projectors: only 65Watt power consumption at full output and no need for heavy dimmer packs! Different DMX operation modes: 4, 5, 6, 7, 9, 10 and 15ch Thanks to all kinds of special features this projector is the choice of professional light designers: Color temperature presets 3200K 10.000K RGBW Calibration Different dimmer curves ID-addressing Recall custom programs by DMX Menu driven LED-display with password protection on the rear panel Tempered glass lens protection Special air-valve keeps humid outside: no condense inside the projector! The 1200Hz LED scan rate makes it also a perfect choice in TV studios (no interferences with TV-cameras) Completely silent: the projector is cooled by natural air convection so no noisy fans are needed! The lightweight aluminium housing uses a double hanging bracket so it can also be used as floor projector. NOTE: this product has IP65 rating for outdoor installation under normal conditions (not exposed to seawater). General : Dimensions (cm) 24.5 x 20.5 x 24.5 General : Weight (kg) 4.96 General : Powerinput AC 100 - 240V, 50 60Hz General : Energy Label No General : Power consumption W 65 General : Color black General : Display LED General : Fixation M10 General : IP rating outdoor Control : manual Yes Control : Master Slave Yes Control : SMART-DMX No Control : Standalone automatic, fixed Control : programmable No Control : upgradable software No Control : maximum DMX channels 15 Light : lamp socket No Light : lamp LED Light : colors RGB, RGBW Light : mix colors Yes Light : min. refresh rate (kHz) 1.2 Light : max. refresh rate (kHz) 1.2 Connections : input 3 pin XLR, ip-powerlink connector Connections : output 3 pin XLR, ip-powerlink connector

RON 2724.00

1

Par led proiector briteq stage beamer fc - outdoor

Extra 16 bit TOUR -mode with 16 bit colormixing (R, G, B en W controlled by 2 channels : coarse and fine). Very powerful RGBW LED projector based on 14 quadri-color 5W OSRAM LEDs: Unwanted RGBW shadows are completely eliminated Perfect and evenly spread color mixing, even at short range Beam angle: 14 IP65 This LED projector is your first choice :To light up small, medium and large stages but also perfect for architectural lighting. Perfect alternative for traditional PAR64 projectors: only 65Watt power consumption at full output and no need for heavy dimmer packs! Different DMX operation modes: 4, 5, 6, 7, 9, 10 and 15ch Thanks to all kinds of special features this projector is the choice of professional light designers: Color temperature presets 3200K 10.000K RGBW Calibration Different dimmer curves ID-addressing Recall custom programs by DMX Menu driven LED-display with password protection on the rear panel Tempered glass lens protection Special air-valve keeps humid outside: no condense inside the projector! The 1200Hz LED scan rate makes it also a perfect choice in TV studios (no interferences with TV-cameras) Completely silent: the projector is cooled by natural air convection so no noisy fans are needed! The lightweight aluminium housing uses a double hanging bracket so it can also be used as floor projector. NOTE: this product has IP65 rating for outdoor installation under normal conditions (not exposed to seawater). General : Application Architectural, Stage Rental, Theatre General : Dimensions (cm) 24.5 x 20.5 x 24.5 General : Weight (kg) 4.96 General : Powerinput AC 100 - 240V, 50 60Hz General : Energy Label No General : Power consumption W 65 General : Color black General : Display LED General : Fixation M10 General : IP rating outdoor Control : manual Yes Control : Master Slave Yes Control : SMART-DMX No Control : Standalone automatic, fixed Control : programmable No Control : upgradable software No Control : maximum DMX channels 15 Light : lamp socket No Light : lamp LED Light : colors RGB, RGBW Light : mix colors Yes Light : min. refresh rate (kHz) 1.2 Light : max. refresh rate (kHz) 1.2 Connections : input 3 pin XLR, IP-Powerlink connector Connections : output 3 pin XLR, IP-Powerlink connector Brand BRITEQ EANCode 5420025655118

