Pricemate

X-ER 230v LED Mains Weatherproof Luminaire

X-ER 230v LED Mains Weatherproof LuminaireThe X-ER is a quality luminaire for areas of general amenity lighting. This luminaire offers a cost-effective emergency lighting and mains lighting combination and is ideal for areas where higher light levels are required.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP65DALI and Self-Test optionsCentral Battery and Static inverter systemsBlack base finish optionPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 87.05

1

X-HR 230v Mains Weatherproof Diecast Luminaire

X-HR 230v Mains Weatherproof Diecast LuminaireThe X-HR Light is anarchitectural luminaire suitable for prestigious exterior applications. Manufactured from a die cast aluminium base and grill with an injection moulded polycarbonate opal diffuser. The diffuser is held in place by captive screws with a silicone rubber gasket to provide the seal. The X-HR Light offers an effective solution to combine emergency lighting and mains lighting.Key FeaturesHigh lumen outputOpal polycarbonate diffuser4000k Colour temperatureIP65Please Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 138.13

1

X-ERS LED 230v Mains Square Weatherproof Luminaire

X-ERS LED 230v Mains Square Weatherproof LuminaireA quality decorative luminaire designed for use by architects and designers. Comprising of a moulded self-extinguishing polycarbonate base fitted with a clear diffuser suitable for use on escape routes. The X-ERS Light offers a cost-effective emergency lighting and mains lighting combination and is ideal for areas where higher light levels are required.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP65DALI and Self-Test optionsCentral Battery and Static inverter systemsBlack base finish optionPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 87.05

1

X-ES LED 230v Mains Exit Box

X-ES LED 230v Mains Exit BoxThe X-ES Light is a general purpose LED wall mounted emergency escape route sign.Comprising a white stove-enamelled zintec-coated sheet steel base and fitted with a self-extinguishing legend panel the X-ES Light is designed for use on escape routes. It conforms to the 850C hot-wire test as defined by ICEL.The X-ES Light has cable knockouts which are provided in the sides and the top.Key FeaturesIP20 Interior UseEscape Route SignHigh Output LED Light SourceChoice of LegendColour Options and Brass or Chrome VersionsSelf-Contained34m Viewing DistancePlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard exit sign.

GBP 92.68

1

X-SR LED 230v Mains Anti-Ligature Luminaire

X-SR LED 230v Mains Anti-Ligature LuminaireThe X-SR Light is a circular anti ligature vandal resistant luminaire suitable for interior environments.Comprising of spun aluminium housing with a polycarbonate opal diffuser suitable for use on escape routes 850 C Hot-Wire test defined by ICEL. The diffuser is held in place by a security screw fixed rim which fits flush to the ceiling. The X-SR Light offers aneffective solution for harsh environmentswhere both mains and emergency lighting is required.Key FeaturesAnti-ligatureHigh lumen outputLow power consumption4000k Colour temperatureIP40DALI and Self-Test optionsCentral Battery and Static inverter systemsPowder coated aluminium spinningPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 198.23

1

X-ESW LED 230v Mains Weatherproof Exit Box

X-ESW LED 230v Mains Weatherproof Exit BoxThe X-ESW Light is a hard wearing waterproof wall mounted emergency escape route sign.Comprising of a GRP and polycarbonate IP65 weatherproof enclosure fitted with a self-extinguishing legend panel the X-ESW Light is designed for use on escape routes. The X-ESW Light can be fitted with legends complying with the Health and Safety signs Directive of 1996 a number of special bespoke legends are available. With flexibility in mind choose from a wide number of alternative configurations are possible.Key FeaturesEscape route signSurface wall mountHigh output LED light sourceIP65Choice of LegendSelf containedPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard exit sign.

