238 resultater (0,21300 sekunder)

Vis alle filtre

Merke

Farge

Vis alle

Butikk

Pris (EUR)

Vis alle

Nullstill filter

Produkter
Fra
Butikker

Schneider Electric Extended rotary handle ComPacT NSX 100/160/250 black handle shaft length 185 to 600 mm IP55 - Komponenter for switchboxes og skap

Schneider Electric Extended rotary handle ComPacT NSX 100/160/250 black handle shaft length 185 to 600 mm IP55 - Komponenter for switchboxes og skap

It is an extended rotary handle for ComPacT NSX 100/160/250, PowerPact Multistandard H/J frames and EasyPact CVS 100/160/250 devices. It is suitable for isolation and it is used for standard applications. It maintains the access to trip unit settings and to the push to trip button. It is equipped with a standard black handle. There is an indication of the three device positions O (OFF), I (ON) and tripped. This extended version makes possible to operate devices installed at back of switchboards, from the switchboard front. The distance between the back of the circuit breaker and the switchboard door is from 185mm to 600mm. The degrees of protection are IP55 and IK08. This rotary handle is padlockable in the OFF position using 1 to 3 padlocks not supplied (shackle diameter 5 to 8mm). As an option, it is possible to install a Ronis or Profalux keylock on the base of the handle to obtain the same function as with a padlock.

NOK 1443.00
1

Schneider Electric Zelio socket with push-in spring clamps for RXG relays with 2 contact sets - Komponenter for switchboxes og skap

Schneider Electric Zelio socket with push-in spring clamps for RXG relays with 2 contact sets - Komponenter for switchboxes og skap

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE08P is a socket with separate push-in terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.The RGZE08P fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm2 and there is a integrated test point built into the socket.For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.The socket is marked with both NEMA and IEC markings.

NOK 112.00
1

Schneider Electric Acti9 Signal contact iOF 1OC 2mA to 100mA for iC60 RCBO iC40 iCV40 screw terminal bottom 24...230V AC - Komponenter for switchboxes

Schneider Electric Acti9 Signal contact iOF 1OC 2mA to 100mA for iC60 RCBO iC40 iCV40 screw terminal bottom 24...230V AC - Komponenter for switchboxes

This Acti9 electrical auxiliary is a modular OC contact used as remote indication ot the position of the associated device. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 1 position switch with contacts type 1 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iCV40 Vigi ARC, iC40 XA, iCV40 XA and iC60 RCBO. This OC contact is compatible with Acti9 ranges such as Acti9 iDT40, iDT40 XA, iDD40 and iKQE RCBO. It has a screw clamp terminal connection at bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. The iOF is either used for device short name or compatibility code. It has a screw clamp terminal connection at bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 86mm x (D) 73mm. The product colour is white (RAL 9003). The pollution degree is 3. The level of tropicalisation is treatment 2. The tightening torque of connection is 1N.m (bottom) for PZ1 screwdriver type. According to IEC 60529 sta

NOK 230.00
1

Schneider Electric Acti9 Signal & Alarm contact iOF 1OC 2mA to 100mA for iC60 RCBO iC40 iCV40 screw terminal top & bottom 24...230V AC & 24...220V DC

Schneider Electric Acti9 Signal & Alarm contact iOF 1OC 2mA to 100mA for iC60 RCBO iC40 iCV40 screw terminal top & bottom 24...230V AC & 24...220V DC

This Acti9 electrical auxiliary is a modular OC and fault contact. The 2 contacts (2 NO/NC) can report the signalling information of the associated device to a programmable logic controller. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 2 position switches with contacts type 2 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC and fault contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC60 and iID double terminals residual current circuit breaker (RCCB). The OC and fault contact is installed for only Acti9 ranges such as iID, iDPN Vigi, iSW-NA, ARA, iC60 and RCA devices which includes 2 changeover contacts. If there is no comb busbar, it is also compatible with iC40, iC40 ARC, iCV40, iCV40 Vigi ARC. The iSD+OF is either used for device short name or compatibility code. The mechanical indicator is provided on the product for signalling (Local). It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 90mm x (D) 73mm. The product colour is white

