59 results (0,14625 seconds)

Show all filters

Brand

Colour

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Watco Heavy Duty Traffic Paint Light Grey, 4L

Watco Heavy Duty Traffic Paint Light Grey, 4L

Images for illustration purposes onlyWatco Heavy Duty Traffic Paint is a tough, two pack, solvent based epoxy resin coating for use in heavily trafficked concrete or asphalt, such as car parks, driveways and vehicle access areas.This versatile, exceptionally strong coating contains a solvent which bites into asphalt surfaces, and slightly penetrates concrete surfaces for the maximum possible adhesion without the need (generally) for a primer. Heavy Duty Traffic Paint carries CE Mark EN 1504-2 and has impressive test results for slip resistance, hardness, abrasion, adhesion and impact resistance.The high pigment level in this smooth finish exterior coating offers excellent covering power to keep your surfaces looking their best for longer. For areas where safety underfoot is required, Heavy Duty Anti Slip Traffic Paint is also available.Recommended areas of useCar parksDrivewaysTraffic routes and pedestrian walkwaysVehicle access areasColour coding and highlighting hazardous areasFeaturesExceptionally strong, two pack, solvent based epoxy resinTransforms, dull, drab asphalt, tarmac and concrete in heavy wear areasColours and protects with just one coatHigh pigment level offers excellent hiding powerSuitable for both asphalt and concreteExcellent chemical resistanceSuperior performance demonstrated by ISO testing to CE Mark EN1504-2Drying Time Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 12 hours 6 hours 16 hours 36 hours 7 days20C 6 hours 4 hours 8 hours 24 hours 7 days30C 6 hours 3 hour 8 hours 24 hours 7 daysLight Traffic: FootMedium Traffic: Cars, trolley, pallet truck

GBP 199.99
1

Watco Epoxy Resin Floor Paint Light Grey, 5L

Watco Epoxy Resin Floor Paint Light Grey, 5L

Images for illustration purposes onlyWatco Basics Epoxy Floor Paint is a durable two-part paint suitable for medium to heavy use. It can be applied over existing well bonded paint, or onto bare concrete where it will penetrate the surface making it easier to keep clean. A separate unit of aggregate is supplied with Anti Slip Epoxy Resin Floor Paint, which is mixed into the paint to provide a finely textured slip resistant surface. Two roller applied coats will take heavy traffic including forklifts.Recommended areas of useConcrete floors in warehousesProduction areasGaragesShowrooms

GBP 133.99
1

Watco Anti Slip Epoxy Resin Floor Paint Light Grey, 5L

Watco Anti Slip Epoxy Resin Floor Paint Light Grey, 5L

Images for illustration purposes onlyWatco Basics Anti Slip Epoxy Resin Floor Paint is a durable two-part paint suitable for medium to heavy use. It can be applied over existing well bonded paint, or onto bare concrete where it will penetrate the surface making it easier to keep clean. A separate unit of aggregate is supplied with Anti Slip Epoxy Resin Floor Paint, which is mixed into the paint to provide a finely textured slip resistant surface. Two roller applied coats will take heavy traffic including forklifts.Recommended areas of useConcrete floors in warehousesProduction areasGaragesShowrooms

GBP 139.99
1

Watco Epoxy Resin Floor Paint Light Grey, 2.5L

Watco Epoxy Resin Floor Paint Light Grey, 2.5L

Images for illustration purposes onlyWatco Basics Epoxy Floor Paint is a durable two-part paint suitable for medium to heavy use. It can be applied over existing well bonded paint, or onto bare concrete where it will penetrate the surface making it easier to keep clean. A separate unit of aggregate is supplied with Anti Slip Epoxy Resin Floor Paint, which is mixed into the paint to provide a finely textured slip resistant surface. Two roller applied coats will take heavy traffic including forklifts.Recommended areas of useConcrete floors in warehousesProduction areasGaragesShowrooms

GBP 79.99
1

Watco Anti Slip Epoxy Resin Floor Paint Light Grey, 2.5L

Watco Anti Slip Epoxy Resin Floor Paint Light Grey, 2.5L

Images for illustration purposes onlyWatco Basics Anti Slip Epoxy Resin Floor Paint is a durable two-part paint suitable for medium to heavy use. It can be applied over existing well bonded paint, or onto bare concrete where it will penetrate the surface making it easier to keep clean. A separate unit of aggregate is supplied with Anti Slip Epoxy Resin Floor Paint, which is mixed into the paint to provide a finely textured slip resistant surface. Two roller applied coats will take heavy traffic including forklifts.Recommended areas of useConcrete floors in warehousesProduction areasGaragesShowrooms

