20 results (0,15480 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Apollo AlarmSense Open Area Sounder Beacon 55000-017APO

Apollo AlarmSense Open Area Sounder Beacon 55000-017APO

Apollo AlarmSense Open Area Sounder Beacon 55000-017APOThe AlarmSense open area sounder beacon has a sound output of 99dB at 1 metre and gives a visual warning if the fire alarm system is activated. A maximum of five open area alarm devices can be connected to each zone of an AlarmSense conventional panel system.Key Features Combined sounder and beaconLPCB approvedIP65 rated - suitable for outdoor useFault warning is generated during unauthorised sounderbeacon head removalTone and flash sychronisation - achieved from the control panelDesigned for use as part of an AlarmSense conventional fire alarm panel systemBase is wired as a first-fix unitWall mountedOther devices on the same zone will operate if the sounderbeacon head is removed

GBP 49.93
1

Apollo SA5501-320APO Open-Area VID White Body White Flash

Apollo SA5501-320APO Open-Area VID White Body White Flash

Apollo SA5501-320APO Open-Area VID White Body WhiteFlashThe Intelligent Open-Area VID is designed for use inopen-areas and can be connected to any CoreProtocol Discovery and XP95 system.The Intelligent Open-Area VID includes features such asgroup individual control and status reporting all configured through the firecontrol panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorVariable flash rate 0.5 Hz or 1 HzAvailable in red or white flash

GBP 44.77
1

Apollo SA5501-321APO Open-Area VID White Body Red Flash

Apollo SA5501-321APO Open-Area VID White Body Red Flash

Apollo SA5501-321APO Open-Area VID White Body Red FlashThe Intelligent Open-Area VID is designed for use inopen-areas and can be connected to any CoreProtocol Discovery and XP95 system.The Intelligent Open-Area VID includes features such asgroup individual control and status reporting all configured through the firecontrol panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorVariable flash rate 0.5 Hz or 1 HzAvailable in red or white flash

GBP 44.77
1

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red Flash

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red Flash

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red FlashThe Intelligent Open-Area Sounder VID is designed for use inopen-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features suchas group global and individual control status reporting and selectable toneand volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volumelevelsSoftware defined group addressing with up to 16 groupaddressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5501-351APO Open-Area Sounder VID White Body Red Flash

Apollo SA5501-351APO Open-Area Sounder VID White Body Red Flash

Apollo SA5501-351APO Open-Area Sounder VID White Body Red FlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individual address which is set with the appropriate XPERT address card. Group address on CoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5500-350APO Open-Area Sounder VID Red Body White Flash

Apollo SA5500-350APO Open-Area Sounder VID Red Body White Flash

Apollo SA5500-350APO Open-Area Sounder VID Red Body WhiteFlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5501-350APO Open-Area Sounder VID White Body White Flash

Apollo SA5501-350APO Open-Area Sounder VID White Body White Flash

Apollo SA5501-350APO Open-Area Sounder VID White Body White FlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individual address which is set with the appropriate XPERT address card. Group address on CoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo Series 65 End-of-Line Relay Base - 24V 45681-248APO

Apollo Series 65 End-of-Line Relay Base - 24V 45681-248APO

Apollo Series 65 End-of-Line Relay Base 24V - 45681-248OperationSeries 65 Relay Bases are primarily intended for use with control units using 4-wire detector supply and alarm initiating circuits. Where local codes allow they may also be used in 2 and 4-wire circuits to provide volt-free control signals to an auxiliary system such as an automatic door closer. They are not suitable for use in systems where it is specified or required that operation of the auxiliary system shall be fail-safe and must not be used with any other type of detector.Options45681-247 for circuits having a supply voltage between 9- and 18-volts DC and 45681-248 for circuits having a supply voltage between 16 and 33 volts DC.Product InformationThe Series 65 End-of-Line EOL Relay Base is intended for use with four-wire circuits and features two sets of changeover contacts and a power supervision relay.Key FeaturesDetector locking mechanismOne way fitEasy to wireContains an earth connector

