Pricemate

Grundfos circulator alpha3 25-60 130 mm - Pumper

ALPHA3 - easy hydronic balancingThe ALPHA3 is our newest circulator for domestic buildings. It is of the renowned Grundfos quality and guarantees easy installation, world-class energy efficiency and reliable operation in the toughest conditions. For the ultimate benefits of the ALPHA3, however, installers need two other components - the ALPHA Reader and the Grundfos GO Balance app. Together, the state-of-the-art ALPHA3 system helps installers complete a hydronic balancing incredibly fast and accurately.ALPHA READERThe ALPHA Reader is a pocket-sized device that you attach to the front of the ALPHA3. It reads a light signal from the pump and communicates with the Grundfos GO Balance app via Bluetooth during the balancing process. Once the hydronic balancing is done, installers can simply take the ALPHA Reader with them to their next job.GRUNDFOS GO BALANCE APPThe Grundfos Go Balance app is downloaded from iTunes or Google Play. The app picks up the Bluetooth signal from the ALPHA Reader and guides installers through four simple balancing steps.FAST AND EASY BALANCINGWith the ALPHA3, the ALPHA Reader and the Grundfos GO Balance app, installers are set for fast and easy system balancing - without compromising on reliability, efficiency and easy installation.Hydronic Balancing with ALPHA3 and ALPHA reader works with: Two pipe radiator systemsThe GRUNDFOS ALPHA3 is suitable for running in: Systems with constant or varying flow One pipe systems Two pipe systems Domestic hot-water recirculation Underfloor heating systems Systems where night setback is required.Features and benefits Hydronic Balancing No blockage Best in class efficiencyBenefits of hydronic Balancing: Savings on heating bill between 7-20 %* Lower return temperature in the system Lower noise in the heating system

NOK 6005.00

1

Grundfos circulator alpha2 15-60 130 mm - Pumper

ALPHA2 is able to withstand the tough conditions in a heating system, and with four newly added features, it just got even tougher:Robust start-up:Shakes free any impurities before the pump starts at the beginning of the heating season.Summer mode:Adjustment of the pumps performance in the summer to the warmer temperature outside - giving customers extra energy efficiency.Magnetite resistance:Ensures that no small pieces of metal get stuck in the pumps vital parts when they are magnetised.Dry-running protection:Makes sure the pump never runs without liquid in the system - add to that unrivalled energy efficiency, easy installation and the fact that ALPHA2 covers both your heating demands and up to 90 % of your air-conditioning and cooling demands.The GRUNDFOS ALPHA2 is suitable for: Systems with constant or varying flow One pipe systems Two pipe systems Underfloor-heating Domestic hot-water recirculation Systems where night setback is required.Features and benefits Better performance with market leading efficiency (EEI0.15) in a more compact design New flow meter for trouble-shooting and balancing AUTOADAPT selects best performance curve for efficiency and comfort Innovative plug simplifies pump connection Insulation shells included.

NOK 5395.00

1

Grundfos circulator alpha3 25-40 180 mm - Pumper

ALPHA3 - easy hydronic balancingThe ALPHA3 is our newest circulator for domestic buildings. It is of the renowned Grundfos quality and guarantees easy installation, world-class energy efficiency and reliable operation in the toughest conditions. For the ultimate benefits of the ALPHA3, however, installers need two other components - the ALPHA Reader and the Grundfos GO Balance app. Together, the state-of-the-art ALPHA3 system helps installers complete a hydronic balancing incredibly fast and accurately.ALPHA READERThe ALPHA Reader is a pocket-sized device that you attach to the front of the ALPHA3. It reads a light signal from the pump and communicates with the Grundfos GO Balance app via Bluetooth during the balancing process. Once the hydronic balancing is done, installers can simply take the ALPHA Reader with them to their next job.GRUNDFOS GO BALANCE APPThe Grundfos Go Balance app is downloaded from iTunes or Google Play. The app picks up the Bluetooth signal from the ALPHA Reader and guides installers through four simple balancing steps.FAST AND EASY BALANCINGWith the ALPHA3, the ALPHA Reader and the Grundfos GO Balance app, installers are set for fast and easy system balancing - without compromising on reliability, efficiency and easy installation.Hydronic Balancing with ALPHA3 and ALPHA reader works with: Two pipe radiator systemsThe GRUNDFOS ALPHA3 is suitable for running in: Systems with constant or varying flow One pipe systems Two pipe systems Domestic hot-water recirculation Underfloor heating systems Systems where night setback is required.Features and benefits Hydronic Balancing No blockage Best in class efficiencyBenefits of hydronic Balancing: Savings on heating bill between 7-20 %* Lower return temperature in the system Lower noise in the heating system