GBP 79.99
1

6x Watco Concrex Coloured Cold Set Light Grey 10KG CXCCLGY10

6x Watco Concrex Coloured Cold Set Light Grey 10KG CXCCLGY10

Images for illustration purposes onlyConcrex Colours Cold Set has the same features as the traditional Concrex with the added benefit the ability to cure in low temperatures and a variety of colours to choose from. Ideal for winter use and cold room conditions. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesHeavy duty, two part epoxy resin mortarRange of colours to blend with existing coloured floorsVirtually indestructible Good chemical resistanceResin rich for thin section and feather-edge repairsSuitable for heavy trafficEasy to apply. Takes heavy traffic after 12-16 hours at 20CCoverage 1.2m per 10kg at 5mm thick

GBP 983.94
1

Watco Concrex Coloured Cold Set Light Grey 10KG

Watco Concrex Coloured Cold Set Light Grey 10KG

Images for illustration purposes onlyConcrex Colours Cold Set has the same features as the traditional Concrex with the added benefit the ability to cure in low temperatures and a variety of colours to choose from. Ideal for winter use and cold room conditions. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesHeavy duty, two part epoxy resin mortarRange of colours to blend with existing coloured floorsVirtually indestructible Good chemical resistanceResin rich for thin section and feather-edge repairsSuitable for heavy trafficEasy to apply. Takes heavy traffic after 12-16 hours at 20CCoverage 1.2m per 10kg at 5mm thick

GBP 179.99
1

Watco Concrex Coloured Cold Set Light Grey 25KG

Watco Concrex Coloured Cold Set Light Grey 25KG

Images for illustration purposes onlyConcrex Colours Cold Set has the same features as the traditional Concrex with the added benefit the ability to cure in low temperatures and a variety of colours to choose from. Ideal for winter use and cold room conditions. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesHeavy duty, two part epoxy resin mortarRange of colours to blend with existing coloured floorsVirtually indestructible Good chemical resistanceResin rich for thin section and feather-edge repairsSuitable for heavy trafficEasy to apply. Takes heavy traffic after 12-16 hours at 20CCoverage 1.2m per 10kg at 5mm thick

GBP 349.99
1

6x Watco Concrex Coloured Cold Set Light Grey 25KG CXCCLGY25

6x Watco Concrex Coloured Cold Set Light Grey 25KG CXCCLGY25

Images for illustration purposes onlyConcrex Colours Cold Set has the same features as the traditional Concrex with the added benefit the ability to cure in low temperatures and a variety of colours to choose from. Ideal for winter use and cold room conditions. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesHeavy duty, two part epoxy resin mortarRange of colours to blend with existing coloured floorsVirtually indestructible Good chemical resistanceResin rich for thin section and feather-edge repairsSuitable for heavy trafficEasy to apply. Takes heavy traffic after 12-16 hours at 20CCoverage 1.2m per 10kg at 5mm thick

GBP 1859.94
1

6x Watco Safety Grip Light Grey 5m2 Sglg

6x Watco Safety Grip Light Grey 5m2 Sglg

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 1079.94
1

Watco Safety Grip Light Grey 5m2

Watco Safety Grip Light Grey 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 199.99
1

Watco Epoxy Matt Coat Light Grey

Watco Epoxy Matt Coat Light Grey

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 249.99
1

Watco Safety Coat Hygienic Light Grey

Watco Safety Coat Hygienic Light Grey

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Safety Coat Hygienic incorporates Silver Ion technology and is ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 299.99
1

6x Watco Epoxy Matt Coat Light Grey EMCBEFRAL7035

6x Watco Epoxy Matt Coat Light Grey EMCBEFRAL7035

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1379.94
1

6x Watco Safety Coat Hygienic Light Grey SCOATHYGBEFRAL7035

6x Watco Safety Coat Hygienic Light Grey SCOATHYGBEFRAL7035

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Safety Coat Hygienic incorporates Silver Ion technology and is ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1619.94
1

Watco Epoxy Gloss Coat Light Grey

Watco Epoxy Gloss Coat Light Grey

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 219.99
1

6x Watco Epoxy Gloss Coat Light Grey EGCBEFRAL7035

6x Watco Epoxy Gloss Coat Light Grey EGCBEFRAL7035

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1199.94
1

6x Watco Safety Grip Cold Cure Light Grey 5m2 Sgcclgy

6x Watco Safety Grip Cold Cure Light Grey 5m2 Sgcclgy

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 1199.94
1

Watco Safety Grip Cold Cure Light Grey 5m2

Watco Safety Grip Cold Cure Light Grey 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 214.99
1

6x Watco Epoxy Gloss Coat Hygienic Light Grey EGCHYGBEFRAL7035

6x Watco Epoxy Gloss Coat Hygienic Light Grey EGCHYGBEFRAL7035

Images for illustration purposes onlyWatco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1379.94
1

Watco Epoxy Gloss Coat Hygienic Light Grey RAL 7500

Watco Epoxy Gloss Coat Hygienic Light Grey RAL 7500

Images for illustration purposes onlyWatco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 259.99
1

Watco Epoxy Gloss Coat Hygienic Light Grey

Watco Epoxy Gloss Coat Hygienic Light Grey

Images for illustration purposes onlyWatco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 259.99
1