173 tulokset (0,24724 sekuntia)

Näytä kaikki suodattimet

Tuotemerkki

Kauppias

Hinta (euroa)

Näytä kaikki

Nollaa suodatin

Tuotteet
Alkaen
Kaupat

MANFROTTO Levelling Base

MANFROTTO Levelling Base

The 338 is fitted between tripod and head and is used in combination with tripods that don’t have built-in levelling mechanisms. Its three adjustment dials enable the operator to make fine, finger tip adjustments up to +/- 5 degrees to ensure the camera is perfectly level. The dials also have locking rings to ensure stability once the right position is reached. A spirit level is built in for reference. The base has a 3/8” female tripod fitting and a 3/8” male head fitting.

EUR 200.90
1

MANFROTTO Pelarstativkit

MANFROTTO Pelarstativkit

Designed for 35mm and medium format cameras, the mini salon 190 allows working heights from 56cm to 182cm. Counter-balanced column is black anodised aluminium and is mounted on a heavy cast iron base with two pivoting wheels which lock firmly into place with individual wheel locks. Features smooth operating counter balanced horizontal gear driven crossarm, supplied complete with camera support platform. The crossarm support casting features a built-in accessory tray 20x28cm.

EUR 1904.90
1

MANFROTTO Jalusta Foto Alu Triman 028B

MANFROTTO Jalusta Foto Alu Triman 028B

Strong, sturdy and reliable, the triman tripod is the ideal studio tripod. The geared centre column has a non roll-back feature and has a threaded 3/8" mount on the bottom of the column to allow low angle shots. Twin shank leg design, built-in spirit level and rubber feet with retractable spikes are standard features. The tripod uses a centre column strut design for added stability. Includes a mid level spreader and carrying strap. Ideal for cameras up to medium format. Diameter legs in mm: 25,20,19 tandem. Same as 028 but black.

EUR 501.90
1

MANFROTTO Hardcase

MANFROTTO Hardcase

The new pro light reloader tough h-55 case is designed for travelling professional photographers and videographers. Hermetic, waterproof, and impact resistant, these tough cases are built to resist to the toughest conditions of use and certified to resist temperatures from °c min -33 / max +90 (°f min -27.4 / max +194 );built to perfectly protect all types of equipment contents and based on lightweight materials with a secure release latch system. They are ip67 tested meaning that there is no ingress of dust and withstands temporary immersion in water for 30 minutes. Manufactured and designed in italy, the tough h-55 is ideal for travellers who do not want to compromise between safety and portability. This case fits airline carry-on size restrictions and is provided with a two stage telescopic handle with self-locking system to prevent unwanted opening when carrying and transporting, and the automatic pressure release valve provides automatic regulation of the interior air pressure when on a flight. The two wheels have a larger diameter, silent and stable during transport, giving optimal stability, strength, and made to be durable to last over time. The new pro light reloader tough h-55 is provided with 4 layers of pre-cubed foam and convoluted foam for the lid. The convoluted foam in the lid helps to firmly keep the stored equipment when the case is closed. The 4 layers of pre-cubed foam allows you to customize the insert to your own indsividual equipment and the four layers help for an easier initial setup and arrangement. The tough h-55 features exclusive design functions that make it compatible with manfrotto tough modular accessories. Four metal pins allow you to easily attach tough tripod bag and laptop bag (sold separately) for a more modular carrying experience.

EUR 321.90
1

MANFROTTO Friktionsarm

MANFROTTO Friktionsarm

Guaranteed to give you perfect results for every shoot. This innovative photo variable friction arm is ideal for beginner photographers. The user-friendly friction arm is also a great choice for professionals looking for a flexible, robust product built to world-class standards by manfrotto in italy. Complete with interchangeable 1/4” and 3/8” adapters, it's particularly convenient when you're constantly on the move.this friction arm is manufactured with strong, portable and lightweight aluminium, which means you can frame and shoot with precision and carry it comfortably. It's also easy to set up and adjust thanks to its ergonomic handle. Use this arm interchangeably with a wide range of standard adapters so you can ensure your gear is ready for your next shoot. For maximum control, add the compatible anti-rotation adapter.