RON 2724.00

1

Par led briteq bt-smartzoom

The sturdy die cast aluminium housing is IP65 waterproof and equipped with waterproof power + 3pin 5pin XLR-connectors for easy daisy chaining of several units. This makes this projector your first choice for all kinds indoor and outdoor applications : hotels, shops, discotheques, public amusement parks, fairground attractions, theaters, TV-productions, medium and large stages, Six DMX-modes from 5 to 17 channels, including 2 modes with user beam angle preset, compatible with our PRO BEAMER! The projector looks like a traditional lamp but has all the advantages of LED: energy cost savings! Color temperature presets: 2700K 8000K White RGB Calibration for excellent color consistency Different dimmer curves and dimmer behaviors Menu driven OLED-display with password protection on the rear panel RDM compatible (remote DMX-addressing) Adjustable PWM (600Hz to 25kHz) makes it also a perfect choice in TV studios (no interferences with TV-cameras) Completely silent: the projector is cooled by natural air convection so no noisy fans are needed! Diecast aluminium housing with tempered glass and a double hanging bracket for use as floor projector. Equipped with a special GORE vent to prevent moisture and condensation inside the projector. Mains cable with IP-rated power connector included! Optional IP-POWER XLR COMBI CABLE for easy daisy chaining available in different lengths. NOTE: this product has IP65 rating while used for non-permanent outdoor installation and under normal conditions (not exposed to seawater). General : Dimensions (cm) 27,4 x 38,77 x 21 cm General : Weight (kg) 7.7 General : Powerinput AC 100 - 240V, 50 60Hz General : Energy Label N A General : Power consumption W 130 General : Color black General : Display OLED General : Fixation M12 General : IP rating outdoor Control : manual Yes Control : Master Slave Yes Control : SMART-DMX No Control : Standalone automatic, fixed Control : programmable Yes Control : upgradable software Yes Control : maximum DMX channels 17 Light : lamp socket none Light : Lux 5800lux 5m, BEAM: 4 Light : lamp LED Light : min. color temperature (K) 2700 Light : max. color temperature (K) 8000 Light : colors Red, Green, Blue, White, Cold white, Warm white, RGB, RGBW Light : mix colors Yes Light : functions motorized zoom Light : min. beam angle ( ) 4 Light : max. beam angle ( ) 36 Light : min. refresh rate (kHz) No Light : max. refresh rate (kHz) No Connections : input 3 pin XLR, 5 pin XLR, ip-power (Seetronic), rdm Connections : output 3 pin XLR, 5 pin XLR, ip-power (Seetronic)

RON 5888.00

1

Bara led briteq ldp-colorbar 12fc

Available in 2 versions: LDP-COLORBAR 12FC: 48cm long enclosure, equipped with 12 leds, divided into 2 sections. LDP-COLORBAR 24FC: 96cm long enclosure, equipped with 24 leds, divided into 4 sections. Elegant, extruded aluminum housing finished with tempered glass cover. The discretely designed bracket can be easily adjusted in any position. The included barndoor hides the LEDs and thus reduces unwanted glare. Optimal thermal management for long lifespan and easy maintenance Internal power supply and DMX LED-driver electronics for easy installation. Waterproof input and output connectors allow the user to link up to 16pcs of LDP-COLORBAR 12FC. Perfect for use in hotels, clubs, shops, homes, Excellent built-in programs for wonderful, ever changing, light shows. Completely silent operation, thanks to natural convection cooling system. Alphanumeric OLED-display and waterproof touch keys to select different options of the setup menu. Works in standalone, master slave or can be selected by DMX: fading colors, static colors chases Both models can be daisy chained and used together in master slave mode. Full DMX control with different channel modes: from 3ch up to 10ch (2 sections) or 20ch (4 sections) Adaptable lamp behavior thanks to seamless dimmer speed control. Four dimmer curves: linear, square, inverse square, S-curve In case of DMX failure, you can choose between blackout and freeze mode. Lock function to avoid unwanted altering of the settings. Special waterproof DMX in outputs with adapter cables to XLR for maximum compatibility Equipped with a special GORE vent to prevent moisture and condensation inside the projector. Optional cables available for easy, waterproof daisy chaining (LDP-Powercable Signal link cable) NOTE: this product has IP65 rating for outdoor installation under normal conditions (not exposed to seawater). General : Dimensions (cm) 46 x 5.6 x 11.4 13.5 General : Weight (kg) 3 General : Powerinput AC 100 - 240V, 50 60Hz General : Energy Label No General : Power consumption W 56 General : Color white General : Display OLED General : Fixation M10 General : IP rating outdoor Control : manual Yes Control : Master Slave Yes Control : SMART-DMX Yes Control : Standalone automatic, fixed Control : programmable No Control : upgradable software Yes Control : maximum DMX channels 10 Light : lamp socket none Light : lamp LED Light : colors Red, Green, Blue, White, RGB, RGBW Light : mix colors Yes Light : min. beam angle ( ) 15 Light : max. beam angle ( ) 15 Light : min. refresh rate (kHz) 3.6 Light : max. refresh rate (kHz) 3.6 Connections : input 3 pin XLR, ip-powerlink connector Connections : output 3 pin XLR, ip-powerlink connector