GBP 132.97

1

X-ESP LED 230v Mains Weatherproof Double Sided Exit Sign

X-ESP LED 230v Mains Weatherproof Double Sided Exit SignThe X-ESP Light is an IP65 ceiling mounted emergency escape route sign thats suitable for exterior and interior use.An IP65 ceiling mounted exit sign the X-ESP provides you with a single or double sided exit sign making it versatile andsuitable for all escape routes including final exits and intersections. The X-ESP Light is manufactured in white polycarbonate has cable knock outs which are provided in the sides and a BESA entry in the base. An optional recessing kit is available.Key FeaturesEscape route signDouble sidedHigh output LED light sourceIP65Choice of LegendSelf-containedSwitchable maintained unitPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard exit sign.

GBP 113.02

1

X-MP LED 230v Mains Hanging Blade Exit Sign

X-MP LED 230v Mains Hanging Blade Exit SignThe X-MP Light is a decorativechain suspended edge-illuminated escape route and direction sign.Comprising a white finished base and suspended gear enclosure on chrome chain the X-MP Light is fitted with a BS7010 legend panel. The unit is designed for chain suspension and a chrome effect chain is provided. Cable entry is by a BESA entry in the base.The X-MP Light is white as standard and is also available in alternative finishes including British Standard RAL colour black polished brass chrome and satin finishes.Key FeaturesChain Suspended 400mm dropSurface mountHigh output LED light sourceIP20Chrome and white finishes availableChoice of LegendSwitchable maintained unitDALI and Self-Test optionsAlternative colour and finishes availablePlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard exit sign.

GBP 161.16

1

X-MPR LED 230v Mains Blade Exit Sign

X-MPR LED 230v Mains Blade Exit SignA compact recessed exit sign.TheX-MPRis a decorative illuminated escape route and direction sign light. Using high illumination white LEDs in a small compact shell with self-test facility. It is designed to be recess mounted in ceilings allowing escape route lighting to be provided in a low profile.Comprising of a stove enamelled sheet steel base fitted with a white bezel suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL. The bezel is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base.Key FeaturesRecess mount escape route signHigh output LED light sourceIP20Many alternative finishes availableChoice of LegendSelf containedPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard exit sign.

GBP 115.48

1

X-XLP LED 230v Mains Decorative Luminaire

X-XLP LED 230v Mains Decorative LuminaireA quality decorative LED luminaire with sympathetic looks to please architects and designers the X-XLP demonstrates that mains and emergency LED lighting need no longer be a compromise.Comprising of a high quality polycarbonate enclosure with asteel gear tray and an elegantly shaped polycarbonate opal or prismatic diffuser suitable for use on escape routes 850 hot-wire test defined by ICEL. The X-XLP Light is designed for use in mains and emergency modes with instant on light. The diffuser is snap fitted via three locating lugs and provides a seal to IP20. A BESA entry is provided in the base with two 20mm conduit entries.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP20DALI and Self-Test optionsCentral Battery and Static inverter systemsAdditional trims to enhance individualityPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 83.95

1

X-ESD LED 230v Mains Slimline Double Sided Exit Sign

This product is no longer available as chrome but comes in white as standard. Please contact us for pricing.X-ESD LED 230v Mains Slimline Double Sided Exit SignThe X-ESD light is designer interior emergency escape route sign with the added advantage of being able to fit inapplications that arerestricted by low ceiling heightA range of slimline exit signs suitable for incorporation into aesthetically pleasing interior environments where ceiling height is an important factor. Designed to be either wall or ceiling mounted abovedoorways where there is limited ceiling height manufactured from sheet steel with a polycarbonate exit sign. Complying with the requirements of EN60598-2-22 and conforms to the 850 C hot-wire test as defined by ICEL.Key FeaturesWall mount as standardEscape route signDown-light facilityHigh output LED light sourceIP20Chrome as standardChoice of LegendSelf-containedSwitchable maintained unitPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard exit sign.