EUR 131.90
1

MANFROTTO Kuulapää Grip action 322RC2

MANFROTTO Kuulapää Grip action 322RC2

Advantages: -very low at minimum working height. -high load capacity. -easy and intuitive to use. -very flexible camera positioning. Suitable for: -"bridge" cameras (compact slr-type with built-in lenses). -slr cameras with short and/or light fixed-length lenses. -medium format cameras. Take the versatility of a ball head, add true ergonomic control and you get the 322rc2: a photographic head that allows you to unblock, move, position and lock your camera with one hand in one position thanks to the revolutionary design of its grip handle, which incorporates the ball lock lever and can also mount the optional 322rs shutter release accessory. A friction control wheel lets you regulate the power of the blocking mechanism to match the weight of your camera/lens. The 322rc2 is made from magnesium for lightweight performance, and is designed to keep the weight of your kit as close as possible to the tripod's centre of gravity by way of its reduced height. It is this fact, matched with the precision construction of the 322rc2 that gives the head its load capacity of 5kg. The 200pl quick release plate assembly can be removed and positioned for left-handed use or on the top of the grip in a vertical position like the 'traditional' 222 design, but when used in this position, max load reverts to 2.5kg capacity. Complete with built-in bubble spirit level and quick release camera plate (standard 1/4" screw, with secondary safety pin). Suitable for use with 35mm or medium format cameras. Optional plates: 200pl-38, 200plarch-14, 200plarch-38 pat. Pending -sturdy all-metal construction. -the compact, rectangular 200pl quick release plate system fits neatly under small-bodied still cameras up to slr (even with tele lenses) or small medium format, or under small video cameras or spotting scopes. Its rubber pad gives a good grip without damaging the camera, and its angled sides ensure that it also fits perfectly and tightly into a wide range of manfrotto heads. -this head features a secondary security lock so you can't accidentally release the plate (and camera) without meaning to. The lock stops the quick release lever from opening fully. -a convenient single locking mechanism blocks or frees movement on all axes for greater speed of use. -separate control for pre-setting the friction of the ball when unblocked. The position of the red line indicates the approximate amount of friction applied. -by keeping the head and camera mounting plate as low as possible, the camera is kept safely closer to the tripod's centre of gravity for more stable support. -thanks to the repositionable camera plate, this can be used right- or left-handed. Photographers are normally forced to be right-handed by the position of the shutter release button, but the advantage of this system even to right-handed users is that you can keep one hand on the grip to control framing position and switch rapidly between portrait and landscape settings, while the other hand stays on the camera, ready to shoot even with the head in movement. Keeping both hands positioned like this gives you greater control over panning or tracking shots. -designed for use with the 322rs electronic or 322rsm manual shutter release cables and mounts; the first accessories to let you control head positioning and shutter release at the same time, with the same hand, without needing to let go of the head grip. -the built-in, carefully hand-set bubble spirit level helps make sure your horizons really are horizontal.

EUR 200.90
1

MANFROTTO Jalusta Video MVT502AM

MANFROTTO Jalusta Video MVT502AM

The manfrotto mvt502am is a compact, lightweight video tripod designed for hd video-capable dslrs, camcorders and light video cameras equipped with accessories, lights, monitors and microphones. Rigid, stable and secure thanks to its telescopic twin-leg structure, ellipse-profile aluminium tubes, new leg locking collars, first-stage spreader and high-grip rubber feet, the mvt502am is also intuitively easy to use, allowing you set up faster and concentrate on filming. The 2-stage/3-section mvt502am is part of manfrotto's pro twin leg video tripod range and has a 75mm bowl (with 60mm adapter) for compatibility with professional video heads. Features:- ideal high-performance tripod for hdslrs and camcorders with accessories- rigid and stable telescopic twin-leg design with mid-level spreader- compact when closed, easy to transport with built-in carrying handle- compatible with all professional 75mm/60mm half-ball video heads- fast, simple and smooth set up with ergonomic quick release leg locking collars new rubber feet grip all surfaces and protect delicate floors.