NOK 5234.00

1

Grundfos circulator alpha3 15-60 130 mm - Pumper

ALPHA3 - easy hydronic balancingThe ALPHA3 is our newest circulator for domestic buildings. It is of the renowned Grundfos quality and guarantees easy installation, world-class energy efficiency and reliable operation in the toughest conditions. For the ultimate benefits of the ALPHA3, however, installers need two other components - the ALPHA Reader and the Grundfos GO Balance app. Together, the state-of-the-art ALPHA3 system helps installers complete a hydronic balancing incredibly fast and accurately.ALPHA READERThe ALPHA Reader is a pocket-sized device that you attach to the front of the ALPHA3. It reads a light signal from the pump and communicates with the Grundfos GO Balance app via Bluetooth during the balancing process. Once the hydronic balancing is done, installers can simply take the ALPHA Reader with them to their next job.GRUNDFOS GO BALANCE APPThe Grundfos Go Balance app is downloaded from iTunes or Google Play. The app picks up the Bluetooth signal from the ALPHA Reader and guides installers through four simple balancing steps.FAST AND EASY BALANCINGWith the ALPHA3, the ALPHA Reader and the Grundfos GO Balance app, installers are set for fast and easy system balancing - without compromising on reliability, efficiency and easy installation.Hydronic Balancing with ALPHA3 and ALPHA reader works with: Two pipe radiator systemsThe GRUNDFOS ALPHA3 is suitable for running in: Systems with constant or varying flow One pipe systems Two pipe systems Domestic hot-water recirculation Underfloor heating systems Systems where night setback is required.Features and benefits Hydronic Balancing No blockage Best in class efficiencyBenefits of hydronic Balancing: Savings on heating bill between 7-20 %* Lower return temperature in the system Lower noise in the heating system

NOK 6617.00

1

Grundfos circulator alpha3 25-80 180 mm - Pumper

ALPHA3 - easy hydronic balancingThe ALPHA3 is our newest circulator for domestic buildings. It is of the renowned Grundfos quality and guarantees easy installation, world-class energy efficiency and reliable operation in the toughest conditions. For the ultimate benefits of the ALPHA3, however, installers need two other components - the ALPHA Reader and the Grundfos GO Balance app. Together, the state-of-the-art ALPHA3 system helps installers complete a hydronic balancing incredibly fast and accurately.ALPHA READERThe ALPHA Reader is a pocket-sized device that you attach to the front of the ALPHA3. It reads a light signal from the pump and communicates with the Grundfos GO Balance app via Bluetooth during the balancing process. Once the hydronic balancing is done, installers can simply take the ALPHA Reader with them to their next job.GRUNDFOS GO BALANCE APPThe Grundfos Go Balance app is downloaded from iTunes or Google Play. The app picks up the Bluetooth signal from the ALPHA Reader and guides installers through four simple balancing steps.FAST AND EASY BALANCINGWith the ALPHA3, the ALPHA Reader and the Grundfos GO Balance app, installers are set for fast and easy system balancing - without compromising on reliability, efficiency and easy installation.Hydronic Balancing with ALPHA3 and ALPHA reader works with: Two pipe radiator systemsThe GRUNDFOS ALPHA3 is suitable for running in: Systems with constant or varying flow One pipe systems Two pipe systems Domestic hot-water recirculation Underfloor heating systems Systems where night setback is required.Features and benefits Hydronic Balancing No blockage Best in class efficiencyBenefits of hydronic Balancing: Savings on heating bill between 7-20 %* Lower return temperature in the system Lower noise in the heating system

NOK 7363.00

1

Grundfos circulator alpha3 25-60 180 mm - Pumper

ALPHA3 - easy hydronic balancingThe ALPHA3 is our newest circulator for domestic buildings. It is of the renowned Grundfos quality and guarantees easy installation, world-class energy efficiency and reliable operation in the toughest conditions. For the ultimate benefits of the ALPHA3, however, installers need two other components - the ALPHA Reader and the Grundfos GO Balance app. Together, the state-of-the-art ALPHA3 system helps installers complete a hydronic balancing incredibly fast and accurately.ALPHA READERThe ALPHA Reader is a pocket-sized device that you attach to the front of the ALPHA3. It reads a light signal from the pump and communicates with the Grundfos GO Balance app via Bluetooth during the balancing process. Once the hydronic balancing is done, installers can simply take the ALPHA Reader with them to their next job.GRUNDFOS GO BALANCE APPThe Grundfos Go Balance app is downloaded from iTunes or Google Play. The app picks up the Bluetooth signal from the ALPHA Reader and guides installers through four simple balancing steps.FAST AND EASY BALANCINGWith the ALPHA3, the ALPHA Reader and the Grundfos GO Balance app, installers are set for fast and easy system balancing - without compromising on reliability, efficiency and easy installation.Hydronic Balancing with ALPHA3 and ALPHA reader works with: Two pipe radiator systemsThe GRUNDFOS ALPHA3 is suitable for running in: Systems with constant or varying flow One pipe systems Two pipe systems Domestic hot-water recirculation Underfloor heating systems Systems where night setback is required.Features and benefits Hydronic Balancing No blockage Best in class efficiencyBenefits of hydronic Balancing: Savings on heating bill between 7-20 %* Lower return temperature in the system Lower noise in the heating system