RON 3011.00

1

Hpe ns204i-u gen11 ht plg boot opt dev

Lifecycle Obsolete Date 31-07-2026 Specifications Maximum drives supported 2, included in kit Warranty HPE Solid State Drives (SDDs) and add-in cards have a standard 3/0/0 warranty; Customer Self Repair (CSR) subject to maximum usage limitations. Maximum usage limit is the maximum amount of data that can be written to the drive. Drives that have reached this limit will not be eligible for warranty coverage. Platform supported HPE ProLiant DL, ML and HPE Apollo servers. See QuickSpecs for a detailed listing of supported platforms. RAID levels Dedicated hardware RAID 1 Compliance RoHS, Lot 9 Weight 0.421 lb Product dimensions (metric) 22.23 x 25.24 x 6.51 cm Product dimensions (imperial) 8.75 x 9.94 x 2.56 in Weight 0.19 kg Cache N/A Usable capacity 480GB Form factor PCIe half-height, half-length (HHHL) card PCIe support Gen3 Battery N/A Quickspecs QuickSpecs (PDF) QuickSpecs QuickSpecs (HTML) QuickSpecs Overview Do you need to simplify data segregation? HPE OS Boot Devices offer enterprise customers turnkey, resilient boot solutions that easily segregate the OS from the data storage plane in today’s popular OS for virtualized environments—VMware®, Linux®, Windows®. HPE NS204i-u is a universal installation hot plug OS boot device that includes two 480 GB M.2 NVMe SSDs. The universal installation removes the need for cables and backplanes. This device no longer takes up a PCIe slot, and auto-creates RAID 1 volume. HPE NS204i-p and NS204i-d NVMe OS Boot Devices are self-contained boot solutions in simple, pre-configured PCIe cards and HPE Synergy Option requires no GUI or user setup. These plug-and-play OS boot devices include two 480 GB M.2 SSDs, enabling customers to mirror OS through hardware RAID 1. Based on NVMe technology, HPE NS204i-p and NS204i-d NVMe OS Boot Devices deliver up to 4x faster read capability than legacy SATA boot solutions.[1] What's new Dedicated Hardware RAID 1 OS Boot Device. Includes two HPE enterprise-class 480 GB NVMe M.2 SSDs on a single HPE Synergy add-in card. Utilizes native in-box OS NVMe drivers. Hot plug universal installation (No longer requires a PCIe slot) . No cables or backplanes required. Supports HPE Synergy Gen10 Plus Compute platforms. Features Engineered with enterprise-class high endurance NAND for non-stop data center environments. Integrated on-board RAID 1 for customers requiring dual boot solution. Pre-configured RAID 1 OS boot utilizes a single HPE Synergy designed card that connect to PCIe connection under drive cages to safely isolate OS from user data on today’s popular virtualized environments. Uses native in-box driver support for VMware, Linux, and Windows OS. Supports secure firmware boot for simple and secure setup of HPE Synergy 480 Gen10 Plus Compute Modules. Enables all drive bays are used for data, greatly reducing server complexity, while providing an economical way for booting in virtualized environments. State-of-the-Art, Hardware Accelerated RAID 1 NVMe OS Boot Device HPE NS

RON 4005.00

1

Comerciant

Preț (EUR)