56 results (0,13512 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Baldwin Boxall Q1233 16-way Button Card For Omnicare Control Panels

Baldwin Boxall Q1233 16-way Button Card For Omnicare Control Panels

Baldwin Boxall Q1233 16-way Button Card For Omnicare Control PanelsA 16-way button card designed for use with Omnicare Control PanelsAbout The Omnicare RangeOmniCare EVC system is a Loop Wired Emergency Voice Communication system which features Disabled Refuge standard and Advance options Type B Fire Telephone Type A Combined RefugeFire Telephone Outstation Type C Steward Telephone Type A and Emergency AssistanceDisabled Toilet Alarm facilities. Fully expandable it enables up to 127 outstations per system.Emergency Voice Communication EVC systems provide two-way communication between building management or emergency services and people inside a building who require assistance with evacuation in an emergency. Communication is made between a central location point and a number of points known as outstations located around a building or building complex.The OmniCare system was the first of its kind when introduced as a combined EVC system. Since then it has been installed throughout the world becoming the system of choice for many. The system includes a three-part toilet alarm kit option which like all of the remote units is powered from the line no local power is required.

GBP 209.57
1

Baldwin Boxall 16 Zone Intelligent Paging Microphone BDM416

Baldwin Boxall 16 Zone Intelligent Paging Microphone BDM416

Baldwin Boxall 16 Zone Intelligent Paging Microphone BDM416BDM400 microphones for public address and voice alarm systems. The BDM400 range of intelligent paging microphones is designed to provide a wide variety of features to suit any installation. There are six microphones available in the range one-zone to 32-zone.Key FeaturesAvailable in six versions - from one-zone up to 32-zone.Communicate with the main control system via an RS485 link.A standard RJ45 CAT5 network cable is used to carry both audio and serial data.Microphones can be linked together via wall sockets - product code BMS8 and connected to a single input at the control rack.The BDM401 can also be operated as a parallel microphone. This option is selected internally by jumpers. Factory setting is for serial operation.Ergonomic design with all buttons and indicators mounted behind a stylish overlay that allows zone button labels to be inserted and protected.The dynamic cardoid microphone capsule can be set for either monitored or unmonitored use during configuration.Zone status indicators show if a zone is currently selected or in use.All call paging except BDM401.Speak now indicator to show the user when a pre-announcement chime has finished.Simple bar graph display shows the user the current speech volume ensuring a clear announcement is made.Data and DC indicators to show the unit is functioning correctly.Zonal fault indicators are included to show when a fault is evident on the system.Fault accept button.Option to fit flip-top switches to enable DVA digital voice announcement messages to be broadcast.

GBP 863.65
1

Baldwin Boxall VIGIL2 Slave Router BVRD2S adds 12 Inputs 16 Outputs and 12 Messages

Baldwin Boxall VIGIL2 Slave Router BVRD2S adds 12 Inputs 16 Outputs and 12 Messages

Baldwin Boxall VIGIL2 Slave Router BVRD2S adds 12 Inputs 16 Outputs and 12 MessagesVIGIL EVAS slave units enable expansion of the EVAS BVRD2M DSP-controlled router. There are currently two models in the range.Key FeaturesUp to five slave units can be added to each BVRD2M master - enabling a maximum total of 68 inputs 87 outputs and 30 messages.Adding a BVRD2S to a BVRD2M increases the number of inputs available by twelve the number of outputs by sixteen and adds another twelve messages.Adding a BVRD2SLT to a BVRD2M increases the number of inputs available by six the number of outputs by eight and adds another six messages.The slave units mount directly on top of the master unit.To minimise rack wiring the power and communications between master and slave units are through an internal data link.All connections are made to the BVRD2S using RJ45 connectors.The bypass all call enable switch can be used to prevent an all call message from being broadcast to the selected outputs. This is often used if one of the outputs is being used as a local monitor.The BVRD2SLT can be upgraded to a BVRD2S providing a solution for future system expansion this is a factory fit upgrade.

GBP 3177.92
1

Baldwin Boxall Omnicare Mini EVC Control Panel 16-way BVOC16M

Baldwin Boxall Omnicare Mini EVC Control Panel 16-way BVOC16M

Baldwin Boxall Omnicare Mini EVC Control Panel 16-way BVOC16MOmnicare is a loop wired addressable emergency voice communication system that allows disabled refuge fire telephones steward telephones and disabled toilet alarms to be connected to one panel. Omnicare can be easily networked with the ability to add multiple control panels on a system. This enables local zonearea control with gatehousemanagement control on a master panel.The control panel features an output for an external call indicator. This is designed for use in situations where the control panel is mounted in an unmanned area. Using this output a remote indicator can be fitted in a location where it is visibleheard such as in a reception area. The output has a programmable delay feature so that calls answered at the panel are not relayed to the remote lampbuzzer indicator.Panel options include sizes from four-way up to 128-way and are supplied with the relevant batteries for backup should the mains power fail. Four-way up to 128-way versions of the control panel available in either grey or stainless-steel finish. Omnicare has been designed and built to meet BS99992008 BS5839-92011 and BS83002009 for the disabled toilet alarm.Key FeaturesDigital audio full duplex or speech steered remote dependent.One master and multiple slaves can be networked on one system panels are configured on installation.Surface mountable or optional flush mounting with bezel.Dedicated button control for each outstation with status LED indicators.Lockable glazed door.Remote units are connected to the master control panel in a loop configuration using fire rated enhanced four-core cable. OmniCare cabling networking.Fully monitored and battery backed separate box to house batteries supplied with panels larger than 32-way.The system is addressable via the remote units.System BenefitsMultiple masterslave panels can be linked in one system.Full system monitoring.Choice of outstations including disabled toilet alarms addressable via the remote unit.Link to fire detection system prevents hoax disabled refuge calls toilet alarms and fire telephones remain active. Can be completely or partly overridden.Speech steered disabled refuge remotes and full duplex speech fire telephones and emergency telephones.Battery backed for use in the event of mains power failure 24 hours in standby plus three hours use as standard. These times can be increased if required. Please contact our Sales Department for advice.Wired in a loop configuration.