GBP 123.02

1

X-CS3 LED 230v Mains LED IP65 Bulkhead

X-CS3 LED 230v Mains LED IP65 BulkheadThe X-CSL3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal ExternalPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 66.53

1

X-MRD LED 3W 230v Mains Recessed Spotlight

X-MRD LED 3W 230v Mains Recessed SpotlightThe innovative LED emergency downlighter uses one high-illumination white LED in 50mm diameter housing.It is extremely discreet and is available in either white or silver. Its high output light source together with its low power consumption means we can use a smaller battery pack giving greater energy efficiency.This discreet recessed downlight is a complete and easy solution for LED emergency applications. Available with a 3 watt LED the X-MRDrange is designed to be used as a standalone unit that is passed through a 40mm cut out. Consisting of a module battery pack and LED unit these components fit together with the non-reversible connectors and are simply passed through the cut out into the void above. This unit is the ultimate in concealed emergency lighting and suitable for incorporation into an emergency lighting system.Key FeaturesNon-MaintainedRecess or Surface MountedWhite High Output LED light sourceStatus Indicator LEDOpen Area or Corridor LensPlease look in the Datasheet section to find images of the Open Area Corridor the Surface versions of this Downlight.Please Note Although listed under Emergency Lighting this product isnt one and should be used as a standard LED Downlight.

GBP 86.39

1

X-ESC LED 230v Mains Curved Exit Sign

X-ESC LED 230v Mains Curved Exit SignThe X-ESC Light is an attractively designed wall mounted emergency escape route sign. The convex front and perforated down light section make for an eye-catching alternative. With additional self-testing features to ensure that routine monthly and yearly tests are never missed.Comprising a white stove-enamelled zintec-coated sheet steel base and fitted with a self-extinguishing legend panel the ESS Light is designed for use on escape routes and final exits. It conforms to the 850C hot-wire test as defined by ICEL. The X-ESC Light has a 20mm cable knockout to the back. The X-ESC can be fitted with many different legends. With flexibility in mind theres a comprehensive choice of alternative finishes including any British Standard or RAL colour.Key FeaturesBright white LED light sourceIP20 interior useDual operating unitChrome and brass options availableDown light facilityRange of ISO 70102011 legends available30 M viewing distancePlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard exit sign.

GBP 113.57

1

X-MRD LED 3W 110v Recessed Spotlight

X-MRD LED 3W 110v Recessed SpotlightThe innovative LED emergency downlighter uses one high-illumination white LED in 50mm diameter housing.It is extremely discreet and is available in either white or silver. Its high output light source together with its low power consumption means we can use a smaller battery pack giving greater energy efficiency.This discreet recessed downlight is a complete and easy solution for LED emergency applications. Available with a 3 watt LED the X-MRDrange is designed to be used as a standalone unit that is passed through a 40mm cut out. Consisting of a module battery pack and LED unit these components fit together with the non-reversible connectors and are simply passed through the cut out into the void above. This unit is the ultimate in concealed emergency lighting and suitable for incorporation into an emergency lighting system.Key FeaturesNon-MaintainedRecess or Surface MountedWhite High Output LED light sourceStatus Indicator LEDOpen Area or Corridor LensPlease look in the Datasheet section to find images of the Open Area Corridor the Surface versions of this Downlight.Please Note Although listen under Emergency Lighting this product isnt one and should be used as a standard LED Downlight.

GBP 107.27

1

X-FM LED 230v Mains Recessed Luminaire

X-FM LED 230v Mains Recessed LuminaireThe X-FM Light is designed for fullrecess-mounting in ceilings with only 10mm protrusion. The X-FM Light is perfect for maintaining a low profile while providing the essential protection required by legislation.Comprising a stove-enamelled sheet steel base fitted with a clear prismatic diffuser retained by a white bezel the X-FM Light is designed for use on escape routes. It passes the 850C hot-wire test as defined by ICEL.The diffuser is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base. The X-FML Light is available in white or a number of alternative finishes including British Standard RAL colour brass chrome and satin with an opal diffuser option.Key FeaturesSelf-Test 3hr durationHinged gear trayRecess mountWhite high output LED light sourceIP20 ingress protectionPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 103.58

1

Brand

Merchant

Price (EUR)