EUR 401.90
1

MANFROTTO Kolmitiepää

MANFROTTO Kolmitiepää

The x-pro 3-way head is manfrotto’s most compact, precise and reliable 3-way photographic head.the compact closed size that makes the x-pro so easy to pack and carry is down to its retractable levers that can be extended when needed. With the levers retracted and folded for transport, the space occupied by the head is only 13cm x 13.5cm x 13.5cm (5.1” x 5.3” x 5.3”). Friction controls on the x-pro 3-way head’s tilt and portrait axes help balance the weight of camera equipment so that fine framing adjustments can be made with the locking knobs open, only locking everything down once everything’s ready. And with 3 leveling bubbles on the head, composition can be levelled precisely in-camera, reducing post production work. Sturdily built with a rugged aluminium body for reliability and durability, the x-pro supports up to 8 kg (17.6 lbs), but weighs only 1 kg (2.2 lbs).

EUR 200.90
1

MANFROTTO Jalusta Foto Alu MT190X3

MANFROTTO Jalusta Foto Alu MT190X3

The new 190x is a 3-section aluminium tripod with essential functions and excellent built-in quality.the key feature of the 190x is the ground level adaptor which allows great shooting creativity. Once placed on the top casting and combined with the 4 leg angles, it enables the tripod to reach ultra-low positions.the legs of the 190x tripod are fast to extend and adjust, thanks to the quick power lock levers that block and unblock each leg section. The qpl levers are specially designed to allow a more comfortable, stronger single-handed grip of the leg locks. From a folded position, the sections of each leg of the tripod can be released in a single movement. The qpl lever design also enables each section to lock more powerfully, making the tripod more stable and rigid than with traditional lever designs. Intuitive, ergonomic leg angle selectors allow each leg to be independently and solidly set to any of the pre-set angles, allowing even greater positioning freedom.the top casting of the 190x has an easy link connector to support a photo or video accessory (such as a led light, flash, reflector, or other piece of equipment) on an extending arm or bracket, turning the tripod into a practical mobile studio.the 190x is made in italy by manfrotto.

EUR 250.90
1

MANFROTTO Jalustasetti

MANFROTTO Jalustasetti

The befree gt xpro aluminium is the first manfrotto travel tripod developed for professional macro photographers. A new aluminium travel tripod that combines portability with maximum versatility enabling the most creative photographers to push their limits. The befree gt xpro’s se... Ttings and controls are designed to be ergonomic, intuitive, and highly portable. It features a built-in 90°column mechanism in its top casting, which stays safely stored away until needed. Not only does this system allow the camera to be offset from the tripod’s leg position, it also provides the simplest possible way to shoot from ground level or directly overhead. The tripod is kitted out with manfrotto’s advanced 496 head, a portable and powerful head that combines versatility and firmness with a great load capacity (holds up to 10kg) and independent panoramic and friction knobs for full movement control. Framing with zoom lenses is now easier and faster. The m-lock enhances the befree’s vocation as a support solution designed for rapid and secure performance on the move. It also features the unique 200pl-pro plate, made of a high-quality aluminium body, and fully compatible with manfrotto rc2 & arca-swiss type head attachments: with 2 rubber inserts that maximise grip, even on the most angled shots. The befree gt xpro aluminium travel tripod is 43cm when folded and fits perfectly in its dedicated carry bag and every kind of hand luggages. Read more

EUR 351.90
1

MANFROTTO Jalustakit 290 Xtra 496RC2 Kuulapää Alum

MANFROTTO Jalustakit 290 Xtra 496RC2 Kuulapää Alum

The perfect tripod with head set for new photographers. The 290 xtra aluminium 3-section tripod kit with ball head has everything you need in one handy bag. Designed to professional standards, this smart tripod with head kit won’t let you down, even during the most challenging situations. And it’s built to last. Fashioned from hard-wearing but lightweight aluminium, it won’t be a chore to carry, and it’s strong when up.the stand comes in 3-sections, with aluminium leg tubes and a specially designed, high-performance top casting that works under pressure, and delivers maximum stability whatever the shoot demands. Added aluminium leg locks keep everything firmly in place and can be adjusted as needed to increase tension, and this function works even after heavy use, extending the stand’s lifespan longer. Not only that, it’s super easy to use too. 4 leg angle positions give you freedom to move, and a centre column allows you to extend your height range.other great features include rubber leg warmers to give you ultimate grip whatever the weather, and a centre ball head. This makes it a full tripod with head set, and the ball head has a great spherical movement, plus a quick release plate. So you’ll be able to glide from one angle to the next while you work, and set up speedily. That way, you’ll be able to capture new frames quickly and effectively. And it comes with its very own made-to-measure shoulder bag, just to make life even easier.