NOK 381.00
1

Schneider Electric Residual Current Module Protection 4P ComPacT NSX 100/160 200 VAC to 440 VAC 30 mA to 3 A = Class A - Komponenter for switchboxes

Schneider Electric Residual Current Module Protection 4P ComPacT NSX 100/160 200 VAC to 440 VAC 30 mA to 3 A = Class A - Komponenter for switchboxes

This is a Vigi add-on module for ComPact NSX 100/160 that provides an earth-leakage protection. It is used for 4 poles circuit breakers. The operational rated voltage is between 200 and 440 VAC 50/60 Hz. The earth-leakage sensitivity is adjustable from 30 mA to 30 A. It is installed directly on the device terminals and directly actuates the trip unit in case of earth-leakage default. This Vigi add-on module is self-powered internally by the distribution-system voltage, even is supplied by only 2 phases. It is compliant with IEC 60947-2 standard, annex B.

NOK 14127.00
1

Schneider Electric Acti9 iacts reliable remote indication auxiliary 5a 1no+1nc - Komponenter for switchboxes og skap

Schneider Electric Acti9 iacts reliable remote indication auxiliary 5a 1no+1nc - Komponenter for switchboxes og skap

This Acti9 iACTs is reliable remote indication auxiliary. It has 1 open and close 1 contacts, it operates from 24VAC to 240VAC and 24VDC to 130VDC. Mounting is performed on the right of Acti9 iCT contactors. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. It is compatible with all Acti9 iCT Contactors. This product helps reporting the status of a contactor and is especially required in a connected environment. This product is compliant with EN 60947-5.

NOK 280.00
1

Schneider Electric Acti9 impulse relay itlc - 1p - 1no - 16a - coil 230...240 v - Komponenter for switchboxes og skap

Schneider Electric Acti9 impulse relay itlc - 1p - 1no - 16a - coil 230...240 v - Komponenter for switchboxes og skap

This Acti9 iTLc is a modular and reliable impulse relay. This 1P device has 1 normally open contact. The rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 230VAC to 240VAC control voltage. Electrical endurance goes up to 200000 cycles for AC-21 or 100000 cycles for AC-22. The switching frequency is 100 switching operations/day or 5 switching operations/minute. The duration of the command order should be between 50ms to 1s. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. It is mainly used for lighting control applications. It allow centralized control of a group of impulse relays whilst keeping local individual control of each impulse relay. This product is compliant with IEC/EN 60669-1, IEC/EN 60669-2-2.

NOK 486.00
1

Schneider Electric Timer delay on de-energization1s-10m 1 c/o 8a 24-240v - Komponenter for switchboxes og skap

Schneider Electric Timer delay on de-energization1s-10m 1 c/o 8a 24-240v - Komponenter for switchboxes og skap

The Zelio RE22 range brings to market 2 new key improvements.- The backlight LED dials for adjustment makes it easy to use in any condition, even in dusty or poorly lit enviroments. - The built-in testbutton simplifies commissioning and troubleshooting by a push of a button.RE22R1KMR is an off-delay on de-energization without auxiliary supply. The timer is supplied by 24 -240V AC/DC which makes it usable in most applications.The time range can be selected between 7 ranges and adjusted within by the 2 dials on the front.Selectable time ranges:0-1 second0-3 seconds0-10 seconds0-30 seconds0-100 seconds0-300 seconds0-10 minutesThe LED's on the front shows the status of the contacts.RE22R1KMR has no built-in testbutton.

NOK 1306.00
1

Schneider Electric Timer on-delay 1s-300h 1 c/o 8a 24-240v - Komponenter for switchboxes og skap

Schneider Electric Timer on-delay 1s-300h 1 c/o 8a 24-240v - Komponenter for switchboxes og skap

The Zelio RE22 range brings to market 2 new key improvements.- The backlight LED dials for adjustment makes it easy to use in any condition, even in dusty or poorly lit enviroments. - The built-in testbutton simplifies commissioning and troubleshooting by a push of a button.RE22R1AMR is an on-delay timer activated by the powersupply.The timer is supplied by 24 -240V AC/DC which makes it usable in most applications.The time range can be selected between 10 ranges and adjusted within by the 2 dials on the front.Selectable time ranges:0-1 second0-3 seconds0-10 seconds0-30 seconds0-100 seconds0-300 seconds0-30 minutes0-300 minutes0-30 hours0-300 hoursThe LED's on the front shows the status of the contacts.The testbutton force the output when the timer is powered on.

