Pricemate

C-Tec FF516M MFP16 16-28 Zone Main Motherboard

C-Tec FF516M MFP16 16-28 Zone Main MotherboardThe FF516M is an MFP16 16-28 Zone Main Motherboard.

GBP 185.29

1

C-Tec XFP510-16 XFP Repeater Panel 16 Zone

C-Tec XFP510-16 XFP Repeater Panel 16 ZoneCan be used to repeat the functions of an XFP Main panel at remote parts of a site e.g. all potential fire service entrances. Offers all of the functions and controls of an XFP Main panel access levels 1 2 and 3. Includes an on-board fault relay. Requires its own dedicated Mains power and battery back-up supply.A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel. Communication between the XFP Main panel and Repeater requires a CFP761 network driver card fitted as standard in all XFP510-16s available as an optional extra on Main XFP 16 Zone panels. Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.Key FeaturesCan be used to repeat the functions of an XFP Main panel at remote parts of a site e.g. all potential fire service entrances.Offers all of the functions and controls of an XFP Main panel access levels 1 2 and 3.Includes an on-board fault relay.Requires its own dedicated Mains power and battery back-up supply.A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel.Communication between the XFP Main panel and Repeater requires a CFP761 network driver card fitted as standard in all XFP510-16s available as an optional extra on Main XFP 16 Zone panels.Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.

GBP 315.26

1

C-Tec 16 Line SigTEL Master Controller cw handset. Max 2 x 7Ah batteries ECU-16

C-Tec 16 Line SigTEL Master Controller cw handset. Max 2 x 7Ah batteries ECU-16Designed foruse with our popular SigTEL system the ECU-16 features a new-look high-performance handset to allow operators tocommunicate with up to 16 disabled refuge or firetelephone systems.The controllers powerful networking capabilities also allow up to 14ECU-16 mastercontrollers to be interlinked to create systems of up to224 lines. A separate ECU-224desk control unit can also be connectedtoallow communication with up to 224outstations from a single point.Compatible with C-TECs entire range of Type A Fire Telephone andType B Disabled Refugeoutstations and remote fire telephonehandsets the controller can be easilyinterfaced to NC951 accessibletoilet alarms PDA hearing loop systems strobesCCTV activation relaysand more.Key FeaturesA new 16-line Master Controller for use with our SigTEL disabled refuge fire telephone and stadium marshallingsystem.Allows operators to communicate with up to four disabled refuge or fire telephone outstations.Includes an attractive semi-recessed handset.Improved SigTEL networking capability allow systems of up to 224 lines to be created with optionaladditional desk unit control.Backlit LCD and unique auto-learn facility allows fast system set up.Can be semi-flush mounted using an AFP385 bezel.Operation can be maintained for 24 hours standby and 3 hours in use using 2 x 12V 7 Ahr batteries.Easily interfaced to NC951 accessible toilet alarms PDA range hearingloop systems strobes CCTV activation relays etc.

GBP 1906.25

1

C-Tec SAP501EX SAP 1 Loop 16 Zone Addressable Sprinkler Monitoring Panel

C-Tec SAP501EX SAP 1 Loop 16 Zone Addressable Sprinkler Monitoring PanelIdeal for monitoring up to 126 sprinkler flow switches.One switch monitoring unit required per monitored flow switch.Utilises the same technology asC-TECspopular XFP addressable fire panel.Up to 16 sprinkler zone indicators availableassignable via the panels PC programming tools.Attractiveflush or surface mountable plastic enclosure.Combined keypad or keyswitch entry.

GBP 455.02

1

C-Tec Z14 ZFP 16 Input Output PCB Full Size

C-TecZ14ZFP 16 Input Output PCB Full Size16-Way Input Output PCB designed to enhance the functionality of a ZFP addressable fire panel. Provides 16 monitored swich inputsopen collector outputs dependent on wiring configuration used.Key FeaturesFull size PCB can be scored in the middle to produce a half size 8 Input Output PCBProgrammable via the ZFPs PC ToolsPolling power and separate InputOutput Activated LED indicatorsUp to 15 A-BUS Expansion PCBs can be connected to a ZFP Panel via its RS485 A-BUS networkTypically installed within the ZFP panel but can work up to 1 KM away for non-EN 54-2 functions

