794 results (0,22900 seconds)

Show all filters

Brand

Show all

Colour

Size

Show all

Gender

Merchant

Show all

Price (EUR)

Reset filter

Products
From
Shops

Lista Drawer Division Material, Pack Of 5, For Drawer Height 150mm, Divider, Length 255mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 150mm, Divider, Length 255mm

Drawer division material, pack of 5, for drawer height 150 mm, divider, length 255 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 255 mm. For drawer height = 150 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 39.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Divider, Width 170mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Divider, Width 170mm

Drawer division material, pack of 5, for drawer height 75 mm, divider, width 170 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 170 mm. For drawer height = 75 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 26.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Divider, Width 119mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Divider, Width 119mm

Drawer division material, pack of 5, for drawer height 75 mm, divider, width 119 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 119 mm. For drawer height = 75 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 26.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Divider, Width 85mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Divider, Width 85mm

Drawer division material, pack of 5, for drawer height 75 mm, divider, width 85 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 85 mm. For drawer height = 75 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 24.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 150mm, Divider, Length 119mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 150mm, Divider, Length 119mm

Drawer division material, pack of 5, for drawer height 150 mm, divider, length 119 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 119 mm. For drawer height = 150 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 26.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 153mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 153mm

Drawer division material, pack of 5, for drawer height 50 mm, divider, length 153 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 153 mm. For drawer height = 50 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 26.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 170mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 170mm

Drawer division material, pack of 5, for drawer height 50 mm, divider, length 170 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 170 mm. For drawer height = 50 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 25.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 150mm, Divider, Length 102mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 150mm, Divider, Length 102mm

Drawer division material, pack of 5, for drawer height 150 mm, divider, length 102 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 102 mm. For drawer height = 150 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 26.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 102mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 102mm

Drawer division material, pack of 5, for drawer height 50 mm, divider, length 102 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 102 mm. For drawer height = 50 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 29.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 150mm, Divider, Length 170mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 150mm, Divider, Length 170mm

Drawer division material, pack of 5, for drawer height 150 mm, divider, length 170 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 170 mm. For drawer height = 150 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 35.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 250mm, Divider, Length 153mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 250mm, Divider, Length 153mm

Drawer division material, pack of 5, for drawer height 250 mm, divider, length 153 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 153 mm. For drawer height = 250 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 39.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 200mm, Divider, Length 136mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 200mm, Divider, Length 136mm

Drawer division material, pack of 5, for drawer height 200 mm, divider, length 136 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 136 mm. For drawer height = 200 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 35.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 306mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 306mm

Drawer division material, pack of 5, for drawer height 50 mm, divider, length 306 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 306 mm. For drawer height = 50 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 35.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 200mm, Divider, Length 119mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 200mm, Divider, Length 119mm

Drawer division material, pack of 5, for drawer height 200 mm, divider, length 119 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 119 mm. For drawer height = 200 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 35.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 150mm, Divider, Length 204mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 150mm, Divider, Length 204mm

Drawer division material, pack of 5, for drawer height 150 mm, divider, length 204 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 204 mm. For drawer height = 150 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 35.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Divider, Width 306mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Divider, Width 306mm

Drawer division material, pack of 5, for drawer height 75 mm, divider, width 306 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 306 mm. For drawer height = 75 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 35.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 255mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 255mm

Drawer division material, pack of 5, for drawer height 50 mm, divider, length 255 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 255 mm. For drawer height = 50 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 35.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Divider, Width 102mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 75mm, Divider, Width 102mm

Drawer division material, pack of 5, for drawer height 75 mm, divider, width 102 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 102 mm. For drawer height = 75 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 30.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 136mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 136mm

Drawer division material, pack of 5, for drawer height 50 mm, divider, length 136 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 136 mm. For drawer height = 50 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 26.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 200mm, Divider, Length 170mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 200mm, Divider, Length 170mm

Drawer division material, pack of 5, for drawer height 200 mm, divider, length 170 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 170 mm. For drawer height = 200 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 39.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 51mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 51mm

Drawer division material, pack of 5, for drawer height 50 mm, divider, length 51 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 51 mm. For drawer height = 50 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 18.99
1

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 204mm

Lista Drawer Division Material, Pack Of 5, For Drawer Height 50mm, Divider, Length 204mm

Drawer division material, pack of 5, for drawer height 50 mm, divider, length 204 mm. Supplied = flat pack. Material = sheet steel. Colour = grey. Width = 204 mm. For drawer height = 50 mm. Model = partition. Product type = accessories. Slotted panels, with slots on both sides: for lengthwise division of the drawers in combination with the dividers. Same slot pattern as the drawer panels in units of 17 mm. The lower edging allows the slotted panels to be bolted to the perforated drawer base. Made of sheet steel, including bolting material. Colour: grey, NCS S 4502-B. Dividers: in combination with the slotted panels, they make any type of exact drawer division possible. The labelling field is offset across the full width, and is used for holding labelling tabs or barcode supports (see below) The lower front-facing edging allows the dividers to be bolted to the perforated drawer base. The dimensions are punched into every divider. Made of aluminium.

GBP 26.99
1