EUR 220.90
1

MANFROTTO Camera Cage

MANFROTTO Camera Cage

Descriptioncamera cage small is designed for the sony a7 series and panasonic gh5 cameras, which utilize a top-mounted xlr audio module for sound recording. The minimalist design and the lightweight structure gives several mounting points for your accessories on the top and side including two anti-rotation attachment compatible with manfrotto 244micro-ar and arri standard mounting points. The cage includes a reversible top handle which can be repositioned over the lens area when an xlr adapter is in use. The handle can also fold down when packing your bag and can even be reconfigured onto the left, vertical 15mm rod for a secondary grip. Built into the handle is a cold shoe mount and a 15mm tube clamp for mounting any of wooden camera uvf mount kits used with 3rd party electronic viewfinders. Cameras with fold-out lcd screens can be positioned easily and an included hdmi cable clamp can be mounted to the vertical rod to secure video cables and prevent port damage. If lightweight 15mm support is desired, the cage may be combined with15mm baseplate to provide pass through rod support (sold separately, like manfrotto mva520w-1).

EUR 338.90
1

MANFROTTO Jalusta Kantohihna

MANFROTTO Jalusta Kantohihna

User-friendly, practical and comfortably. The tripod shoulder strap 1 is the ideal way to comfortably transport your tripod from one place to the next when you don’t want to carry a bag. This clever tripod shoulder strap is made with 190 and 055 series manfrotto tripods in mind, so getting loaded up and out the door is...  Never a hassle. It measures 4cms and is made from rubber and canvas, making it stylish and hardwearing. Using the strap is super-easy too. You simply need to fasten the steel spring clamp at the top of the tripod, and attach the other round the tripod’s feet. This positions the tripod downwards, allowing the legs to naturally direct upwards and behind your bag, meaning the weight is comfortably distributed, effectively easing the pressure on your back and shoulders. Its rubber and canvas construction keeps the strap from slipping while you’re on the move, and its heavy-duty enough to withstand wear and tear. This top-quality accessory comes with its own manfrotto warranty, and is built to last. Not only that, it provides you with a compact, durable carrying solution for busy professionals. Read more

EUR 42.90
1

MANFROTTO Jalustakit Video

MANFROTTO Jalustakit Video

The video system includes the manfrotto 526 professional fluid video head and the 645 fast twin tripod in aluminium. The 526 professional fluid video head directly addresses the high-end, heavy-duty video market by offering a feature-packed fluid video head with the ability to support up to 16 kg and counterbalance weight from 8 to 15 kg. It provides a fluid drag system comprised of three step settings for low, medium and high drag levels (numbered 1, 2 and 3), plus an additional no-drag setting (number 0) for occasions such as snap-pans/tilts. It features a continuous counterbalance system for weights between 8 to 15 kg @ 125 mm c.o.g. The built-in 100mm half-ball adapts to a number of our tripods, allowing quick camera levelling with the aid of the levelling bubble. The 645 ftt fast twin alu tripod features a double tubing and fast lever lock technology for the most robust support ever. The tripod is provided with a 2 in 1 half ball: a standard 100mm bowl compatible with a 75mm adapter (available as accessory) to enable the use of a wider range of video heads. It also features a middle spreader lock. However, the 3-angle selectors make the use of a spreader a matter of optional preference. This range was developed with the primary objective of making video shooting easier by reducing set up times and maintenance. The synchronized closure mechanisms between the upper and lower locks, enable videographers to control the entire leg with a single lock and get to work in record time. The new tripod provides maximum versatility, supporting the use of a broad choice of heads, and ensuring the utmost rigidity while also being extremely lightweight. Moreover, it comes with the 2 in 1 ground and middle telescopic spreader and it features a 3-angle selection mechanism for easy set up. It is equipped with spiked feet with rubber overshoes for a firm grip and adaptability to the most diverse shooting locations.