NOK 6005.00

1

Grundfos circulator alpha2 25-80 180 mm - Pumper

ALPHA2 is able to withstand the tough conditions in a heating system, and with four newly added features, it just got even tougher:Robust start-up:Shakes free any impurities before the pump starts at the beginning of the heating season.Summer mode:Adjustment of the pumps performance in the summer to the warmer temperature outside - giving customers extra energy efficiency.Magnetite resistance:Ensures that no small pieces of metal get stuck in the pumps vital parts when they are magnetised.Dry-running protection:Makes sure the pump never runs without liquid in the system - add to that unrivalled energy efficiency, easy installation and the fact that ALPHA2 covers both your heating demands and up to 90 % of your air-conditioning and cooling demands.The GRUNDFOS ALPHA2 is suitable for: Systems with constant or varying flow One pipe systems Two pipe systems Underfloor-heating Domestic hot-water recirculation Systems where night setback is required.Features and benefits Better performance with market leading efficiency (EEI0.15) in a more compact design New flow meter for trouble-shooting and balancing AUTOADAPT selects best performance curve for efficiency and comfort Innovative plug simplifies pump connection Insulation shells included.

NOK 6092.00

1

Grundfos circulator alpha2 32-60 180 mm - Pumper

ALPHA2 is able to withstand the tough conditions in a heating system, and with four newly added features, it just got even tougher:Robust start-up:Shakes free any impurities before the pump starts at the beginning of the heating season.Summer mode:Adjustment of the pumps performance in the summer to the warmer temperature outside - giving customers extra energy efficiency.Magnetite resistance:Ensures that no small pieces of metal get stuck in the pumps vital parts when they are magnetised.Dry-running protection:Makes sure the pump never runs without liquid in the system - add to that unrivalled energy efficiency, easy installation and the fact that ALPHA2 covers both your heating demands and up to 90 % of your air-conditioning and cooling demands.The GRUNDFOS ALPHA2 is suitable for: Systems with constant or varying flow One pipe systems Two pipe systems Underfloor-heating Domestic hot-water recirculation Systems where night setback is required.Features and benefits Better performance with market leading efficiency (EEI0.15) in a more compact design New flow meter for trouble-shooting and balancing AUTOADAPT selects best performance curve for efficiency and comfort Innovative plug simplifies pump connection Insulation shells included.

NOK 5482.00

1

Grundfos circulator alpha2 25-80 130 mm - Pumper

ALPHA2 is able to withstand the tough conditions in a heating system, and with four newly added features, it just got even tougher:Robust start-up:Shakes free any impurities before the pump starts at the beginning of the heating season.Summer mode:Adjustment of the pumps performance in the summer to the warmer temperature outside - giving customers extra energy efficiency.Magnetite resistance:Ensures that no small pieces of metal get stuck in the pumps vital parts when they are magnetised.Dry-running protection:Makes sure the pump never runs without liquid in the system - add to that unrivalled energy efficiency, easy installation and the fact that ALPHA2 covers both your heating demands and up to 90 % of your air-conditioning and cooling demands.The GRUNDFOS ALPHA2 is suitable for: Systems with constant or varying flow One pipe systems Two pipe systems Underfloor-heating Domestic hot-water recirculation Systems where night setback is required.Features and benefits Better performance with market leading efficiency (EEI0.15) in a more compact design New flow meter for trouble-shooting and balancing AUTOADAPT selects best performance curve for efficiency and comfort Innovative plug simplifies pump connection Insulation shells included.