GBP 271.08

1

C-Tec XFP761 XFP Network Card For 16 Zone Panels

C-Tec XFP761 XFP Network Card For 16 Zone PanelsThe XFP network card allows for the connection of up to eight mainpanels any mix over a two-wire RS485 network spanning up to 1KM. Eachnetworked XFP panel can be programmed to receive fire alerts faults andcontrol commands such as silencing alarm sounders and resetting controlpanels from other connected panels.Key FeaturesCan be used to connect up to 8 XFP repeaters any mix toone XFP main panelUp to 500m of cable may be fitted to an XFP two-wirerepeater networkEach XFP repeater offers all the functions and controls ofan XFP main panelThe XFP main panel must have a network communication cardfittedIt is not possible to mix XFP main panels and XFP repeaterson the same networkOne XFP761 required per networked Main XFP Single Loop 16Zone fire panel note that XFP510-16 and XFP510-32 repeaters include a networkdriver card as standardThe XFP761 is NOT compatible with XFP 12 Loop32 Zone fire panels which require an AFP711 card for networking

GBP 74.52

1

C-Tec XFP501EH XFP Addressable Single Loop 16 Zone Panel - Hochiki Protocol

C-Tec XFP501EH XFP Addressable Single Loop 16 Zone Panel - Hochiki ProtocolC-TECs XFP single loop 16 zoneaddressable fire alarm panel offers high performance at a very competitive price. LPCBcertified to EN54 parts 2 4 it is supplied in an attractiveflush or surface mountable plastic enclosure offers combined keypad or keyswitch entry to Access Levels 2 and 3 and is compatible with Apollos XP95Discovery protocol.Ideal for use in small stand-alone applications orin larger applications dueto its ability to sit on network of up to 8 XFP master panelsit is one of Europes best-selling entry-level addressable fire panels. Packed full of engineering features-some of which are not available on more expensive alternativessee feature list below-the XFP501EX is also fully compatible with C-TECs Hush Button fire alarm solution and its new range of EN54 certified addressable sounders and VADs.Key FeaturesThird-party certified to EN54-24 by the Loss Prevention Certification Board LPCB.Compatibility with Apollos XP95Discovery protocol.Two independently programmable conventional sounder circuits.Two programmable inputs.A fault output relay and three programmable relay outputs with voltage free changeover contacts.A selection of zone dependencycoincidence functions.A daynight building occupiedunoccupied function.An investigation delay period function.Phased evacuation facility.An alarm counter that records how many times the panel has been in alarm state.Powerful short circuit protected loop drivers capable of supporting up to 40 loop powered 10mA sounders per loop.An integral EN54-4A2 switch mode power supply.Adjustable contamination levels.Earth fault monitoring.Combined keypad keyswitch entry to Access Levels 2 and 3.999 event monitoring.An intuitive Windows based upload-download PC program.Up to eight XFP main panels any variant can be connected onto a two-wire RS485 network. Alternatively up to eight XFP repeaters can be connected to any non-networked main panel.

GBP 467.00

1

C-Tec XFP501EX XFP Addressable Single Loop 16 Zone Panel - Apollo XP95 Discovery Protocol

C-Tec XFP501EX XFP Addressable Single Loop 16 Zone Panel - XP95 Discovery ProtocolC-TECs XFP single loop 16 zoneaddressable fire alarm panel offers high performance at a very competitive price. LPCBcertified to EN54 parts 2 4 it is supplied in an attractiveflush or surface mountable plastic enclosure offers combined keypad or keyswitch entry to Access Levels 2 and 3 and is compatible with Apollos XP95Discovery protocol.Ideal for use in small stand-alone applications orin larger applications dueto its ability to sit on network of up to 8 XFP master panelsit is one of Europes best-selling entry-level addressable fire panels. Packed full of engineering features-some of which are not available on more expensive alternativessee feature list below-the XFP501EX is also fully compatible with C-TECs Hush Button fire alarm solution and its new range of EN54 certified addressable sounders and VADs.Key FeaturesThird-party certified to EN54-24 by the Loss Prevention Certification Board LPCB.Compatibility with Apollos XP95Discovery protocol.Two independently programmable conventional sounder circuits.Two programmable inputs.A fault output relay and three programmable relay outputs with voltage free changeover contacts.A selection of zone dependencycoincidence functions.A daynight building occupiedunoccupied function.An investigation delay period function.Phased evacuation facility.An alarm counter that records how many times the panel has been in alarm state.Powerful short circuit protected loop drivers capable of supporting up to 40 loop powered 10mA sounders per loop.An integral EN54-4A2 switch mode power supply.Adjustable contamination levels.Earth fault monitoring.Combined keypad keyswitch entry to Access Levels 2 and 3.999 event monitoring.An intuitive Windows based upload-download PC program.Up to eight XFP main panels any variant can be connected onto a two-wire RS485 network. Alternatively up to eight XFP repeaters can be connected to any non-networked main panel.