NOK 965.00
1

Schneider Electric Tesys gv motor circuit breaker gv2me16 thermal-magnetic 9 - Komponenter for switchboxes og skap

Schneider Electric Tesys gv motor circuit breaker gv2me16 thermal-magnetic 9 - Komponenter for switchboxes og skap

GV2ME16 is a TeSys GV motor circuit breaker from Schneider Electric designed for motor applications 5.5kW@400V. It fulfills a thermal-magnetic protection with a thermal setting range 9-14A, magnetic tripping at 12xIn and breaking capacity Icu 15kA@400V. Start-stop control by push-button guaranteed for 100 000 cycles AC-3 415V. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Complete motor protection in a single device : short-circuit, overload, disconnection. Associated with a TeSys contactor, it ensures a complete type 1 or type 2 Motor Starter solution . Light and compact, 45mm wide, for DIN-rail and panel mounting. Manual control with push-buttons for Start / Stop, padlockable. Possible mounting of auxiliary contacts front or side mounted (GVAE, GVAN, GVAD) for status and tripping signalling. For industrial or building LV distribution networks thanks to a 15kA breaking capacity. Power connections with screw clamp terminals, also available with springs and lugs terminals. Can be associated with undervoltage or shunt tripping units (GVAU, GVAS) and power distribution busbars (GV2G)

NOK 1049.00
1

Schneider Electric Timer on-delay 1s-300h 2 c/o 24-240v - Komponenter for switchboxes og skap

Schneider Electric Timer on-delay 1s-300h 2 c/o 24-240v - Komponenter for switchboxes og skap

The Zelio RE22 range brings to market 2 new key improvements.- The backlight LED dials for adjustment makes it easy to use in any condition, even in dusty or poorly lit enviroments. - The built-in testbutton simplifies commissioning and troubleshooting by a push of a button.RE22R2AMR is an on-delay timer activated by the powersupply.The timer is supplied by 24 -240V AC/DC which makes it usable in most applications.The time range can be selected between 10 ranges and adjusted within by the 2 top dials on the front.The timer has 2 C/O contacts and you can choose if R2 should follow R1 or if it should be activated instantly with power up of the timer.You adjust this with the bottom dial which can be set to TIMED or INST function.Selectable time ranges:0-1 second0-3 seconds0-10 seconds0-30 seconds0-100 seconds0-300 seconds0-30 minutes0-300 minutes0-30 hours0-300 hoursThe LED's on the front shows the status of the contacts.The testbutton force the output when the t

NOK 1401.00
1

Schneider Electric Tesys gv motor circuit breaker gv2me14 thermal-magnetic 6 - Komponenter for switchboxes og skap

Schneider Electric Tesys gv motor circuit breaker gv2me14 thermal-magnetic 6 - Komponenter for switchboxes og skap

GV2ME14 is a TeSys GV motor circuit breaker from Schneider Electric designed for motor applications 3-4kW@400V. It fulfills a thermal-magnetic protection with a thermal setting range 6-10A, magnetic tripping at 12xIn and high breaking capacity Icu 100kA@400V. Start-stop control by push-button guaranteed for 100 000 cycles AC-3 415V. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Complete motor protection in a single device : short-circuit, overload, disconnection. Associated with a TeSys contactor, it ensures a complete type 1 or type 2 Motor Starter solution . Light and compact, 45mm wide, for DIN-rail and panel mounting. Manual control with push-buttons for Start / Stop, padlockable. Possible mounting of auxiliary contacts front or side mounted (GVAE, GVAN, GVAD) for status and tripping signalling. For large industrial or building LV distribution networks thanks to a high 100kA breaking capacity. Power connections with screw clamp terminals, also available with springs and lugs terminals. Can be associated with undervoltage or shunt tripping units (GVAU, GVAS) and power distribution busbars (GV2G)

NOK 1049.00
1