GBP 22.14
1

Apollo Series 65 End-of-Line Relay Base 12V - 45681-247APO

Apollo Series 65 End-of-Line Relay Base 12V - 45681-247APO

Apollo Series 65 End-of-Line Relay Base 12V - 45681-247OperationSeries 65 Relay Bases are primarily intended for use with control units using 4-wire detector supply and alarm initiating circuits. Where local codes allow they may also be used in 2 and 4-wire circuits to provide volt-free control signals to an auxiliary system such as an automatic door closer. They are not suitable for use in systems where it is specified or required that operation of the auxiliary system shall be fail-safe and must not be used with any other type of detector.Options45681-247 for circuits having a supply voltage between 9- and 18-volts DC and 45681-248 for circuits having a supply voltage between 16- and 33-volts DC.Product InformationThe Series 65 End-of-Line EOL Relay Base is intended for use with four-wire circuits and features two sets of changeover contacts and a power supervision relay.Key FeaturesDetector locking mechanismOne way fitEasy to wireContains an earth connector

GBP 22.14
1

Apollo SA4700-302APO Intelligent DIN-Rail Input Output Unit

Apollo SA4700-302APO Intelligent DIN-Rail Input Output Unit

Apollo SA4700-302APO Intelligent DIN-Rail Input Output UnitThe Intelligent DIN-Rail InputOutput Unit providessupervision of one or more normally open volt free contactsconnected to a single pair of cables and a set of changeoverrelay output contacts. Compatible with XP95 Discovery and CoreProtocol digital communication protocols.Mechanical ConstructionThe Intelligent DIN-Rail InputOutput Unit is designed to be mounted on a 35 mm width DIN-Rail inside an enclosure.Key FeaturesImproved design for ease of wiring meaning faster installationContains controllable isolatorAddress range 1 - 254Nine pre-configured modes including compatibility mode from XP95Discovery to CoreProtocol systemsFailsafe mode meets BS 7273-4 requirementsConfigurable input stylesEarth fault monitoring

GBP 56.90
1

Apollo SA4700-300APO Intelligent DIN-Rail Switch Monitor

Apollo SA4700-300APO Intelligent DIN-Rail Switch Monitor

Apollo SA4700-300APO Intelligent DIN-Rail Switch MonitorThe Intelligent DIN-Rail Switch Monitor is designed tomonitor the state of one or more single pole volt-free contactsconnected on a single pair of cables and to report the status.It has a selectable status reporting delay making it suitable formonitoring flow switches. Compatible with XP95 Discovery and CoreProtocol digital communication protocols.Mechanical ConstructionThe Intelligent DIN-Rail Switch Monitor is designed to be mounted on a 35 mm width DIN-Rail inside an enclosure.Key FeaturesImproved design for ease of wiring meaning faster installationContains controllable isolatorAddress range 1 - 254Five pre-configured modes including compatibility mode from XP95Discovery to CoreProtocol systemsConfigurable input stylesEarth fault monitoring

GBP 47.69
1

Apollo XP95 DIN-RAIL Zone Monitor with Isolator - 55000-812APO

Apollo XP95 DIN-RAIL Zone Monitor with Isolator - 55000-812APO

Apollo XP95 DIN-RAIL Zone Monitor with Isolator - 55000-812APOThe DIN-Rail Zone Monitor with Isolator powers and controls a zone of up to 20 Apollo Series 65 or Orbis fire detectors in a Discovery or XP95 loop.OperationThe DINRail Zone Monitor is factory preset to return an analogue value of 16 when all detectors on the zone are in the quiescent state and 64 when a detector changes to the alarm state. The unit latches in the alarm state. A 5.1k end-of-line resistor is used to monitor cables for open and short-circuit faults. Alternatively an active end-of-line monitor may be used in conjunction with diode bases and a capacitor of up to 50uF fitted at the unit wiring terminals. In either case an analogue value of 4 is transmitted during open or short-circuit faults.The DINRail Zone Monitor is fitted with a bi-directional short-circuit isolator and will be unaffected by loop short-circuits on either loop input or output. For IS applications use DIN-Rail IS Zone Monitor part number 55000-798.Key FeaturesLoop-poweredVisible short-circuit and alarmLEDs Built-in Isolator

