Pricemate

T Gas To Suit IM350

T Gas to suit the Paslode IM350 & 1st fix nail guns

EUR 8.73

1

55013 Yellow Gas to Suit IM250

Yellow gas to suite the Paslode IM250 & 2nd Fix nail guns

EUR 8.73

1

Timber to Timber Joist Hanger 50mm

A quick and safe method of joist trimming for light , medum and heavy applictions such as supporting floor joists, trimming stair wells and underslung joists. They have increased hole centres to spread load over greater area. Fix using 30 x 3.75mm square twist nails in all available nail holes.

EUR 1.16

1

Timber to Timber Joist Hanger 38mm

A quick and safe method of joist trimming for light , medum and heavy applictions such as supporting floor joists, trimming stair wells and underslung joists. They have increased hole centres to spread load over greater area. Fix using 30 x 3.75mm square twist nails in all available nail holes.

EUR 1.02

1

Stanley 8 Metre Measuring Tape

High-contrast blade for easy readability High-impact, high-visibility yellow case stands For all types of application where measurements are required, this tape measure will do the job every time. Always be in a balanced and stable position while using hand tools Keep tools clean to prevent slippage and possible injury Never expose tools to excessive heat, this could alter the temper and ruin the tool

EUR 14.74

1

EVT Magnolia Neutral Silicone 300ml

EVT Prime Colours may be used for sealing construction joints on most surfaces. Suitable for perimeter sealing of uPVC window frames, conservatories, coated wood, aluminium, metal, concrete, plaster and sanitary applications. For interior and exterior use EVT Prime Colours cures upon reaction with moisture, remains permanently elastic, is non-ageing, contains biocide, is durable and non-paintable. An application test is recommended prior to use. Do not use on natural stone. Use EVT Natural St

EUR 8.01

1

KR6/27 27mm Shot Fire Nails To Suit EXP88/DX450 (Box 100)

This nail is for use in concrete. The length of nail to use should be the thickness of the material to be fixed PLUS: Concrete: 25 - 32 mm penetration

EUR 7.42

1

Craft saw blade aluminium and plastic 215mm x 64 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 65.27

1

Craft saw blade aluminium and plastic 300 x 96 teeth x 30

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 92.63

1

Craft saw blade aluminium and plastic 184 x 58 teeth x 16

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 44.21

1

Craft saw blade aluminium and plastic 160 x 52 teeth x 20

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 60.77

1

Craft saw blade aluminium and plastic 250mm x 84 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 78.60

1

Craft saw blade aluminium and plastic 216mm x 64 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 61.75

1

Craft saw blade aluminium and plastic 165 x 48 teeth x 20

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 42.80

1

Craft saw blade aluminium and plastic 190 x 60 teeth x 30

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 49.13

1

Craft saw blade aluminium and plastic 305mm x 84 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 79.30

1

50mm Countersunk Wing Drill Screw Light Section (Box 100)

self-drilling tek screws are specifically designed for fixing timber to metal substrates of up to 12mm thick. No need to pre-drill thanks to the sharp drill point, however for very hard substrates a small pilot hole can be used to speed up insertion speed.

EUR 9.83

1

85mm Countersunk Wing Drill Screw Light Section(Box 100)

self-drilling tek screws are specifically designed for fixing timber to metal substrates of up to 12mm thick. No need to pre-drill thanks to the sharp drill point, however for very hard substrates a small pilot hole can be used to speed up insertion speed.

EUR 14.46

1

Craft saw blade 184mm x 30 teeth x 16mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality.

EUR 34.38

1

Craft saw blade crosscut 250mm x 24 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy

EUR 47.02

1

Craft saw blade 140mm x 24 teeth x 20mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality.

EUR 30.73

1

Craft saw blade 230mm x 40 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality.

EUR 45.96

1

Craft saw blade 180mm x 40 teeth x 30mm

Sawblades designed for a professional finish in particle board, boards veneered both sides, plywood MDF, chipboard laminated one-sided, veneer and hardboard. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision

EUR 35.78

1

Craft saw blade crosscut 250mm x 42 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy

EUR 50.52

1

Craft saw blade 130mm x 24 teeth x 20mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality.

EUR 31.04

1

Brand

Merchant

Price (EUR)

T Gas To Suit IM350

55013 Yellow Gas to Suit IM250

Timber to Timber Joist Hanger 50mm

Timber to Timber Joist Hanger 38mm

Stanley 8 Metre Measuring Tape

EVT Magnolia Neutral Silicone 300ml

KR6/27 27mm Shot Fire Nails To Suit EXP88/DX450 (Box 100)

Craft saw blade aluminium and plastic 215mm x 64 teeth x 30mm

Craft saw blade aluminium and plastic 300 x 96 teeth x 30

Craft saw blade aluminium and plastic 184 x 58 teeth x 16

Craft saw blade aluminium and plastic 160 x 52 teeth x 20

Craft saw blade aluminium and plastic 250mm x 84 teeth x 30mm

Craft saw blade aluminium and plastic 216mm x 64 teeth x 30mm

Craft saw blade aluminium and plastic 165 x 48 teeth x 20

Craft saw blade aluminium and plastic 190 x 60 teeth x 30

Craft saw blade aluminium and plastic 305mm x 84 teeth x 30mm

50mm Countersunk Wing Drill Screw Light Section (Box 100)

85mm Countersunk Wing Drill Screw Light Section(Box 100)

Craft saw blade 184mm x 30 teeth x 16mm

Craft saw blade crosscut 250mm x 24 teeth x 30mm

Craft saw blade 140mm x 24 teeth x 20mm

Craft saw blade 230mm x 40 teeth x 30mm

Craft saw blade 180mm x 40 teeth x 30mm

Craft saw blade crosscut 250mm x 42 teeth x 30mm

Craft saw blade 130mm x 24 teeth x 20mm

Powered by Cobiro