GBP 467.00

1

C-Tec NC885 Standard 51 Input Expander

C-Tec NC885 Standard 51 Input Expander -used to provide areazonal indicationInput expanders are used to give area indication and have five inputs and one output which can operate overdoor lights interface modules or zone indicators on a panel in another part of the building. The outputs of several input expanders can be connected together. Fix by self-adhesive pad.Key FeaturesSize53mm x 25mm x 20mm

GBP 27.98

1

C-Tec BF3593M Flush Stainless Steel Anti-Tamper Enclosure

C-Tec BF3593M Flush Stainless Steel Anti-Tamper EnclosureC-Tec BF3593M is a flush stainless steel anti-tamper enclosure for ECU-4 8 16 or 8NT.Medium depth version.

GBP 580.32

1

C-Tec ECU723 SigTEL InterfaceNetwork Communication Card

C-Tec ECU723 SigTEL InterfaceNetwork Communication CardECU-224 interfacenetwork card. Allows an ECU-224 desk controller to be connected to an ECU-4 8 or 16. Can also act as a network card if networking is required. NOT compatible with ECU-8NT Controllers.The ECU723 transmits speech via a single wiring loop and digital data via two linear RS485 networks. The network should be connected using 4 x 2-core 1.5 mm2 enhanced fire-rated cable. Max. length of all networks is 1 km.An optional system expansion device.Allows anECU-224 desk controller to be connected to an ECU-4 8or16 SigTEL controller to simplify call handling on larger SigTEL applications.Mounts inside an ECU-4 8 or 16 can alsobe used tonetworkthe ECU-4 8 or 16 to another controller if required.Not compatible with ECU-8NT controllers.See schematicfull instructions for further details

GBP 108.77

1

C-Tec BF431CF19 FUL Squashni G3 24V Ceiling Base Sounder White

C-Tec BF431CF19 FUL Squashni G3 24V Ceiling Base Sounder WhiteThe third generation Squashni G3 amalgamates the best features from the previous Squashni and Squashni Micro versions. The large flat surface allows the mounting of a large range of European detectors while the high efficiency and low operating current permit compatibility with many systems.Key FeaturesFixing platform for most popular detectorsLow current consumptionTamper proof cover for standalone useFirst fix base for easier installationCombined sounder beacon version availableLED triggered version availableMED certification

GBP 50.16

1

C-Tec ECU-224 SigTEL 224 Line Desk Controller

C-Tec ECU-224 SigTEL 224 Line Desk ControllerOptional 1-224 line SigTEL Desk Controller with handset display. Requires an ECU723 fitted at an ECU-4 8 or 16 Controller. ECU-224s are NOT compatible with ECU-8NT Controllers.A new 224line Desk Controllerfor use with our SigTEL disabled refuge fire telephone and stadium marshallingsystem.Allows operators to communicate with up to 224disabled refuge or fire telephone outstations.Designed to simplify call-handling on larger EVC installations.Must be connected to an ECU-4 8 or 16 master controller viaan ECU-723 interfacenetwork card.Although designed to be free-standing an optional sloping wall mounting shelf is available order code ECUWMB.See schematicfull instructions for further details.

GBP 968.15

1

C-Tec ECU722 SigTEL Network Communication Card

C-Tec ECU722 SigTEL Network Communication CardNetwork card allows up to 14 ECU-4 8 16 or 8NTs to be interlinked. To network a controller that has an optional ECU-224 desk controller fitted use an ECU723 interfacenetwork card instead.The ECU722 card transmits speech via a single wiring loop and digital data via two linear RS485 networks. The network should be connected using 4 x 2-core 1.5 mm2 enhanced fire-rated cable. Max. length of all networks is 1 km.Key FeaturesAn optional system expansion device.Allows up to 14 ECU-4 8 16 or 8NT SigTEL controllers to be interlinked.One card required per networked SigTEL controller.Allows systems of up to 224 lines 14x ECU-16controllers to be easily set-up.Any ECU-4ECU-8 or ECU-16 can take control of the system at any time by the input of a special code.Note that for networked systems that do not require multiple control points controllers without handsets are available ECU-8NT.IMPORTANT To network a controller that has an optional ECU-224 desk controller fitted use an ECU723 interfacenetwork card instead of an ECU722 the ECU723 is due for release Nov 2019.