GBP 81.07
1

Apollo Marine DIN-Rail Zone Monitor 55000-773MAR

Apollo Marine DIN-Rail Zone Monitor 55000-773MAR

Apollo Marine DIN-Rail Zone Monitor 55000-773MARThe Marine DINRail Zone Monitor powers and controls the operation of a zone of up to 20 conventional fire detectors from a loop of XP95 addressable detectors and ancillary devices.OperationThis unit needs to be installed in a suitable enclosure and secured using end stops part no 27447-528 or equivalent. The Marine DINRail zone monitor is factory pre-set to return an analogue value of 16 when all detectors on the zone are in the quiescent state and 64 when a detector changes to the alarm state.The unit latches in the alarm state. A 5.1K end-of-line resistor is used to monitor cables for open and short-circuit faults. Alternatively an active end-of-line monitor may be used in conjunction with diode bases and a capacitor of up to 50F fitted at the unit wiring terminals. In either case an analogue value of 4 is transmitted during open or short-circuit faults.The Marine DINRail zone monitor is fitted with a bi-directional short-circuit isolator and will be unaffected by loop short-circuits on either loop input or output.Key FeaturesLoop-poweredVisible short-circuitLED Built in isolator

GBP 112.91
1

Apollo AlarmSense Open Area Sounder 55000-018APO

Apollo AlarmSense Open Area Sounder 55000-018APO

Apollo AlarmSense Open Area Sounder 55000-018APOThe AlarmSense open area sounder has an IP65 rating meaning that it is suitable for outdoor use. In the event of unauthorised sounder head removal the unit generates a fault warning but all other devices on the same zone will continue to operate.Brand InformationAlarmSense is a range of conventional fire detection and alarm products designed to be connected to the same pair of supply wires making installation quicker and less expensive.AlarmSense has been developed to make the design and installation of a fire detection and alarm system easier and more economic for small to medium-sized buildings. The range also allows an existing system to be extended or modified if necessary. This flexibility makes AlarmSense an excellent choice for use in HMOs House in Multiple Occupation.As you would expect from Apollo AlarmSense incorporates features that help reduce false alarms and patented technology to ensure the integrity of a system. The range also includes products such as beacons to help meet the requirements of the Disability Discrimination Act DDA.Brand FeaturesAlarmSense sounders and manual call points are fitted to the same zone as detectors. In quiescent state the zone is powered at between 9V and 15V nominally 12V at which only detectors and call points operate. Sounders require 24V to operate.When an alarm is detected on a zone the control panel increases the line voltage to 24V on that zone causing the sounders to produce a continuous Evacuate sound. Any voltage-sensitive output devices - relay modules or other alarm devices - also operate.When the voltage is increased to 24V the detector alarm current will reduce to 1.5mA. The detectors are latched in alarm until they are reset by reducing the voltage to less than 2V for greater than 1 second. Output devices will de-activate each time the voltage is reduced to 12V unless otherwise stated in their specification.It is possible to generate an Alert tone by pulsing the supply voltage from 12V to 24V and the sounders configured to continuous output. Pulse frequency of 1 second on 1 second off is recommended for compliance with BS5839 Pt1.Key Features Sound output of up to 99dBLPCB approvedSeparate first-fix base for ease of installationIP65 rated outdoor useDesigned for use as part of an AlarmSense fire alarm panel systemWall mountedTone synchronisationMonitors the presence of the sounder head

GBP 40.24
1

Apollo XP95 DIN-Rail Sounder Controller 5 Amperes 55000-182APO

Apollo XP95 DIN-Rail Sounder Controller 5 Amperes 55000-182APO

Please note This product currently has an extended leadtime due to a component shortage. Please contact us for further information.Apollo XP95 DIN-Rail Sounder Controller 5 Amperes 55000-182APOThe DIN-Rail Sounder Controller 5 Amperes is used to control the operation of a zone of externally powered sounders and report their status to the control panel.Electrical DescriptionThe DIN-rail Sounder Controller is loop powered and operates at 1728V DC. It requires a local power supply of 1235V DC to power the external load which may be up to 5A. A polarising diode is required with each alarm device as sounders are operated by voltage reversal provided by a double-pole change-over relay. The sounder circuit is protected by a fuse rated at 5A quick acting.OperationThe Sounder Controller allows sounders to be operated continuously or be pulsed 1 second on 1 second off. Sounders may be operated individually or in groups and whichever address mode has been applied may be synchronised when in pulsed operation. An opto-coupled input is provided to monitor the state of the external power supply. In normal operation the Sounder Controller returns a pre-set analogue value of 16 but in the event of an open or short-circuit fault or of a fault in the external power supply the unit returns a pre-set analogue value of 4.Key FeaturesAllows sounders to be operated continuously or be pulsed 1 second on 1 second offMay be synchronised with loop soundersAn opto-coupled input is provided to monitor the state of the external power supplyFeatures group addressingWill accept a load of up to 5A