EUR 2214.90
1

MANFROTTO Camera Cage

MANFROTTO Camera Cage

Descriptioncamera cage large is a quick release, height adjustable cage that fits larger dslr cameras like canon 1dc, 1dx, 1dxmkii, 1dmkiv, 1dmkiii, nikond3x, d4, d4s, d5, d800, d810, and many cameras with battery grips installed. The minimalist design and the lightweight structure gives several mounting points for your accessories on the top and side including two anti-rotation attachment compatible with manfrotto 244micro-ar and arri standard mounting points. The cage includes a reversible top handle which can be repositioned over the lens area when an xlr adapter is in use. The handle can also fold down when packing your bag and can even be reconfigured onto the left, vertical 15mm rod for a secondary grip. Built into the handle is a cold shoe mount and a 15mm tube clamp for mounting any of wooden camera uvf mount kits used with 3rd party electronic viewfinders. Cameras with fold-out lcd screens can be positioned easily and an included hdmi cable clamp can be mounted to the vertical rod to secure video cables and prevent port damage. The camera cage large includes a height adjustable 15mm lightweight rod clamp for positioning 15mm rods (sold separately, like manfrotto mva523w-1) at the correct distance to the center of the lens, ensuring compatibility with standard matteboxes and follow focus units.

EUR 431.90
1

MANFROTTO Backpack

MANFROTTO Backpack

The manfrotto pro light flexloader camera backpack l is a professional camera bag specifically designed to provide unparalleled gear protection to fit the preference and workflow of any professional photographer or filmmaker.for professional photographers and filmmakers working on assignments, the camera bag that carry and protect their cameras are equally crucial in making the creative process happen.the pro light backpacks usher in the all-new m-guard™ protection system specifically designed and laboratory tested to guarantee the highest level of protection and shock resistance especially on areas of the bag where protection is most crucial. M-guard™ dividers are made of high-density eva foam that provide exceptional shock absorption while maintaining a super slim profile. In addition the sas-tec, a viscoelastic memory foam and multi-impact endurance, adds a structural reinforcement on the base of the backpack provide extra shock absorbing properties. For an even better worry-free experience, a tsa padlock can be used to secure the steel wire puller to close the main compartment.the pro light flexloader l is a backpack that literally expands to cater to your needs created for professional dslr or mirrorless photo and video gear. It features a full front access to a fully padded gear compartment with customizable interiors, a front organizing compartment in the interior panel with see-trough pockets for small accessories, multiple attachment points for tripods and sliders with extensions and an included accessory organizer pouch. The bag holds professional dslrs or mirrorless cameras with portrait grip, multiple lenses, foldable drones and more. The rear pocket is an expandable compartment that can be suitable for csc/vdslr 3-axis stabilizer gimbals and other accessories. This compartment is entirely separated from the main camera compartment and provides extra space without compromising the main compartment’s capacity.the checkpoint-friendly, designated laptop-only section holds a 15” laptop that is easy to access. This backpack is built to keep professional gear protected while providing optimal comfort even in long periods of carrying. The harness system not only distributes weight evenly from the shoulders to the waist and hips but also maximizes breathability thanks to a contoured eva mesh panel.the torso length adjustment in 3 levels, load lifters, sternum straps, shoulder straps and waist belt are all fully adjustable in length to give you the utmost flexibility and comfort.the pro light flexloader is made of water-repellant ripstop nylon/polyester fabric with reinforcement yarns to achieve a balance of light weight, unique look, and high capacity performance. The tuck-away tripod strap connection is always ready to secure a variety of professional tripod sizes, sliders and monopod. Duraflex hardware, ykk zippers, hypalon reinforcement, trims and pullers make the pack both ultra-lightweight and strong enough to withstand the most intense use to ensure long-term protection for large amounts of gear. It also conveniently comes with a duoface sun/rain cover, which provides extra protection in rough weather and reflects sunlight, keep gear cool and dry all day long.

EUR 382.90
1