GBP 90.65

1

C-TEC XFP501ECA XFP 1 Loop 16 Zone Panel C-TEC CAST. Max. 2 x 3.2Ah Batteries

C-TEC XFP501ECA XFP 1 Loop 16 Zone Panel C-TEC CAST. Max. 2 x 3.2Ah BatteriesC-TECs tried and trusted XFP oneloop 16zoneaddressable fire alarm panel - now available with C-TECs own digital fire alarm system protocol CAST and fully certified to EN54 parts 2 4 and 13.With a powerful 40V 500mA loop driver allowing the connection of up to 255 CAST devices the installation of a cost-effective feature-packed addressable fire alarm system has never been easier.Always thought of the XFP as an entry-level fire panel Think again. Thanks to CASTs multiple type codes high speed data transmission and two speedy soft addressing options automatic via the panel or manually via a handheld programmerdevice tester it is undoubtedly one of the most powerful single loop fire panels around. This and its ability to sit on a network of up to 8 XFP master panels makes it ideal for use in small to medium sized stand-alone applications and larger more sophisticated installations alike.Protocol FeaturesCAST is the worlds most-advanced distributed intelligence fire alarm system protocol. Conceived designed and realised by C-TEC as part of a five-year multi-million pound project it involved the creation of a powerful proprietary communication protocol C-TEC Addressable System Technology CAST and multiple control panels field devices. Now available to purchase.Key Features 255 devices per loop. Autonomous decision-making for faster response times. Multiple type codes. 40V loop drive voltage. Two soft addressing options automatic via the panel or manual via a powerful handheld programmer. Powerful multi-level addressing facilitates easy device addition and swapped device identification. Multiple functionality at a single address integrated devices - due 2021. Volumes tones detector modes can be changed at compatible panels. High-speed data transmission and robust data transfer. Provides geographical location of short and open circuit faults a short circuit isolator is included as standard in every CAST field device. Replace device function. Programmable multi-function status LED. Future seamless integration with other CAST life safety systems reducing energy servicing installation and repair costs. ENVISION Enabled - fully compliant with our new ENVISION Cloud-based Fire IoT Remote Access System Test and Site Management software package. Designed and manufactured in the UK.Panel Features Certifiedto EN54-24 by the Loss Prevention Certification Board LPCB and EN54-13 by Kiwa Telefication. Two independently programmable conventional sounder circuits. Two programmable inputs. A fault output relay and three programmable relay outputs with voltage free changeover contacts. A selection of zone dependencycoincidence functions. A daynight building occupiedunoccupied function. An investigation delay period function. Phased evacuation facility. An alarm counter that records how many times the panel has been in alarm state. Powerful short circuit protected loop drivers. An integral EN54-4A2 switch mode. Adjustable contamination levels. Earth fault monitoring. Combined keypad keyswitch entry to Access Levels 2 and 3. 500 event monitoring. An intuitive Windows based upload-download PC program. Up to eight XFP main panels any variant can be connected onto a two-wire RS485 non-redundantnetwork. Alternatively up to eight XFP repeaters can be connected to any non-networked main panel.Cast Commissioning Services available with this Equipment

GBP 381.44

1

C-Tec Glazed Stainless Steel Enclosure - Deep BF3593D

C-Tec Glazed Stainless Steel Enclosure - Deep BF3593DAn attractive flush-mounting glazed stainless steel enclosure designed for use with SigTEL Master Controllers. Compatible products include ECU-4 ECU-8 and ECU-16 Master Controllers.Kye FeaturesOptionalBF3593CL Camlock kit or BF3593SL Electromagnetic solenoid lock kit also available.Helps protect SigTEL controllersfrom unauthorised accesstampering.High quality brushed stainless steel finish.Picture shows a BF3593D enclosure with a SigTEL 4 Line Controller.

GBP 617.30

1

C-Tec SAP501ECA SAP Sprinkler Panel 1 Loop 16z CAST

C-Tec SAP501ECA SAP Sprinkler Panel 1 Loop 16z CASTA 1 loop SAP Sprinkler Panel on the CAST protocol.Key FeaturesIdeal for monitoring up to 255 sprinkler flow switchesOne CAST CA730 input output unit required per monitored flowswitchUtilises the same technology as C-TECs popular XFPaddressable fire panelUp to 16 sprinkler zone indicators available assignable viathe panels PC programming toolsAttractive flush or surface mountable plastic enclosureCombined keypad or keyswitch entry