GBP 97.03
1

Apollo SA5501-300APO Open-Area Sounder White Body

Apollo SA5501-300APO Open-Area Sounder White Body

Apollo SA5501-300APO Open-Area Sounder White BodyThe Intelligent Open-Area Sounder is designed for use inopen-areas and can be connected to anyCoreProtocol Discovery or XP95 system. The Intelligent Open-Area Sounder includes features such as groupand individual control status reporting and selectable tone and volume settings all configuredthrough the fire control panel.The right tone for the installationThe Intelligent Open-Area Sounder offers a choice of 15 evacuationtones including the standard Apollo evacuation tone. A tone is selected during commissioning inorder to suit local regulations or customs.Whichever evacuation tone is selected there is a secondary tonewhich may be used for alerting or warning of a possible evacuation. The right level of soundThe sounder is set during commissioning to one of sevenlevels of sound the highest level being nominally 101 dbA at 1m. At lessthan 60 dbA the lowest level falls outside the scope of the EN54 standard. Ithas been included to provide a very local warning for the use of personnel in particularenvironments such as nurse stations in hospitals.AddressingThe Open-Area Alarm Devices respond to their own individual address which is set via the appropriate XPERTaddress card. Group address and tones on CoreProtocol systems are set using the fire control panel.Location-specific volume settingDetectors and sounder indicators are installed in manydifferent types of environment. When configuring the Intelligent Open-Area Sounder devicesthe adjustment of the volume can be done at the point of installation. The commissioning engineer simply sets the control panel to Set-upand then walks from one device to the next to set the required volume using amagnetic wand. When all devices have been set the engineer simply presses abutton on the control panel which then registers all the individual volumesettings.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesAlarm switching by individual device by group address or ofall individual devices on the loopBuilt-in controllable isolatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 46.96
1

Apollo SA5500-300APO Open-Area Sounder Red Body

Apollo SA5500-300APO Open-Area Sounder Red Body

Apollo SA5500-300APO Open-Area Sounder Red BodyThe Intelligent Open-Area Sounder is designed for use inopen-areas and can be connected to anyCoreProtocol Discovery or XP95 system. The Intelligent Open-Area Sounder includes features such as groupand individual control status reporting and selectable tone and volume settings all configuredthrough the fire control panel.The right tone for the installationThe Intelligent Open-Area Sounder offers a choice of 15 evacuationtones including the standard Apollo evacuation tone. A tone is selected during commissioning inorder to suit local regulations or customs.Whichever evacuation tone is selected there is a secondary tonewhich may be used for alerting or warning of a possible evacuation. The right level of soundThe sounder is set during commissioning to one of sevenlevels of sound the highest level being nominally 101 dbA at 1m. At lessthan 60 dbA the lowest level falls outside the scope of the EN54 standard. Ithas been included to provide a very local warning for the use of personnel in particularenvironments such as nurse stations in hospitals.AddressingThe Open-Area Alarm Devices respond to their own individual address which is set via the appropriate XPERTaddress card. Group address and tones on CoreProtocol systems are set using the fire control panel.Location-specific volume settingDetectors and sounder indicators are installed in manydifferent types of environment. When configuring the Intelligent Open-Area Sounder devicesthe adjustment of the volume can be done at the point of installation. The commissioning engineer simply sets the control panel to Set-upand then walks from one device to the next to set the required volume using amagnetic wand. When all devices have been set the engineer simply presses abutton on the control panel which then registers all the individual volumesettings.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesAlarm switching by individual device by group address or ofall individual devices on the loopBuilt-in controllable isolatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 46.96
1