NOK 6276.00

1

Grundfos circulator alpha2 25-40 n 180 mm - Pumper

ALPHA2 is able to withstand the tough conditions in a heating system, and with four newly added features, it just got even tougher:Robust start-up:Shakes free any impurities before the pump starts at the beginning of the heating season.Summer mode:Adjustment of the pumps performance in the summer to the warmer temperature outside - giving customers extra energy efficiency.Magnetite resistance:Ensures that no small pieces of metal get stuck in the pumps vital parts when they are magnetised.Dry-running protection:Makes sure the pump never runs without liquid in the system - add to that unrivalled energy efficiency, easy installation and the fact that ALPHA2 covers both your heating demands and up to 90 % of your air-conditioning and cooling demands.The GRUNDFOS ALPHA2 is suitable for: Systems with constant or varying flow One pipe systems Two pipe systems Underfloor-heating Domestic hot-water recirculation Systems where night setback is required.Features and benefits Better performance with market leading efficiency (EEI0.15) in a more compact design New flow meter for trouble-shooting and balancing AUTOADAPT selects best performance curve for efficiency and comfort Innovative plug simplifies pump connection Insulation shells included.

NOK 8159.00

1

Grundfos magna3 32-100 cirkulating pump 180 mm - Pumper

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 13476.00

1

Grundfos magna3 32-80f cirkulating pump 220 mm - Pumper

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 13252.00

1

Grundfos magna3 25-80 cirkulating pump 180 mm - Pumper

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 10362.00

1

Grundfos magna3 25-60n cirkulating pump 180 mm - Pumper

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 15712.00

1

Grundfos magna3 25-100 cirkulating pump 180 mm - Pumper

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 12268.00

1

Grundfos circulator alpha2 25-40 n 130 mm - Pumper

ALPHA2 is able to withstand the tough conditions in a heating system, and with four newly added features, it just got even tougher:Robust start-up:Shakes free any impurities before the pump starts at the beginning of the heating season.Summer mode:Adjustment of the pumps performance in the summer to the warmer temperature outside - giving customers extra energy efficiency.Magnetite resistance:Ensures that no small pieces of metal get stuck in the pumps vital parts when they are magnetised.Dry-running protection:Makes sure the pump never runs without liquid in the system - add to that unrivalled energy efficiency, easy installation and the fact that ALPHA2 covers both your heating demands and up to 90 % of your air-conditioning and cooling demands.The GRUNDFOS ALPHA2 is suitable for: Systems with constant or varying flow One pipe systems Two pipe systems Underfloor-heating Domestic hot-water recirculation Systems where night setback is required.Features an

NOK 8407.00

1

Grundfos magna3 25-40 cirkulating pump 180 mm - Pumper

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 7935.00

1

Grundfos comfort 15-14 bxa pm 140 mm - Pumper

COMFORT 15-14 BXA PM 140 mmThe high efficiency Coomfort PM range is a product for domestic hotwater recirculation in 1 and 2 family houses.The motor is a single-phase, 2-pole, hysteresis, permanent-magnet motor in conformity with the EMC directive.Characteristics and benefits:* Unique AUTOADAPT saves up to 50% heatenergy and 87% motor energy compared with a standard pump in continuous operation* Flushing function* Automatic legionella operation (if supported from the system)* Automatic weekend and vacation function* Temperature control optional* Continuous operation optional* Fast and simple electrical installation due to the million times trusted ALPHA plug* Easy to clean and lime insensitive spheric rotor* Application area up 14°dH water hardness* Wearless operation due to liquid lubricated bearing* No leakage risk due to a static seal* Easy maintenance and cleaning by easy-to-separated motor head that fits on all standard circulation pump housings* Korrosion resistant pump housing in brass* Due to impedance protected motor no motor protection necessary* No additional installation costs due to integrated non return and stop valve in the pump housingLiquid:Liquid temperature range:2 .. 95 °CTechnical:TF class:95Approvals on nameplate:VDE,GS,CEMaterials:Pump housing:Brass MS 68Impeller:Stainless steel, EPDM, PPO, PTFE, GraphitInstallation:Maximum operating pressure:10 barPipe connection:G 1 1/4Port-to-port length:110 mmElectrical data:Max. power input:8 WRated voltage:1 x 230 VCurrent in speed 3:0.07 ACapacitor size - run:0.6 FEnclosure class (IEC 34-5):IP44Insulation class (IEC 85):FOthers:Net weight:1.35 kgGross weight:1.51 kgShipping volume:0.003 m3

NOK 5763.00

1

Grundfos magna3 32-80 cirkulating pump 180 mm - Pumper

Det beste valget når systemkontroll og overvåking er viktig. MAGNA3 støtter feltbuss ved hjelp av valgfrie CIM-moduler og har en TFT-skjerm for intuitiv konfigurasjon av intelligente funksjoner. Bruksområder: Oppvarming, aircondition, pumpekonstruksjoner: Hermetisk rotor Tekniske data: Maksimalt trykkhode: 18,88 m Væsketemperatur: -10 .. 110 ° C Maksimal strømningsevne: 76,6 m3 / h maks.: 16 bar