GBP 416.69

1

C-Tec BF3593S Stainless Steel Glazed Enclosure

C-Tec BF3593S Stainless Steel Glazed EnclosureAn attractive flush-mounting glazed stainless steel enclosure ideal for housing a number of C-TEC-manufactured control panels. Compatible products include XFP 1-2 loop 32 zone fire panels and Quantec controllers. It helps protect control equipment from unauthorised accesstamperingKey FeaturesHigh quality brushed stainless steel finishPicture shows a BF3593S enclosure with an XFP 1 Loop 32 Zone panel fittedTechnical InformationCompatibility Suitable for use with XFP 1-2 Loop 32 Zone Fire Panels QT601-2 Quantec Controllers ENU-8NT SigTel Controllers without handsetsDimensions mm 725W x 448H x 103D overall dimensions 650W x 370H mm back box 725H x 448H x 10D mm bezel. Flush mount depth for wall-mounting 93mm.Construction Polycarbonate front window Brushed stainless-steel door and bezel Mild steel back-box.Weight 9.3Kg

GBP 566.82

1

C-Tec QT608CD Quantec Corridor Display with No Controls

C-Tec QT608CD Quantec Corridor Display with No ControlsA 16 character x 2 line display used to indicate incoming calls in corridors staff rooms nursing stations etc. Shows call type call location and depending on the device used to make the call the User ID or name of the person calling.Key FeaturesHighest priority calls are shown first with a message saying how many calls are waiting.Flash and sounderrates intensify to reflect the urgency of incoming calls.Adjustable contrast and volume controls.External sounder connection.

GBP 214.24

1

C-Tec QT6882 Quantec Hi-Output Addressable Sounder

C-Tec QT6882 Quantec Hi-Output Addressable SounderA programmable hi-output addressable sounder operatingat up to 85dBA. Designed to increase call indication levels in large Quantec sites. Can be configuredto sound when certain groups of call points are calling. Canbe assigned one of 16 different tones four of which are HTM2015 compliant for each of Quantecscall statesusing aQT423 configurator.Key FeaturesDefault operation utilises Quantecs standard tones.Adjustable daynight volumecontrols.Connections for an optional slave overdoor light.Mounts on a standard UK 25mm single gang flush or surface back box.

GBP 79.13

1

C-Tec QT608CDSS Quantec Stainless Steel Corridor Display with No Controls

C-Tec QT608CDSS Quantec Stainless Steel Corridor Display with No ControlsA 16 character x 2 line display used to indicate incoming calls in corridors staff rooms nursing stations etc. Shows call type call location and depending on the device used to make the call the User ID or name of the person calling.Key FeaturesHighest priority calls are shown first with a message saying how many calls are waiting.Flash and sounderrates intensify to reflect the urgency of incoming calls.Adjustable contrast and volume controls.External sounder connection.

GBP 260.87

1

C-Tec S-KEY Spare Key for CFP Panels

C-Tec S-KEY Spare Key for CFP PanelsA spare plastic S-KEY for use C-TECs CFP XFP and ZFP fire panels.Key FeaturesProvides authorised users with access to a fire panels authorised user controlsFinished in red polycarbonate for extra strengthSuitable for use with the C-Tecs CFP 2-8 zone standard economy and AlarmSense fire panels C-Tecs XFP 1 Loop 16 Zone panel and C-Tecs full range of ZFP multi-loop addressable fire panelsDimensions 47w x 25h x 9d mmRed polycarbonate

GBP 1.93

1

C-Tec EVC385 Grey Flush Bezel

C-Tec EVC385 Grey Flush BezelA bezel allowing SigTEL Master ExpansionControllersto be semi-flush mounted.Key FeaturesAttractive slimline design.Finished in mild steel.Front face when in situmeasures 456 W x 293 H mm.Hole required to accommodate the bezel and the Controlleris412 W x 255 H x 50 D mm.

GBP 30.61

1

C-Tec QT385 Flush Bezel for Quantec Controller

C-Tec QT385 Flush Bezel for Quantec ControllerBezel allowing QT601-2 Quantec Controllersto be semi-flush mounted.Key FeatuersAttractive slimline design.Finished in mild steel.Front face when in situmeasures 456 W x 293 H mm.Hole required to accommodate the bezel and the Controlleris412 W x 255 H x 50 D mm.

GBP 38.93

1

C-Tec XFP385 XFP Flush Mounting Bezel

C-Tec XFP385 XFP Flush Mounting BezelAllows XFP 1-2 Loop 32 Zone FirePanels to be semi-flush mounted.Key FeaturesAttractive slimline design.Finished in mild steel.Front face when in situmeasures 456 W x 293 H mm.Hole required to accommodate the bezel and the fire panel is412 W x 255 H x 50 D mm.

GBP 32.59

1

Brand

Merchant

Price (EUR)