GBP 1843.43
1

Baldwin Boxall BVOCTSC16 OmnicarePLUS Local Control Panel 16-Way

Baldwin Boxall BVOCTSC16 OmnicarePLUS Local Control Panel 16-Way

Baldwin Boxall BVOCTSC16 OmnicarePLUS Local Control Panel 16-WayOmnicarePLUS makes it possible for very large disabled refuge fire telephone EVC systems to be installed.Up until now it has not been possible to install super large EVC systems. However this has all changed you can now have as many as 8064 outstations on a single system We agree that it is extremely unlikely that a system of this size would be required but what it means is that the restrictions have now been liftedOverall site-wide system master control is carried out by the use of a graphic layout on a touch screen PC. The graphic on the screen is multi-layer providing the user with an easy-to-use and instantly recognisable interface for the system.OmnicarePLUS is not limited to a single touch screen control point additional ones can be added to the system enabling placement in alternative control or security rooms. These will be slavesmimic panels unless full control is transferred to the panel due to compromise of the master control point or if required by the users.For local area control i.e. control of the outstations on a single floorareabuilding block specially designed Omnicare panels are employed. Up to 64 outstations can be connected to a local area control panel. Each local area control panel is able to communicate with the outstations connected to that unit.A standard Omnicare system has the ability to connect to a maximum of 127 outstations. The development of OmnicarePLUS has enabled the installation of much larger scale systems. OmnicarePLUS is made up of multiple BS5839-9 compliant local systems which are then connected to form a network. The benefit of OmnicarePLUS is the ability to communicate with any outstation on any part of the network from a single point. This sitewide control is via a graphical touch screensKey FeaturesAbility to connect up to 125 local control points each with 64 outstations - making it possible to connect up to 8000 remotes.Compatible with the entire range of Omnicare outstations.Choice of copper and fibre single or multi-mode networking.Multi-layer graphical touch screen control - see the location of the remote calling.Automatic incoming call queuing with indication of number of waiting calls.Multiple touch screen control locations with optional mimicking of status and faults.Incoming call logging and audio recording via touch screen control locations.All site wiring fully monitored for faults and any faults will be reported and recorded in a time and date stamped log.The network is fault tolerant so that the system will continue to operate in the presence of a single fault.Calls can be accepted locally at Omnicare panels.Optional pin number-based access control at touch screen control locations.Activity reporting including faults detected with date and time stamp.All call announcements can be made via an MCP - paging will be heard at all fire telephones steward telephones and occupied disabled refuge points.A conference call can be initiated from the MCP or an LCP to communicate with the fire and steward telephones connected to a single LCP.System DesignEach OmnicarePLUS project is unique. We have a qualified team that will design build and test the system to suit your specification. If you have a requirement for a particularly large EVC system then please contact our Sales Team who will be happy to discuss your options.

GBP 6913.78
1

Baldwin Boxall BVOC16M72 Omnicare Mini EVC Control Panel 16-Way - 72 Hours

Baldwin Boxall BVOC16M72 Omnicare Mini EVC Control Panel 16-Way - 72 Hours

Baldwin Boxall BVOC16M72 Omnicare Mini EVC Control Panel 16-Way - 72 HoursOmnicare is a loop wired addressable emergency voice communication system that allows disabled refuge fire telephones steward telephones and disabled toilet alarms to be connected to one panel. Omnicare can be easily networked with the ability to add multiple control panels on a system. This enables local zonearea control with gatehousemanagement control on a master panel.The control panel features an output for an external call indicator. This is designed for use in situations where the control panel is mounted in an unmanned area. Using this output a remote indicator can be fitted in a location where it is visibleheard such as in a reception area. The output has a programmable delay feature so that calls answered at the panel are not relayed to the remote lampbuzzer indicator.Panel options include sizes from four-way up to 128-way and are supplied with the relevant batteries for backup should the mains power fail. Four-way up to 128-way versions of the control panel available in either grey or stainless-steel finish. Omnicare has been designed and built to meet BS99992008 BS5839-92011 and BS83002009 for the disabled toilet alarm.Key FeaturesDigital audio full duplex or speech steered remote dependent.One master and multiple slaves can be networked on one system panels are configured on installation.Surface mountable or optional flush mounting with bezel.Dedicated button control for each outstation with status LED indicators.Lockable glazed door.Remote units are connected to the master control panel in a loop configuration using fire rated enhanced four-core cable. OmniCare cabling networking.Fully monitored and battery backed separate box to house batteries supplied with panels larger than 32-way.The system is addressable via the remote units.System BenefitsMultiple masterslave panels can be linked in one system.Full system monitoring.Choice of outstations including disabled toilet alarms addressable via the remote unit.Link to fire detection system prevents hoax disabled refuge calls toilet alarms and fire telephones remain active. Can be completely or partly overridden.Speech steered disabled refuge remotes and full duplex speech fire telephones and emergency telephones.Battery backed for use in the event of mains power failure 24 hours in standby plus three hours use as standard. These times can be increased if required. Please contact our Sales Department for advice.Wired in a loop configuration.

GBP 2017.61
1