NOK 11853.00

1

Grundfos circulator alpha2 25-80 n 180 mm - Pumper

ALPHA2 is able to withstand the tough conditions in a heating system, and with four newly added features, it just got even tougher:Robust start-up:Shakes free any impurities before the pump starts at the beginning of the heating season.Summer mode:Adjustment of the pumps performance in the summer to the warmer temperature outside - giving customers extra energy efficiency.Magnetite resistance:Ensures that no small pieces of metal get stuck in the pumps vital parts when they are magnetised.Dry-running protection:Makes sure the pump never runs without liquid in the system - add to that unrivalled energy efficiency, easy installation and the fact that ALPHA2 covers both your heating demands and up to 90 % of your air-conditioning and cooling demands.The GRUNDFOS ALPHA2 is suitable for: Systems with constant or varying flow One pipe systems Two pipe systems Underfloor-heating Domestic hot-water recirculation Systems where night setback is required.Features and benefits Better performance with market leading efficiency (EEI0.15) in a more compact design New flow meter for trouble-shooting and balancing AUTOADAPT selects best performance curve for efficiency and comfort Innovative plug simplifies pump connection Insulation shells included.

NOK 9886.00

1

Grundfos magna3 32-60 cirkulating pump 180 mm - Pumper

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 11819.00

1

Grundfos magna3 25-40n cirkulating pump 180 mm - Pumper

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 12920.00

1

Grundfos magna3 25-60 cirkulating pump 180 mm - Pumper

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

NOK 9396.00

1

Grundfos circulator alpha2 25-60 n 180 mm - Pumper

ALPHA2 is able to withstand the tough conditions in a heating system, and with four newly added features, it just got even tougher:Robust start-up:Shakes free any impurities before the pump starts at the beginning of the heating season.Summer mode:Adjustment of the pumps performance in the summer to the warmer temperature outside - giving customers extra energy efficiency.Magnetite resistance:Ensures that no small pieces of metal get stuck in the pumps vital parts when they are magnetised.Dry-running protection:Makes sure the pump never runs without liquid in the system - add to that unrivalled energy efficiency, easy installation and the fact that ALPHA2 covers both your heating demands and up to 90 % of your air-conditioning and cooling demands.The GRUNDFOS ALPHA2 is suitable for: Systems with constant or varying flow One pipe systems Two pipe systems Underfloor-heating Domestic hot-water recirculation Systems where night setback is required.Features and benefits Better performance with market leading efficiency (EEI0.15) in a more compact design New flow meter for trouble-shooting and balancing AUTOADAPT selects best performance curve for efficiency and comfort Innovative plug simplifies pump connection Insulation shells included.

NOK 9368.00

1

Grundfos unilift ap 12.40.06.1 1x230v 10m sch - Pumper

Unilift AP12.40.06.1Submersible drainage pump typeVertical single-stage stainless steel submersiblepump with vertical discharge port and integratedsubmersible 1-phase totally enclosed motorin insulation class F with thermal overloadprotection. The pump is fitted with a suctionstrainer.The impeller is a SEMI OPEN impeller for12 mm free passage suitable for pumpinggroundwater, surface water, rain water andsimilar.The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.The pump is ready for use as it is fitted withcarrying handle and is supplied with a10 m mains cable. The mains cable is of theplug type with glass sealing compound in thesocket to prevent penetration of humidity intothe stator windings.Liquid:Liquid temperature range:0 .. 55 °CTechnical:Type of impeller:SEMI OPENMaximum particle size:12 mmMaterials:Pump housing:Stainless steelPump housing:DIN W.-Nr. 1.4301Pump housing:AISI 304Impeller:Stainless steelImpeller:DIN W.-Nr. 1.4301Impeller:AISI 304Installation:Pump outlet:Rp 1 1/2Maximum installation depth:10 mElectrical data:Type of motor:PSCPower input - P1:0.9 kWRated voltage:1 x 230 VRated current:4.4 ACos phi - power factor:0,99Rated speed:2785 rpmCapacitor size - run:16 F/400 VEnclosure class (IEC 34-5):IP68Insulation class (IEC 85):FLength of cable:10 mType of cable plug: SchukoOthers:Net weight:12 kgGross weight:12.5 kg

NOK 13512.00

1

Merke

Farge

Butikk

Pris (EUR)